long as I remember, and completely superseded by better maintained umass(4).
It's main idea was to optionally avoid CAM dependency for such devices, but
with move ATA to CAM, it is not actual any more.
No objections: hselasky@, thompsa@, arch@
represented a write access that is allowed to override write protection.
Until now, VM_PROT_OVERRIDE_WRITE has been used to write breakpoints into
text pages. Text pages are not just write protected but they are also
copy-on-write. VM_PROT_OVERRIDE_WRITE overrides the write protection on the
text page and triggers the replication of the page so that the breakpoint
will be written to a private copy. However, here is where things become
confused. It is the debugger, not the process being debugged that requires
write access to the copied page. Nonetheless, the copied page is being
mapped into the process with write access enabled. In other words, once the
debugger sets a breakpoint within a text page, the program can write to its
private copy of that text page. Whereas prior to setting the breakpoint, a
SIGSEGV would have occurred upon a write access. VM_PROT_COPY addresses
this problem. The combination of VM_PROT_READ and VM_PROT_COPY forces the
replication of a copy-on-write page even though the access is only for read.
Moreover, the replicated page is only mapped into the process with read
access, and not write access.
Reviewed by: kib
MFC after: 4 weeks
message has been printed is enough to get someones attention. Also remove the
line number for DPRINTF/DPRINTFN, it already prints the funtion name and a
unique message.
Check if large factor is prime before applying Pollard's algorithm;
fixes "factor 2147483647111311". Increase base if p-1 algorithm
reaches 1; fixes "factor 99999999999991".
Testcases from David A Bagley <bagleyd@tux.org>.
Fixes from Joseph Myers <jsm@NetBSD.org>.
Problem rediscovered by an attempt to factor my phone number.
A few other incidental fixes: correct a couple of factually incorrect
comments; use ident string macros; move from 4-clause to 3-clause
BSD licence (University of California copyright).
Obtained from: NetBSD
Main highlights:
(A) The new -B option compresses blank lines around a deleted section
so that blank lines around "paragraphs" of code don't get doubled.
(B) Lenient evaluation of && and || so that #if expressions can be
evaluated even when some of their sub-expressions cannot be.
(C) The evaluator can now handle macros with arguments.
(D) Portability fixes, especially for unifdefall.
Contributions from:
Ben Hutchings at Solarflare Communications (A and B)
Anders H Kaseorg <andersk@mit.edu> (A and C)
Jonathan Nieder <jrnieder@gmail.com> (D)
Obtained from: http://dotat.at/prog/unifdef/
specific sysctls and ptrace interfaces.
This change switches a bit gcore POLA that is summarized here:
- now gcore can recognize threads within the process and handle dumps
on thread-scope
- the process to be analyzed will be stopped during its gcore run
- gcore may not work with processes which are actively being analyzed
by gdb or truss
- the ptrace interface may cause syscalls to return EINTR, thus
interferring with signals handling within the process
Side note: <janitor task> the interface can be further lifted in order to
get rid of the very last procfs interfaces remnants and made more
suitable for copying with sysctl/ptrace interface </janitor task>.
Obtained from: Sandvine Incorporated
Reviewed by: emaste, rwatson
Sponsored by: Sandvine Incorporated
MFC: 1 month
environments.
Please note that this can't be done while such processes run in jails.
Note: in future it would be interesting to find a way to do that
selectively for any desired proccess (choosen by user himself), probabilly
via a ptrace interface or whatever.
Obtained from: Sandvine Incorporated
Reviewed by: emaste, arch@
Sponsored by: Sandvine Incorporated
MFC: 1 month
and moving the default initialization of prec into the else clause.
The clang static analyzer erroneously thought that nsec can be used
uninitialized here; it was not actually possible, but better to make
the code clearer. (Clang can't know that sprintf() won't modify *pi
behind the scenes.)
uninitialized. Initialize it to a safe value so that there's no
chance of returning an error if stack garbage happens to be equal to
(size_t)-1 or (size_t)-2.
