from the tsc.
- Set skipnext = 1 for yielding and preempted events so we don't show the
event that adds us back to the run queue. It used to be 2 so we would
skip the ksegrp run queue addition and the system run queue addition
but the ksegrp run queue has gone away.
- Don't display down to nanosecond resolution for scheduling events right
now. This can sometimes cause a division by zero.
o remove errata_a0 and introduce the corresponding flags into 'errata'.
o introduce a new errata for K8, namely some platform might set the
PENDING_BIT but aren't able to unset it, also don't loop forever
waiting PENDING_BIT being cleared.
o try to introduce a workaround for the PENDING_BIT stuck problem,
o support now half multipliers for K8.
Tested by: Abdullah Al-Marrie
Approved by: njl
file are after snaplock, while other ffs device buffers are before
snaplock in global lock order. By itself, this could cause deadlock
when bdwrite() tries to flush dirty buffers on snapshotted ffs. If,
during the flush, COW activity for snapshot needs to allocate block
and ffs_alloccg() selects the cylinder group that is being written
by bdwrite(), then kernel would panic due to recursive buffer lock
acquision.
Avoid dealing with buffers in bdwrite() that are from other side of
snaplock divisor in the lock order then the buffer being written. Add
new BOP, bop_bdwrite(), to do dirty buffer flushing for same vnode in
the bdwrite(). Default implementation, bufbdflush(), refactors the code
from bdwrite(). For ffs device buffers, specialized implementation is
used.
Reviewed by: tegge, jeff, Russell Cattelan (cattelan xfs org, xfs changes)
Tested by: Peter Holm
X-MFC after: 3 weeks (if ever: it changes ABI)
- Define our own maybe_preempt() as sched_preempt(). We want to be able
to preempt idlethread in all cases.
- Define our idlethread to require preemption to exit.
- Get the cpu estimation tick from sched_tick() so we don't have to worry
about errors from a sampling interval that differs from the time
domain. This was the source of sched_priority prints/panics and
inaccurate pctcpu display in top.
for clock.h, so changing th i386 clock.h broke it. MFi386 (not tested):
Cleaned up declaration and initialization of clock_lock. It is only
used by clock code, so don't export it to the world for machdep.c to
initialize. There is a minor problem initializing it before it is
used, since although clock initialization is split up so that parts
of it can be done early, the first part was never done early enough
to actually work. Split it up a bit more and do the first part as
late as possible to document the necessary order. The functions that
implement the split are still bogusly exported.
Cleaned up initialization of the i8254 clock hardware using the new
split. Actually initialize it early enough, and don't work around it
not being initialized in DELAY() when DELAY() is called early for
initialization of some console drivers.
This unfortunately moves a little more code before the early debugger
breakpoint so that it is harder to debug. The ordering of console and
related initialization is delicate because we want to do as little as
possible before the breakpoint, but must initialize a console.
setrunqueue() was mostly empty. The few asserts and thread state
setting were moved to the individual schedulers. sched_add() was
chosen to displace it for naming consistency reasons.
- Remove adjustrunqueue, it was 4 lines of code that was ifdef'd to be
different on all three schedulers where it was only called in one place
each.
- Remove the long ifdef'd out remrunqueue code.
- Remove the now redundant ts_state. Inspect the thread state directly.
- Don't set TSF_* flags from kern_switch.c, we were only doing this to
support a feature in one scheduler.
- Change sched_choose() to return a thread rather than a td_sched. Also,
rely on the schedulers to return the idlethread. This simplifies the
logic in choosethread(). Aside from the run queue links kern_switch.c
mostly does not care about the contents of td_sched.
Discussed with: julian
- Move the idle thread loop into the per scheduler area. ULE wants to
do something different from the other schedulers.
