Commit Graph

61284 Commits

Author SHA1 Message Date
John Baldwin
f565449541 Allow the clock lock to recurse. 2001-06-25 23:56:56 +00:00
John Baldwin
eaa942ebbd - Grab the vm lock around all of pmap_emulate_reference() as it manipulates
vm_page_t's.
- Add a KTR_TRAP tracepoint to trap() on the alpha that displays the
  contents of a0, a1, and a2 to make debugging of nested traps that
  panic before displaying any useful output easier.
2001-06-25 23:52:25 +00:00
John Baldwin
b7e554f5d6 - Move the 'clk' spinlock below other spin locks since KTR trace events
may need the clock lock for nanotime().
- Add KTR trace events for lock list manipulations and other witness
  operations.
- Use a temporary variable instead of setting the lock list head directly
  and then setting up the links to add a new lock list entry to the lock
  list.  This small race could result in witness "forgetting" about all
  the locks held by this process temporarily during an interrupt.
- Close a more fatal race condition when removing a lock from a list.
  Removing a lock from the list entails both decrementing the count of
  items in this bucket as well as shuffling items in the current bucket up
  a notch to replace the gap left by the removed item.  Wrap these
  operations in a critical section.
2001-06-25 23:17:52 +00:00
John Baldwin
1715f07da3 - Replace the unused KTR_IDLELOOP trace class with a new KTR_WITNESS trace
class to trace witness events.
- Make the ktr_cpu field of ktr_entry be a standard field rather than one
  present only in the KTR_EXTEND case.
- Move the default definition of KTR_ENTRIES from sys/ktr.h to
  kern/kern_ktr.c.  It has not been needed in the header file since KTR
  was un-inlined.
- Minor include cleanup in kern/kern_ktr.c.
- Fiddle with the ktr_cpumask in ktr_tracepoint() to disable KTR events
  on the current CPU while we are processing an event.
- Set the current CPU inside of the critical section to ensure we don't
  migrate CPU's after the critical section but before we set the CPU.
2001-06-25 23:09:31 +00:00
Brooks Davis
6ad3e220f2 Add support for the Cisco Aironet 350 Series of adaptors. Also, make
a minor ocrrection to the Aironet 340 Series comment.

Approved by:	imp (in principle)
2001-06-25 22:07:19 +00:00
Mike Smith
dbe8e37bbf Admit the shameful truth; I'm really from the east coast. But I left
shortly after I was born.  Honest!
2001-06-25 21:37:43 +00:00
Dima Dorfman
461ce74ab4 Silence -Wshadow and -Wmissing-prototypes; set WARNS=2.
Submitted by:	 Mike Barcroft <mike@q9media.com>
2001-06-25 21:25:27 +00:00
Dima Dorfman
789784547f ANSIize, staticize, and unsignedize; set WARNS=2.
Submitted by:	Mike Barcroft <mike@q9media.com>
2001-06-25 21:12:52 +00:00
Andrey A. Chernov
b15d61cf16 Rewrite locale handling using nl_langinfo(CODESET), so aliases not needed here
now
2001-06-25 21:11:43 +00:00
Dima Dorfman
0cbc94d0e8 Constify and set WARNS=2.
Submitted by:	Mike Barcroft <mike@q9media.com
Reviewed by:	md5(1)
2001-06-25 21:06:15 +00:00
Brian Somers
4a824adfc0 What to do when :w tells you you haven't got permission. 2001-06-25 21:05:55 +00:00
Andrey A. Chernov
d118fd8a39 Return "" if reallocf() fails 2001-06-25 20:56:59 +00:00
Andrey A. Chernov
ecffe71379 Describe success return value 2001-06-25 20:50:06 +00:00
Brian Somers
b363588c62 Mention that sh supports command line editing 2001-06-25 20:45:52 +00:00
Brian Somers
3579379c2d Mention that vi supports split-screen mode. 2001-06-25 20:44:03 +00:00
Brian Somers
5fc478617d Suggest using .login/.profile to set environment variables, not
.cshrc/.bashrc/.zshrc/.shrc
2001-06-25 20:41:42 +00:00
Nik Clayton
9f1f5e8d53 Automatically exec bash at startup if it exists^U Turn on the display of
tips from the freebsd-tips database at login time.
2001-06-25 20:40:02 +00:00
George C A Reid
efe4cd6a18 Add an acceleration option to moused
PR:		28369
Submitted by:	Daniel O'Connor <darius@dons.net.au>
manpage reviewed by:	ru
MFC after:	10 days
2001-06-25 20:15:34 +00:00
John Baldwin
1d79f1bb9a - Sort includes.
- Count the context switches during shutdown when we give ithreads a chance
  to run as volutary context switches.