Found by: Clang static analyzer
MFC after: 7 days
of the last tick we incremented on.
Submitted by: matthew.fleming/at/isilon.com, is/at/rambler-co.ru
Reviewed by: jeff (who thinks there should be a better way in the future)
Approved by: gnn (mentor)
MFC after: 3 weeks
- fix a system deadlock on process exit when the sample buffer
is full (pmclog_loop blocked in fo_write) and pmcstat exit.
Reviewed by: jkoshy
MFC after: 3 weeks
bits on seems to confuse hardware TX engine.
- For 350 chips, set TX desc's buffer physical address before turning on the
TX desc valid bit.
Submitted by: Jeremy O'Brien obrien654j | gmail, sephe
Obtained from: DragonFly BSD
- Extend XPT-SIM transfer settings control API. Now it allows to report to
SATA SIM number of tags supported by each device, implement ATA mode and
SATA revision negotiation for both SATA and PATA SIMs.
- Make ahci(4) and siis(4) to use submitted maximum tag number, when
scheduling requests. It allows to support NCQ on devices with lower tags
count then controller supports.
- Make PMP driver to report attached devices connection speeds.
- Implement ATA mode negotiation between user settings, device and
controller capabilities.
When PAGE_SIZE is 16K, MJUMPAGESIZE equals MJUM16BYTES and
causes build breakages.
For PAGE_SIZE < 2K, define MJUMPAGESIZE as MCLBYTES.
For PAGE_SIZE > 8K, define MJUMPAGESIZE as 8K.
Everywhere inbetween, define MJUMPAGESIZE as PAGE_SIZE.
Thus MCLBYTES <= MJUMPAGESIZE <= 8KB.
the kernel stack at all. The new USB stack simply caused a change
in timing that triggered a firmware bug more often. The addition
of PRINTF_BUFR_SIZE apparently triggered the same firmware bug
even more reliably.
But even with KSTACK_PAGES=5, one instance of the firmware bug
remained: booting with a CD inserted. This problem was run into
by accident after installing Debian and having to boot FreeBSD
to fixup the GPT partitioning (Thanks... not). After bumping
KSTACK_PAGES to 5, it was pretty unbelievable that the stack was
still being too small.
After updating the firmware we could boot with a CD inserted and
KSTACK_PAGES could be lowered back to 4 pages without problems.
Note: It is believed to be a timing related firmware bug, because
the machine check information showed access to the serial console
on one CPU and access to the EHCI HCD on the other CPU. Since
both are devices on the management unit and thus virtualized in
some way, any execution trace that does not include concurrent
access to the BMC from both CPUs is fine.
Note also that it's not understood exactly how increasing the
kernel stack avoided hitting the firmware bug. A change in page
faults does change timing, but it's not known if that's what's
happening here.
In any case: the problem is being monitored. Reverting back to
4 pages for the kernel stack is preferred, because it makes it
easier to switch to 16K pages (double the page size) without
wasting too much memory by not being able to half the number of
pages...
using VOP_LOOKUP() when VFS_VGET() returns EOPNOTSUPP in the
ReaddirPlus RPC. This patch is based upon one by pjd@ for the
regular nfs server which has not yet been committed. It is needed
when a ZFS volume is exported and ReaddirPlus (which almost
always happens for NFSv4) is performed by a client. The patch
also simplifies vnode lock handling somewhat.
MFC after: 2 weeks
This adds zfsloader which will be called by zfsboot/gptzfsboot code rather
than the tradional loader. This eliminates the need to set the
LOADER_ZFS_SUPPORT variable in order to get a ZFS enabled loader.
Note however, that you must reinstall your bootcode (zfsboot/gptzfsboot)
in order for the boot process to use the new loader.
New installations will no longer be required to build a ZFS enabled
loader for a working ZFS boot system. Installing zfsboot/gptzfsboot is
sufficient for acknowledging the use of CDDL code and therefore the ZFS
enabled loader.
Based on a previous patch from jhb@
Reviewed by: jhb@
MFC after: 2 weeks
