These bzero's should have been explicit_bzero's.
Reviewed by: cem, delphij
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25437
In addition to reducing lines of code, this also ensures that the full
allocation is always zeroed avoiding possible bugs with incorrect
lengths passed to explicit_bzero().
Suggested by: cem
Reviewed by: cem, delphij
Approved by: csprng (cem)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25435
It seems this manpage was copied from kvm_getloadavg(3), but the
DIAGNOSTICS section was not updated completely. Update the section with
correct information about a return value of -1.
MFC after: 3 days
This define caused a couple of symbols to disappear. To keep ABI
compatibility, we are going to keep the symbols exposed, but leave SSLv3 as
not in the default config (this is what OPENSSL_NO_SSL3 achieves). The
ramifications of this is an application can still use SSLv3 if it
specifically calls the SSLv3_method family of APIs.
Reported by: kib, others
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25451
Otherwise out-of-tree module builds will be broken for a lack of a
definition of MK_SCTP_SUPPORT.
Reported by: Michael Butler <imb@protected-networks.net>
MFC with: r362614
Sponsored by: The FreeBSD Foundation
color of a node (or, really, the color of the link from the parent to
the node) by using one of the last two bits of the parent pointer in
that parent node. Adjust rebalancing methods to account for where
colors are stored, and the fact that null children have a color too.
Adjust RB_PARENT and RB_SET_PARENT to account for this change.
Reviewed by: markj
Tested by: pho, hselasky
Differential Revision: https://reviews.freebsd.org/D25418
There were quite a few places where port_info was being accessed only to
get to the adapter.
Reviewed by: jhb@
MFC after: 1 week
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D25432
* Add four examples showing flags -e, -b, -d, -s
* Remove extra space at the end of the line reported by igor
Approved by: bcr@
Differential Revision: https://reviews.freebsd.org/D25426
All vm_object_page_remove() callers, except
linux_invalidate_mapping_pages() in the LinuxKPI, free swap space when
removing a range of pages from an object. The LinuxKPI case appears to
be an unintentional omission that could result in leaked swap blocks, so
unconditionally free swap space in vm_object_page_remove() to protect
against similar bugs in the future.
Reviewed by: alc, kib
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25329
Introduce -D flag that allows for the VM to be destroyed on guest initiated
power-off by the bhyve(8) process itself.
This is quality of life change that allows for simpler deployments without
the need for bhyvectl --destroy.
Requested by: swills
Reviewed by: 0mp (manpages), grehan, kib, swills
Approved by: kib (mentor)
MFC after: 2 weeks
Sponsored by: Mysterious Code Ltd.
Differential Revision: https://reviews.freebsd.org/D25414
If userspace has a newer bhyve than the kernel, it may be able to decode
and emulate some instructions vmm.ko is unaware of. In this scenario,
reset decoder state and try again.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24464
This is the key on the right side of the function keys, with the
"hamburger menu" icon on it.
Submitted by: GregV <greg@unrelenting.technology>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25390
This mode was added in r362496. Rename it to make the meaning more
clear.
PR: 247306
Suggested by: rpokala
Submitted by: Ali Abdallah <ali.abdallah@suse.com>
MFC with: r362496
Adding `kern.features.witness` helps expose whether or not the kernel has
`options WITNESS` enabled, so the `feature_present(3)` API can be used
to query whether or not witness(9) is built into the kernel.
This support is helpful with userspace applications (generally speaking,
tests), as it can be queried to determine whether or not tests related
to WITNESS should be run.
MFC after: 1 week
Reviewed by: cem, darrick.freebsd_gmail.com
Differential Revision: https://reviews.freebsd.org/D25302
Sponsored by: DellEMC Isilon
Thanks to work done in the NetBSD clang-format project. No functional change.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D25428
clang-format is enabled conditional on either WITH_CLANG_EXTRAS or
WITH_CLANG_FORMAT. Some sources in libclang are build conditional on
either rule, and obviously the clang-format binary itself depends on the
rule.
clang-format could still use a manual page.
Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D25427
This temporary mapping will become optional. Booting via loader(8)
means that the DTB will have already been copied into the kernel's
staging area, and is therefore covered by the early KVA mappings.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D24911
In locore, we must detect and handle different arguments passed by
loader(8) compared to what we recieve when booting directly via SBI
firmware. Currently we receive the hart ID in a0 and a pointer to the
device tree blob in a1. loader(8) provides only a pointer to its
metadata in a0.
