Update of common code to provide a query on the MAC_SPOOFING_TX and
CHANGE_MAC privileges instead of the deprecated MAC_SPOOFING privilege.
Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4436
other end till it reaches predetermined threshold which is 3 for us right now.
Once that happens, we trigger fast-retransmit to do loss recovery.
Main problem with the current implementation is that we don't honor SACK
information well to detect whether an incoming ack is a dupack or not. RFC6675
has latest recommendations for that. According to it, dupack is a segment that
arrives carrying a SACK block that identifies previously unknown information
between snd_una and snd_max even if it carries new data, changes the advertised
window, or moves the cumulative acknowledgment point.
With the prevalence of Selective ACK (SACK) these days, improper handling can
lead to delayed loss recovery.
With the fix, new behavior looks like following:
0) th_ack < snd_una --> ignore
Old acks are ignored.
1) th_ack == snd_una, !sack_changed --> ignore
Acks with SACK enabled but without any new SACK info in them are ignored.
2) th_ack == snd_una, window == old_window --> increment
Increment on a good dupack.
3) th_ack == snd_una, window != old_window, sack_changed --> increment
When SACK enabled, it's okay to have advertized window changed if the ack has
new SACK info.
4) th_ack > snd_una --> reset to 0
Reset to 0 when left edge moves.
5) th_ack > snd_una, sack_changed --> increment
Increment if left edge moves but there is new SACK info.
Here, sack_changed is the indicator that incoming ack has previously unknown
SACK info in it.
Note: This fix is not fully compliant to RFC6675. That may require a few
changes to current implementation in order to keep per-sackhole dupack counter
and change to the way we mark/handle sack holes.
PR: 203663
Reviewed by: jtl
MFC after: 3 weeks
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D4225
Older ccache don't work with an empty CCACHE_PATH value. They will error with:
ccache: FATAL: Could not find compiler "cc" in PATH
make: "/mnt/bdrewery/git/onefs/src/share/mk/bsd.compiler.mk" line 134: Unable to determine compiler type for /usr/local/bin/ccache cc. Consider setting COMPILER_TYPE.
Sponsored by: EMC / Isilon Storage Division
The requirement is for a GCC-compatible compiler and not necessarily
GCC itself. However, we currently expect any compiler used for building
the whole of FreeBSD to be GCC-compatible and many things will break if
not; there's no longer a need to have an explicit test for this in csu.
Sponsored by: The FreeBSD Foundation
STAGE_OBJTOP and STAGE_HOST_OBJTOP.
These will always be overridden in sub-makes when building in-tree, but
are exported for the benefit of hooking in external builds, such as
ports.
Sponsored by: EMC / Isilon Storage Division
- Don't bother looking up REVISION/BRANCH/etc from release/, or the
CPUTYPE check, as these are not used for makeman and wastes time. The also
invokes auto.obj.mk after I reverted auto.obj.mk ignoring -V in r291312.
- Don't modify CC or PATH when WITH_CCACHE_BUILD or WITH_META_MODE is enabled
as it leads to bsd.compiler.mk errors.
Sponsored by: EMC / Isilon Storage Division
r289315 required time_t and struct timespec to be defined before
including <resolv.h>. This broke the build of net-mgmt/sx, at least.
Include <sys/timespec.h> in resolv.h to fix this with minimal pollution.
Reported by: Raphael Kubo da Costa <rakuco>
MFC after: 3 days
Sponsored by: Dell Inc.
Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?". "what is the MTU?", "Give me the IPv4 source address to use",
etc..).
Instead of hand-rolling lookups, checking if rtentry is up, valid,
dealing with IPv6 mtu, finding "address" ifp (almost never done right),
provide easy-to-use API hiding all the complexity and returning the
needed info into small on-stack structure.
This change also helps hiding route subsystem internals (locking, direct
rtentry accesses).
Additionaly, using this API improves lookup performance since rtentry is not
locked.
(This is safe, since all the rtentry changes happens under both radix WLOCK
and rtentry WLOCK).