Suggested by: jhb
Tested on: x86/amd64 sched_{4BSD, ULE, CORE}.
used by clock code, so don't export it to the world for machdep.c to
initialize. There is a minor problem initializing it before it is
used, since although clock initialization is split up so that parts
of it can be done early, the first part was never done early enough
to actually work. Split it up a bit more and do the first part as
late as possible to document the necessary order. The functions that
implement the split are still bogusly exported.
Cleaned up initialization of the i8254 clock hardware using the new
split. Actually initialize it early enough, and don't work around it
not being initialized in DELAY() when DELAY() is called early for
initialization of some console drivers.
This unfortunately moves a little more code before the early debugger
breakpoint so that it is harder to debug. The ordering of console and
related initialization is delicate because we want to do as little as
possible before the breakpoint, but must initialize a console.
If argv[0] == "mount_nfs4", then default to mounting NFSv4,
otherwise if argv[0] == "mount_nfs", default to the old mount_nfs behavior.
- Add a -4 option.
- Add the University of Michigan copyright from mount_nfs4.c, for the
code merged from mount_nfs4.c.
Reviewed by: rees
the mount options list with vfs_deleteopt(). At this point, the export
information is saved in mp->mnt_export, so we can delete
the "export" mount option from mp->mnt_optnew and mp->mnt_opt.
This fixes read-write/read-only update mounts (mount -u -o rw, mount -u -o ro)
of NFS exported directories.
For some reason, I could only reproduce the problem with a configuration
supplied by Andre:
- "options QUOTA" enabled in kernel config
- "/ -maproot=root 10.0.1.105" in /etc/exports
Reported by: kris, Andre Guibert de Bruet <andy siliconlandmark com>,
Andrzej Tobola <ato iem pw edu pl>
Tested by: Andre Guibert de Bruet
addresses shall access invalid descriptor DMA addresses on PCIe
hardwares and then panicked the system.
To fix it set descriptor DMA addresses before enabling Tx and Rx
such that hardware can see valid descriptor DMA addresses. Also
set RL_EARLY_TX_THRESH before starting Tx and Rx.
Reported by: steve.tell AT crashmail DOT de
Tested by: steve.tell AT crashmail DOT de
Obtained from: NetBSD
MFC after: 1 week
- First off, device drivers really do need to know if they are allocating
MSI or MSI-X messages. MSI requires allocating powerof2() messages for
example where MSI-X does not. To address this, split out the MSI-X
support from pci_msi_count() and pci_alloc_msi() into new driver-visible
functions pci_msix_count() and pci_alloc_msix(). As a result,
pci_msi_count() now just returns a count of the max supported MSI
messages for the device, and pci_alloc_msi() only tries to allocate MSI
messages. To get a count of the max supported MSI-X messages, use
pci_msix_count(). To allocate MSI-X messages, use pci_alloc_msix().
pci_release_msi() still handles both MSI and MSI-X messages, however.
As a result of this change, drivers using the existing API will only
use MSI messages and will no longer try to use MSI-X messages.
- Because MSI-X allows for each message to have its own data and address
values (and thus does not require all of the messages to have their
MD vectors allocated as a group), some devices allow for "sparse" use
of MSI-X message slots. For example, if a device supports 8 messages
but the OS is only able to allocate 2 messages, the device may make the
best use of 2 IRQs if it enables the messages at slots 1 and 4 rather
than default of using the first N slots (or indicies) at 1 and 2. To
support this, add a new pci_remap_msix() function that a driver may call
after a successful pci_alloc_msix() (but before allocating any of the
SYS_RES_IRQ resources) to allow the allocated IRQ resources to be
assigned to different message indices. For example, from the earlier
example, after pci_alloc_msix() returned a value of 2, the driver would
call pci_remap_msix() passing in array of integers { 1, 4 } as the
new message indices to use. The rid's for the SYS_RES_IRQ resources
will always match the message indices. Thus, after the call to
pci_remap_msix() the driver would be able to access the first message
in slot 1 at SYS_RES_IRQ rid 1, and the second message at slot 4 at
SYS_RES_IRQ rid 4. Note that the message slots/indices are 1-based
rather than 0-based so that they will always correspond to the rid
values (SYS_RES_IRQ rid 0 is reserved for the legacy INTx interrupt).
