the hard-coded string "not available" to ensure reproducible builds.
Discussed with: emaste
Approved by: re (rgrimes)
Sponsored by: The FreeBSD Foundation
notices the missing ntpd user and refers to UPDATING. This change makes
it more clear which aspect of UPDATING is important for the ntpd change.
PR: 231334
Approved by: re (gjb)
Output padding is specified via outlen, which is set using the return value
of fprintf. Because it's printing that padding plus a trailing byte, it
grows by one each iteration rather than reflecting actual length.
Additionally, iec was sized improperly for scaling up similarly to si.
Fixing this revealed that the humanize_number(3) call to populate persec
was using the wrong width.
Submitted by: Thomas Hurst <tom@hur.st>
Reviewed by: imp
Approved by: re (kib)
Differential Revision: https://reviews.freebsd.org/D16960
r338642 toggled the REPRODUCIBLE_BUILD knob but missed the
corresponding kern.opts.mk change.
We want to build the 12.0 release artifacts with reproducible builds
mode enabled. Switch it on in HEAD now to enable testing with upcoming
ALPHA builds. We can revisit the default setting for HEAD after the
branch is created.
This change eliminates the build metadata (user, hostname, timestamp,
etc.) from the kernel and loader. If the src tree is a git, svn or p4
checkout with changes then the metadata is retained.
The WITHOUT_REPRODUCIBLE_BUILD src.conf(5) knob can be used to revert
to the previous behaviour.
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
We want to build the 12.0 release artifacts with reproducible builds
mode enabled. Switch it on in HEAD now to enable testing with upcoming
ALPHA builds. We can revisit the default setting for HEAD after the
branch is created.
This change eliminates the build metadata (user, hostname, timestamp,
etc.) from the kernel and loader. If the src tree is a git, svn or p4
checkout with changes then the metadata is retained.
The WITHOUT_REPRODUCIBLE_BUILD src.conf(5) knob can be used to revert
to the previous behaviour.
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Both drivers use this interface so add a dependancy on it.
Since awg uses aw_sid for generating the MAC address, make it
depend on both aw_sid and nmvem so when only removing nvmem from
kernel config it will not include this driver.
Reported by: sbruno
Approved by: re (gjb)
It completely unnecessarily iterates over all filesystems and happens
to be executed a lot e.g. by synth.
Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17143
The Xen page-table walker used to resolve the virtual addresses in the
hypercalls will refuse to access user-space pages when SMAP is enabled
unless the AC flag in EFLAGS is set (just like normal hardware with
SMAP support would do).
Since privcmd allows forwarding hypercalls (and buffers) from
user-space into Xen make sure SMAP is temporary disabled for the
duration of the hypercall from user-space.
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
Register interrupts using the PIC pic_register_sources method instead
of doing it in apic_setup_io. This is now required, since the internal
interrupt structures are not yet setup when calling apic_setup_io.
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
Instead of panicking. Legacy PVH mode doesn't provide a lapic, and
since native_lapic_intrcnt is called unconditionally this would cause
the assert to trigger. Change the assert into a continue in order to
take into account the possibility of systems without a lapic.
Reviewed by: jhb
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D17015
The recommended way to obtain the vcpu id is using the cpuid
instruction with a specific leaf value. This leaf value must be
obtained at runtime, and it's done when populating the hypercall page.
Legacy PVH however will get the hypercall page populated by the
hypervisor itself before booting, so the cpuid leaf was not actually
set, thus preventing setting the vcpu id value from cpuid.
Fix this by making sure the cpuid leaf has been probed before
attempting to set the vcpu id.
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
That's the only mode in FreeBSD that requires the usage of PIRQs, so
there's no need to attach the PIRQ PIC when running in other modes.
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
When adding support for the new PVH mode the kenv handling was
switched to use a boot time allocated scratch space, however the
legacy PVH early boot code was not modified to allocate such space.
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
The vcpu_id for legacy PVH mode can be set from the output of cpuid,
so there's no need to have a special function to set it.
