from the FreeBSD network code. The flag is still kept around in the
"sys/mbuf.h" header file, but does no longer have any users. Instead
the "m_pkthdr.rsstype" field in the mbuf structure is now used to
decide the meaning of the "m_pkthdr.flowid" field. To modify the
"m_pkthdr.rsstype" field please use the existing "M_HASHTYPE_XXX"
macros as defined in the "sys/mbuf.h" header file.
This patch introduces new behaviour in the transmit direction.
Previously network drivers checked if "M_FLOWID" was set in "m_flags"
before using the "m_pkthdr.flowid" field. This check has now now been
replaced by checking if "M_HASHTYPE_GET(m)" is different from
"M_HASHTYPE_NONE". In the future more hashtypes will be added, for
example hashtypes for hardware dedicated flows.
"M_HASHTYPE_OPAQUE" indicates that the "m_pkthdr.flowid" value is
valid and has no particular type. This change removes the need for an
"if" statement in TCP transmit code checking for the presence of a
valid flowid value. The "if" statement mentioned above is now a direct
variable assignment which is then later checked by the respective
network drivers like before.
Additional notes:
- The SCTP code changes will be committed as a separate patch.
- Removal of the "M_FLOWID" flag will also be done separately.
- The FreeBSD version has been bumped.
MFC after: 1 month
Sponsored by: Mellanox Technologies
tested and is unfinished. However, I've tested my version,
it works okay. As before it is unfinished: timeout aren't
driven by TCP session state. To enable the HASH_ALL mode,
one needs in kernel config:
options FLOWTABLE_HASH_ALL
o Reduce the alignment on flentry to 64 bytes. Without
the FLOWTABLE_HASH_ALL option, twice less memory would
be consumed by flows.
o API to ip_output()/ip6_output() got even more thin: 1 liner.
o Remove unused unions. Simply use fle->f_key[].
o Merge all IPv4 code into flowtable_lookup_ipv4(), and do same
flowtable_lookup_ipv6(). Stop copying data to on stack
sockaddr structures, simply use key[] on stack.
o Move code from flowtable_lookup_common() that actually works
on insertion into flowtable_insert().
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
insert flow entry. During the route lookup the critical section is
exited. It may happen, that after route lookup we will be executed
on an other CPU that already has such flowentry. Before this change
we simply freed the flowentry and returned to ip_output() with
failure.
Actually there is nothing wrong with using previously allocated
flow entry, updating it properly. Thus, make flowentry_insert()
return the new either old fle, and make use of it.
Count reuses as "collisions" and real inserts as "inserts".
Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
Some of the collisions that are occuring are due to flowtable lookups
that succeed but have an invalid lle - typically because the L2 adjacency
lookup hasn't completed. This would lead to a follow-up insert which
would then fail (ie, collision) and the code would fall through to doing
a slow-path L2/L3 lookup in the netinet/netinet6 code.
This patch simply aborts storing a new flowtable entry if the lle isn't
yet valid.
Whilst I'm here, add a new pcpu counter for the item so the number of
failures can be tracked separately from generic "collisions."
Reviewed by: glebius
MFC after: 10 days
Sponsored by: Netflix, Inc.
and probably is a leftover from first prototyping by Kip. The
non-pcpu implementation used mutexes, so it doubtfully worked
better than simple routing lookup.
o Use UMA_ZONE_PCPU zone for pointers instead of [MAXCPU] arrays,
use zpcpu_get() to access data in there.
o Substitute own single list implementation with SLIST(). This
has two functional side effects:
- new flows go into head of a list, before they went to tail.
- a bug when incorrect flow was deleted in flow cleaner is
fixed.
o Due to cache line alignment, there is no reason to keep
different zones for IPv4 and IPv6 flows. Both consume one
cache line, real size of allocation is equal.
o Rely on that f_hash, f_rt, f_lle are stable during fle
lifetime, remove useless volatile quilifiers.
o More INET/INET6 splitting.
Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- ip_output() and ip_output6() simply call flowtable_lookup(),
passing mbuf and address family. That's the only code under
#ifdef FLOWTABLE in the protocols code now.
o Revamp statistics gathering and export.
- Remove hand made pcpu stats, and utilize counter(9).
