Commit Graph

189443 Commits

Author SHA1 Message Date
Scott Long
f6f851a37b Document the -a option that was added in r262424.
Obtained from:	Netflix, Inc.
MFC after:	3 days
2014-04-29 07:17:33 +00:00
Bryan Drewery
74679c6a99 Remove redundant include
MFC after:	3 days
2014-04-29 01:17:43 +00:00
Warner Losh
52cb8b8fe1 Add dependency for libm to libstdc++. This fixes high -j value builds
when not building with clang.

Submitted by: ian@
2014-04-28 23:16:46 +00:00
Neel Natu
f0fdcfe247 Allow a virtual machine to be forcibly reset or powered off. This is done
by adding an argument to the VM_SUSPEND ioctl that specifies how the virtual
machine should be suspended, viz. VM_SUSPEND_RESET or VM_SUSPEND_POWEROFF.

The disposition of VM_SUSPEND is also made available to the exit handler
via the 'u.suspended' member of 'struct vm_exit'.

This capability is exposed via the '--force-reset' and '--force-poweroff'
arguments to /usr/sbin/bhyvectl.

Discussed with:	grehan@
2014-04-28 22:06:40 +00:00
Glen Barber
70b7e330c6 Remove note about hw.bus.devctl_disable removal, restored
in r265060.

Sponsored by:	The FreeBSD Foundation
2014-04-28 20:40:36 +00:00
Brooks Davis
a3fe2bc59e Revert r263754, re-adding support for hw.bus.devctl_disable. Breaking
old devd's and thus hosts that get IP addresses from DHCP was too much
of a POLA violation.

The sysctl may be removed again after r263758 has been merged to at
least stable/9 and stable/10, and releases have been cut from those
branches.

Discussed with:	mjg
Reported by:	theraven, rwatson
2014-04-28 20:38:08 +00:00
Andrew Turner
8258fd68ef Set the new floating point exception mask correctly
Submitted by:	Keith White <kwhite@site.uottawa.ca>
2014-04-28 18:54:12 +00:00
Peter Grehan
67e1705297 Implement legacy interrupts for the AHCI device emulation
according to the method outlined in the AHCI spec.

Tested with FreeBSD 9/10/11 with MSI disabled,
and also NetBSD/amd64 (lightly).

Reviewed by:	neel, tychon
MFC after:	3 weeks
2014-04-28 18:41:25 +00:00
Nathan Whitehorn
4424e30878 Turn off various fancy instruction sets, as well as deduplicate some options.
This makes the EFI loader build work with CPUTYPE=native in make.conf on
my Core i5.
2014-04-28 18:25:21 +00:00
Marcel Moolenaar
0c2b180a35 Add a C libary and a Python module that implements an API similar
to bus_space(9) and that uses the proto(4) driver for talking to
hardware. If the I/O resource is a memory mapped I/O resource,
then mmap(2) will be attempted to avoid read(2)/write(2) overhead.

Sponsored by:	Juniper Networks, Inc.
2014-04-28 18:06:11 +00:00
Marcel Moolenaar
67fb10f30c Add proto(4): A driver for prototyping and diagnostics.
It exposes I/O resources to user space, so that programs can peek
and poke at the hardware. It does not itself have knowledge about
the hardware device it attaches to.

Sponsored by:	Juniper Networks, Inc.
2014-04-28 17:58:40 +00:00
Alexander Motin
dea1e22600 Reduce number of opens by REOM RAID during provider taste.
Instead opening/closing provider by each of metadata classes, do it only
once in core code.  Since for SCSI disks open/close means sending some
SCSI commands to the device, this change reduces taste time.

MFC after:	2 weeks
Sponsored by:	iXsystems, Inc.
2014-04-28 15:03:52 +00:00
Ed Maste
bd92124545 Drop explicit unsigned from FD_SETSIZE constant
FD_SETSIZE is often used as an argument to select or compared with an
integer file descriptor.  Rather than force 3rd party software to add
explicit casts, just make it a plain (int) constant as on other
operating systems.

