Trivial oversight missed in r314240 cleanup because I enable these knobs on
my test machines.
MK_INET6_SUPPORT - rtsol
MK_NETCAT - nc
MFC after: 3 days
Sponsored by: Dell EMC Isilon
mean that you need a world built to reliably build pkg-gen but this keeps
the build from failing when your source doesn't match your host running
version, e.g. building 12 on 11.
Submitted by: Matt Macy <mmacy@nextbsd.org>
MFC after: 2 weeks
Sponsored by: Limelight Networks
Move cxgbetool from tools/tools to usr.sbin. Compile and install it on
platforms where cxgbe(4) is built by default. Knobs (WITH_CXGBETOOL and
WITHOUT_CXGBETOOL) have been added so that the user can override the
default setting.
Reviewed by: ngie@, gnn@, bdrewery@
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D9854
For linux the mmap offset must also be page aligned, and we
need to disable macros like __FBSDID()
Change the linux osdep_uuidgen() to use more portable gettimeofday().
Reviewed by: marcel
Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.
Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96
There are other areas of the tree that will need to be evaluated for sanity
if they're supposed to be conditionally compiled out of the build/install,
like libzpool
MFC after: 1 month
Relnotes: yes (this might break someone's system if have the knob set)
Sponsored by: Dell EMC Isilon
It doesn't directly control what gets installed today; it indirectly
pulls other knobs (like MK_KERBEROS, etc).
MFC after: 1 weeks
Sponsored by: Dell EMC Isilon
directories are pruned when the appropriate knobs are turned.
Specifically, turning off bsdconfig, locales, examples, i18n, man,
ntp, syscons. It may not seem like a lot, but it helps when trying
to keep an x86 image under 96MB for MFSRoot netbooting.
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D9558
compile options. Remove doxygen pointers to now deleted files. Remove
EISA and VME as examples in bus_space.9.
Retained EISA mode code for IO PIC and MPTABLES because that's not
EISA bus, per se, and some people have abused EISA to mean "EISA-like
behavior as opposed to ISA" rather than using it for EISA add-in
cards.
Relnotes: yes
machines, only a few 486 machines that used it, and those haven't had
enough memory to run FreeBSD for quite some time (often limited to
16MB).
Not to be confused with the Machine Check Architecture, which is still
very much alive and used (and untouched by this commit).
No Objection From: arch@
mkimg for building on systems like FreeBSD 11.0 that don't have my
-a changes.
o Set NANO_ROOT and NANO_ALTROOT for std-* since their values don't
change when we set NANO_SLICE*.
PR: 216829
PR: 216830
The delta here is just between the current TX/RX copmletion and the previous
TX/RX completion. The metadata needed to link TX descriptor timestamps to their
/completion/ timestamp isn't there yet.
sources to return timestamps when SO_TIMESTAMP is enabled. Two additional
clock sources are:
o nanosecond resolution realtime clock (equivalent of CLOCK_REALTIME);
o nanosecond resolution monotonic clock (equivalent of CLOCK_MONOTONIC).
In addition to this, this option provides unified interface to get bintime
(equivalent of using SO_BINTIME), except it also supported with IPv6 where
SO_BINTIME has never been supported. The long term plan is to depreciate
SO_BINTIME and move everything to using SO_TS_CLOCK.
Idea for this enhancement has been briefly discussed on the Net session
during dev summit in Ottawa last June and the general input was positive.
This change is believed to benefit network benchmarks/profiling as well
as other scenarios where precise time of arrival measurement is necessary.
There are two regression test cases as part of this commit: one extends unix
domain test code (unix_cmsg) to test new SCM_XXX types and another one
implementis totally new test case which exchanges UDP packets between two
processes using both conventional methods (i.e. calling clock_gettime(2)
before recv(2) and after send(2)), as well as using setsockopt()+recv() in
receive path. The resulting delays are checked for sanity for all supported
clock types.
Reviewed by: adrian, gnn
Differential Revision: https://reviews.freebsd.org/D9171
invoked as llvm-ranlib, it can create an archive symbol table for
archives of objects compiled for LTO by an LLVM compiler.