- Snapshot of statistics is available via 'netstat -rs'.
- All sysctls are moved into net.flowtable namespace, since
spreading them over net.inet isn't correct.
o Properly separate at compile time INET and INET6 parts.
o General cleanup.
- Remove chain of multiple flowtables. We simply have one for
IPv4 and one for IPv6.
- Flowtables are allocated in flowtable.c, symbols are static.
- With proper argument to SYSINIT() we no longer need flowtable_ready.
- Hash salt doesn't need to be per-VNET.
- Removed rudimentary debugging, which use quite useless in dtrace era.
The runtime behavior of flowtable shouldn't be changed by this commit.
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
- Provide missing function that can do hashing of arbitrary sized buffer.
- Refetch lookup3.c and do only minimal edits to it, so that diff between
our jenkins_hash.c and lookup3.c is minimal.
- Add declarations for jenkins_hash(), jenkins_hash32() to sys/hash.h.
- Document these functions in hash(9)
Obtained from: http://burtleburtle.net/bob/c/lookup3.c
it skips FLOWTABLE lookup. However, the non-NULL ro has dual meaning
here: it may be supplied to provide route, and it may be supplied to
store and return to caller the route that ip_output()/ip6_output()
finds. In the latter case skipping FLOWTABLE lookup is pessimisation.
The difference between struct route filled by FLOWTABLE and filled
by rtalloc() family is that the former doesn't hold a reference on
its rtentry. Reference is hold by flow entry, and it is about to
be released in future. Thus, route filled by FLOWTABLE shouldn't
be passed to RTFREE() macro.
- Introduce new flag for struct route/route_in6, that marks route
not holding a reference on rtentry.
- Introduce new macro RO_RTFREE() that cleans up a struct route
depending on its kind.
- All callers to ip_output()/ip6_output() that do supply non-NULL
but empty route should use RO_RTFREE() to free results of
lookup.
- ip_output()/ip6_output() now do FLOWTABLE lookup always when
ro->ro_rt == NULL.
Tested by: tuexen (SCTP part)
Extend the so far IPv4-only support for multiple routing tables (FIBs)
introduced in r178888 to IPv6 providing feature parity.
This includes an extended rtalloc(9) KPI for IPv6, the necessary
adjustments to the network stack, and user land support as in netstat.
Sponsored by: Cisco Systems, Inc.
Reviewed by: melifaro (basically)
MFC after: 10 days
referenced within its timeout window. This change clears the LLE_VALID flag when an llentry
is removed from an interface's hash table and adds an extra check to the flowtable code
for the LLE_VALID flag in llentry to avoid retaining and using a stale reference.
Reviewed by: qingli@
MFC after: 2 weeks
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
This was lost when it was converted to using a condition variable instead
of lbolt.
- Drop the priority of flowtable down to PPAUSE when it is idle as well
since it is a similar background task.
MFC after: 2 weeks
variable into two so that we can see on which one we are waiting.
This might also more properly propagate the update of the
flowclean_cycles flag and avoid "hangs" people were seeing.
Suggested by: rwatson [1]
Sponsored by: ISPsystem [1]
Reviewed by: julian [1]
Updated by: Mikolaj Golub (to.my.trociny gmail.com)
Tested by: Mikolaj Golub (to.my.trociny gmail.com)
MFC After: 1 week
[1] Early 2010, initial version.
DPCPU_DEFINE and VNET_DEFINE macros, as these cause problems for various
people working on the affected files. A better long-term solution is
still being considered. This reversal may give some modules empty
set_pcpu or set_vnet sections, but these are harmless.
Changes reverted:
------------------------------------------------------------------------
r215318 | dim | 2010-11-14 21:40:55 +0100 (Sun, 14 Nov 2010) | 4 lines
Instead of unconditionally emitting .globl's for the __start_set_xxx and
__stop_set_xxx symbols, only emit them when the set_vnet or set_pcpu
sections are actually defined.
------------------------------------------------------------------------
r215317 | dim | 2010-11-14 21:38:11 +0100 (Sun, 14 Nov 2010) | 3 lines
Apply the STATIC_VNET_DEFINE and STATIC_DPCPU_DEFINE macros throughout
the tree.
