Replace conditional branches with trampolines to unconditional branches when
jumping to labels within other compilation units. This increases the offset
range from +-1 MiB to +-128 MiB.
The BSDL dtc has grown the needed features (overlays mostly) and is able to
compile all of our base DTS.
You can use WITH_GPL_DTC is you need the GPL one or DTC= in make.conf(5)
to specify an alternate location for the compiler to use.
Discussed with: emaste, imp
r320070 removed the definition of maxbcachebuf from sys/param.h to
fix the build for arm.
This patch adds the definition of maxbcachebuf to sys/buf.h, which
should be ok, since sys/buf.h is not being included in arm/arm/elf_note.S.
Suggested by: kib
MFC after: 2 weeks
Do not queue dmar_map_entries with zeroed gseq to
dmar_qi_invalidate_locked(). Zero gseq stops the processing in the qi
task. Do not assign possibly uninitialized on-stack gseq to map
entries when requeuing them on unit tlb_flush queue. Random garbage
in gsec is interpreted as too high invalidation sequence number and
again stop the processing in the task.
Make the sequence numbers generation completely contained in
dmar_qi_invalidate_locked() and dmar_qi_emit_wait_seq(). Upper code
directly passes boolean requesting emiting wait command instead of
trying to provide hint to avoid it by passing NULL gseq pointer.
Microoptimize the requeueing to tlb_flush queue by doing it for the
whole queue.
Diagnosed and tested by: Brett Gutstein <bgutstein@rice.edu>
Discussed with: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Most of the lock slowpaths assert that the calling thread isn't an idle
thread. However, this may not be true if the system has panicked, and in
some cases the assertion appears before a SCHEDULER_STOPPED() check.
MFC after: 3 days
Sponsored by: Dell EMC Isilon
If the user issues a MTIOCEXTGET ioctl, and the tape drive in question has
a serial number that is longer than 80 characters, we malloc a buffer in
saextget() to hold the output of cam_strvis().
Since a mutex is held in that codepath, doing a M_WAITOK malloc could lead
to sleeping while holding a mutex. Change it to a M_NOWAIT malloc and bail
out if we fail to allocate the memory. Devices with serial numbers longer
than 80 bytes are very rare (I don't recall seeing one), so this
should be a very unusual case to hit. But it is a bug that should be fixed.
sys/cam/scsi/scsi_sa.c:
In saextget(), if we need to malloc a buffer to hold the output of
cam_strvis(), don't wait for the memory. Fail and return an error
if we can't allocate the memory immediately.
PR: kern/220094
Submitted by: Jia-Ju Bai <baijiaju1990@163.com>
MFC after: 3 days
Sponsored by: Spectra Logic
Since buildenv exports SYSROOT all of these uses will now look in
WORLDTMP by default.
sys/boot/efi/loader/Makefile
A LIBSTAND hack is no longer required for buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
VM_MAP_WIRE_SYSTEM mode when wiring the newly grown stack.
System maps do not create auto-grown stack. Any stack we handled,
even for P_SYSTEM, must be for user address space. P_SYSTEM processes
with mapped user space is either init(8) or an aio worker attached to
other user process with aio buffer pointing into stack area. In either
case, VM_MAP_WIRE_USER mode should be used.
Noted and reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is to allow downstream Makefiles to know for sure they are building
against a sysroot rather than only depending on ${DESTDIR} or other
assumptions.
This also exports it into buildenv.
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
device nodes.
Otherwise, the current check of aio_offset == -1LL makes it possible
to pass negative file offsets down to the filesystems. This trips
assertions and is even unsafe for e.g. FFS which keeps metadata at
negative offsets.
Reported and tested by: pho
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D11266
Starting with DTS from Linux 4.11, the pins list, function, drive and pull
are no longer prefixed with "allwinner,".
Allow the pinctrl driver to handle both case.
The code still doesn't use d_off. That will come in a future commit.
The code also removes the checks for servers returning a fileno that
doesn't fit in 32bits, since that should work ok now.
Bump __FreeBSD_version since this patch changes the interface between
the NFS kernel modules.
Reviewed by: kib
use the armv6 busdma interface. This interface uses more memory than
the armv4 one, but bounces more data more often so may be more correct
than the armv4 one. It is intended for debugging purposes only at the
moment.
load and unload it all the time since the buffer never changes. In
addition, we were loading it with a hardware spin lock held, which
makes the sleepable lock in busdma (for the bounce pages) trigger a
witness warning, as well as ipend being called with it held by uart,
which made it impossible to unload.
These differences don't matter with the v4 busdma implementation, but
they do with the v6 implementation since the latter likes to bounce
transactions more, and will always do so for Atmel's driver.
It's more efficient as well as being more correct.
We can have support for reading ext4 "huge" files but we can't write
(anything) on ext4. and some filesystem. Formally enable the feature so
that we can mount such filesystems.
Submitted by: Fedor Uponov
Differential Revision: https://reviews.freebsd.org/D11209
that disk writes are more likely to be sequential. This change is
beneficial on both the solid state and mechanical disks that I've
tested. (A similar change in allocation policy was made by DragonFly
BSD in 2013 to speed up Poudriere with "stressful memory parameters".)
