should respond with all zeroes to any access to slave registers. Test with
PATA devices confirmed such behavior. Unluckily, Intel SATA controllers in
legacy emulation mode behave differently, not making any difference between
ATA and ATAPI devices. It causes false positive slave device detection and,
as result, command timeouts.
To workaround this problem, mask result of legacy-emulated soft-reset with
the device presence information received from the SATA-specific registers.
nm_maxfilesize. This value rarely, if ever, changes
and the nm_mtx mutex is locked/unlocked earlier in
the function, which should be sufficient to avoid
getting a stale cached value for it. There is a
discussion w.r.t. what these tests should be, but
I've left them basically the same as the regular
NFS client for now.
Suggested by: pjd
MFC after: 2 weeks
- TCO_MESSAGEx: TCO specific regs providing the ability to monitor BIOS
bootup activity.
- TCO_NEWCENTURY: reporting RTC year roll over.
- TCO_NMI2SMI_EN, TCO_NMI_NOW: controlling SMIs conversion to NMIs and
NMI trigger.
- SMI_GBL_EN: Enabling SMI delivery for all the northbridge controller.
MFC after: 10 days
allocate all of them at attach time. This allows to avoid moving
keys around in the most-recently-used queue and needs no mutex
synchronization nor refcounting.
MFC after: 2 weeks
create reasonably large cache for the keys that is filled when
needed. The previous version was problematic for very large providers
(hundreds of terabytes or serval petabytes). Every terabyte of data
needs around 256kB for keys. Make the default cache limit big enough
to fit all the keys needed for 4TB providers, which will eat at most
1MB of memory.
MFC after: 2 weeks
This improves hard-reset and hot-plug on these ports.
- Device with ID 0x29218086 is a 2-port variant of ICH9 in legacy mode.
Skip probing for nonexistent slave devices there.
It allows to avoid false positive device detection under Xen, that caused
long probe delays due to subsequent IDENTIFY command timeouts.
MFC after: 1 month
This is destined to be a lightweight and optional set of ALQ
probes for debugging events which are just impossible to debug
with printf/log (eg packet TX/RX handling; AMPDU handling.)
The probes and operations themselves will appear in subsequent
commits.
so that it won't try and use vp->v_mount to do an RPC during
a forced dismount. There needs to be at least one more kernel
commit, plus a change to the umount(8) command before forced
dismounts will work for the experimental NFS client.
MFC after: 2 weeks
that could have allowed the hardware pidx to reach the cidx even though
the freelist isn't empty. (Haven't actually seen this but it was there
waiting to happen..)
MFC after: 1 week
While in_pseudo() etc. is often used in offloading feature support,
in_cksum() is mostly used to fix some broken hardware.
Keeping both around for the moment allows us to compile NIC drivers
even in an IPv6 only environment without the need to mangle them
with #ifdef INETs in a way they are not prepared for. This will
leave some dead code paths that will not be exercised for IPv6.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 3 days
Not compiling in and not initializing from inetsw from in_proto.c for
IPv6 only, we need to initialize upper layer protocols from inet6sw.
Make sure to not initialize them twice in a Dual-Stack
environment but only conditionally on no INET as we have done for
TCP for a long time. Otherwise we would leak resources.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 3 days
When compiling out INET we still need the initialization routines
as well as the tuning and montoring sysctls shared with IPv6.
Move the two send/recvspace variables up from the middle of the
file to ease compiling out the INET only code.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 3 days
Move the ipport_tick_callout and related functions from ip_input.c
to in_pcb.c. The random source port allocation code has been merged
and is now local to in_pcb.c only.
Use a SYSINIT to get the callout started and no longer depend on
initialization from the inet code, which would not work in an IPv6
only setup.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 4 days
Move fw_one_pass to where it belongs: it is a property of ipfw,
not of ip_input.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC after: 3 days
experimental NFS client to take care of overflows for the calls
above the buffer cache layer in a manner similar to r220876.
Thanks go to dillon at apollo.backplane.com for providing the
snippet of code that does this.
MFC after: 2 weeks
experimental NFS client to take care of overflows. Thanks
go to dillon at apollo.backplane.com for providing the
snippet of code that does this.