Sponsored by: Yandex LLC
The script that generates these makefiles was changed to modify LIBADD
rather than LDADD/DPADD, but the makefile itself was also changed in a
slightly different way.
r281257 added support for lazyload mode by allowing dtrace(1) to register
a DOF section on behalf of a traced process. This was implemented by
having libdtrace copy the DOF section into a heap-allocated buffer and
passing its address to the ioctl handler. However, DTrace uses the DOF
section address as a lookup key in certain cases, so the ioctl handler
should be given the target process' DOF section address instead. This
change modifies the ADDDOF handler to copy the DOF section in from the
target process, rather than from dtrace(1).
These helper functions can be used to read in or write a buffer from or to
an arbitrary process' address space. Without them, this can only be done
using proc_rwmem(), which requires the caller to fill out a uio. This is
onerous and results in code duplication; the new functions provide a simpler
interface which is sufficient for most existing callers of proc_rwmem().
This change also adds a manual page for proc_rwmem() and the new functions.
Reviewed by: jhb, kib
Differential Revision: https://reviews.freebsd.org/D4245
r259397 (it contained the CAM_EXTLUN_VALID bit) and I added the
same type name with a different set of values back in r291716.
The old ccb_xflags enumeration still exists in FreeBSD stable/10.
Shift all of the new values by one bit to avoid compatibility
issues when merged to stable/10.
MFC after: 3 days
Sponsored by: Spectra Logic
Latest update of locales introduced abbreviated month that follows the regionale
rules meaning that they can be of variable length instead of being arbitrary
truncated to top 3 characters.
To fix alignement, ls now computes the visible length of the abbreviated month,
pads the shorter month with spaces in order to make sure everything is properly
aligned
Reviewed by: ache, ed, jilles
Differential Revision: https://reviews.freebsd.org/D4239
When converting from binary to ELF, elfcopy creates symbols
_binary_<filename>_start_, _binary_<filename>_end, and
_binary_<filename>_size. For compatibility with GNU objcopy (and to
produce sensible symbol names) the extension must be stripped off.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4238
Debug data files are now built by default with 'make buildworld' and
installed with 'make installworld'. This facilitates debugging but
requires more disk space both during the build and for the installed
world. Debug files may be disabled by setting WITHOUT_DEBUG_FILES=yes
in src.conf(5).
Reviewed by: bdrewery, eadler, vangyzen
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4018
from 1500 to 1496 bytes. The MTU should remain at 1500, extending the
frame size as per IEEE 802.3. Adding IFCAP_VLAN_MTU to the
if_capabilities field in the smsc driver solves the problem. The
datasheet for the LAN9512 chip, section 3.2.3 states that the chip
supports the extended frame.
Submitted by: rpp@ci.com.au
MFC after: 1 week
PR: 205050
new headers x86/include x86_var.h and x86_smp.h.
Reviewed by: emaste, jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D4358
The pcb is saved at the top of the kernel stack on x86 platforms.
The initial kenrel stack pointer is set in the TSS so that the trapframe
from user -> kernel transitions begins directly below the pcb and grows
down.
The XSAVE changes moved the FPU save area out of the pcb and into a
variable-sized area after the pcb. This required updating the expressions
to calculate the initial stack pointer from 'stacktop - sizeof(pcb)' to
'stacktop - sizeof(pcb) + FPU save area size'.
The i386_set_ioperm() system call allows user applications to access
individual I/O ports via the I/O port permission bitmap in the TSS.
On FreeBSD this requires allocating a custom per-process TSS instead of
using the shared per-CPU TSS.
The expression to initialize the initial kernel stack pointer in the
per-process TSS created for i386_set_ioperm() was not properly updated
after the XSAVE changes. Processes that used i386_set_ioperm() would
trash the trapframe during subsequent context switches resulting in
panics from memory corruption.
This changes fixes the kernel stack pointer calculation for the per-process
TSS.
Reviewed by: kib, n_hibma
Reported by: n_hibma
MFC after: 1 week
