Mainly focus on files that use BSD 3-Clause license.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
Initially, only tag files that use BSD 4-Clause "Original" license.
RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133
Implement double pass of the relevant Makefiles. First make a list of
library names and directories and then scan for all the dependencies.
Spaces in directories in the source tree are not supported.
This avoids using hardcoded mappings between the library name
and the directory containing the library Makefile.
Add support for scanning contrib/ofed .
Bail out on any errors.
Sponsored by: Mellanox Technologies
MFC after: 1 week
kern.poweroff_on_panic which, when enabled, instructs a system to
power off on a panic instead of a reboot.
kern.powercyle_on_panic which, when enabled, instructs a system to
power cycle, if possible, on a panic instead of a reboot.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D13042
Transition to WITH/WITHOUT_LOADER_GELI to flag support or not of GELI
in the boot loaders. Add HAVE_GELI so components can flag they need
support (since it's too large to include everywhere). Add temporary
warnings for the old forms to ease transition.
Also, update test script to build without GELI on x86.
Sponsored by: Netflix
Rename LOADER_FIREWIRE_SUPPORT to MK_LOADER_FIREWIRE. Only build
libfirewire when this is "yes". Add note to updating. Fix build script
to build this for x86 so the option doesn't decay. sparc64 supports
ZFS, so also build it MK_ZFS=no.
Sponsored by: Netflix
This can be disabled by putting WITHOUT_AUTO_OBJ=yes in /etc/src-env.conf, not
/etc/src.conf, or passing it in the environment.
The purpose of this rather than simply flipping the default of AUTO_OBJ to yes
is to avoid hassling users with auto.obj.mk failures if the wanted OBJDIR is
not writable. It will fallback to writing to the source directory like it does
today if MAKEOBJDIRPREFIX is not writable.
The act of enabling MK_AUTO_OBJ disables all 'make obj' treewalks since
previous work has made those not run if MK_AUTO_OBJ==yes in Makefile.inc1.
Relnotes: yes
Reviewed by: sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12841
and quite lightwait.
The purpose of this commit, and the previous one, is to be able to measure
overhead of pointer arguments - in case you're running a strange architecture
where pointers and integers are quite different things at the hardware level.
Obtained from: CheriBSD
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
This changes the build OBJDIR from the older style of /usr/obj/<srcdir> for
native builds, and /usr/obj/<target>.<target_arch>/<srcdir> for cross builds to
a new simpler format of /usr/obj/<srcdir>/<target>.<target_arch>. This
new format is used regardless of cross or native build. It allows
easier management of multiple source tree object directories.
The UNIFIED_OBJDIR option will be removed and its feature made permanent
for the 12.0 release.
Relnotes: yes (don't note UNIFIED_OBJDIR option since it will be removed)
Prior work: D3711 D874
Reviewed by: gjb, sjg
Discussed at: https://lists.freebsd.org/pipermail/freebsd-arch/2016-May/017805.html
Discussed with: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12840
- r325082 split native-xtools-install out of native-xtools.
- r325000 incorrectly changed the installation path from /nxb-bin to /.
Discussed with: imp at D12782
To ensure that I don't break the MK_ZFS=no case (currently working),
add that to the build, at least for i386 and amd64. Also, out of an
abundance of caution, clean single threaded, and then build in a
separate make. Otherwise, I hit a race where we build before objdir
has been created, which breaks at the moment.
Sponsored by: Netflix
The new native-xtools uses 'make toolchain' so overriding DESTDIR
as a make argument may interfere with WORLDTMP handling.
The target also does a 'mkdir -p ${NXBDESTDIR}/usr', so we should
be modifying that rather than DESTDIR.
Note this causes the native-xtools binaries to be installed in
NANO_WORLDDIR/usr NANO_WORLDDIR/bin rather than NANO_WORLDDIR/nxb-bin/usr
and NANO_WORLDDIR/nxb-bin/bin. This was the case before this change
as well.
MFC after: 2 weeks
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D12782
One could run this from any directory, but it's designed to do
regression testing on sys/boot (it only tests on a subset of
architectures since all of them would take a lot longer and not help).
This will also ensure that future commits to sys/boot compile
everywhere.
Sponsored by: Netflix
diff (and man page) are not from GNU, as of r317209, and should not be
deleted if WITHOUT_GNU_DIFF is set. (WITHOUT_GNU_DIFF still controls
whether diff3 is built.)
Sponsored by: The FreeBSD Foundation
If they are still needed, you can find them in the net/bsdrcmds port.
This was proposed June, 20th and approved by various committers [1].
They have been marked as deprecated on CURRENT in r320644 [2] on July, 4th.
Both stable/11 and release/11.1 contain the deprecation notice (thanks to
allanjude@).
