This code reads the PLL configuration registers and correctly programs
things so the UART and such can come up.
There's MIPS74k platform issues that need fixing; but this at least brings
things up enough to echo stuff out the serial port and allow for interactive
debugging with ddb.
Tested:
* AR71xx SoCs
* AR933x SoC
* AR9344 board (DB120)
Obtained from: Qualcomm Atheros; Linux/OpenWRT
For all pre-AR933x chips, the frequency is just the APB frequency.
For the AR933x, the UART frequency is different but we just hacked around
it.
For the AR934x, there's a different PLL setting for these, so they have
to be broken out.
the attribute bitmap argument would be non-zero. This caused an
interoperability problem for a recent patch to the Linux NFSv4 client.
The Linux folks have changed their patch to avoid this, but this
patch fixes the problem on the server.
Reported and tested by: Andre Heider (a.heider@gmail.com)
MFC after: 3 days
The creation time support breaks the data structures used in linux
fuse. libfuse carries it's own header.
Revert the changes for now. We will try to get an agreement with the
fuse upstream maintainers to avoid having to patch the library
headers all the time.
instruction set. Thumb-2 requires an if-then instruction to implement
conditional codes.
When building for ARM mode the it-then instructions do not generate any
assembled instruction as per the ARMv7-A Architecture Reference Manual, and
are safe to use.
While this allows the atomic instructions to be built, it doesn't mean we
fully support Thumb code. It works in small tests, but is still known to
fail in a large number of places.
While here add a check for the armv6t2 architecture.
new 1Gb server controller chip that will be going into production
soon.
BCM5725 combines MAC with triple-speed PHY, a Network Controller
Sideband Interface (NC-SI) and on-chip memory buffer in a single
device. BCM5725 has an Application Processing Engine (APE) that is
capable of on-chip management and offloading features. BCM5725
supports high-precision clock, time stamp registers for
receive/transmit packets and programmable trigger inputs and
watchdog timeouts. These new features are not yet supported by
bge(4).
Many thanks to Broadcom for continuing to support FreeBSD!
Submitted by: Geans Pin geanspin@Broacom (initial version)
Reviewed by: Geans Pin geanspin@Broacom
H/W donated by: Broadcom
Recalculate FUSE_COMPAT_ENTRY_OUT_SIZE and COMPAT_ATTR_OUT_SIZE.
These were wrong in the previous commit. They are actually unused
in FreeBSD though.
Pointed out by: Jan Beich
When birthtime was added (r253331) we missed adding the weight
of the new fields in FUSE_COMPAT_ENTRY_OUT_SIZE and
COMPAT_ATTR_OUT_SIZE. Adjust them accordingly.
Pointed out by: Jan Beich
As part of this commit, add an nvme_strvis() function which borrows
heavily from cam_strvis(). This will allow stripping of
leading/trailing whitespace and also handle unprintable characters
in model/serial numbers. This function goes into a new nvme_util.c
file which is used by both the driver and nvmecontrol.
Sponsored by: Intel
Reviewed by: carl
MFC after: 3 days
Recent testing with QEMU that has variable sector size support for
NVMe uncovered some of these issues. Chatham prototype boards supported
only 512 byte sectors.
Sponsored by: Intel
Reviewed by: carl
MFC after: 3 days
- Add a new address space allocation method (VMFS_OPTIMAL_SPACE) for
vm_map_find() that will try to alter the alignment of a mapping to match
any existing superpage mappings of the object being mapped. If no
suitable address range is found with the necessary alignment,
vm_map_find() will fall back to using the simple first-fit strategy
(VMFS_ANY_SPACE).
- Change mmap() without MAP_FIXED, shmat(), and the GEM mapping ioctl to
use VMFS_OPTIMAL_SPACE instead of VMFS_ANY_SPACE.
Reviewed by: alc (earlier version)
MFC after: 2 weeks
beasts still exist unfortunately. More details can be found in other
references, but the short version is that bridges with this bit set ignore
I/O port ranges that alias to valid ISA I/O port ranges. In the driver
this requires not allocating these alias regions from the parent device
(so they are free to be acquired by ISA devices), and ensuring no child
devices use resources from these alias regions.
- Change the pcib_window structure to allow for an array of backing
resources rather than a single resource and update the existing code
to cope with this. Some of the coping requires using the saved
base and limit values in pcib_window instead of using rman operations
on the backing resource.
- Add special handling for allocating and adjusting the I/O port window
of an ISA-enabled bridge to only allocate the non-alias ranges and
add those to the associated resource manager.
- Reject I/O port allocations for a fixed request that conflicts with an
ISA alias range.
- Remove the "no prefected decode" verbose printf during boot. The absence
of a "prefetched decode" line is sufficient.
- Replace the "subtractively decoded bridge" verbose printf with a single
printf that lists all the "special" decoding modes of a bridge: ISA,
subtractive, and VGA.