Submitted by:	bde (2)
2001-06-25 18:30:42 +00:00
John Baldwin
c4f7a18726 Count the context switch when blocking on a mutex as a voluntary context
switch.  Count the context switch when preempting the current thread to let
a higher priority thread blocked on a mutex we just released run as an
involuntary context switch.

Reported by:	bde
2001-06-25 18:29:32 +00:00
John Baldwin
84bbc4dbda Count the switch when an ithread goes idle as a voluntary context switch.
Submitted by:	bde
2001-06-25 18:27:33 +00:00
John Baldwin
277be4c219 We don't need the vm lock to perform a few simple calculations on the
md device's softc.
2001-06-25 18:24:52 +00:00
John Baldwin
5ae10ded6e Fix cut-n-paste brain-o.
Pointy-hat to:	me
2001-06-25 16:38:09 +00:00
Doug Rabson
b5da4ce935 Add code to detect Transmeta Crusoe cpus. 2001-06-25 15:11:33 +00:00
Ruslan Ermilov
845b45fed4 Submitted by: andreas 2001-06-25 09:11:45 +00:00
Andrey A. Chernov
4e86aa7f9d Add transition period hack allowing old locale names return proper codeset too 2001-06-25 09:03:10 +00:00
Ruslan Ermilov
085d234587 Only checksum stdin if nothing has been checksummed yet.
PR:		bin/28386
2001-06-25 08:52:57 +00:00
Dima Dorfman
7a507517de Previous commit broke dd(1)'s I/O summary when it's terminated by a
signal.  Fix it by adding an explicit call to summary() in terminate()
(it was previously called implicitly by exit() because summary() was
registered with atexit()).  summary() is supposed to be signal-safe--
it handles SIGINFO almost exclusively--so this should be safe.

Submitted by:	bde
2001-06-25 06:17:02 +00:00
Mike Smith
15fd5d220f Driver modifications consistent with my other drivers to facilitate
the use of a single set of sources across 4.x and 5.x branches.

No significant code changes.
2001-06-25 04:32:31 +00:00
Warner Losh
9ae6dc2e12 Work around a bug in the current interrupt system by explicitly
rejecting INTR_FAST interrupts.  Since they can't be shared anyway,
this just short circuits a failure case that should work but is panic
fodder now.

This bug is that if the interrut condiation is active when you activate
the interrupt, then the interrupt routine will be called.  jhb had
a patch that may or may not work to fix it, but I've lost it.

This may be due to the sio probe doing something odd too.
2001-06-25 04:13:54 +00:00
Garance A Drosehn
004c9c5da2 Make 'lpc clean' somewhat safer. Add an 'lpc tclean' command, which allows
one to see what files would be removed *if* an 'lpc clean' is done.  'tclean'
will remove no files, and is therefore not a privileged command.  Also, both
'lpc clean' and 'lpc tclean' will now look for 'core' files in spool directories
(but not remove them).  They also print out an extra line of info when a
datafile to be removed is a symlink (from 'lpr -s'), saying what file it is
a symlink to.

The 'lpc clean' commands also now print out a summary line saying how many
queues were checked, how many files were removed (or "would be" removed, for
tclean), and how much disk space is involved.  For the benefit of those who
have many print queues, 'lpc clean all' will only print out the names of print
queues where some "interesting" files were found, instead of printing out a
header-line for every queue in your printcap file.