Also note that xenpv_set_ids should have been executed only for PV
guests, but was executed for all guests types and vcpu_id was later
fixed up for HVM guests.
Reported by: cperciva
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
So that it's done when the vcpu_id has been set. For the BSP the
vcpu_id is set at SUB_INTR, while for the APs it's done in
init_secondary_tail that's called at SUB_SMP order FIRST.
Reported and tested by: cperciva
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D17013
When running as a specific type of Xen guest the hypervisor won't
provide any emulated IO-APICs or legacy PICs at all, thus hitting the
following assert in the MSI code:
panic: Assertion num_io_irqs > 0 failed at /usr/src/sys/x86/x86/msi.c:334
cpuid = 0
time = 1
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff826ffa70
vpanic() at vpanic+0x1a3/frame 0xffffffff826ffad0
panic() at panic+0x43/frame 0xffffffff826ffb30
msi_init() at msi_init+0xed/frame 0xffffffff826ffb40
apic_setup_io() at apic_setup_io+0x72/frame 0xffffffff826ffb50
mi_startup() at mi_startup+0x118/frame 0xffffffff826ffb70
start_kernel() at start_kernel+0x10
Fix this by removing the assert in the MSI code, since it's possible
to get to the MSI initialization without having registered any other
interrupt sources.
Reviewed by: jhb
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D17001
Or else it triggers the following bug:
APIC: CPU 6 has ACPI ID 6
APIC: CPU 7 has ACPI ID 7
panic: vm_wait in early boot
cpuid = 0
time = 1
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xffffffff826ff8d0
vpanic() at vpanic+0x1a3/frame 0xffffffff826ff930
panic() at panic+0x43/frame 0xffffffff826ff990
vm_wait_domain() at vm_wait_domain+0xf9/frame 0xffffffff826ff9c0
kmem_alloc_contig_domain() at kmem_alloc_contig_domain+0x252/frame 0xffffffff826ffa50
kmem_alloc_contig() at kmem_alloc_contig+0x6c/frame 0xffffffff826ffad0
contigmalloc() at contigmalloc+0x2e/frame 0xffffffff826ffb00
x86bios_modevent() at x86bios_modevent+0x225/frame 0xffffffff826ffb20
module_register_init() at module_register_init+0xc0/frame 0xffffffff826ffb50
mi_startup() at mi_startup+0x118/frame 0xffffffff826ffb70
start_kernel() at start_kernel+0x10
While there also make x86bios_unmap_mem idempotent.
Reviewed by: kib
Approved by: re (gjb)
Sponsored by: Citrix Systems R&D
Differential revision: https://reviews.freebsd.org/D17000
Restore the original behavior of unlink(1), passing the provided filename
directly to unlink(2), handling the first argument being "--" correctly.
This fixes "unlink -foo", broken in r97533.
PR: 228448
Submitted by: Brennan Vincent <brennan@umanwizard.com> (original version)
Submitted by: Yuri Pankov
Reported by: Brennan Vincent <brennan@umanwizard.com>
Reviewed by: emaste, kevans, vangyzen, 0mp
Approved by: re (delphij)
Differential Revision: https://reviews.freebsd.org/D17132
been detached. When a USB device has been detached the kernel file handle
stops responding to commands. USB applications which continue to run after
the USB device has been detached, depend on LibUSB generated events to tear
down its pending USB transfers. Add code to handle the needed cleanup when
processing the USB transfer(s) fails and prevent new USB transfer(s) from
being submitted.
Found by: Ludovic Rousseau <ludovic.rousseau+freebsd@gmail.com>
PR: 231076
MFC after: 1 week
Approved by: re (gjb)
Sponsored by: Mellanox Technologies
* Fix a bug where the SYN handling during established state was
applied to a front state.
* Move a check for retransmission after the timer handling.
This was suppressing timer based retransmissions.
* Fix an off-by one byte in the sequence number of retransmissions.