Previous discussion:
http://lists.freebsd.org/pipermail/freebsd-standards/2012-July/002410.html
2014-04-28 13:42:41 +00:00
Steven Hartland
101dfa0ed4 Fix ZIO reordering done by vdev_queue_io causing panics when zio_vdev_io_start
returns ZIO_PIPELINE_CONTINUE from vdev_op_io_start to zio_execute resulting
in the wrong ZIO continuing its pipeline.

This is a serious issue which could cause data loss / corruption but appears
to be limited to error handling such as when vdev_readable(vd) returns false.

MFC after:	2 days
2014-04-28 09:00:00 +00:00
Eitan Adler
b2ba559513 bsd-family-tree: Fix date 2014-04-28 06:24:37 +00:00
Ganbold Tsagaankhuu
5372fec0bc Move common device tree informations to separate dtsi files for A10 and A20 SoC.
Change cubieboard1 and cubieboard2 dts files accordingly.

Approved by:	stas (mentor)
2014-04-28 05:39:20 +00:00
Ian Lepore
440fe55df6 Don't use multiprocessing-extensions instruction on processors that don't
support SMP.

Submitted by:	loos@
Pointy hat to:	me
2014-04-28 02:35:28 +00:00
Ian Lepore
88b3694bd9 Move duplicated code to print l2 cache config into the common code. 2014-04-27 23:47:38 +00:00
Adrian Chadd
17102f802f Note that the AR9380 and later hardware supports MYBEACON.
(Yes, I said AR5416 in the committed code.  It's still strictly true.)
2014-04-27 23:37:39 +00:00
Adrian Chadd
a4e6347b86 Note that the AR5416 and later hardware supports the MYBEACON RX filter. 2014-04-27 23:37:03 +00:00
Adrian Chadd
dd7b232e39 * Add a new capability which returns whether the hardware supports
the MYBEACON RX filter (only receive beacons which match the BSSID)
  or all beacons on the current channel.

* Add the relevant RX filter entry for MYBEACON.

Tested:

* AR5416, STA
* AR9285, STA

TODO:

* once the code is in -HEAD, just make sure that the code which uses it
  correctly sets BEACON for pre-AR5416 chips.

Obtained from:	QCA, Linux ath9k
2014-04-27 23:36:44 +00:00
Adrian Chadd
ee6325ab56 Program the AR_TSFOOR_THRESHOLD register with a default lifted from
the QCA HAL.

This fires off an interrupt if the TSF from the AP / IBSS peer is
wildly out of range.  I'll add some code to the ath(4) driver soon
which makes use of this.

TODO:

* verify this didn't break TDMA!
2014-04-27 23:35:05 +00:00
Adrian Chadd
3e9b8fe01b Fix the AR_SLEEP1 and AR_SLEEP2 definitions. Oops!
Tested:

* AR9285, STA
* AR5416, STA

Obtained from:	QCA, Linux ath9k
2014-04-27 23:33:37 +00:00
Adrian Chadd
552c550628 Do a read-after-write to ensure the interrupt register update is flushed
to the hardware.

The QCA HAL has a comment noting that if this isn't done, modifications
to AR_IMR_S2 before AR_IMR is flushed may produce spurious interrupts.

Obtained from:	QCA
2014-04-27 23:31:42 +00:00
Devin Teske
9febee763b Disable the beastie menu for EFI console which doesn't support ANSI codes
(so things like `at-xy', `clear', and other commands don't work making it
impossible to generate a living menu).