------------------------------------------------------------------------
r215316 | dim | 2010-11-14 21:23:02 +0100 (Sun, 14 Nov 2010) | 2 lines
Add macros to define static instances of VNET_DEFINE and DPCPU_DEFINE.
- increase flow cleaning frequency and decrease flow caching time
when near the flow limit
- stop allocating new flows when within 3% of maxflows don't start
allocating again until below 12.5%
MFC after: 7 days
address as well as the transport protocol port information
from the outbound packets. The routing code is generic and
compares every byte in the given sockaddr object. Therefore
the temporary sockaddr objects must be cleared due to padding
bytes. In addition, the port information must be stripped
or the route search will either fail or return the incorrect
route entry.
Unit testing is done using OpenVPN over the if_tun interface.
MFC after: 7 days
- add a name argument to flowtable_alloc for printing with ddb commands
- extend ddb commands to print destination address or 4-tuples
- don't parse ports in ulp header if FL_HASH_ALL is not passed
- add kern_flowtable_insert to enable more generic use of flowtable
(e.g. system calls for adding entries)
- don't hash loopback addresses
- cleanup whitespace
- keep statistics per-cpu for per-cpu flowtables to avoid cache line contention
- add sysctls to accumulate stats and report aggregate
MFC after: 7 days
allow for connection load balancing across interfaces. Currently
the address alias handling method is colliding with the ECMP code.
For example, when two interfaces are configured on the same prefix,
only one prefix route is installed. So connection load balancing
among the available interfaces is not possible.
The other advantage of ECMP is for failover. The issue with the
current code, is that the interface link-state is not reflected
in the route entry. For example, if there are two interfaces on
the same prefix, the cable on one interface is unplugged, new and
existing connections should switch over to the other interface.
This is not done today and packets go into a black hole.
Also, there is a small bug in the kernel where deleting ECMP routes
in the userland will always return an error even though the command
is successfully executed.
MFC after: 5 days
during system initialization time. Since the flow-table is
designed to maintain per CPU flow cache, the existing code
did not check whether "smp_started" is true before calling
sched_bind() and sched_unbind(), which triggers a page fault.
Reviewed by: jeff
MFC after: immediately
specific routes. When the routing table changes, for example,
when a new route with a more specific prefix is inserted into the
routing table, the flow-table is not updated to reflect that change.
As such existing connections cannot take advantage of the new path.
In some cases the path is broken. This patch will update the affected
flow-table entries when a more specific route is added. The route
entry is properly marked when a route is deleted from the table.
In this case, when the flow-table performs a search, the stale
entry is updated automatically. Therefore this patch is not
necessary for route deletion.
Submitted by: simon, phk
Reviewed by: bz, kmacy
MFC after: 3 days
information for interface of IFF_POINTOPOINT or IFF_LOOPBACK type.
Since the L2 information (rt_lle) is invalid for these interface
types, accidental caching attempt will trigger panic when the invalid
rt_lle reference is accessed.
When installing a new route, or when updating an existing route, the
user supplied gateway address may be an interface address (this is
particularly true for point-to-point interface related modules such
as ppp, if_tun, if_gif). Currently the routing command handler always
set the RTF_GATEWAY flag if the gateway address is given as part of the
command paramters. Therefore the gateway address must be verified against
interface addresses or else the route would be treated as an indirect
route, thus making that route unusable.
Reviewed by: kmacy, julia, rwatson
Verified by: marcus
MFC after: 3 days
Specifically, not until the per-vnet parts have been set up.
Submitted by: kmacy@
Reviewed by: julian@, zec@
Approved by: re(rwatson)
MFC after: immediately
moving a frequently executed flowtable syslog statement from being
conditional on bootverbose to conditional on a per-vnet flowtable
sysctl.
Approved by: re@
the mbuf for obtaining the fib index
- check that a cached flow corresponds to the same fib index as the
packet for which we are doing the lookup
- at interface detach time flush any flows referencing stale rtentrys
associated with the interface that is going away (fixes reported
panics)
- reduce the time between cleans in case the cleaner is running at
the time the eventhandler is called and the wakeup is missed less
time will elapse before the eventhandler returns
- separate per-vnet initialization from global initialization
(pointed out by jeli@)
Reviewed by: sam@
Approved by: re@