* Apply fixes corresponding to
https://svnweb.freebsd.org/changeset/base/336934
Reviewed by: rrs@
Approved by: re (kib@)
MFC after: 1 month
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16912
Not all libpcap backends use the BPF compatible set
of IOCTLs. For example the mlx5 backend uses libibverbs
which is currently not capsicum compatible.
Disable sandboxing for such backends.
MFC after: 3 days
Discussed with: emaste@
Approved by: re (kib)
Sponsored by: Mellanox Technologies
relocation.
elf_relocaddr() has a hook to handle VIMAGE data addresses.
This fixes VIMAGE support for RISC-V when built as a module.
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Similar to arm64, riscv compiler uses PC-relative loads/stores,
and with static data compiler does not emit relocations.
In result, kernel module linker has nothing to fix and data accessed
from the wrong location.
Approved by: re (gjb)
Sponsored by: DARPA, AFRL
Update libarchive to 3.3.3
As all important changes have already been merged from libarchive git
this is just version number bump, documentation update and some
polishing for cpio tests. Other source code changes are not relevant to
FreeBSD.
Approved by: re (gjb)
MFC after: 1 week
We generate the installed objcopy man page from ELF Tool Chain's
elfcopy, but the sed expresion used for this ended up producing
"objcopy, objcopy - copy and translate object files".
Instead of replacing the first "elfcopy" with objcopy, just remove it.
Approved by: re (gjb)
newvers.sh supports two modes for reproducible builds:
-r Reproducible build. Do not embed directory names, user
names, time stamps or other dynamic information into
the output file. This is intended to allow two builds
done at different times and even by different people on
different hosts to produce identical output.
-R Reproducible build if the tree represents an unmodified
checkout from a version control system. Metadata is
included if the tree is modified.
Switch to the second mode when reproducible builds are enabled.
The value of a reproducible build is much less when building from an
uncontrolled, modified src tree, and -R likely provides the best
compromise in allowing the REPRODUCIBLE_BUILD knob to be enabled by
default for the release.
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
From Piotr:
ix(4), ixv(4): Add VLAN tag strip check when receiving packets
ixv(4): Fix support for VLAN_HWTAGGING and VLAN_HWFILTER flags
This change will prevent driver from passing VLAN tags when
interface configuration is not expecting them. VF driver will
check for VLAN_HWTAGGING and VLAN_HWFILTER flags and act adequately.
This patch resolves problem occuring on EC2 platforms.
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reported by: cperciva@
Reviewed by: cperciva@, Intel Networking
Approved by: re
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D17061
use of u3g(4) dongles, and in many cases can work out of the box.
Reviewed by: hselasky
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16974
of the fix/workaround for the "ctld hanging on reload" problem.
PR: 220175
Reported by: Eugene M. Zheganin <emz at norma.perm.ru>
Tested by: Eugene M. Zheganin <emz at norma.perm.ru>
Approved by: re (kib)
MFC after: 2 weeks
Sponsored by: playkey.net
Document sysctls for the second PWM channel added in r335855
Also fix some minor style issues and a typo.
Approved by: re (gjb)
Submitted by: bobf@mrp3.com
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D17084
imprudent reuse of static buffers, the end-of-transfer statistics
displayed when stdout is not a tty always ended up as 0 B / 0 Bps.
Reorganize the code to use caller-provided buffers, tweak the ETA
display a bit, and reduce the visual differences between the tty and
non-tty end-of-transfer displays.
PR: 202424
Approved by: re (gjb@)
Lookups are protected by an epoch section, so the LB group linkage must
be a CK_LIST rather than a plain LIST. Furthermore, we were not
deferring LB group frees, so in_pcbremlbgrouphash() could race with
readers and cause a use-after-free.
Reviewed by: sbruno, Johannes Lundberg <johalun0@gmail.com>
Tested by: gallatin
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17031
No functional change intended.
Reviewed by: alc, kib
Approved by: re (gjb)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17028
