wpaul
ee7236e27a
Make sure xdr_ypresp_all_seq() always returns a sane 'status' value.
...
(There were cases where it was leaving the status uninitialized.)
1996-02-04 05:05:43 +00:00
wosch
7473bef6df
Support killing of suid programs.
...
Now ``killall xterm'' works :-)
Don't fail for processes with meta chars (c+++)
1996-02-03 22:52:27 +00:00
joerg
0989a701a0
Try to preserve the fdisk table in the primary bootstrap, should it
...
already exist.
Mention the cases where this doesn't work in the BUGS section of the
man page.
1996-02-03 21:14:09 +00:00
joerg
b7b17e09c4
Create symlinks for vnboot and bootvn, too.
1996-02-03 21:12:27 +00:00
jfieber
f0814f742d
Fixed botched addition of Alexander Seth Jones.
...
Remember, checking for botched changes is as simple as typing `make'!
1996-02-03 17:17:56 +00:00
ache
7bf1219d00
Print out media catalog number, if exists
1996-02-03 15:21:30 +00:00
ache
b2a974e602
Request/print out media catalog validation info in status command
1996-02-03 15:07:32 +00:00
peter
1146260c40
Fill in a lot of the missing blanks from the version I posted...
...
(better check to see that I've not misspelt somebody's name here, this
info was collected from some strange places..)
1996-02-03 14:50:52 +00:00
ache
7e54aa0dab
Implement CD_MEDIA_CATALOG request for read_subchannel
...
Obtained from: NetBSD
1996-02-03 14:33:56 +00:00
ache
a7443136fb
Since ioc_read_subchannel don't used for hardware, remove padding.
...
Now almost all my changes backed out, expect one comment
about network byte order of LBA.
1996-02-03 14:19:13 +00:00
ache
a768aedccd
Implement several new commands
1996-02-03 14:13:36 +00:00
joerg
660a4cf0c0
Add a quirk record for the Tandberg 42XX series. Not only that these
...
drives require ST_Q_SNS_HLP, they also wrongly accept a blocksize of
1024 in the first place (for a QIC-150 cartridge), but complain later
about it. The hack is to only probe for 512 for them.
Reorder the entries in st_decide_mode() so that QIC >= 525 is properly
accepted as variable blocksize.
1996-02-03 13:31:13 +00:00
joerg
aa3af1501b
Fix the borokeness that crept in with rev 1.10 of parser.c, the sh
...
didn't correctly start background jobs anymore. Strange that nobody
was complaining...
Add a dummy target for `builtins' in the Makefile, to prevent it
from attempting to build this file by compiling builtins.c. :-/
1996-02-03 13:27:55 +00:00
markm
b79e54892f
Rename des_set_key -> des_set_key_krb. (libdes conflict)
1996-02-03 11:51:19 +00:00
markm
89c4fd7018
Rename des_set_key -> des_set_key. (libdes conflict)
1996-02-03 11:49:29 +00:00
phk
fb13b8ddcf
Make the sorting of IPFW rules an option. You don't want it to sort them.
...
>>>WARNING<<< you may have to revisit your firewall setup.
1996-02-03 11:48:12 +00:00
markm
60a1d6bd12
Rename des_set_key -> des_set_key_krb. This was a name conflict with a
...
documented routine in libdes.
1996-02-03 11:40:16 +00:00
wosch
e20f3b0b19
Submitted by: pst
...
add forgotten file calendar.h. Sorry.
1996-02-03 10:58:11 +00:00
pst
b9e1cc58c2
Add qcam.4 to directory, was only mlinking
1996-02-03 07:43:21 +00:00
pst
16649f0763
Only print statistics in verbose mode
1996-02-03 06:33:23 +00:00
ache
12102ecb9d
Detect yet one kind of device (taken from NetBSD)
...
Use more accurate TOC size calculation
1996-02-03 00:06:49 +00:00
jkh
21c9c34c6c
Add install script for doc, make bin install more intelligent.
1996-02-02 23:53:48 +00:00
ache
a724de6de3
Simplify READTOCENTRYS by removing fake leadout code,
...
SCSI system do it for us
1996-02-02 23:43:40 +00:00
joerg
ab6036fedf
Mention the currently supported vendor/model strings.
1996-02-02 23:01:17 +00:00
joerg
e23399eaf5
Add the HP4020i CD-R as a known device.
...
Reorder the CD-R entries in knowndevs[].