Submitted by: Dan McGregor <danismostlikely@gmail.com>
MFC after: 3 days
When WITH_REPRODUCIBLE_BUILD=yes is set in src.conf(5), eliminate the
time, user, and host from the loader's version information. This allows
builds to produce bit-for-bit identical output.
Reviewed by: bapt
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8842
Upstream kk_Cyrl_KZ has been renamed kk_KZ
Upstream mn_Cyrl_MN has been renamed mn_MN
For ru_RU: the default currency for unicode is now ₽ which is not mapped to
other encoding, add charmaps entries to be able to generate them
The kernel builds reproducibly, except for the time, date, user, and
hostname baked into the kernel (reported at startup and via the
kern.version sysctl for uname). Add a build knob to disable the
inclusion of this metadata.
Reviewed by: jhb
MFC after: 1 month
Relnotes: Yes
Sponsored by: Reproducible Builds World Summit 2, Berlin
Differential Revision: https://reviews.freebsd.org/D8809
away in the past from the current time. This should be plenty for the
scheduler to do its job. It provides assurance that the timestamp
returned is actually a valid one, not just some random garbage.
used. We can do it programmatically, but that would make code convoluted
and more complex. I have two more of those types coming for the CLOCK_REALTIME
and CLOCK_MONOTONIC. This seems like an elegant and scallable approach.
file into smaller pieces that are hopefully easier to understand
and extend. This is to pave the ground for adding few more
socket timestamp formats that I am working on here.
No functional changes (I hope).
If set it installs LLD as /usr/bin/ld. LLD (as of version 3.9) is not
capable of linking the world and kernel, but can self-host and link many
substantial applications. GNU ld continues to be used for the world and
kernel build, regardless of how this knob is set.
It is on by default for arm64, and off for all other CPU architectures.
Sponsored by: The FreeBSD Foundation
vmpage requires struct pmap to exist and contain a pm_stats field. As of
r308817, either AIM or BOOKE is required to be set in order to get their
respective pmap structs. Rather than expose them both, or try to unify them
unnecessarily, add a third option which contains only a pm_stats field, and
change the two existing pmap structures to place the common fields at the
beginning of the struct. This actually fixes the stats collection by libkvm on
AIM hardware, because before it was accessing a possibly different offset, which
would cause it to read garbage.
Bump __FreeBSD_version to denote this ABI change, so that ports which depend on
libkvm can be rebuilt.
Allow -B to mean -K -W.
There are times when fixing non-base elementes of the build that you
don't want to wait to get a completely clean world install. This
allows that at the cost of a little danger.
Submitted by: gallatin@
Sponsored by: Netflix, Inc
In a git worktree, the gitdir is in an entirely different location.
In arcgit, use git rev-parse --git-dir to get the correct path to it
always.
When running git from outside of the work tree, as in importgit,
the path provided by git rev-parse --git-dir can be either a
relative or absolute path depending on the work tree. Rather
than trying to deal with that, just use git -C.
Differential Revision: https://reviews.freebsd.org/D8501
Reviewed by: markj
Hide dialog specific code behind HAVE_DIALOG. It allows to build a stripped
down version (missing the dialog UI) but perfectly function tzsetup when
world is built WITHOUT_DIALOG
Reorganise a bit the code to limit the number of blocks under HAVE_DIALOG
Reviewed by: emaste
Sponsored by: https://reviews.freebsd.org/D8325
Add some scripts that wraps some FreeBSD Project infrastructure
and simplifies using them with git. The scripts are:
- arcgit, which creates a series of reviews in Differential
- importgit, which applies a series of git commits to svn
Differential Revision: https://reviews.freebsd.org/D2071
This is added to facilitate experiments building FreeBSD without
copyleft software.
If WITHOUT_GNU_DIFF is set no /usr/bin/diff or /usr/bin/diff3 will
be built.
If WITHOUT_GNU_GREP is set then BSD grep will be installed as
/usr/bin/bsdgrep or /usr/bin/grep, depending on the WITH_BSD_GREP
knob.