- Add a custom bus_release_resource() method to the PCI bus driver so that
it can properly free resources for I/O windows of PCI-PCI bridges.
(These resources are not stored in the bridge device's resource list.)
PR: misc/179033
MFC after: 2 weeks
generic and apply to all sysfs attributes:
- Use sysctl_handle_string() instead of reimplementing it.
- Remove trailing newline from the current value before passing it to
userland and append a newline to the new string value before passing it
to the attribute's store function.
- Don't leak the temporary buffer if the first error check triggers.
- Revert earlier change to mlx4 port mode handler.
PR: kern/174213
Submitted by: Garrett Cooper
Reviewed by: Shakar Klein @ Mellanox
MFC after: 1 week
commands during controller initialization.
DELAY() does not work here during config_intrhook context - we need to
explicitly relinquish the CPU for the admin command completion to
get processed.
Sponsored by: Intel
Reported by: Adam Brooks <adam.j.brooks@intel.com>
Reviewed by: carl
MFC after: 3 days
and firmware revision in the controller's identify structure.
Also modify consumers of these fields to ensure they only use the
specified number of bytes for their respective fields.
Sponsored by: Intel
Reviewed by: carl
MFC after: 3 days
to Ethernet and the subsequent port being set to IB.
Submitted by: Shakar Klein @ Mellanox
Tested by: Morgan Robertson <morganrobertson@gmail.com>
MFC after: 1 week
The read DMA request logic operation is based on having sufficient
available space in the transmit data buffer (TXMBUF) before a read
DMA can be requested. There are four read DMA channels that use
the TXMBUF, and the logic checks if the available free space in the
TXMBUF is large enough for all the data in the four Send Buffers
for which buffer descriptors have been fetched. The Enable_Request
signal is asserted only if the free TXMBUF space is larger than the
sum of the four DMA length registers. The power-up default value
of BGE_RDMA_LSO_CRPTEN_CTRL register bit 25 (bit 21 on BCM5720) is
zero, which selects the DMA length registers to connect to the
input of the adder block. The DMA length registers are
asynchronously reset following BCM5719/BCM5720 power-up, and due to
the lack of synchronous deassertion of the length registers reset
signal these resisters may contain uninitialized values following
the reset deassertion.
In the case of the failure the uninitialized DMA length register
values added up to more than the TXMBUF size, which prevented the
assertion of the Enable_Request signal and any subsequent read DMA
to start. This lockup condition is the root cause of failing to
generate any transmit traffic.
To workaround the issue, select alternate output of multiplexers
and transmit the first four Ethernet frames. This overwrites the
DMA length registers with valid values.
Reported by: Geans Pin <geanspin@broadcom.com>
Reviewed by: Geans Pin <geanspin@broadcom.com>
constraint to 8. Previously it may have triggered watchdog
timeouts.
o Check whether interrupt is ours or not.
o Enable interrupts before attemping to transmit queued packets.
This will slightly improve TX performance.
o No need to clear IFF_DRV_OACTIVE in a loop. AE_FLAG_TXAVAIL is
used to know whether there are enough available TxD ring space.
o Added missing bus_dmamap_sync(9) in ae_rx_intr() and rearranged
code to avoid unncessary register access.
o Make sure to clear TxD, TxS, RxD rings in driver initialization.
Otherwise some data in these rings could be interpreted as
'updated' which in turn will advance internally maintained
pointers and can trigger watchdog timeouts.
PR: kern/180382
- We should check is_d32 to see howmany registers we have
- In vfp_restore mark vfpscr as an output register
Without the second part it appears we can return the incorrect value from
vfp_bounce if the VFP condition flags are set as it may override the
register holding the return value.
make the ARM EABI the default ABI on arm, armeb, armv6 and armv6eb.
This is intended to be the default ABI from now on with the old ABI to be
retired. Because of this all users are strongly suggested to upgrade to the
ARM EABI.
As the two ABIs are incompatible it is unlikely upgrading in place will
work. Users should perform a full backup and either use an external machine
to upgrade, or install to an alternative location on their media. They
should also reinstall all ports or packages when these are available.
The only known issues are:
- pkg incorrectly detects the ABI. This is fixed upstream, and will a
patch will be made to the port.
- GDB can have issues with executables built with clang.
__FreeBSD_version has been bumped.
settings for ACPI-enumerated serial ports by forcing any IRQs that use
an ISA IRQ value with these settings to active-high instead of active-low.
This is known to occur with the BIOS on an Intel D2500CCE motherboard.
Tested by: Robert Ames <robertames@hotmail.com>, lev
Submitted by: Juergen Weiss weiss at uni-mainz.de (original patch)
Now that r253351 moved sendfile() stats to a separate struct, the
last field used in mbstat is m_mcfail, which is updated, but never
read or obtained from userland.