Submitted by: fred@jjarray.umd.edu (Fred Cawthorne)
1996-02-02 22:59:48 +00:00
joerg
e13396326f
Add the Emulex MD21 ESDI-to-SCSI bridge as a known device (with more than
...
one LUN).
Submitted by: Wilko Bulte
1996-02-02 22:57:27 +00:00
mpp
4b1008ade9
Added a FreeBSD specific crash(8) man page that was adapted from
...
the hp300 crash(8) man page in the lite-2 source tree.
Also removed man8/makedev.8 (this was vax specific and was replaced
by man8/man8.i386/MAKEDEV.8 a long time ago - it was just never removed
from the source tree).
1996-02-02 22:17:04 +00:00
ache
d54012cef4
Don't mask last track number with end word, better be shure that it is 170
1996-02-02 22:14:39 +00:00
ache
bc4a7990f2
Implement PREVENT & CLOSE ioctls
1996-02-02 22:08:28 +00:00
ache
8b50fd992a
Implement 'inject' command
1996-02-02 22:03:37 +00:00
ache
f690ea66de
Remove close tray on open - works very bad with xcdplayer
1996-02-02 21:18:02 +00:00
ache
1dbf29acdc
Exchange addr_type<->control
1996-02-02 20:54:27 +00:00
ache
92f57819e0
Calculate TOC size to match what scsi cd says.
...
Exchange control<->addr_type fields
1996-02-02 20:50:04 +00:00
ache
62a0fe7554
Back out my control->addr_type change, need to be fixed in another place
1996-02-02 20:46:46 +00:00
ache
00cb60f46f
I forget the fact that cd_read_toc reads toc header in any case
1996-02-02 20:43:11 +00:00
ache
de77025d55
Remove #pragma pack, use byte filler in ioc_read_subchannel
...
instead, all other structures already aligned
1996-02-02 20:41:11 +00:00
pst
26db461f3e
Remove the ability for the user mode programs to specify bidirectional
...
vs unidirectional transfer modes. The kernel handles hardware, user mode
programs shouldn't get in the way.
This cleans up some really ugly grots that I hated too. :-)
Suggested by: Sujal Patel <smpatel@wam.umd.edu>
1996-02-02 20:37:51 +00:00
pst
4207bcc720
Add support for Connectix QuickCam(tm)
...
* this is my unoptimized driver, it works fine, it's not as fast as it
* could be (yet) -- I have yet to merge in ideas from other QuickCam
* developers.
1996-02-02 19:27:57 +00:00
pst
2982676e0d
Add support for Connectix QuickCam(tm)
...
* warning: this user interface is still in flux pending negotiations
* with other quickcam driver authors. It is _not_ compatible with the
* original linux interface due to the fact that it was too restrictive.
1996-02-02 19:26:37 +00:00
pst
ef78cb2df2
Add support for Connectix QuickCam(tm)
1996-02-02 19:25:24 +00:00
pst
acb82eb21b
Add Peter's list of major numbers
1996-02-02 19:12:43 +00:00
dg
ee3d120406
Killed last change - it was bogus. cpu_switch() already assumes that
...
return address is on the stack.
1996-02-02 18:30:06 +00:00
mpp
3c9b360579
Fix some incorrect locations in the FILES sections of some man pages.
1996-02-02 18:22:04 +00:00
mpp
c6120ae4f8
Added missing gsc(4) (Genius scanner related man page).
1996-02-02 18:12:12 +00:00
mpp
4ea9ae6b00
Add some missing manual page links.
1996-02-02 17:48:46 +00:00
pst
9cb3ec85d3
Add in hooks for quickcam driver
1996-02-02 06:55:35 +00:00
wosch
114c8c73e7
recursive grep, enabled with -DHAVE_FTS=1
...
enable mmap (-DHAVE_MMAP=1)
1996-02-02 06:45:26 +00:00
jkh
64d13f8d9c
Understand about the doc distribution.
1996-02-02 06:44:02 +00:00
wosch
e09588cb82
man page link tmpfs.8 -> mfs.8 for former SunOS users
1996-02-02 06:31:57 +00:00
hsu
dc7dcae547
There is no longer a typedef clash with <rpc/auth.h>, so remove
...
conditional. Also, use the system defined fixed sized types.
This removes a 32-bit dependency on non-32-bit architectures.
1996-02-02 06:17:42 +00:00