Reviewed by: brooks (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: Differential Revision: https://reviews.freebsd.org/D8288
All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.
Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw
Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.
Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes
This commit, long overdue, contains contributions in the last 2 years
from Stefano Garzarella, Giuseppe Lettieri, Vincenzo Maffione, including:
+ fixes on monitor ports
+ the 'ptnet' virtual device driver, and ptnetmap backend, for
high speed virtual passthrough on VMs (bhyve fixes in an upcoming commit)
+ improved emulated netmap mode
+ more robust error handling
+ removal of stale code
+ various fixes to code and documentation (some mixup between RX and TX
parameters, and private and public variables)
We also include an additional tool, nmreplay, which is functionally
equivalent to tcpreplay but operating on netmap ports.
GNU rcs is still available as a package:
- rcs: Latest GPLv3 GNU rcs version.
- rcs57: Copy of the latest version of GNU rcs (GPLv2) from base.
Relnotes: yes
On some targets 'make showconfig' currently reports both 'no' and 'yes'
for some options. For example:
% make TARGET=mips showconfig | grep SSP
MK_SSP = no
MK_SSP = yes
Emit a warning on encountering a duplicated variable, and skip the
second entry.
Sponsored by: The FreeBSD Foundation
In FreeBSD 11 ELF Tool Chain's elfcopy is installed as objcopy by
default, with the option to switch back to GNU objcopy by setting
WITHOUT_ELFCOPY_AS_OBJCOPY in make.conf.
We plan to remove the outdated in-tree binutils in FreeBSD 12, so
remove the temporary transition aid.
Reviewed by: brooks, imp
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7337
It also turns off dependencies (bsdinstall, bsdconfig, dpv, tzsetup).
Reviewed by: dteske
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7969
All remaining tools using rcs has been switched to directly use diff3(1):
- etcupdate(8)
- freebsd-update(8)
Note that the ident(1) tool is been already replaced long ago with a BSD
licensed version, as such it remains installed.
GNU rcs is still available from ports:
- rcs: newer GPLv3 version
- rcs57: the latest version from base (GPLv2)
Althought cryptotest itself has a -z mode to test all algorithms at a variety
of sizes, this script allows us to be more selective. Threads and buffer sizes
move in powers of two from 1, for threads, and 256 for buffer sizes.
e.g. cryptorun.sh aes 4 512
Test aes with 1, 2 and 4 processes, and at sizes of 256 and 512 bytes.
Sponsored by: Rubicon Communications, LLC (Netgate)
Use this to control inclusion of the libllvm functionality required
by lld. Enable by default on arm64 and amd64, the two platforms where
lld is most usable for testing.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7713
config or a list of them. Put the variable into quotes, to avoid syntax
error from [ in case of list. Without this change list is still working,
but an error is reported in the build log file.
Reviewed by: imp
The wl(4) driver supports pre-802.11 PCCard wireless adapters that
are slower than 802.11b. They do not work with any of the 802.11
framework and the driver hasn't been reported to actually work in a
long time.
Relnotes: yes
The si(4) driver supported multiport serial adapters for ISA, EISA, and
PCI buses. This driver does not use bus_space, instead it depends on
direct use of the pointer returned by rman_get_virtual(). It is also
still locked by Giant and calls for patch testing to convert it to use
bus_space were unanswered.
Relnotes: yes
This tool parses the ACPI DMAR table looking for DMA remapping devices.
For each device it walks the root table and any context tables
referenced to display mapping info for PCI devices.
Note that acpidump -t already parses the info in the ACPI DMAR tables
directly. This tool examines some of the data structures the DMAR
remapping engines use to translate DMA requests.
Reviewed by: kib, grehan
MFC after: 1 month
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D7444
This is meant to install a new BE (boot environment) given a fully built
world/kernel. In addition to installing world and kernel in the new BE,
it also automatically performs /etc updates (using etcupdate or mergemaster)
and package updates (using pkg).
Because this process is performed in a new BE, it reduces the need for a
second reboot. It also means a reboot into a partially updated system (due
to install or hardware failure) can't happen.
Inspired by and similar in function to Solaris/illumos-style upgrades.