Increase the width of blst_meta_alloc()'s parameter "skip" and the local
variables whose values are derived from it to 64 bits. (This matches the
width of the field "skip" that is stored in the structure "blist" and
passed to blst_meta_alloc().)
Eliminate a pointless check for a NULL blist_t.
Simplify blst_meta_alloc()'s handling of the ALL-FREE case.
Address nearby style errors.
Reviewed by: kib, markj
MFC after: 5 weeks
Differential Revision: https://reviews.freebsd.org/D11247
timecounter instead of the GPT timer, freeing up the more flexible GPT
hardware for other uses. The EPIT driver is a standard (always in the
kernel) driver, and the existing GPT driver is now optional and included
only if you ask for device imx_gpt.
global timer was successful, since the implementation tries to read it.
Notably, if the platform has a variable-frequency global timer (because
of dynamic frequency scaling), it doesn't set up the global timer for use
as a system timecounter, and in that case it also can't use it for DELAY.
Such platforms use different timer hardware for both timecounter and DELAY.
list.h includes a number of FreeBSD headers as a workaround for the
LIST_HEAD name collision. To reduce pollution, avoid including list.h
in commonly used headers when it is not explicitly needed.
Reviewed by: hselasky
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11249
arm build.
In the arm build, elf_note.S includes sys/param.h and then does an
elf macro called ELFNOTE(). Although the compile error doesn't make
sense to me, I believe it just means that an "extern ..." can't exist
in param.h for this inclusion case.
I suspect adding #if !defined(LOCORE) might fix the build, but this
commit just takes the definition out.
I will ask freebsd-current@ what is the best was to deal with this
and do a subsequent commit after that.
Reported by: melounmichal@gmail.com
Clang 4.0 accepts the smc instruction with or without specifying
.arch_extension sec, but Clang 5.0 produces an error without it.
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Add a make.conf DTC variable that control which DTC (Device Tree Compiler)
to use.
Reviewed by: bdrewery, imp
Differential Revision: https://reviews.freebsd.org/D9577
By making MAXBCACHEBUF a tunable, it can be increased to allow for
larger read/write data sizes for the NFS client.
The tunable is limited to MAXPHYS, which is currently 128K.
Making MAXPHYS a tunable or increasing its value is being discussed,
since it would be nice to support a read/write data size of 1Mbyte
for the NFS client when mounting the AmazonEFS file service.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D10991
This fixes these cases which would rebuild every time:
make[6]: /usr/obj/usr/src/libexec/rtld-elf/tests/libpythagoras/.depend, 1: ignoring stale .depend for /usr/obj/usr/src/tmp/usr/tests/libexec/rtld-elf/libm.a
make[6]: /usr/obj/usr/src/lib/libxo/tests/encoder/.depend, 1: ignoring stale .depend for /usr/obj/usr/src/tmp/usr/tests/lib/libxo/libxo.a
make[7]: /usr/obj/usr/src/lib/libthr/tests/dlopen/dso/.depend, 1: ignoring stale .depend for /usr/obj/usr/src/tmp/usr/tests/lib/libthr/dlopen/libpthread.a
The problem is that some Makefiles will override LIBDIR to where they want
their library to install. bsd.libnames.mk will then use ${LIBDIR} to define
where *existing* libraries are. This then leads to looking for the
libraries in the *target* place rather than the *expected* place.
We may want to expand this (and all of the other *DIR variables in bsd.own.mk)
into something like what Ports has, a PREFIX and a LOCALBASE. PREFIX being
where things are being installed to and LOCALBASE being where they already are.
For now store the default expected LIBDIR into LIBDIR_BASE and use that for
library locations.
Reported by: sbruno
MFC after: 1 week
Sponsored by: Dell EMC Isilon
This generates startup LORs and panics when adding elements to bridge
devices. I will document further in https://reviews.freebsd.org/D10681
PR: 220073
Submitted by: dchagin
Reported by: db
This syscall has never existed and is not at risk of existing any time soon.
Remove documentation referencing it, which has been wrong since FreeBSD 9.
Reported by: allanjude@
The arm kernel linker scripts place the .init_pagetable section in .bss,
but .init_pagetable had no section flags set, and so did not match the
expected flags for .bss.
GNU ld silently ignores this case, but lld reports an error:
ld: error: incompatible section flags for .bss
>>> locore.o:(.init_pagetable): 0x0
>>> output section .bss: 0x3
PR: 220055
Submitted by: mmel, Rafael Espíndola
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
for the rtl8188eu chipset
- Rename struct r92c_rom member names: s/channel_plan/reserved5/,
s/xtal_calib/channel_plan to be compliant with definitions of the efuse
in vendor hal_pg.h
Make syslog(3) resilent to cancellation occuring in supported deferred
mode. Code must unlock syslog_mutex on cancel, install the cleanup
handler.
Diagnosed and tested by: eugen
Discussed with: dchagin
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
dirty. Assert that they are fully dirty rather than redundantly calling
vm_page_dirty() on them.
Reviewed by: kib, markj
MFC after: 1 week
X-MFC after: r319932
file. That logic has grown quite significantly now;
o add a special handling for the snapshot images. Those have some
extra headers at the end of the image and we don't need those
in the output image really.
MFC after: 6 weeks
