ache
f2e89ce1f4
Remove unneded -ltermcap or -lmytinfo
2000-09-16 04:19:07 +00:00
ache
26c63f1d73
Remove unneded -lmytinfo
2000-09-16 03:56:25 +00:00
ache
e5f9e7dd4a
Remove unneded -ltermcap or -lmytinfo
2000-09-16 03:52:06 +00:00
ache
7a44ca40ed
Remove unneded -lmytinfo
2000-09-16 03:33:00 +00:00
ache
ac8e5477e1
Remove unneded -ltermcap
2000-09-16 03:30:50 +00:00
ache
dc31e95116
Remove unneded -lmytinfo
2000-09-16 03:27:54 +00:00
imp
9702a86bb8
Add warning about laptops needing pmtimer device for proper suspend/resume
...
functionality.
2000-09-16 03:08:55 +00:00
jlemon
fcb3d1e56c
It is possible for a TCP callout to be removed from the timing wheel,
...
but have a network interrupt arrive and deactivate the timeout before
the callout routine runs. Check for this case in the callout routine;
it should only run if the callout is active and not on the wheel.
2000-09-16 00:53:53 +00:00
jhb
310c27a1c9
Remove some commented out cruft.
2000-09-15 23:00:46 +00:00
jhb
6aa22e7189
- Add a new process flag P_NOLOAD that marks a process that should be
...
ignored during load average calcuations.
- Set this flag for the idle processes and the softinterrupt process.
2000-09-15 22:00:23 +00:00
bmah
8b1e8bae5a
Add release note for netgraph enhancements/improvements.
...
Submitted by: archie
2000-09-15 20:52:03 +00:00
jhb
9028b0eeb4
Idle processes are always runnable, so let them state at SRUN.
2000-09-15 19:49:48 +00:00
jhb
ad31d928a6
Release Giant before starting up init.
...
Submitted by: jake
2000-09-15 19:25:29 +00:00
iwasaki
294b957fa6
Fix typo (rc.conf -> pccard.conf).
...
Submitted by: OKAZAKI Tetsurou <okazaki@be.to>
2000-09-15 19:17:40 +00:00
jhb
3bfd6f0c52
Use driver_intr_t instead of the now defunct inthand2_t.
2000-09-15 19:09:15 +00:00
ume
d98e9631e3
examined the gateway (from the routing table) only when the address
...
family of the gateway is AF_INET6.
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
2000-09-15 17:21:35 +00:00
ru
8f94bca53c
Add -Wmissing-prototypes.
2000-09-15 15:37:16 +00:00
green
85ac235bec
Also coerce diff(1) into working the other way (from no-\n to \n).
...
Taking out the evil warning fixed it one way, but didn't make the
other way any better, so replace it with printing a single \n.
2000-09-15 11:35:16 +00:00
n_hibma
10d32c8e99
Reserve major number 156 for uscanner
2000-09-15 10:27:01 +00:00
jkh
7d9eed4530
Correct variable check for VAR_TRY_DHCP.
2000-09-15 08:15:14 +00:00
ache
d331a0c108
Use MTREE_FOLLOWS_SYMLINKS option
...
This is part of whole subsystem fixing
Reviewed by: imp
2000-09-15 08:08:04 +00:00
ache
d98104c516
Add/use MTREE_FOLLOWS_SYMLINKS make.conf option
...
This is part of whole subsystem fixing
Reviewed by: imp
2000-09-15 08:07:05 +00:00
dcs
c1fd1180ab
Factorize, reorganize, and move code around.
...
The boot-conf and boot code had various bugs, and some of it was big,
ugly, unwieldy, and, sometimes, plain incorrect. I'm just about
completely replaced these ugly parts with something much more manageable.
Minor changes were made to the well-factorized parts of it, to accomodate
the new code.
Of note:
* make sure boot-conf has the exact same behavior wrt boot order
as start.
* Correct both boot and boot-conf so they'll work correctly when
compiled in, as they both had some bugs, minor and major.
* Remove all the crud from loader.4th back into support.4th, for
the first time since boot-conf was first improved. Hurray!
I'm fairly satisfied with the code at this time. Time to see about those
man pages...
2000-09-15 08:05:52 +00:00
ache
d58c3debc9
Restore standard symlink default, return -L, remove -P, add missing -q to getopt
...
This is part of whole subsystem fixing
Reviewed by: imp
2000-09-15 08:05:37 +00:00
dcs
12daa03d59
Start countdown only _after_ the kernel was loaded. Not very fair otherwise.
2000-09-15 07:54:10 +00:00
markm
fba792ce50
Gosh. I managed to commit the wrong version of this file. Darn;
...
