increased to 256TiB. The kernel address space can also be increased to be
the same size, but this will be performed in a later change.
To help work with an extra level of page tables two new functions have
been added, one to file the lowest level table entry, and one to find the
block/page level. Both of these find the entry for a given pmap and virtual
address.
This has been tested with a combination of buildworld, stress2 tests, and
by using sort to consume a large amount of memory by sorting /dev/zero. No
new issues are known to be present from this change.
Reviewed by: kib
Obtained from: ABT Systems Ltd
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5720
different ID space than the kernel. Because of this we need to read the
ID from the hardware. The hardware will provide this value to the CPU by
reading any of the first 8 Interrupt Processor Targets Registers.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D5706
Big buffer size could cause integer overflow and as a result
attempt to copy beyond VM_USERMAX_ADDRESS.
Fixing copyinstr boundary checking where compared value has been
overwritten by accident when setting fault handler.
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D5719
The first of set of patches.
Use wider load/stores when aligned buffer is being copied.
In a simple test:
dd if=/dev/zero of=/dev/null bs=1M count=1024
the performance jumped from 410MB/s up to 3.6GB/s.
TODO:
- better handling of unaligned buffers (WiP)
- implement similar mechanism to bzero
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: kib, andrew, emaste
Differential Revision: https://reviews.freebsd.org/D5664
from userpsace. Previously we could have triggered a panic by trying to
jump to a kernel address from userland as the trap handling code thought we
received an ast in kernel mode.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
It seems that if range within one page is given this page will not be
invalidated at all. Clean it up.
Submitted by: Dominik Ermel <der@semihalf.com>
Obtained from: Semihalf
Sponsored by: Cavium
Reviewed by: wma, zbb
Approved by: cognet (mentor)
Differential Revision: https://reviews.freebsd.org/D5569
- Advertise the word size for CloudABI ABIs via the SV_LP64 flag. All of
the other ABIs include either SV_ILP32 or SV_LP64.
- Fix kdump to not assume a 32-bit ABI if the ABI flags field is non-zero
but SV_LP64 isn't set. Instead, only assume a 32-bit ABI if SV_ILP32 is
set and fallback to the unknown value of "00" if neither SV_LP64 nor
SV_ILP32 is set.
Reviewed by: kib, ed
Differential Revision: https://reviews.freebsd.org/D5560
Need this for gem5, but was not needed on real hadrware (yet) as it
was always MSI.
Reviewed by: andrew, jhb
Discovered by: andrew
Sponsored by: DARPA/AFRL
Differential Revision: https://reviews.freebsd.org/D5494
Things changed:
* do not allocate 4GB of SLI space, because it's the waste of
system resources. Allocate only small portions when needed.
* provide own implementation of activate_resource which performs
address translation between PCI bus and host PA address space.
This is temporary solution, should be replaced by bus_map_resource
once implemented.
Obtained from: Semihalf
Sponsored by: Cavium
Approved by: cognet (mentor)
Reviewed by: jhb
Differential revision: https://reviews.freebsd.org/D5294
Enable system register access for EL2. Alpine-V2 is
the first device requiring this to be enabled.
It is also in-sync with Linux initialization code,
and compatible with Alpine-V2 uboot requirements.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Approved by: cognet (mentor)
Reviewed by: wma
Differential revision: https://reviews.freebsd.org/D5394
Summary:
As part of the migration of rman_res_t to be typed to uintmax_t, memory ranges
must be clamped appropriately for the bus, to prevent completely bogus addresses
from being used.
This is extracted from D4544.
Reviewed By: cem
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5134
If Enhanced Allocation is not used, we can't allocate any random
range. All internal devices have hardcoded place where they can
be located within PCI address space. Fortunately, we can read
this value from BAR.
Obtained from: Semihalf
Sponsored by: Cavium
Approved by: cognet (mentor)
Reviewed by: zbb
Differential revision: https://reviews.freebsd.org/D5455
* provided OFW interface for pci_host_generic (for handling devices which are present in DTS under the PCI node)
* removed support for internal PCI from arm64/cavium
* cleaned up and made most of the code common
Obtained from: Semihalf
Sponsored by: Cavium
Approved by: cognet (mentor)
Reviewed by: zbb
Differential revision: https://reviews.freebsd.org/D5261
need to include it explicitly when <vm/vm_param.h> is already included.
Suggested by: alc
Reviewed by: alc
Differential Revision: https://reviews.freebsd.org/D5379
This simplifies checking for default resource range for bus_alloc_resource(),
and improves readability.
This is part of, and related to, the migration of rman_res_t from u_long to
uintmax_t.