To support this API, a new PCIB_REMAP_MSIX() method was added to the
pcib interface to change the message index for a single IRQ.
Tested by: scottl
control data but no payload data is passed.
Change m_uiotombuf() to return at least one empty mbuf if the requested
length was zero. Add comment to sosend_dgram and sosend_generic().
Diagnoses by: jhb
Regression test by: rwatson
Pointy hat to. andre
Point out that FreeBSD libc has compat stubs for GNU glibc NSS
modules which access NSDB_PASSWD/NSDB_GROUP, but not NSDB_HOSTS;
based on painful experience porting nss_mdns.
Reviewed by: ru
--------------------------
[Deadlock] is caused by a lock order reversal in vfs_lookup(), where
[some] process is trying to lock a directory vnode, that is the parent
directory of covered vnode) while holding an exclusive vnode lock on
covering vnode.
A simplified scenario:
root fs var fs
/ A / (/var) D
/var B /log (/var/log) E
vfs lock C vfs lock F
Within each file system, the lock order is clear: C->A->B and F->D->E
When traversing across mounts, the system can choose between two lock orders,
but everything must then follow that lock order:
L1: C->A->B
|
+->F->D->E
L2: F->D->E
|
+->C->A->B
The lookup() process for namei("/var") mixes those two lock orders:
VOP_LOOKUP() obtains B while A is held
vfs_busy() obtains a shared lock on F while A and B are held (follows L1,
violates L2)
vput() releases lock on B
VOP_UNLOCK() releases lock on A
VFS_ROOT() obtains lock on D while shared lock on F is held
vfs_unbusy() releases shared lock on F
vn_lock() obtains lock on A while D is held (violates L1, follows L2)
dounmount() follows L1 (B is locked while F is drained).
Without unmount activity, vfs_busy() will always succeed without blocking
and the deadlock isn't triggered (the system behaves as if L2 is followed).
With unmount, you can get 4 processes in a deadlock:
p1: holds D, want A (in lookup())
p2: holds shared lock on F, want D (in VFS_ROOT())
p3: holds B, want drain lock on F (in dounmount())
p4: holds A, want B (in VOP_LOOKUP())
You can have more than one instance of p2.
The reversal was introduced in revision 1.81 of src/sys/kern/vfs_lookup.c and
MFCed to revision 1.80.2.1, probably to avoid a cascade of vnode locks when nfs
servers are dead (VFS_ROOT() just hangs) spreading to the root fs root vnode.
- Tor Egge
To fix the LOR, ups@ noted that when crossing the mount point, ni_dvp
is actually not used by the callers of namei. Thus, placeholder deadfs
vnode vp_crossmp is introduced that is filled into ni_dvp.
Idea by: ups
Reviewed by: tegge, ups, jeff, rwatson (mac interaction)
Tested by: Peter Holm
MFC after: 2 weeks
sparc64 GENERIC and the sound device drivers known working on sparc64
to use bus_get_dma_tag() to obtain the parent DMA tag so we can get rid
of the sparc64_root_dma_tag kludge eventually. Except for ath(4), sk(4),
stge(4) and ti(4) these changes are runtime tested (unless I booted up
the wrong kernels again...).
a power saving mode otherwise.
- If the thread is already bound in sched_bind() unbind it before
re-binding it to a new cpu. I don't like these semantics but they are
expected by some code in the tree. Patch by jkoshy.
Dont expose em->shared to the outside world before its properly
initialized. Might not affect anything but its at least a better
coding style.
Dont expose em via p->p_emuldata until its properly initialized.
This also enables us to get rid of some locking and simplify the
code because we are workin on a local copy.