MFC after: 2 weeks
now a suitable base for all kinds of egress queues.
- Add control queues (sge_ctrlq) and allocate one of these per hardware
channel. They can be used to program filters and steer traffic (and
more).
MFC after: 1 week
- If a ENH_SENS TLV section exit the firmware is capable of doing
enhanced sensitivity calibration.
- Newer devices/firmwares have more calibration commands therefore
hardcoding the noise gain/reset commands no longer works. It is
supposed to use the next index after the newest calibration type
support. Read the command index of the TLV section if available.
This support has not worked for several years, and is not likely to work
again, unless Intel decides to release a native FreeBSD version of their
compiler. ;)
calculate required memory size dynamically.
- Fix races on chain re-lock.
- Introduce new field to ip_fw_chain - generation count. Now utilized
only in the NAT configuration, but can be utilized wider in ipfw.
- Get rid of NAT_BUF_LEN in ip_fw.h
PR: kern/143653
specified minimum and maximum. In case when specified default value
is out of bounds it does not work as expected and does not limit
variable. Check that default value is in range and limit it if needed.
Also bump max_hash_size value to 65536 to correspond with manual page.
PR: kern/152887
MFC after: 2 weeks
within the experimental NFS client. Mostly add mutex locking
and use the same rsize, wsize during the operation by keeping
a local copy of it. This is another change that brings it
closer to the regular NFS client.
MFC after: 2 weeks
adding the check to nfsrpc_close() isn't useful. Also,
the check in nfscl_getcl() must be more involved, since
it needs to check before and after the acquisition of
the refcnt on nfsc_lock, while the mutex that protects
the client state data is held.
Add pmap_invalidate_cache_pages() method on x86. It flushes the CPU
cache for the set of pages, which are not neccessary mapped. Since its
supposed use is to prepare the move of the pages ownership to a device
that does not snoop all CPU accesses to the main memory (read GPU in
GMCH), do not rely on CPU self-snoop feature.
amd64 implementation takes advantage of the direct map. On i386,
extract the helper pmap_flush_page() from pmap_page_set_memattr(), and
use it to make a temporary mapping of the flushed page.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
don't force a window update if the window would not actually grow due to
window scaling. Specifically, if the window scaling factor is larger than
2 * MSS, then after the local reader has drained 2 * MSS bytes from the
socket, a window update can end up advertising the same window. If this
happens, the supposed window update actually ends up being a duplicate ACK.
This can result in an excessive number of duplicate ACKs when using a
higher maximum socket buffer size.
Reviewed by: bz
MFC after: 1 month
vop_stdallocate() is filesystem agnostic and will run as slow as a
read/write loop in userspace; however, it serves to correctly
implement the functionality for filesystems that do not implement a
VOP_ALLOCATE.
Note that __FreeBSD_version was already bumped today to 900036 for any
ports which would like to use this function.
Also reserve space in the syscall table for posix_fadvise(2).
Reviewed by: -arch (previous version)
for a case that will probably never happen. It can only
happen if a server were to successfully lookup a file, but not
return attributes for that file. Although technically allowed
by the NFSv3 RFC, I doubt any server would ever do this.
However, if it did, the client would have not vput()'d the
new vnode when it needed to do so.
MFC after: 2 weeks
that would be needed if, in the future, nfscl_loadattrcache()
were to return an error. Currently nfscl_loadattrcache()
never returns an error, so these cases never currently happen.
MFC after: 2 weeks
experimental NFS client's vnode op functions to make
them compatible with the regular NFS client. I'll admit
I'm not sure that the mutex locks around the assignments
are needed, but the regular client has them, so I added them.
Also, add handling of the case of partial attributes in
setattr to be compatible with the regular client.
MFC after: 2 weeks
functions, so that threads don't get stuck in them during
a forced dismount. nfs_sync/VFS_SYNC() needs this, since it is
called by dounmount() before VFS_UNMOUNT(). The nfscl_nget()
case makes sure that a thread doing an VOP_OPEN() or
VOP_ADVLOCK() call doesn't get blocked before attempting
the RPC. Attempting RPCs don't block, since they all
fail once a forced dismount is in progress.