I must remember not to do that again.
(This fixes broken install and distribute targets)
2000-09-15 06:14:02 +00:00
kato
e80d3b3345
Merged from sys/isa/fd.c revision 1.187.
...
Pointed out by: nyan
2000-09-15 05:47:56 +00:00
kato
650d266497
Merged from sys/i386/isa/sio.c revision 1.314.
2000-09-15 05:45:23 +00:00
kato
6c0f3170b5
Merged from sys/i386/isa/clock.c revision 1.157.
2000-09-15 05:42:42 +00:00
kato
0fcfd857e2
Merged from sys/i386/i386/machdep.c revision 1.408.
2000-09-15 05:35:55 +00:00
bmah
829e892a2e
pkg_version(1) will now distinguish between the different cases where
...
the exact relationship between an installed package and its
corresponding entry in the index file can't be determined.
Submitted by: Mark Ovens <marko@freebsd.org>
2000-09-15 04:16:20 +00:00
nyan
9a01225006
Moved the fe driver from the compat section to the correct section.
...
Submitted by: sanpei
2000-09-15 02:25:41 +00:00
ache
ec0b442175
Add sftp-server
2000-09-15 01:04:32 +00:00
jhb
43d09251f2
Check to see if we actually have an interrupt descriptor and an interrupt
...
thread for each interrupt that comes in. If we don't, log the event and
return immediately for a hardware interrupt. For a softinterrupt, panic
instead.
Submitted by: ben
2000-09-15 00:27:57 +00:00
iwasaki
9a638b9d56
Add acpi_send_pm_event() to inform all devices that the system is
...
going to sleep and back from sleep.
Also re-enabling some acpi registers on wakeup.
2000-09-14 23:29:37 +00:00
truckman
48aa25a6f6
Enforce process limit policy in one place to keep proccnt from diverging
...
from reality.
2000-09-14 23:07:39 +00:00
iwasaki
5bb6e489c0
Add manpages acpi userland tools.
...
Obtained from: ACPI for FreeBSD project
2000-09-14 22:48:39 +00:00
iwasaki
8f5360d3cc
Add pmtimer instance.
2000-09-14 22:39:14 +00:00
iwasaki
ee51abd060
Add Timer device driver for power management events.
...
The code for suspend/resume is derived from APM device driver.
Some people suggested the original code is somewhat buggy, but I'd
like to just move it from apm.c without any major changes for the
initial version. This code should be refined later.
To use pmtimer to adjust time at resume time, add
device pmtimer
in your kernel config file, and add
hint.pmtimer.0.at="isa"
in your device.hints
Reviewed by: -current, bde
2000-09-14 22:34:57 +00:00
jhb
45b94b8ee4
Grab the scheduler lock before calling setrunqueue() and mi_switch().
2000-09-14 22:17:34 +00:00
brian
b48cc31f09
Fix some style nits
2000-09-14 22:03:13 +00:00
brian
54bef4135c
Support PPPoATM, disabled for now as /usr/include/netnatm doesn't exist
...
Submitted by: Jakob Stoklund Olesen <stoklund@taxidriver.dk>
2000-09-14 22:02:54 +00:00
mjacob
066132400f
With the help of 'Eric Christeson <echriste@ssesco.com>', determined
...
that QIC 525 really should be 512 byte fixed blocksize.
2000-09-14 21:38:44 +00:00
jlemon
78394a5493
m_cat() can free its second argument, so collect the checksum information
...
from the fragment before calling m_cat().
2000-09-14 21:06:48 +00:00
jhb
ebc05310ca
Remove the mtx_t, witness_t, and witness_blessed_t types. Instead, just
...
use struct mtx, struct witness, and struct witness_blessed.
Requested by: bde
2000-09-14 20:15:16 +00:00
jlemon
094011d95c
Pipes are not writeable while a direct write is in progress. However,
...
the kqueue filter got the sense of the test reversed, so fix it.
Spotted by: Michael Elkins <me@sigpipe.org>
2000-09-14 20:10:19 +00:00
markm
14cd23b120
Take out the RANDOMDEV option. The entropy device is a (pseudo-)device
...
now.
2000-09-14 20:07:32 +00:00
markm
2e83aceb01
Silence the perl build a lot; particularly in the case where a
...
"make all" is being done on top of a "make buildworld", and nothing
needs making.
Asked for by: jkh
2000-09-14 19:58:07 +00:00
wollman
9b6a9d4d1d
Some more slight doco fixes: update date, and add a bit more to the history.
2000-09-14 19:20:17 +00:00
eivind
e6b9704a88
Add function comments for functions missing them
2000-09-14 19:13:59 +00:00