Add 64-bit address support to Cadence CGEM Ethernet driver for use in
other SoCs such as the Zynq UltraScale+ and SiFive HighFive Unleashed.
Reviewed by: philip, 0mp (manpages)
Differential Revision: https://reviews.freebsd.org/D24304
When we already have the vm page in hand, use vm_page_domain() instead
of vm_phys_domain(). The former has a trivial constant-time
implementation whereas the latter iterates over the mem_affinity array.
Reviewed by: kib, markj
Differential Revision: https://reviews.freebsd.org/D28005
The iflib_queues_alloc() allocates isc_nrxqs iflib_dma_info structs
for each rxqset, and links each struct to a different free list.
As a result, it must be isc_nrxqs >= isc_nfl (plus the completion
queue, if present).
Add an assertion to make this constraint explicit.
MFC after: 2 weeks
Since 1d238b07d5, krings are disabled before
a reinit cycle triggered by iflib_netmap_register.
However, this operation is actually necessary also for
any interface reinit triggered by other causes (i.e.,
ifconfig commands).
We achieve this goal by moving the krings enable/disable
operation inside iflib_stop() and iflib_init_locked().
Once here, this change also removes some redundant operations
from iflib_netmap_register(), that are already performed by
iflib_stop().
PR: 252453
MFC after: 1 week
which makes stack prot correct for non-main threads created by binaries
with statically linked libthr.
Cache result, but do not engage into the full double-checked locking,
since calculation of the return value is idempotent.
PR: 252549
Reported and reviewed by: emaste
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28075
Track the the current lock/reference state in a single variable,
rather than deducing the proper prison_deref() flags from a
combination of equations and hard-coded values.
Despite TMPFS_UNLOCK() is done in both paths later, unlocking not locked
mutex provides different failure mode.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Detect and use RDTSCP if available, instead of fence+RDTSC. For AMD Zens+,
use LFENCE+RDTSC instead of RDTSCP (or MFENCE;RDTSC previously).
Reviewed by: gallatin, markj
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27986
Create array of rdtsc selectors and provide helper that calculate the
index into the selectors array.
Reviewed by: gallatin, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27986
Instead of providing ifuncs for each kind of fence, define ifuncs
that combine fence and invocation of RDTSC. This refactoring makes
introduction of RDTSCP use possible.
Reviewed by: gallatin, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27986
Use it in preference of Xfenced RDTSC if RDTSCP is supported. It is
recommended by both Intel and AMD. But, on AMD Zens and newer use
LFENCE, as recommended by AMD [*]. In particular, this means that now
AMD CPUs use more appropriate fence instead of too harsh MFENCe.
Add comment explaining the intent of the selection logic.
Reported by: gallatin [*]
Reviewed by: gallatin, markj
Tested by: gallatin, pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27986
Instead of trying to maintain pg_jobc counter on each process group
update (and sometimes before), just calculate the counter when needed.
Still, for the benefit of the signal delivery code, explicitly mark
orphaned groups as such with the new process group flag.
This way we prevent bugs in the corner cases where updates to the counter
were missed due to complicated configuration of p_pptr/p_opptr/real_parent
(debugger).
Since we need to iterate over all children of the process on exit, this
change mostly affects the process group entry and leave, where we need
to iterate all process group members to detect orpaned status.
(For MFC, keep pg_jobc around but unused).
Reported by: jhb
Reviewed by: jilles
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27871
This improves code structure and allows to put the lock asserts right
into place where the locks are needed.
Also move zeroing of the kinfo_proc structure from fill_kinfo_proc_only()
to fill_kinfo_proc(), this looks more symmetrical.
Reviewed by: jilles
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27871
Proctree lock is needed for correct calculation and collection of the
job-control related data in kinfo_proc. There was even an XXX comment
about it.
Satisfy locking and lock ordering requirements by taking proctree lock
around pass over each bucket in proc_iterate(), and in sysctl_kern_proc()
and note_procstat_proc() for individual process reporting.
Reviewed by: jilles
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27871
Increase the scope of the process group lock ownership. This ensures that
we are consistent in returning EIO for tty write from an orphan and delivery
of TTYOUT signals.
Reviewed by: jilles
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27871
Often, we have a process locked and need to get locked process group.