The third one at the beginning of nfsrpc_close()
is done so threads don't get blocked while doing VOP_INACTIVE()
as the vnodes are cleared out.
With these three changes plus a change to the umount(1)
command so that it doesn't do "sync()" for the forced case
seem to make forced dismounts work for the experimental NFS
client.
MFC after: 2 weeks
message that was generated when doing experimental NFS client
mounts. I put that message in because the krpc would hang with
the default size for mounts that used large rsize/wsize values.
Since the bug that caused these hangs was fixed by r213756,
I think the message is no longer needed.
MFC after: 2 weeks
While it does not provide any functionality for IPv6, it provides
the sysctl nodes for net.inet.* that a lot of functionality shared
between IPv4 and IPv6 depends on. We cannot change these anymore
without breaking a lot of management and tuning.
In case of IPv6 only, we compile out everything but the sysctl node
declarations.
Reviewed by: gnn
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
MFC After: 5 days
passing the cached proxydl reference (sockaddr_dl initialized or not) to
nd6_na_output(). nd6_na_output() will thus assume a proxy NA. Revert to
conditionally passing either &proxydl or NULL if no proxy case desired.
Tested by: ipv6gw and ref9-i386
Reported by: Pete French (petefrench ingresso.co.uk on stable)
Reported by: bz, simon on Y! cluster
Reported by: kib
PR: kern/151908
MFC after: 3 days
If various checks are omitted, the CMSG_NXTHDR macro expands to
(struct cmsghdr *)((char *)(cmsg) + \
_ALIGN(((struct cmsghdr *)(cmsg))->cmsg_len))
Although there is no alignment problem (assuming cmsg is properly aligned
and _ALIGN is correct), this violates -Wcast-align on strict-alignment
architectures. Therefore an intermediate cast to void * is appropriate here.
There is no workaround other than not using -Wcast-align.
MFC after: 2 weeks
The code provides information on how the signal was generated.
Formerly, the code was only logged for traps, much like only signal handlers
for traps received a meaningful si_code before FreeBSD 7.0.
In rare cases, no information is available and 0 is still logged.
MFC after: 1 week
same as the regular NFS client for NFSv3. The main one is making
use of a reserved port# the default. Also, set the retry limit
for TCP the same and fix the code so that it doesn't disable
readdirplus for NFSv4.
MFC after: 2 weeks
It's also marked inactive by the initvals, and enabled after
the baseband/PLL has been configured, but before the RF
registers have been programmed.
The origin and reason for this particular change is currently unknown.
Obtained from: Linux ath9k
- 6000 series devices need enhanced sensitivity calibration.
- 6000 series devices need a different setting for the shadow reg.
- set the IWN_FLAG_HAS_11N bit if the EEPROM says the device has 11n
support.
Obtained from: OpenBSD
Antenna diversity on the >= AR5416 is implemented differently than the
AR5212 and previous chips. So for now, and not to confuse things, just
disable it for now.
- read RSSI only for the active chains
- cast RSSI/NF to int8_t before passing it up to radiotap
- remove the htole64() for the timestamp
Obtained from: OpenBSD
- Mark getc() as inline, this has no effect on gcc but helps clang.
- Move getc() body before xgetc() so gcc does not emit a warning about
function having no body.
threads in the same manner as the regular NFS client after
r214026 was committed. This resolves the lors fixed by r214026
and its predecessors for the regular client.
Reviewed by: jhb
MFC after: 2 weeks
- there is a local variable for sc->fw_dma, use that instead
- OpenBSD uses 5*hz to wait for firmware to be loaded
- in case the firmware module contains invalid data, actually release it
- use ATA_SE_EXCHANGED (SError.DIAG.X) bit to detect hot-plug events when
power-management enabled and ATA_SE_PHY_CHANGED (SError.DIAG.N) can't be
trusted;
- on controllers supporting staggered spin-up (SS) put unused channels
into Listen state instead of Off. It should still save some power, but
allow plug-in events to be detected;
- on controllers supporting cold presence detection (CPD), when power
management enabled, use CPD events to detect hot-plug in addition to PHY
events.
down. The ingress queue lock was unused and has been removed as part of
these changes.
