inevitable component in Sun Exx00 machines and provides serial ports,
NVRAM and TOD amongst others which are handled by uart(4) and eeprom(4)
respectively). This driver currently only prints out information about
the chassis on attach and allows to blink the 'Cycling' LED (which is
duplicated on the front panel) of the clock board just like fhc(4) does
for the other boards. The device name for the LED is /dev/led/clockboard.
Obtained from: OpenBSD
Tested by: joerg
bus_generic_rl_release_resource() for the bus_release_resource() method
instead of a local copy.
- Correctly handle pass-through allocations in fhc_alloc_resource().
- In case the board model can't be determined just print "unknown model"
so the physical slot number is reported in any case.
- Add support for blinking the 'Cycling' LED of boards on a fhc(4) hanging
of off the nexus (i.e. all boards except the clock board) via led(4).
All boards have at least 3 controllable status LEDs, 'Power', 'Failure'
and 'Cycling'. While the 'Cycling' LED is suitable for signaling from
the OS the others are better off being controlled by the firmware.
The device name for the 'Cycling' LED of each board is /dev/led/boardX
where X is the physical slot number of the board. [1]
Obtained from: OpenBSD [1]
Tested by: joerg [1]
bus_generic_rl_release_resource() for the bus_release_resource() method
instead of a local copy.
- Correctly handle pass-through allocations in central_alloc_resource().
Reduce the number of arguments passed between these functions by
creating a special-purpose struct.
Patch: 7.120,7.121
Submitted by: Max Okumoto <okumoto@ucsd.edu>
This is mentioned in the Handbook but it is not as obvious to new
users why bpf is needed compared to the other largely self-explanatory
items in GENERIC.
PR: conf/40855
MFC after: 1 week
would access memory before the beginning of the string to match (the
suffix match starts at the end of both the string and the suffix and
proceedes to the begin until either the start of the suffix is hit
or the character does not match). This could lead to a memcpy copying
into random memory. Fix this by checking the length of the string to
match too and replacing the Lst_Find calls with LST_FOREACH loops
(last part by me).
Submitted by: Matt Dillon <dillon@apollo.backplane.com> (in principle)
building the rescue binary. This fixes a problem with NO_TCSH, where
the "make obj" stage of buildworld doesn't recurse into bin/csh,
resulting in csh build-tools being put into /usr/src/bin/csh.
Pointed out by: dougb (on hackers@)
last in the list rather than first.
This makes the resouces print in the 4.x order rather than the 5.x order
(eg fdc0 at 0x3f0-0x3f5,0x3f7 is 4.x, but 0x3f7,0x3f0-0x3f5 is 5.x). This
also means that the pci code will once again print the resources in BAR
ascending order.