In linux_fork and linux_vfork create the process in stopped state
to be sure that the new process runs with fully initialized emuldata
structure [1]. Also fix the vfork (both in linux_clone and linux_vfork)
race that could result in never woken up process [2].
Reported by: Scot Hetzel [1]
Suggested by: jhb [2]
Reviewed by: jhb (at least some important parts)
Submitted by: rdivacky
Tested by: Scot Hetzel (on amd64)
Change 2 comments (in the new code) to comply to style(9).
Suggested by: jhb
work when we start requiring this.
- Don't specify an alignment when creating our own parent DMA tag;
the supported DMA engines require no alignment constraint (f.e. the
LANCE child does though) and it's no inherited by the child DMA
tags anyway (which probably is a bug though).
- Fix whitespace nits.
and add a list of known-working PCI devices.
- For consistency throughout this man page also talk about C-Bus and
ISA adapters rather than cards.
- Add missing .Tn.
- Mention ifconfig(8) along with listing selectable media types.
- Add/un-comment hardware notes for the newly supported 'lebuffer'
variants (the transition from P/N 501-1860 to 501-1869 isn't a typo).
These are shared-memory variants based on Am79C90-compatible chips
that apart from the missing DMA engine are similar to the 'ledma'
variant including using a (pseudo-)bus/device for the buffer that
the actual LANCE device hangs off from. The performance of these is
close to that of the 'ledma' one, like expected at a few times the
CPU load though.
1) Do not account for uids/gids that appear negative to prevent
the creation of 131GB+ quota files. This is the same as the kernel
now determines which files to provide quota accounting for.
Related to PR kern/38156. This should also prevent boots from
hanging if a negative uid appears in the file systems.
2) Do not count system files in the usage counts. These currently are
file system snapshot and quota data files. This is how the kernel
now handles those files.
3) Correctly generate new quota data files if the current files
do not exist or are zero length in size. PR kern/30958.
It should now be possible to newfs / mount / touch quota.{user,group}
and quotaon a file system and have everything work.
4) Change some diagnostics to report the file system and type of
id (uid or gid) that is being reported.
5) Truncate the quota data files if possible, instead of letting
them grow to a big enough size to hold the largest UID/GID on
the system (typically "nobody"). The kernel should now be able to
grow the files as needed without deadlocking the system.
PR: kern/30958, kern/38156
1) Do not do quota accounting for the actual quota data files
or for file system snapshot files ("system" files). This
prevents a deadlock descibed in PR kern/30958 if the kernel
ever has to grow the quota file. Snapshot files were already
exempt from the quota checks, but this change generalized the check.
2) Fix a cast that caused extremely large uids/gids to incorrectly
write the quota information to the data file at a truncated
value for a uint_t32 id value. The incorrect cast caused quota
files in this case to be around 4GB in size, with the correct cast
they can now be 131GB in size. Also related to PR kern/30958.
3) Check for what appear to be negative UIDs/GIDs and not account
for them. This prevents the quota files from becoming 131GB in
size and causing quotacheck to run forever at bootup. This could
also cause the kernel to try and expand the quota file, which might
deadlock due to the issue in #1. kern/30958 and kern/38156
(and some much older closed PR's).
4) With the deadlock problems gone, the kernel can now expand the
size of the quota database files if it needs to.
5) Pass in the i-node count change value to chkiq and chkiqchg as an
int, like it used to be before the common routine was split up
into 2 different routines to increase / decrease the i-node in-use
count. Prevents an underflow on the i-node count. Related
to PR kern/89247.
6) Prevent the block usage from growing slowly if a file system is
full and the write was denied due to that fact. PR kern/89247.
Some of these changes require an updated quotacheck to prevent
the creation of huge (131GB) quota data files (item #3).
#1/#4 probably fixes a lot of the random hangs when quotas are enabled,
possibly some of the jail hangs.