- An in-flight egress update from the SGE must be handled before the
queue that requested it is destroyed. Wait for the update to arrive.
- Interrupt handlers must stop processing rx events for a queue before
the queue is destroyed. Events that have not yet been processed
should be ignored once the queue disappears.
MFC after: 1 week
to determine if a file system supports NFSv4 ACLs. Since
VOP_PATHCONF() must be called with a locked vnode, the function
is called before nfsvno_fillattr() and the result is passed in
as an extra argument.
MFC after: 2 weeks
crossing of server mount points properly. The functions
nfsvno_fillattr() and nfsv4_fillattr() were modified to
take the extra arguments that are the mount point, a flag
to indicate that it is a file system root and the mounted
on fileno. The mount point argument needs to be busy when
nfsvno_fillattr() is called, since the vp argument is not
locked.
Reviewed by: kib
MFC after: 2 weeks
invariant and APERF/MPERF MSRs exist but these MSRs never tick. When we
calculate effective frequency from cpu_est_clockrate(), it caused panic of
division-by-zero. Now we test whether these MSRs actually increase to avoid
such foot-shooting.
Reported by: dim
Tested by: dim
from scratch. Remove htole16() calls, rxon.chan is an uint8_t,
ieee80211_chan2ieee() does return an ic_ieee as an int, but I heavily
doubt a htole16() will buy us anything here.
- IWN_TXOP_TO_US is equal to IEEE80211_TXOP_TO_US
- use IEEE80211_DUR_TU
- ieee80211_add_rates/ieee80211_add_xrates are public, use em
- copied ieee80211_add_ssid it is not public
32 bits. Some times compiler inserts unnecessary instructions to preserve
unused upper 32 bits even when it is casted to a 32-bit value. It reduces
such compiler mistakes where every cycle counts.
Instead of spinning in a tight loop for up to 15 seconds, polling for device
readiness while it spins up, return reset completion just after PHY reports
"connect well" or 100ms connection timeout. If device was found, use callout
for checking device readiness with 100ms period up to full 31 second timeout.
This fixes system freeze for 5-10 seconds on drives hot plug-in.
mount point crossings correctly. It was testing the wrong flag.
Also, try harder to make sure that the fsid is different than
the one assigned to the client mount point, by hashing the
server's fsid (just to create a different value deterministically)
when it is the same.
MFC after: 2 weeks
details of each rman header, but not the contents of all rman structures
in the system. This is especially useful on platforms where some rmans
have many thousands of entries in rmans, making scrolling through the
output of "show all rman" impractical. Individual rmans can then be viewed
including their contents with "show rman 0xaddr" as usual.
Reviewed by: jhb
- make SATA SIMs announce capabilities to handle SDB with Notification bit;
- make PMP driver honor this SIMs capability;
- make SATA XPT to negotiate and enable this feature for ATAPI devices.
This feature allows supporting SATA ATAPI devices to inform system about
some events happened, that may require attention. In my case this allows
LG GH22LS50 SATA DVR-RW drive to report tray open/close events. Events
reported to CAM in form of AC_SCSI_AEN async. Further they could be used
as a hints for checking device status and reporting media change to upper
layers, for example, via spoiling mechanism of GEOM.
diversity.
This is bit dirty and likely should be revised at a later date,
with an eye to unifying/tidying up the whole diversity setup
and allowing developers to do "tricky stuff" as they desire.
For now, this works.
* add a new method, specifically for doing per-RX packet
antenna diversity
* set that HAL method only if it's Kite and a Kite chip that
does diversity.
* add a diversity flag to the HAL debugging section
* add a check to make sure the kite diversity code doesn't run
on boards that don't require it, as not all Kite chips will
implement it.
* add some debug statements when the diversity code makes
changes to the antenna diversity/combining setup.
controller port readiness (that should set just after PHY ready signal),
reduce wait time from 10s to 1s before trying more aggressive reset method.
This should improve system responsibility in some failure conditions.
Note: this HAL currently only supports the AR9285.