The solution to this is to add an additional entry point, _alt_start.
This will be placed first in the .text section, so SBI firmware will
enter here, and jump to the common pagetable setup shortly after. Since
loader(8) understands our ELF kernel, it will enter at the ELF's entry
address, which points to _start. This approach leads to very little
guesswork as to which way we booted.
Fix-up initriscv() to parse the loader's metadata, continuing to use
fake_preload_metadata() in the SBI direct boot case.
Reviewed by: markj, jrtc27 (asm portion)
Differential Revision: https://reviews.freebsd.org/D24912
Proper TCP Cubic operation requires the knowledge
of the maximum congestion window prior to the
last congestion event.
This restores and improves a bugfix previously added
by jtl@ but subsequently removed due to a revert.
Reported by: chengc_netapp.com
Reviewed by: chengc_netapp.com, tuexen (mentor)
Approved by: tuexen (mentor), rgrimes (mentor)
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D25133
The use of t_rcvtime as proxy for the last transmission
fails for transactional IO, where the client requests
data before the server can respond with a bulk transfer.
Set aside a dedicated variable to actually track the last
locally sent segment going forward.
Reported by: rrs
Reviewed by: rrs, tuexen (mentor)
Approved by: tuexen (mentor), rgrimes (mentor)
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D25016
Some of the NetBSD contributed tests are gated behind the
__HAVE_LONG_DOUBLE flag. This flag seems to be defined only for
platforms whose long double is larger than their double. I could not
find this explicitly documented anywhere, but it is implied by the
definitions in NetBSD's sys/arch/${arch}/include/math.h headers, and the
following assertion from the UBSAN code:
#ifdef __HAVE_LONG_DOUBLE
long double LD;
ASSERT(sizeof(LD) > sizeof(uint64_t));
#endif
RISC-V has 128-bit long doubles, so enable the tests on this platform,
and update the comments to better explain the purpose of this flag.
Reviewed by: ngie
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25419
The ACPI Specification defines a Generic Address Structure (GAS),
which is used to describe UART controller register layout in the
SPCR table. The driver responsible for parsing it (uart_cpu_acpi)
wrongly associates the Access Size field to the uart_bas's regshft
and the register BitWidth to the regiowidth - according to
the definitions it should be opposite.
This problem remained hidden most likely because the majority of platforms
use 32-bit registers (BitWidth) which are accessed with the according
size (Dword). However on Marvell Armada 8k / Cn913x platforms,
the 32-bit registers should be accessed with Byte granulity, which
unveiled the issue.
This patch fixes above by proper values assignment and slightly improved
parsing.
Note that handling of the AccessWidth set to EFI_ACPI_6_0_UNDEFINED is
needed to work around a buggy SPCR table on EC2 x86 "bare metal" instances.
Reviewed by: manu, imp, cperciva, greg_unrelenting.technology
Obtained from: Semihalf
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25373
Update 4.2.8p14 --> 4.2.8p15
Summary: Systems that use a CMAC algorithm in ntp.keys will not release
a bit of memory on each packet that uses a CMAC keyid, eventually causing
ntpd to run out of memory and fail. The CMAC cleanup from
https://bugs.ntp.org/3447, part of ntp-4.2.8p11, introduced a bug whereby
the CMAC data structure was no longer completely removed.
MFC after: 3 days
Security: NTP Bug 3661
These are picked out by the amd64-gcc6 build; time() is declared in <time.h>
and delay() is declared in <bootstrap.h>. These are the correct places for
these in stand/, so remove the duplicate declarations and make sure the
delay() consumer in libefi that depended on the extra delay() declaration
includes <bootstrap.h>.
MFC after: 1 week
RB_CLEAR_NODE. But it is not an expression, and ought not to be
enclosed in parens. Remove them.
Approved by: markj
Differential Revision: https://reviews.freebsd.org/D25421
The change from "slave" processes to "minion" processes to "worker"
processes left some less-than-coherent names:
1. "enslave" turned into the ungrammatical "enworker".
2. "slp" (SLave Pointer) turned into "mlp" (Minion [L] Pointer?).
Convert "enworker" to "create_workers" (the function in question forks
off 3 worker processes), and replace "mlp" with "wp" (Worker Pointer)
and "tmlp" with "twp" (Temporary Worker Pointer).
Reviewed by: imp, cem, danfe
Differential Revision: https://reviews.freebsd.org/D25403
