Do not try to change attributes for DMAP when working on a mapping
which is not covered by the DMAP. This was reported on real system
where a BAR of a device (NTB) was mapped outside the PCI window.
Reported and tested by: mav
Reviewed by: jhb, mav
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D6668
p_sched is unused.
The struct td_sched is always co-allocated with the struct thread,
except for the thread0. Avoid useless indirection, instead calculate
td_sched location using simple pointer arithmetic in td_get_sched(9).
For thread0, which is statically allocated, create a structure to
emulate layout of the dynamic allocation.
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D6711
BUS_MAP_INTR() is used to get an interrupt mapping data according
to provided hints. The hints could be modified afterwards, but only
if mapping data was allocated. This method is intended to be called
before BUS_ALLOC_RESOURCE().
An interrupt mapping data describes an interrupt - hardware number,
type, configuration, cpu binding, and whatever is needed to setup it.
(2) Introduce a method which allows storing of an additional data
in struct resource to be available for bus drivers. This method is
convenient in two ways:
- there is no need to rework existing bus drivers as they can simply
be extended to provide an additional data,
- there is no need to modify any existing bus methods as struct
resource is already passed to them as argument and thus stored data
is simply accessible by other bus drivers.
For now, implement this method only for INTRNG.
This is motivated by needs of modern SOCs where hardware initialization
is not straightforward and resources descriptions are complex, opaque
for everyone but provider, and may vary from SOC to SOC. Typical
situation is that one bus driver can fetch a resource description for
its child device, but it's opaque for this driver. Another bus driver
knows a provider for this kind of resource and can pass this resource
description to it. In fact, something like device IVARS would be
perfect for that if implemented generally enough. Unfortunatelly, IVARS
are usable only by their owners now. Only owner knows its IVARS layout,
thus other bus drivers are not able to use them.
Differential Revision: https://reviews.freebsd.org/D6632
This trips me up whenever I'm fooling around with partially supported
NICs that fail to fully attach or initialise - the firmware gets loaded
and references, but something fails - and the firmware references
aren't cleaned up.
After perusing the PHY-LP code (don't ask why; honest) I discovered that
it /has/ 5GHz support - but it's not ever used. I found one NIC - a
BCM4312 w/ pci id 0x4315 - which advertised dual-band PHY-LP support.
Turns out it works.
Whilst here, move up the support bit logging code so I can use it
to debug this.
Tested:
* BCM4312 (pci id 0x4315); 5GHz STA operation
On Medford, licenses are required to enable RX and event cut through and to
disable RX batching. To avoid the need for the driver to make decisions based on
the licensing state, the MC_CMD_INIT_EVQ has been extended to allow us to leave
the decision to the firmware. If the adapter is licensed for low-latency use,
the firmware will choose the optimal settings for latency, otherwise it will use
the best settings for throughput.
For Huntington we still need to choose the settings ourselves.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6717
This seems to make 5G work better.
It doesn't fix powersave handling though, that still sees the PHY get
stuck during initial calibration and everything goes pear shaped.
I'll look into that later.
Tested:
* QCAFN222 NIC, STA mode, 5GHz
Obtained from: Linux ath9k
Turns out I wasn't even initialising or programming a lot of stuff
for the AR9462 2.1 chip. Oops.
This mostly gets it working. powersave scan results in some pretty
hilarious NFcal hangs and I don't see beacons reliably.
There are still some xlna gain tables missing that ath9k has; I'll
follow up with some fixes and then see if the QCAFN222 NIC I have
tests this path.
Tested:
* QCAFN222 NIC, STA mode, 2GHz and 5GHz
the graphics drivers can benefit from access to the lid handle for querying and getting notifications
Submitted by: kmacy
Differential Revision: https://reviews.freebsd.org/D6643
Add support for fetching SPROM data from OTP on chipsets with an
IPX OTP controller (including the BCM43225).
This integrates the NVRAM data source into the chipc_caps capability
structure, and adds a sprom_offset field that can be used with OTP
to locate the SPROM image data (found within the general use
region, H/W subregion).
This also removes one of two duplicate parse error messages reported by
both the bhnd_sprom driver and the underlying SPROM parsing API.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6729
Now that bhnd(4) provides feature parity with the previous siba/mips
implementation, we can switch sentry5 over and begin lifting common
support code out for use across bhnd(4) embedded targets.
Changes:
- Fixed enumeration of siba(4) per-core address maps, required for
discovery of memory mapped chipc flash region on siba(4) devices.
- Simplified bhnd kernel configuration (dropped 'bhndbus' option).
- Replaced files.broadcom's direct file references with their
corresponding standard kernel options.
- Lifted out common bcma/siba nexus support, inheriting from the new
generic bhnd_nexus driver.
- Dropped now-unused sentry5 siba code.
- Re-integrated BCM into the universe build now that it actually compiles.
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6712
This adds support for serial (via SPI) and parallel (via CFI) flash
as found on BCM47xx/BCM53xx SoCs.