From Linux ath9k:
The problem is that when the attenuation is increased,
the rate will start to drop from MCS7 -> MCS6, and finally
will see MCS1 -> CCK_11Mbps. When the rate is changed b/w
CCK and OFDM, it will use register desired_scale to calculate
how much tx gain need to change.
The output power with the same tx gain for CCK and OFDM modulated
signals are different. This difference is constant for AR9280
but not AR9285/AR9271. It has different PA architecture
a constant. So it should be calibrated against this PA
characteristic.
The driver has to read the calibrated values from EEPROM and set
the tx power registers accordingly.
not believe that these leaks had a practical impact,
since the situations in which they would have occurred
would have been extremely rare.
MFC after: 2 weeks
MPERF MSRs are available. It was disabled in r216443. Remove the earlier
hack to subtract 0.5% from the calibrated frequency as DELAY(9) is little
bit more reliable now.
Instead of spinning in a tight loop for up to 15 seconds, polling for device
readiness while it spins up, return reset completion just after PHY reports
"connect well" or 100ms connection timeout. If device was found, use callout
for checking device readiness with 100ms period up to full 31 second timeout.
This fixes system freeze for 5-10 seconds on drives hot plug-in.
embedded flash stores.
Some devices - notably those with uboot - don't have an
explicit partition table (eg like Redboot's FIS.)
geom_map thus provides an easy way to export the hard-coded
flash layout as geom providers for use by filesystems and
other tools.
It also includes a "search" function which allows for
dynamic creation of partition layouts where the device only
has a single hard-coded partition. For example, if
there is a "kernel+rootfs" partition, a single image can
be created which appends the rootfs after the kernel with
an appropriate search string. geom_map can be told to
search for said search string and create a partition
beginning after it.
Submitted by: Aleksandr Rybalko <ray@dlink.ua>
bus driver at detach, hence ehci_detach() does exactly this since r199718.
Submitted by: Luiz Otavio O Souza
MFC after: 7 days
Approved by: thompsa (mentor)
of NFSv2 getting an error return from VOP_MKNOD(). Without this
patch, the server file system remains busy after an NFSv2
VOP_MKNOD() fails.
MFC after: 2 weeks
SCSI status errors to CAM (that was wrong, as it too often turned retriable
wire errors into non-retriable REQUEST SENSE errors), do it only for STALL
errors on control pipe of the CBI devices. STALL on control pipe is just
a one of the ways to report error for CBI devices.
PR: usb/150401, usb/154593.
Reviewed by: hselasky
MFC after: 1 week
for a new journal specific partial truncate routine.
- Use dep_current[] in place of specific dependency counts. This is
automatically maintained when workitems are allocated and has
less risk of becoming incorrect.
the experimental NFS server, so that it doesn't leak memory
when unloaded. However, unloading the NFSv4 server is not
recommended, since all NFSv4 state will be lost by the unload
and clients will have to recover the state after a server
reload/restart as if the server crashed/rebooted.
MFC after: 2 weeks
- Keep a hash of indirect blocks that have recently been freed and are
still referenced in the journal.
- Lookup blocks in this hash before forcing a new block write to wait on
the journal entry to hit the disk. This is only necessary to avoid
confusion between old identities as indirects and new identities as
file blocks.
- Don't free jseg structures until the journal has written a record that
invalidates it. This keeps the indirect block information around for
as long as is required to be safe.
- Force an empty journal block write when required to flush out stale
journal data that is simply waiting for the oldest valid sequence
number to advance beyond it.
VOP_LOOKUP() returned. This fixes a bug in the experimental
NFS server for the case where VFS_VGET() fails returning EOPNOTSUPP
in the ReaddirPlus RPC, forcing the use of VOP_LOOKUP() instead.
MFC after: 2 weeks
workaround for fdescfs to not panic when ncookies is not NULL, similar
to the one committed as r152254, but simpler, due to fdescfs_readdir()
not calling vfs_read_dirent().
PR: kern/156177
MFC after: 1 week
working. We store v4 and v6 addresses as a union but for v4-mapped
addresses only store the 32bits w/o the ::ffff: word. That failed the
check as for example 127.0.0.1 would be ::7f00:1 rather than ::ffff:7f00:1
and the IN6_IS_ADDR_V4MAPPED() never worked here. Given we can hardly get
here with an unbound local address or invalid inp_vflags remove the check.