In this case, because progress group lock is before process lock,
unlocking process allows the group to be freed. See for instance
tty_wait_background().
Make pgrp structures allocated from nofree zone, and ensure type stability
of the pgrp mutex.
Reviewed by: jilles
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27871
Similarly to what done for iflib in 1d238b07d5,
this patch prevents access to the krings during the interface
reset triggered by netmap_register().
MFC after: 1 week
The netmap_reset() function is meant to be called by the driver
when they initialize (or re-initialize) a hardware ring.
However, since the introduction of support for opening (in
netmap mode) a subset of the available rings, netmap_reset()
may be called multiple times on actively used rings, causing
both kring and netmap ring to transition to an inconsistent
state.
This changes improves the situation by resetting all the
indices fields of the kring to 0, as expected after the
reinitialization of a hardware ring.
PR: 252518
MFC after: 1 week
When netmap_fl_refill() is called at initialization time (e.g.,
during netmap_iflib_register()), nic_i must be 0, since the
free list is reinitialized. At the end of the refill cycle, nic_i
must still be zero, because exactly N descriptors (N is the ring size)
are refilled.
This patch therefore fixes the assertions to check on nic_i rather
than on nm_i. The current netmap_reset() may in fact cause nm_i
to be != 0 while the device is resetting: this may happen when
multiple non-cooperating processes open different subsets of the
available netmap rings.
PR: 252518
MFC after: 1 week
When different processes open separate subsets of the
available rings of a same netmap interface, a device
reset may be performed while one of the processes
is actively using some rings (e.g., caused by another
process executing a nmport_open()).
With this patch, such situation will cause the
active process to get a POLLERR, so that it can
have a chance to detect the situation.
We also guarantee that no process is running a txsync
or rxsync (ioctl or poll) while an iflib device reset
is in progress.
PR: 252453
MFC after: 1 week
This imposes a fairly severe limitation on space available for mmap that
was not noticed prior to commit. Unfixed mmap will only map from
[data + MAXSIZE, end of user VA space], bringing the amount of usable space
down way too low for non-trivial link jobs (for instance).
Reported by: mmel
When using NOTE_NSECONDS in the kevent(2) API, US_TO_SBT should be
used instead of NS_TO_SBT, otherwise the timeout results are
misleading.
PR: 252539
Reviewed by: kevans, kib
Approved by: kevans
MFC after: 3 weeks
ldd had #defines for AOUT, ELF, and ELF32. The removal of AOUT left a
possibly confusing gap. These are not used anywhere but this file so
renumber to avoid the gap.
Reported by: allanjude
Previously -q (just print a line when files differ) ignored flags like
-w (ignore whitespace). Avoid the D_BRIEF short-circuit when flags are
in effect.
PR: 252515
Reported by: Scott Aitken
Reviewed by: kevans
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28064
Add two simple examples showing the use of the flags: d, n, s, t
While here, reorder cross references properly by section
Bump .Dd
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D27540
last(1): Bump .Dd
Add some examples showing the use of the flags: a, k, P, w
Reviewed by: gbe@, yuripv@
Approved by: manpages (gbe@)
Differential Revision: https://reviews.freebsd.org/D27545
This module intended to measure performance of routing lookups.
Uses a list of IP addresses specified by sysctl one-by-one.
Performance testing is triggered by changing sysctl OID with a number of lookups to execute.
Lookups are done by the chunks of 10K routes, entering/exiting epoch on
chunk granularity to amortise cost.
Example:
make -C sys/modules/test/fib_lookup unload load
for i in `cat ~/ip4.txt`; do sysctl net.route.test.add_inet_addr=$i; done
for i in `cat ~/ip6.txt`; do sysctl net.route.test.add_inet6_addr=$i; done
sysctl net.route.test.run_inet=10000000
dmesg | tail
Dec 13 23:24:05 current kernel: 10000000 packets in 417240173 nanoseconds, 23967011 pps
Dec 13 23:24:06 current kernel: run: 10000000 packets vnet 0xfffff80003073f00
Dec 13 23:24:07 current kernel: 10000000 packets in 423086254 nanoseconds, 23635842 pps
Differential Revision: https://reviews.freebsd.org/D27604