Submitted by: Michael Zhilin <mizhka@gmail.com>
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6250
- Correct IRQ lines for UART (to fix IRQ lookup in future)
- Check device unit in resource assignment during chipc_add_child
- If chipc hint->size is RM_MAX_END, resource end should be same as window end
- Clear reference from resource list entry to resource in case of resource release
- Add CHIPC_GET_CAPS implementation
- Correct chipc flash constants (to be unshifted)
- Default implementation of get_attach_type should iterate over device tree
- Add default implementation for BHND_CHIPC_GET_CAPS usable by chipc grandchildren
Submitted by: Michael Zhilin <mizhka@gmail.com>
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D6584
It turns out that <machine/param.h> actually defines a macro under this
name, even when we're not in kernelspace. This causes us to suppress
some macro definitions that are used by userspace apps.
PR: 210026
Reported by: jbeich@
MFC after: 2 weeks
PowerPC64 has two different ABIs, neither of which is elf64_freebsd_sysvec.
Using sysent and freebsd32_sysent achieves the same effect.
X-MFC-With: r301130
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
When the low-latency firmware variant is running, it is reported as not
being capable of batching RX events, but it can still do so if the
FORCE_EV_MERGING flag is set on an RXQ. Therefore we need to handle
batched RX events even if the capability isn't set.
If this bug is fixed in the firmware such that the capability is set
even when running the low-latency firmware variant, it will almost
always be reported so I don't think we lose much by removing the check.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6705
This also adjusts the timer values used to match the Linux net
driver implementation:
a) non-zero time intervals should result in at least one quantum
b) timer load/reload values are only zero biased for Falcon/Siena
Submitted by: Andy Moreton <amoreton at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D6704
code uses the GetTime function from the Runtime Service, however this has
been shown to not return a useable time on many arm64 UEFI implementations.
Reviewed by: jhb, smh
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D6709
BAR size to 1MB. According to Xeon v3 specifications and my tests, that
size register is write-once and so not writeable after BIOS written it.
Instead of that, make the code work with BAR of any sufficient size,
properly calculating offset within its base. It also simplifies the code.
Discussed with: cem
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
NTB_MSIX_RECEIVED status, before making upper layers overwrite it.
This is not completely perfect, but now it works better then before.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
This breaks cross-building with WITH_META_MODE since it will rebuild
'build-tools' during the 'everything' phase.
A more proper fix is coming to bmake to implicitly require .META unless
.NOMETA (and other restrictions) are in place.
Improvements after r301220.
Bus space methods are not called so simple pmap_mapdev will suffice.
Use OF_getencprop to get buffer with already converted endianess.
Pointed out by: ian
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Reduce number of iterations used for calibrating ICR read loop. The
new number of iteration still gives the same ICR latency as before,
tested on Intel SandyBridge and Haswell machines, and on AMD. But it
significantly reduces the unneeded pause on boot in some VMs, from ~10
secs to less then 1 sec. It was reported to occur in bhyve on AMD
host.
Reported and tested by: avg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This is a followup to r300131.
A filesystem's root vnode can be reached not only through VSF_ROOT, but
by other means as well. For example, via a dot-dot lookup.
Also, a root vnode can get reclaimed and then re-created. For these
reasons it was insufficient to clear VV_ROOT flag from a root vnode of a
snapshot mounted under .zfs in zfsctl_snapdir_lookup().
So, now we set the flag in zfs_znode_sa_init() only if a vnode
represent a root of a filesystem or a standalone snapshot.
That is, the flag is not set for snapshots mounted under .zfs.
MFC after: 2 weeks
It could happen in an unlikely case that we fail to lock the root vnode
with requested flags (which appear to never include LK_NOWAIT).
MFC after: 1 week
Add accessor functions to toggle the state per VNET.
The base system (vnet0) will always enable itself with the normal
registration. We will share the registered protocol handlers in all
VNETs minimising duplication and management.
Upon disabling netisr processing for a VNET drain the netisr queue from
packets for that VNET.
Update netisr consumers to (de)register on a per-VNET start/teardown using
VNET_SYS(UN)INIT functionality.
The change should be transparent for non-VIMAGE kernels.
Reviewed by: gnn (, hiren)
Obtained from: projects/vnet
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D6691
The current error path in case of failure during attach/initialization is
not correct and leaves blkback in a stuck state. This is due to blkback
waiting for blkfront to switch to state XenbusStateClosed, but if blkfront
never attached (because the guest is not even started) it cannot possibly
make it to that state.
Instead just wait for the frontend to be in a state different than
XenbusStateConnected in order to proceed with the shutdown. Also, it is
wrong to call xbb_detach directly because it destroys the lock which can
still be used by xbb_frontend_changed.
Sponsored by: Citrix Systems R&D
Hotplug scripts are needed in order to use fancy disk configurations in xl,
like iSCSI disks. The job of hotplug scripts is to locally attach the disk
and present it to blkback as a block device or a regular file.
This change introduces a new xenstore node in the blkback hierarchy, called
"physical-device-path". This is a straigh replacement for the "params" node,
which was used before.
Hotplug scripts will need to read the "params" node, perform whatever
actions are necessary and then write the "physical-device-path" node. The
hotplug script is also in charge of detaching the disk once the domain has
been shutdown.
Sponsored by: Citrix Systems R&D
