This memset() wiped MPI2_FUNCTION_SCSI_TASK_MGMT set by mprsas_alloc_tm(),
that broke target reset on device removal, making later re-insertion into
the same slot impossible, since firmware was still waiting for the driver
to finish with the removed device.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Unlike lld, ld.bfd doesn't infer the emulation from the first object
file, but assumes its compiled in default for ld -r.
Differential Revision: https://reviews.freebsd.org/D25728
This compare two 32 bits times
Sponsored by: The FreeBSD Foundation
Reviewed by: kib, hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25700
This calls clear_bit and adds a memory barrier.
Sponsored by: The FreeBSD Foundation
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25943
The socket may be bound to an IPv4-mapped IPv6 address. However, the
inp address is not relevant to the JOIN_GROUP or LEAVE_GROUP operations.
While here remove an unnecessary check for inp == NULL.
Reported by: syzbot+d01ab3d5e6c1516a393c@syzkaller.appspotmail.com
Reviewed by: hselasky
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25888
Finish updating comments to reflect new locking protocols introduced
over the past year. In particular, vm_page_lock is now effectively
unused.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25868
We don't do anything with the _nesteds variant so just call mutex_lock_interruptible
Sponsoredby: The FreeBSD Foundation
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25944
Same as kref_put but in addition to calling the rel function it will
acquire the lock first.
Sponsored by: The FreeBSD Foundation
Reviewed by: hselasky, emaste
Differential Revision: https://reviews.freebsd.org/D25942
This file contain some defines for common sizes.
Sponsored-by: The FreeBSD Foundation
Reviewed by: hselasky, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25941
These functions were introduced before UMA started ensuring that freed
memory gets placed in domain-local caches. They no longer serve any
purpose since UMA now provides their functionality by default. Remove
them to simplyify the kernel memory allocator interfaces a bit.
Reviewed by: cem, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25937
In lib/Makefile, we document the dependency with SUBDIR_DEPEND
For buildworld orchestration, just prebuild libregex if GOOGLETEST is
enabled. googletest will get built in a later pass.
libregex is incomplete, but it's a bit less buggy than the in-base
libgnuregex and mostly OK.
While here, rename -DIWTH_GNU -> -DWITH_GNU_COMPAT; the option implies
that we're compatible with the GNU counterpart, not that we're including GNU
anything.
gtest tests want to use \w ([[:alnum:]]) at the very least, which was
causing them to fail after r363679.
Start linking against libregex so that this shorthand is implemented.
PR: 248452
The entire patch-set is not yet mature enough for commit, but this usable
subset is generally enough for googletest to be happy with and mostly map to
some existing concepts, so they're not as invasive.
The specific changes included here are:
- Branching in BREs with \|
- \w and \W for [[:alnum:]] and [^[:alnum:]] respectively
- \s and \S for [[:space:]] and [^[:space:]] respectively
- Additional quantifiers in BREs, \? and \+ (self-explanatory)
There's some #ifdef'd out work for allowing empty branches as a match-all.
This is a feature that's under assessment... future work will determine
how standard this behavior is and act accordingly.
The constant seems to exists on MacOS X >= 10.8.
Requested by: swills
Reviewed by: allanjude, kevans
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D25933
The tests compare the command output (including of error cases) with the
expected output and exit code.
Not all tests are executed, since some expect to have a known good bc and
dc binary installed and compare results of large amounts of generated data
being processed by both versions to test for regressions.
This version omits the printing of a copyright header in interactive mode
and the dc command now exits after execution of the commands passed via -e
or -f instead of switching to interactive mode. To pass further commands
via STDIN when dc has been invoked with -e or -f, add "-f -" to the
parameter list.
This version omits the printing of a copyright header in interactive mode
and the dc command now exits after execution of the commands passed via -e
or -f instead of switching to interactive mode. To pass further commands
via STDIN when dc has been invoked with -e or -f, add "-f -" to the
parameter list.
This version makes dc exit after processing all commands passed via -e or -f
instead of waiting for more input on STDIN (add "-f -" to the command line
to emulate the behavior of versionm 3.1.3 and earlier, if desired).
The version and copyright message are no longer printed for interactive
sessions as was the case with the prior implementation in the FreeBSD base
system.
Obtained from: https://git.yzena.com/gavin/bc
Linux glibc has a dummy lchmod that always fails and emitting a linker
warning when used. Don't fail the build due to that warning when
bootstrapping by setting LD_FATAL_WARNINGS=no.
Reviewed By: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D25930
We bootstrap this file to allow compiling FreeBSD on Linux systems since
some boostrap tools use setmode(). Unfortunately, glibc's sys/stat.h
declares a non-static getumask() function (which is unimplemented!) and
that conflicts with the local getumask() function. To work around this
simply use a different name here.
Reviewed By: brooks, emaste
Differential Revision: https://reviews.freebsd.org/D25929
GCC's cpp was exiting immediately when it failed to find requested
includes (<ncurses_cfg.h> and <ncurses_defs.h>). clang-cpp emitted an
error for the missing header files but continued processing the file
(thus not honoring any macros defined in the missing headers).
Arguably, the awk script is buggy since it doesn't check the return
value of the command it executes.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D25731
These exist on the Raspberry Pi 3 and 4 and control and external IO
expander.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25858
There are child nodes in the device tree, e.g. the Raspberry Pi firmware
GPIO device. Add support for this to be a bus so we can attach these
children.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25848
Reduce code duplication when a bus is subclassed from simplebus by allowing
them to call simplebus_attach directly. This is useful when the child bus
will just implement the same calls.
As not all children will expect to have a ranges property, e.g. the
Raspberry Pi firmware, allow this property to be missing.
Reviewed by: manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D25925
As we are moving away from portsnap,
let's not recommend it in the manual page.
Reviewed by: bcr (manpages), mat (portmgr)
Differential Revision: https://reviews.freebsd.org/D25847
RISC-V doesn't support floating-point exceptions.
RISC-V Instruction Set Manual: Volume I: User-Level ISA, 11.2 Floating-Point
Control and Status Register: "As allowed by the standard, we do not support
traps on floating-point exceptions in the base ISA, but instead require
explicit checks of the flags in software. We considered adding branches
controlled directly by the contents of the floating-point accrued exception
flags, but ultimately chose to omit these instructions to keep the ISA simple."
We still need these functions, because some applications (notably Perl) call
them, but we cannot provide a meaningful implementation.
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D25740
The newer hardware revisions of the Raspberry Pi 4 removed the ability of
the VIA VL805 xhci controller to load its own firmware. Instead the
firmware must be installed at the appropriate time by the VideoCore
coprocessor.
Submitted by: Robert Crowston <crowston_protonmail.com>
Differential Revision: https://reviews.freebsd.org/D25261
Currently the CONS_HISTORY and CONS_CLRHIST ioctls modify the state of the
active terminal instead of the terminal against which the ioctl was issued.
Because of the way vidcontrol(1) works, these are the same in most cases.
But a poorly-timed window switch can make them differ. This is reproducible
by issuing e.g. 'vidcontrol -s 2 && vidcontrol -C' to switch from vty 1 to
vty 2; teken will reset the cursor position on vty 1 but vt(4) will clear
the history buffer of vty 2, producing an interesting state of affairs.
Differential Revision: https://reviews.freebsd.org/D25564