Note that ruptime(1)/rwho(1)/rwhod(8) were initially thought to be part of
rcmds but this was a mistake and those are therefore NOT removed.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html
[2] https://svnweb.freebsd.org/base?view=revision&revision=320644
Reviewed by: bapt, brooks
Differential Revision: https://reviews.freebsd.org/D12573
/usr/local/etc gets created and populated by packages. However, if no
packages are installed when setup_nanobsd is run, this symlink won't
get created, causing problems if packages are installed later (say on
first boot). Therefore, always create the symlink and etc/local. It
does no harm and may help.
Inspired by crochet issue #183 (consuingly says NanoBSD, means crochet)
Sponsored by: Netflix
This function was only set in legacy.sh and only at the very end after
the disk image had been successfully created. The only difference will be
that the message 'Error encountered. Please check...' will not appear if
nanobsd.sh exits with an error after the disk image has been created.
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
== Rationale ==
r295380 introduced "make check" and consolidated means for running
test code in an attempt to simplify running tests. One could either
install files/libraries/programs and run "make check", or run "make check"
with an explicit CHECKDIR, e.g., `make check CHECKDIR=$(make -V.OBJDIR)``.
One criticism that was received is that "make check" should be run with
the intent of making dev->test->commit easier, which means that the target
audience's workflow should be developers. One developer pattern available
in other opensource projects is to run test code from a developer sandbox,
instead of installing to a system.
== Method ==
This approach is slightly different from the standard approach, in the sense
that it builds and installs into a deterministic directory under .OBJDIR (as I call it,
the "sandbox"), then runs "make check" against that. In the event the test
run is successful, the deterministic directory is removed to save space.
== Approach ==
bsd.lib.mk, bsd.prog.mk:
To support this functionality, a new variable `HAS_TESTS` is being added.
HAS_TESTS enables appropriate behavior with bsd.lib.mk and bsd.prog.mk, as
follows:
- Add "make check" as an available target from the directory.
- Pass down appropriate variables via ${TESTS_ENV}, i.e.,
${TESTS_LD_LIBRARY_PATH} and ${TESTS_PATH}.
One should add "HAS_TESTS" to directories containing tests in them, e.g. from
bin/sh/Makefile,
HAS_TESTS=
SUBDIR.${MK_TESTS}+= tests
HAS_TESTS doesn't automatically add the tests subdirectory for flexibility
reasons.
bsd.opts.mk, src.opts.mk:
- The knob ${MK_MAKE_CHECK_USE_SANDBOX} has been added, both to explicitly
direct (internally) when to set a deterministic ${DESTDIR} and to also allow
users to disable this behavior globally, i.e., via src.conf.
- MK_TESTS has been promoted from src.opts.mk to bsd.opts.mk to leverage
syntactic sugar for having MK_TESTS be a dependency for
MK_MAKE_CHECK_USE_SANDBOX, but to also ensure that src.opts.mk isn't required
to use suite.test.mk (which is a dependency of bsd.test.mk).
suite.test.mk:
- beforecheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Build.
-- Run "make hierarchy" on the sandbox dir.
-- Install the tests/files to the sandbox dir.
- aftercheck behavior (when MK_MAKE_CHECK_USE_SANDBOX is enabled) is modified
from a no-op to:
-- Remove the sandbox dir.
Again, because the dependency order set in bsd.test.mk is
beforecheck -> check -> aftercheck, "make check" will not be run unless
"beforecheck" completes successfully, and "aftercheck" will not be run unless
"beforecheck" and "check" complete successfully.
== Caveats ==
- This target must either be run with MK_INSTALL_AS_USER or as root. Otherwise
it will fail when running "make install" as the default user/group for many
makefiles when calling INSTALL is root/wheel.
- This target must be run from a suitable top-level directory. For example,
running tests from `tests/sys/fs/tmpfs` won't work, but `tests/sys/fs` will,
because `tests/sys/fs/tmpfs` relies on files installed by `tests/sys/fs`.
- Running MK_INSTALL_AS_USER may introduce determinism issues. However, using
it could identify deficiences in tests in terms of needing to be run as
root, which are not properly articulated in the test requirements.
- The doesn't negate the need for running "make installworld" and
"make checkworld", etc. Again, this just is intended to simplify the
dev->test->commit workflow.
== Cleanup done ==
- CHECKDIR is removed; one can use "MK_MAKE_CHECK_USE_SANDBOX=no" to enable
"legacy" (r295380) behavior.
MFC after: 2 months
Relnotes: yes (CHECKDIR removed; "make check" behavior changed)
Requested by: jhb
Reviewed by: arch (silence), testing (silence)
Differential Revision: D11905
As peter@ points out in pr/220953:
"rwho, rwhod and ruptime are not part of the remote login suite (rsh, rlogin
etc).
They should *not* be in the rcmds package which is disabled by default. We
rely on rwho/rwhod/ruptime in the freebsd.org cluster."
This commit is a re-commit of r322029 and r322031 with a better commit log, as
pointed out by ngie@.
This also includes the necesary changes to OptionalObsoleteFiles.inc, as
requested by jhb@.
PR: 220953
Reported by: peter@, jhb@
Differential Revision: https://reviews.freebsd.org/D11743