Reviewed by:	nwhitehorn, emaste
2014-04-27 22:18:33 +00:00
Alexander V. Chernikov
de46b2c650 Fix build
Found by:	ian
Pointyhat to:	me
2014-04-27 21:17:54 +00:00
Nathan Whitehorn
43336b6385 No EFI on i386. This unbreaks the i386 VT kernel build. 2014-04-27 20:36:19 +00:00
Ian Lepore
f62cbe0e49 Explain why wbinv_all is SMP-safe in this case, and add a missing l2 cache
flush.  (Either it was missing here, or it isn't needed in the minidump
case.  Adding it here seems like the safer path to consistancy.)
2014-04-27 20:26:15 +00:00
Ian Lepore
fa046341af Flush and invalidate caches on each CPU as part of handling IPI_STOP.
Flushing the caches is required before doing a panic dump, but ARM
doesn't provide a flavor of flush that gets broadcast to other cores.
However, all cores except one are stopped before doing a dump, so this
works around the lack of a global flush/invalidate by doing it locally
on each CPU as part of stopping.

Discussed with:	cognet@
2014-04-27 20:16:51 +00:00
Ian Lepore
824e4131a0 There is no difference between IPI_STOP and IPI_STOP_HARD on ARM, so
map them both to the same interrupt number like other arches do.
2014-04-27 20:01:59 +00:00
Ian Lepore
edecf7f6c1 Remove cpu_idcache_wbinv_all() from kdb_cpu_trap(), it's no longer needed.
This was added ca. 2004 for the purpose of ensuring the caches were in the
right state after the debugger set a breakpoint.  kdb_cpu_sync_icache()
was added in 2007 to handle that situation, and now the wbinv_all is
actually harmful because the operation isn't broadcast to other cores.
2014-04-27 18:12:55 +00:00
Alexander V. Chernikov
f2e5eb368a Improve memory allocation model for rt_msg2() rtsock messages:
* memory is now allocated as early as possible, without holding locks.
 * sysctl users are now guaranteed to get a response (M_WAITOK buffer prealloc).
 * socket users are more likely to use on-stack buffer for replies.
 * standard kernel malloc/free functions are now used instead of radix wrappers.
rt_msg2() has been renamed to rtsock_msg_buffer().

MFC after:	1 month
2014-04-27 17:41:18 +00:00
Glen Barber
73e46dba11 Turn off the full witness trace on console output.
On head/, or more specifically, when WITNESS is in
the kernel config, the console is spammed excessively
with lock order reversal between isofs and devfs.

Set debug.witness.trace=0 in the installer sysctl.conf
to avoid printing the full KDB stack backtrace.  This
does not prevent printing the lock order reversal has
happened, only lessens the console spam.

Sponsored by:	The FreeBSD Foundation
2014-04-27 16:40:40 +00:00
Nathan Whitehorn
faecd0da18 loader's GPT support on BIOS does not seem to like the root filesystem
being the last filesystem on the disk for some reason when made by this
script. Add a vestigial swap partition to allow this to boot with QEMU
BIOS.
2014-04-27 16:34:59 +00:00
Nathan Whitehorn
235591a578 Finish connecting up installer UEFI support. If the kernel was booted using
EFI, set up the disks for an EFI system. If booted from BIOS/CSM, set up
for BIOS.
2014-04-27 15:58:07 +00:00
Hans Petter Selasky
8237c62b5d Setting the IMOD value below 0x3F8 can cause IRQ lockups in the Intel
LynxPoint USB 3.0 controllers found in MacBookPro 2013's.

MFC after:	2 days
Tested by:	Huang Wen Hui <huanghwh@gmail.com>
2014-04-27 15:41:44 +00:00
Ed Maste
b6a0a32b58 Report boot method (BIOS/UEFI) via sysctl machdep.bootmethod
Sponsored by:	The FreeBSD Foundation
2014-04-27 15:14:59 +00:00
Luiz Otavio O Souza
8376edae84 Revert r258678. Make the led gpio-specifier match again the #gpio-cells
settings from the GPIO controller, which i had broken in r258678.  Restore
the active-low flag.
2014-04-27 13:10:51 +00:00
Luiz Otavio O Souza
628a40b5c4 Fix the gpio-specifier decoding by respecting the GPIO controller's
#gpio-cells property.

