Libedit's vi mode provides a v command to edit the current line in vi(1)
(hard-coded to vi, in fact).
When Unicode/wide character mode was added, this command started truncating
and/or corrupting the edited text.
This commit fixes v if the text fits into the buffer. If the text is longer,
it is truncated.
PR: 203743
Obtained from: NetBSD (originally submitted by me)
This call may be used when device cannot continue to operate normally
(e.g., throws firmware error, watchdog timer expires)
and need to be restarted.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D3998
window in number of segments on fly. It is set to 10 segments by default.
Remove net.inet.tcp.experimental.initcwnd10 which is now redundant. Also remove
the parent node net.inet.tcp.experimental as it's not needed anymore and also
because it was not well thought out.
Differential Revision: https://reviews.freebsd.org/D3858
In collaboration with: lstewart
Reviewed by: gnn (prev version), rwatson, allanjude, wblock (man page)
MFC after: 2 weeks
Relnotes: yes
Sponsored by: Limelight Networks
The "files" staging name is not the same as "bsd.files.mk" but seems to just be
a group of extra files that are not the essential includes or libraries, which
include .
Sponsored by: EMC / Isilon Storage Division
* refactor out the rx filter and operating mode code into a separate
method.
* add some comments about what's left with setting the operating mode
based on what carl9170 does.
* comment out some init from otus_init_mac() - it's no longer needed as
it's always init'ed now.
* add debugging and a missing return around a failure to call m_get2() -
during monitor mode operation I found RXing of frames > 2k, which
fails allocation. I'm sure they're valid (it's configuring 11n RX and
receiving 11n frames even though the driver doesn't "do" 11n)
and may be A-MSDU; but allocations fail and we should handle that
gracefully.
Tested:
* UB82 reference NIC (AR9170 + AR9104 2x2 dual band NIC); STA and
monitor mode operation.
degradation (7%) for host host TCP connections over 10Gbps links,
even when there were no secuirty policies in place. There is no
change in performance on 1Gbps network links. Testing GENERIC vs.
GENERIC-NOIPSEC vs. GENERIC with this change shows that the new
code removes any overhead introduced by having IPSEC always in the
kernel.
Differential Revision: D3993
MFC after: 1 month
Sponsored by: Rubicon Communications (Netgate)
allows scripts to distinguish it between real fatal errors, for instance a
CRC mismatch.
Update manual page for the behavior change.
PR: bin/203873
Submitted by: Eugene Grosbein <eugen grosbein net>
MFC after: 2 weeks
The IOAT hardware supports writing a 64-bit pattern to some destination
buffer. The same limitations on buffer length apply as for copy
operations. Throughput is a bit higher (probably because fill does not
have to spend bandwidth reading from a source in memory).
Support for testing Block Fill has been added to ioatcontrol(8) and the
ioat_test device. ioatcontrol(8) accepts the '-f' flag, which tests
Block Fill. (If the flag is omitted, the tool tests copy by default.)
The '-V' flag, in conjunction with '-f', verifies that buffers are
filled in the expected pattern.
Tested on: Broadwell DE (Xeon D-1500)
Sponsored by: EMC / Isilon Storage Division
Add generic hw descriptor struct and generic control flags struct, in
preparation for other kinds of IOAT operation.
Sponsored by: EMC / Isilon Storage Division
CXXFLAGS to sub-makes.
The bad passing also causes bsd.dep.mk's logic to selectively pull only some
flags from C[XX]FLAGS to not apply which can be seen with '-L' being passed to
mkdep when using an external compiler.
Now on 24xx and above chips it is really possible to simulate several
virtual FC ports with single physical one. For example, it allows to
configure several targets in ctl.conf, assign each of them to separate
virtual port, and let user to control access to them with switch zoning.
I still doubt that all problems are solved there, but at now it passes
at least basic tests.
Previously, the parameters of 'zfs holds' could only be snapshots
Add -d <depth> flag to limit depth of recursion
Add -p flag to print literal values, rather than interpreted values
Add -H flag to suppress header output and use tabs rather than whitespace
Reviewed by: mahrens, smh, dteske
Approved by: bapt (mentor)
MFC after: 3 weeks
Relnotes: yes
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D3994
The new load_ma implementation can cause dereferences when used with
certain drivers, back it out until the reason is found:
Fatal trap 12: page fault while in kernel mode
cpuid = 11; apic id = 03
fault virtual address = 0x30
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff808a2d22
stack pointer = 0x28:0xfffffe07cc737710
frame pointer = 0x28:0xfffffe07cc737790
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 13 (g_down)
trap number = 12
panic: page fault
cpuid = 11
KDB: stack backtrace:
#0 0xffffffff80641647 at kdb_backtrace+0x67
#1 0xffffffff80606762 at vpanic+0x182
#2 0xffffffff806067e3 at panic+0x43
#3 0xffffffff8084eef1 at trap_fatal+0x351
#4 0xffffffff8084f0e4 at trap_pfault+0x1e4
#5 0xffffffff8084e82f at trap+0x4bf
#6 0xffffffff80830d57 at calltrap+0x8
#7 0xffffffff8063beab at _bus_dmamap_load_ccb+0x1fb
#8 0xffffffff8063bc51 at bus_dmamap_load_ccb+0x91
#9 0xffffffff8042dcad at ata_dmaload+0x11d
#10 0xffffffff8042df7e at ata_begin_transaction+0x7e
#11 0xffffffff8042c18e at ataaction+0x9ce
#12 0xffffffff802a220f at xpt_run_devq+0x5bf
#13 0xffffffff802a17ad at xpt_action_default+0x94d
#14 0xffffffff802c0024 at adastart+0x8b4
#15 0xffffffff802a2e93 at xpt_run_allocq+0x193
#16 0xffffffff802c0735 at adastrategy+0xf5
#17 0xffffffff80554206 at g_disk_start+0x426
Uptime: 2m29s
Add a new flag for DMA operations, DMA_NO_WAIT. It behaves much like
other NOWAIT flags -- if queueing an operation would sleep, abort and
return NULL instead.
When growing the internal descriptor ring, the memory allocation is
performed outside of all locks. A lock-protected flag is used to avoid
duplicated work. Threads that cannot sleep and attempt to queue
operations when the descriptor ring is full allocate a larger ring with
M_NOWAIT, or bail if that fails.
ioat_reserve_space() could become an external API if is important to
callers that they have room for a sequence of operations, or that those
operations succeed each other directly in the hardware ring.
This patch splits the internal head index (->head) from the hardware's
head-of-chain (DMACOUNT) register (->hw_head). In the future, for
simplicity's sake, we could drop the 'ring' array entirely and just use
a linked list (with head and tail pointers rather than indices).
Suggested by: Witness
Sponsored by: EMC / Isilon Storage Division
Internal busses (thus ECAM access) should be mapped to
all values from 0 to 143.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D3753
When one tries to allocate a resource with unspecified range,
read already configured BAR values (by UEFI or whatever).
This is necessary to make VNIC VFs working and to allow them to be
properly allocated.
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D3752
Assertion used here was invalid. If current thread helds any of locks,
we never want to recurse on them.
Obtained from: Semihalf
Submitted by: Bartosz Szczepanek <bsz@semihalf.com>
Differential revision: https://reviews.freebsd.org/D3903