Reported by: tuexen
Reviewed by: tuexen
MFC after: 3 days
some more. Similar to what we do for TCP check for v4-mapped
addresses and then handle them or the normal v6 address case.
For either set inp_vflags before calling into the pcb connect
function so that we have an unambiguous view in case we need to
set the local address or port.
Looked at: tuexen (as part of more)
MFC after: 3 days
update_gdt_{f,g}sbase. The functions set the flag when td == curthread,
and sysarch is always called with curthread.
Reviewed by: jhb, jkim
MFC after: 1 week
Thread might be preempted after testing, which causes the flag to be
cleared. If ast was not delivered, we will do sysret with potentially
wrong fs/gs bases.
Reviewed by: jhb, jkim
MFC after: 1 week (together with r220430, r220452)
for a detailed explanation of the problems).
The only difference with the previous fix is in Solution2:
CPUBLOCK is no longer set when exiting from callout_reset_*() functions,
which avoid the deadlock (leading to r217161).
There is no need to CPUBLOCK there because the running-and-migrating
assumption is strong enough to avoid problems there.
Furthermore add a better !SMP compliancy (leading to shrinked code and
structures) and facility macros/functions.
Tested by: gianni, pho, dim
MFC after: 3 weeks
on per-device basis.
- While adding support for per-device sysctls, merge from graid branch
support for ADA_TEST_FAILURE kernel option, which opens few more sysctl,
allowing to simulate read and write errors for testing purposes.
return. The ast() function may cause a context switch in which case
PCB_FULL_IRET would be set in the pcb. However, the code was not
rechecking the flag after ast() returned and would not properly restore
the FSBASE and GSBASE MSRs. To fix, recheck the PCB_FULL_IRET flag after
ast() returns.
While here, trim an instruction (and memory access) from the doreti path
and fix a typo in a comment.
MFC after: 1 week
This introduces struct ieee80211_rx_stats - which stores the various kinds
of RX statistics which a MIMO and non-MIMO 802.11 device can export.
It also fleshes out the mimo export to userland (node_getmimoinfo()).
It assumes that MIMO radios (for now) export both ctl and ext channels.
Non-11n MIMO radios are possible (and I believe Atheros made at least
one), so if that chipset support is added, extra flags to the
struct ieee80211_rx_stats can be added to extend this support.
Two new input functions have been added - ieee80211_input_mimo() and
ieee80211_input_mimo_all() - which MIMO-aware devices can call with
MIMO specific statistics.
802.11 devices calling the non-MIMO input functions will still function.
ctl/ext noise floor values.
This routine doesn't check to see whether the radio is MIMO
capable - instead, it simply returns either the raw values,
the "nominal" values if the raw values aren't yet available
or are invalid, or '0' values if there's no valid channel/
no valid MIMO values.
Callers are expected to verify the radio is a MIMO radio
(which for now means it's an 11n chipset, there are non-11n
MIMO chipsets out there but I don't think we support them,
at least in MIMO mode) before exporting the MIMO values.
upper-level HAL.
Right now the per-chain noise floor values aren't used anywhere in
the upper-level HAL, so the driver currently has no real reference
to compare the per-chain RSSI values to.
This is needed before per-chain RSSI values (for ctl and ext radios)
are can be thrown upstairs to the net80211 code.
safer for i386 because it can be easily over 4 GHz now. More worse, it can
be easily changed by user with 'machdep.tsc_freq' tunable (directly) or
cpufreq(4) (indirectly). Note it is intentionally not used in performance
critical paths to avoid performance regression (but we should, in theory).
Alternatively, we may add "virtual TSC" with lower frequency if maximum
frequency overflows 32 bits (and ignore possible incoherency as we do now).
path via the sysretq instruction to return from the system call. This was
removed in 190620 and not quite fully restored in 195486. This resolves
most of the performance regression in system call microbenchmarks between
7 and 8 on amd64.
Reviewed by: kib
MFC after: 1 week
chain to be corrupted.
- Removed many console print warnings and replaced with driver maintained
counters.
- Several style(9) fixes.
MFC after: One week.