Reviewed by:	freebsd-print@bostonradio.org  freebsd-audit@FreeBSD.org
MFC after:	2 weeks
2001-06-25 02:05:03 +00:00
Garance A Drosehn
6ddb63cad6 Add two new options for lpd: -c will log all connection-errors to syslog,
while -w allows connection from non-reserved ports.  Also improves the
helpfulness of various connection-error messages.

The changes for IPv6 added back in the reserved-port check which was mistakenly
dropped from lpd in 1997 (copying a change from openbsd).  It is best to have
that check in place, but the check breaks lpr's from some implementations of
lpr/lpd for Windows.  The -w option is for those admins who need to accept
jobs from non-reserved ports, the -c option is for admins who would like a
print-server machine to log all failed connection-attempts to syslog.

Reviewed by:	freebsd-audit@FreeBSD.org  freebsd-print@bostonradio.org
MFC after:	2 weeks
2001-06-25 01:45:25 +00:00
Dima Dorfman
2b47b55f69 Add RETURN VALUES and ERRORS sections. 2001-06-25 01:25:01 +00:00
Dima Dorfman
53950232dd Minor cleanup: sort includes, fix name. 2001-06-25 01:21:13 +00:00
Jordan K. Hubbard
d067d730b9 Fix crypto targets to be user-overridable and also obey the
NO_SENDMAIL flag if set.  The whole NO_FOO mechanism in /usr/src
is pretty bogus and needs to be re-examined in the context of a
larger argument about modularity, but that's something for another
time.

Submitted by:		Peter Pentchev <roam@orbitel.bg>
2001-06-25 00:43:10 +00:00
Dima Dorfman
727b8ed309 Xref to extattr(2) and extattr(3). 2001-06-24 23:59:22 +00:00
Dima Dorfman
ce1e308f7a Add a link to extattr.2 (from extattr_get_file.2). The other names
are too specific and too long, and extattr.2 makes a nice point of
reference for "extattr-related syscalls".
2001-06-24 23:58:27 +00:00
Dima Dorfman
444a2d61e8 Add a manual page for extattr_string_to_namespace and
extattr_namespace_to_string.

Reviewed by:	rwatson
2001-06-24 23:54:46 +00:00
Dima Dorfman
7309915e7a Nuke unused variables. 2001-06-24 23:41:57 +00:00
Jun Kuriyama
8194b338dc Merge from ipfw.8 (1.57).
o Sync with netinet6/ip6_fw.c (1.12).

MFC after:	10 days
2001-06-24 23:40:09 +00:00
Dima Dorfman
384d80b3b9 Nuke unused variables. 2001-06-24 23:31:07 +00:00
Dima Dorfman
a8b81a75df Include missing header files whicih define functions for which gcc has
builtints (e.g., exit, strcmp).
2001-06-24 23:25:59 +00:00
Dima Dorfman
9582ea7e62 Include missing header files which define functions for which gcc has
builtints (e.g., exit, strcmp).
2001-06-24 23:22:14 +00:00
Dima Dorfman
cafefe8c1b Include missing header files which define functions for which gcc has
builtins (e.g., exit, strcmp).
2001-06-24 23:04:23 +00:00
Jun Kuriyama
6ce2587d28 Merge from netinet/ip_fw.c (1.117 -> 1.118).
o Use syslog(3) interface for logging.

Reviewed by:	ume
MFC after:	10 days
2001-06-24 22:41:00 +00:00
Dima Dorfman
b5bf845d5d Xref extattr_set_file(2). 2001-06-24 21:14:46 +00:00
Dima Dorfman
3627fb0997 Xref extattr_get_file(2). 2001-06-24 21:13:58 +00:00
Dima Dorfman
cfbcaeda78 Add a namespace argument to one of the examples. 2001-06-24 21:13:01 +00:00
Dima Dorfman
44fe68c421 mdoc(7) police: the BUGS section should go after HISTORY and AUTHORS. 2001-06-24 20:58:20 +00:00
Dima Dorfman
17011fc056 The fact that phk wrote this is not a bug! 2001-06-24 20:56:39 +00:00