threads. This is quite useful if generating a debug log for post-mortem
by another developer, in which case the person at the console may not
know which threads are of interest. The output of this can be quite
long.
Discussed with: kris
MFC after: 3 days
This is a special case because tcp_twstart() destroys a tcp control
block via tcp_discardcb() so we cannot call tcp_drop(struct *tcpcb) on
such connections. Use tcp_twclose() instead.
MFC after: 5 days
- WEP TX fix:
The original code called software crypto, ieee80211_crypto_encap(),
which never worked since IEEE80211_KEY_SWCRYPT was never flagged due to
ieee80211_crypto_newkey() assumes that wi always supports hardware based
crypto regardless of operational mode(by virtue of IEEE80211_C_WEP).
This fix works around that issue by adding wi_key_alloc() to force
the use of s/w crypto. Also if anyone ever decides to cleanup ioctl
handling where key changes wouldn't cause a call to wi_init() every time,
we'll need wi_key_alloc() to DTRT.
In addition to that, this fix also adds code to wi_write_wep() to force
existing keys to be switched between h/w and s/w crypto such that an
operation mode change(sta <-> hostap) will flag IEEE80211_KEY_SWCRYPT
properly.
- WEP RX fix:
Clear IEEE80211_F_DROPUNENC even in hostap mode. Quote from Sam:
"This is really gross but I don't see an easy way around it.
By doing it we lose the ability to independently drop unencode
frames (and support mixed wep/!wep use). We should really be
setting the EXCLUDE_UNENCRYPTED flag written in wi_write_wep
based on IEEE80211_F_DROPUNENC but with our clearing it we can't
depend on it being set properly."
Reported by: Holm Tiffe <holm at freibergnet dot de>
Submitted by: sam
MFC after: 3 days
a list of possible keywords, not all them in a single argument.
This also fixes the issue of extra delimiter characters appearing
on the help line from rc.d scripts not setting $extra_commands.
- Remove description of poll in trap feature.
- Tell that polling should be turned on and off with ifconfig.
- Move description of kern.polling.enable to the end and say
that this a deprecated way of turning polling on.
- Remove note that idle poll has some problems in CURRENT. I failed
to find them, while Sam and Luigi failed to remember what the
problem actually were there.
o Axe poll in trap.
o Axe IFF_POLLING flag from if_flags.
o Rework revision 1.21 (Giant removal), in such a way that
poll_mtx is not dropped during call to polling handler.
This fixes problem with idle polling.
o Make registration and deregistration from polling in a
functional way, insted of next tick/interrupt.
o Obsolete kern.polling.enable. Polling is turned on/off
with ifconfig.
Detailed kern_poll.c changes:
- Remove polling handler flags, introduced in 1.21. The are not
needed now.
- Forget and do not check if_flags, if_capenable and if_drv_flags.
- Call all registered polling handlers unconditionally.
- Do not drop poll_mtx, when entering polling handlers.
- In ether_poll() NET_LOCK_GIANT prior to locking poll_mtx.
- In netisr_poll() axe the block, where polling code asks drivers
to unregister.
- In netisr_poll() and ether_poll() do polling always, if any
handlers are present.
- In ether_poll_[de]register() remove a lot of error hiding code. Assert
that arguments are correct, instead.
- In ether_poll_[de]register() use standard return values in case of
error or success.
- Introduce poll_switch() that is a sysctl handler for kern.polling.enable.
poll_switch() goes through interface list and enabled/disables polling.
A message that kern.polling.enable is deprecated is printed.
Detailed driver changes:
- On attach driver announces IFCAP_POLLING in if_capabilities, but
not in if_capenable.
- On detach driver calls ether_poll_deregister() if polling is enabled.
- In polling handler driver obtains its lock and checks IFF_DRV_RUNNING
flag. If there is no, then unlocks and returns.
- In ioctl handler driver checks for IFCAP_POLLING flag requested to
be set or cleared. Driver first calls ether_poll_[de]register(), then
obtains driver lock and [dis/en]ables interrupts.
- In interrupt handler driver checks IFCAP_POLLING flag in if_capenable.
If present, then returns.This is important to protect from spurious
interrupts.
Reviewed by: ru, sam, jhb
to avoid touching pageable memory while holding a mutex.
Simplify argument list replacement logic.
PR: kern/84935
Submitted by: "Antoine Pelisse" apelisse AT gmail.com (in a different form)
MFC after: 3 days
file cannot be linked into place when requested (not required) to do it,
reassure them that cpio is still intelligent enough that it will perform
a full copy instead.
sys/fs/nwfs/nwfs_vfsop= s.c, introduced with the conversion to
nmount with revision 1.38. This causes mount_nwfs to fail with
the error message:
mount_nwfs: mount error: /mnt/netware: syserr = No such file or directo=
ry
This is caused by a typo on line 178, which specifies "nwfw_args"
rather than "nwfs_args".
Submitted by: Antony Mawer <gnats@mawer.org>
Fat fingers: phk
PR: 86757
MFC: 3 days
up. This make iostat report operations passed down to the device driver
instead of operations passed down to GEOM disk. The transfer size limit
imposed by the device driver is no longer hidden, improving the correlation
between iostat output and device driver workload.
Split commands into two groups: one with optional count and one with
required argument. Changed synopsis line accordingly.
Added some hopefully-helpful comments based on experiments, knowing
that not all hardware works the same.
PR: docs/84101
Approved by: keramida
MFC after: 3 days
> Cause all flags passed by boot2 to set the respective loader(8)
> boot_* variable. The end effect is that all flags from boot2
> are now passed to the kernel.