Add a new ofw_bus method (OFW_BUS_MAP_GPIOS()) that allows the GPIO
controller to implement its own mapping to deal with gpio-specifiers,
allowing the decoding of gpio-specifiers to be controller specific.

The default ofw_bus_map_gpios() decodes the linux standard (#gpio-cells =
<2>) and the FreeBSD standard (#gpio-cells = <3>).

It pass the gpio-specifier flag field to the children as an ivar variable so
they can act upon.
2014-04-27 12:11:00 +00:00
Alexander V. Chernikov
f1fcb55271 Remove useless zeroing of RTAX_DST on error.
Cleanup a bit.

MFC after:	1 month
2014-04-27 10:43:48 +00:00
Alexander V. Chernikov
92c227af54 Cleanup route_output() a bit.
MFC after:	1 month
2014-04-27 10:20:37 +00:00
Alexander V. Chernikov
2277c5e5e2 Do not delay freeing rtm. Bandaid added in r227061 is not needed since r227061,
MFC after:	1 month
2014-04-27 09:49:35 +00:00
Konstantin Belousov
dc74dde71e Same as it was done in r263878 for invlrng_handler(), fix order of
checks for special pcid values in invlpg_pcid_handler().  Forst check
for special values, and only then do PCID-specific page invalidation.

Minor fix to the style compliance, declare local variable at the
function start.

Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-04-27 05:37:01 +00:00
Konstantin Belousov
a9e285b047 Fix order of libthr and libc in the global dso list for sshd, by
explicitely linking main binary with -lpthread.  Before, libthr
appeared in the list due to dependency of one of the kerberos libs.
Due to the change in ld(1) behaviour of not copying NEEDED entries
from direct dependencies into the link results, the order becomes
reversed.

The libthr must appear before libc to properly interpose libc symbols
and provide working rtld locks implementation.  The symptom was sshd
hanging on rtld bind lock during nested symbol binding from a signal
handler.

Approved by:	des (openssh maintainer)
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-04-27 05:28:14 +00:00
Konstantin Belousov
4c74acf76a When vm_fault_copy_entry() is called from vm_map_protect() for a wired
entry and performs the upgrade of the entry permissions from read-only
to read-write, we must allow to search for the source pages in the
backing object, like we do in the case of forking the read-only wired
entry. For the fork case, the behaviour is allowed by src_readonly
boolean, which in fact is only used to assert that read-write case
provides all source pages in the top-level object.

Eliminate the src_readonly variable.  Allow for the copy loop to look
into the backing objects, add explicit asserts to ensure that only
read-only and upgrade case actually does.

Expand comments. Change the panic call into assert.

Reported by:	markj
Tested by:	markj, pho (previous version)
Reviewed by:	alc
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
2014-04-27 05:19:01 +00:00
Nathan Whitehorn
bacc56cc08 Don't need this now. VT does the same thing, but better.
Submitted by:	gjb
2014-04-27 02:28:32 +00:00
Nathan Whitehorn
8bcbebe741 Add vt_efifb to VT kernel configuration now that that actually works. This
kernel will now boot on both BIOS and EFI systems without modification.
Equivalent functionality in GENERIC requires making vt(9) the default console
driver, which is probably appropriate at this point.
2014-04-27 02:22:21 +00:00
Nathan Whitehorn
b2d52f78cf Increase the maximum framebuffer size to more reasonable values reflecting
the high-resolution boot consoles present on Open Firmware and EFI systems.
2014-04-27 02:20:51 +00:00
Alexander V. Chernikov
f5d9a6964d Move up fibnum to ensure it is always defined.
Found by:	ian
MFC with:	r264987
2014-04-27 02:20:09 +00:00
Nathan Whitehorn
7ff9cf1d06 Disable vga if EFI framebuffer present. vt(9) should handle this internally
based on efifb's higher priority, but it doesn't, and this at least lets
us build a kernel that boots on both BIOS and EFI systems for now.
2014-04-27 02:19:53 +00:00