Discussed with: jhb
Suggested by: marcel
Provide bus_get_bus_tag() for sparc64, powerpc, arm, arm64 and mips
nexus and its children in order to return a platform specific default tag.
This is required to ensure generic correctness of the bus_space tag.
It is especially needed for arches where child bus tag does not match
the parent bus tag. This solves the problem with ppc architecture
where the PCI bus tag differs from parent bus tag which is big-endian.
This commit is a part of the following patch:
https://reviews.freebsd.org/D4879
Submitted by: Marcin Mazurek <mma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Annapurna Labs
Reviewed by: jhibbits, mmel
Differential Revision: https://reviews.freebsd.org/D4879
will allow for code that uses the old fdt_get_range and fdt_regsize
functions to find a range, map it, access, then unmap to replace this, up
to and including the map, with a call to OF_decode_addr.
As this function should only be used in the early boot code the unmap is
mostly do document we no longer need the mapping as it's a no-op, at least
on arm.
Reviewed by: jhibbits
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D5258
Some chip revisions don't have their external PCIe buses
behind the internal bridge. Add support for FDT-configurable
PEMs but keep ability for PCIe enumeration.
Reviewed by: andrew, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5285
values.
If switching from a thread that used floating-point registers to a thread
that is still running, but holding the blocked_lock lock we would switch
the curthread to the new (running) thread, then call critical_enter. This
will non-atomically increment td_critnest, and later call critical_exit to
non-atomically decrement this value.
This can happen at the same time as the new thread is still running on the
old core, also calling these functions. In this case there will be a race
between these non-atomic operations. This can be an issue as we could loose
one of these operations leading to the value to not return to zero.
If, later on, we then hit a data abort we check if the td_critnest is zero.
If this check fails we will panic the kernel.
This has been observed when running pcmstat on a Cavium ThunderX. The pcm
thread will use the blocked_lock lock and there is a high chance userspace
will use the floating-point registers. When, later on, pmcstat triggers a
data abort we will hit this panic.
The fix is to update these values after storing the floating-point state.
This means we use the correct curthread while storing the state so it will
not be an issue that the changes to td_critnest are non-atomic.
Sponsored by: ABT Systems Ltd
- Add MOVI command and routine for the LPI migration
- Allow to search for the ITS device descriptor using
not only devID but also LPI number.
- Bind SPIs in the Distributor
- Don't bind its_dev to collection. Keep track of the collection
IDs for each LPI.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5231
- Change locks' names to be more suitable
- Don't use blocking mutex. Lock only basic operations such
as lists or bitmaps modifications.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5230
This should be done by routing all interrupts to CPU0,
different assignment will be induced by either interrupts
shuffling or bus_bind_intr().
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5229
pmc_hook() was called only in case of the stray interrupt but should
rather be called on each interrupt. Move in to the arm_cpu_intr()
handler, out of the critical section too.
Reviewed by: br
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5161
It can be used to bind specific interrupt to a particular CPU.
Requires PIC support for interrupts binding.
Reviewed by: wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5122
Separate interrupt descriptors lookup from allocation. It was possible
to perform config on non-existing interrupt simply by allocating spurious
descriptor.
Must lock the interrupt descriptors table lookup to avoid mismatches.
This ought to prevent trouble while setting up new interrupt
and dispatching existing one.
Use spin mutex rather than sleep mutex. This is mainly due to lock in
arm_dispatch_intr.
This should be eventually changed to a lock-less solution without
walking through a linked list on each interrupt.
Reviewed by: andrew, wma
Obtained from: Semihalf
Sponsored by: Cavium
Differential Revision: https://reviews.freebsd.org/D5121
* Use the Linux compat string
* Use EARLY_DRIVER_MODULE to attach at the right time
* Add a generic A10 kernel config file
* A20 now use generic_timer
* Add two new dts files for Olimex boards
* Update our custom DTS file for A10 and A20 to use the same compatible
property names as the vendor ones.
Submitted by: Emmanuel Vadot <manu@bidouilliste.com>
Differential Revision: https://reviews.freebsd.org/D4792
Prevent the function from null-pointer-dereference when unexisting
mapping is being processed.
Obtained from: Semihalf
Sponsored by: Cavium
Approved by: cognet (mentor)
Reviewed by: zbb, cognet
Differential revision: https://reviews.freebsd.org/D5228
16-byte value. With this the hardware will check if a memory access uses
an incorrectly aligned stack pointer as the base address.
Sponsored by: ABT Systems Ltd
number of physical memory locations we can access. This is the case on
some HiKey boards that may have UEFI reserved memory dispersed through the
physical space.
Sponsored by: ABT Systems Ltd
