In the Neoverse N1 SDP PCIe driver we need to map a page shared
between the firmware and the kernel. Previously we would use
pmap_kenter for this, however as this is not standardised between
architectures switch to the common pmap_qenter.
While here fix the error handling code to clean up on failure.
Reviewed by: br
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28890
Ensure that we not only block on some interfaces, but also forward on
some. Without the previous commit we wound up discarding on all ports,
rather than only on the ports needed to break the loop.
MFC after: 1 week
Sponsored by: Orange Business Services
Differential Revision: https://reviews.freebsd.org/D28917
Despite the comment to the contrary neither pf nor carp use
in_addmulti(). Nothing does, so get rid of it.
Carp stopped using it in 08b68b0e4c
(2011). It's unclear when pf stopped using it, but before
d6d3f01e0a (2012).
Reviewed by: bz@, melifaro@
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D28918
Make sure PD_KILL isn't passed to do_jail_attach, where it might end
up trying to kill the caller's prison (even prison0).
Fix the child jail loop in prison_deref_kill, which was doing the
post-order part during the pre-order part. That's not a system-
killer, but make jails not always die correctly.
MIPS BERI boot loader is built with -mno-abicalls and -fno-pic
so prevent adding PIE-related build flags.
Fix build after 9a227a2fd6 ("Enable PIE by default on 64-bit architectures")
Obtained from: Semihalf
Sponsored by: Stormshield
Using makefs instead reduces the privileges needed to build VM images,
simplifies the script (no need to copy files to a fresh image at the end),
and improves portability by allowing generation of cross-endian images.
As a result of the last, this patch also adds support for generation of
powerpc64 and powerpc64le VM images.
No other changes to the output. Tested and working for both amd64 and
powerpc64 targets.
Reviewed by: gjb
Differential Revision: https://reviews.freebsd.org/D28912
Commit 6dd69f0064 ("iflib: introduce isc_dma_width")
failed to build on powerpc due to implicit type conversion
error. Fix that.
Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The int in the argument to the ternary triggered -Wint-in-bool-context
from gcc. Upstream linux has a larger and more entangled patch,
12f727721eee61b3d19dedb95cb893b2baa9fe41, which doesn't apply cleanly.
When we eventually sync that, we can just drop this change.
Reviewed by: hselasky, imp, kib
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D28762
Get rid of db_look_char because it's not compatible with db_get_line().
This fixes the following issue:
db> script lockinfo=show alllocks
db> run lockinfo
db:0:lockinfo> how alllocks
No such command; use "help" to list available commands
Reported by: markj
Reviewed by: markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D28725
db_cmd_match had an even/odd bug, where if a third command was partially
matched (or any odd number greater than one) the search result would be
set back from CMD_AMBIGUOUS to CMD_FOUND, causing the last command in
the list to be executed instead of failing the match.
Reported by: mlaier
Reviewed by: markj, mlaier, vangyzen
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D28659
This KASSERT is overzealous because of the following race condition:
1) A managed page which is currently in PQ_LAUNDRY is freed.
vm_page_free_prep calls vm_page_dequeue_deferred()
The page state is:
PQ_LAUNDRY, PGA_DEQUEUE|PGA_ENQUEUED
2) The laundry worker comes around and pick up the page and calls
vm_pageout_defer(m, PQ_LAUNDRY, true) to check if page is still in the
queue. We do a vm_page_astate_load and get
PQ_LAUNDRY, PGA_DEQUEUE|PGA_ENQUEUED
as per above.
3) The laundry worker is pre-empted and another thread allocates our page
from the free pool. For example vm_page_alloc_domain_after calls
vm_page_dequeue() and sets VPO_UNMANAGED because we are allocating for
an OBJT_UNMANAGED object.
The page state is:
PQ_NONE, 0 - VPO_UNMANAGED
4) The laundry worker resumes, and processes vm_pageout_defer based on the
stale astate which leads to a call to vm_page_pqbatch_submit, which will
trip on the KASSERT.
Submitted by: mlaier
Reviewed by: markj, rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D28563
This patch adds Position Independent Executables (PIE)
flags for building OS. It allows to enable the ASLR
feature based only on the sysctl knobs, without
need to rebuild the image. Tests showed that
no problems with stability / performance degradation
were seen when using PIEs with ASLR disabled.
The change is limited only for 64-bit architectures.
Use bsd.opts.mk instead of the src.opts.mk in order
to satisfy all build dependencies related to MK_PIE.
Reviewed by: emaste, imp
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D28328
Bootloaders for powerpc are not built as position independent
code. Since bsd.prog.mk is used for building, when PIE is enabled,
the PIE flags are added and that causes the build to fail.
Adding MK_PIE=no stops bsd.prog.mk from adding PIE specific flags.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: emaste
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D28893
When performing buildworld for MIPS with PIE enabled, the build fails
with "position-independent code requires '-mabicalls'" message.
-mno-abicalls and -fno-pic flags are explicitly set in MIPS ubldr
makefile, so to work around this problem, set MK_PIE=no for MIPS
ubldr.
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Reviewed by: emaste
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D28370
Some DMA controllers are unable to address the full host memory space
and are instead limited to a subset of address range (e.g. 48-bit).
Allow the driver to specify the maximum allowed DMA addressing width
(in bits) for the NIC hardware, by introducing a new field in
if_softc_ctx.
If said field is omitted (set to 0), the lowaddr of DMA window bounds
defaults to BUS_SPACE_MAXADDR.
Submitted by: Artur Rojek <ar@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Differential Revision: https://reviews.freebsd.org/D28706
with the semantic following C11 signal_fence, that is, it establishes
ordering between its place and any interrupt handler executing on the
same CPU.
Reviewed by: markj, mjg, rlibby
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28909
Make the pwm_backlight module depend on backlight, so it
has access to the backlight interface symbols. Otherwise you'll
get an error like:
link_elf: symbol backlight_get_info_desc undefined
Signed-off-by: Brett Mastbergen <brett.mastbergen@gmail.com>
MFC after: 3 days
PR: 253765
This partition type can be used to boot some PowerKVM VMs. We don't
support it well because of some limitations in SLOF, but it's worth at
least have feature parity in geom and mkimg.
iflib_rxeof() was counting everything twice. This was introduced when
pfil hooks were added to the iflib receive path. We want to count rx
packets/bytes before the pfil hooks are executed, so remove the counter
adjustments that are executed after.
PR: 253583
Reviewed by: gallatin, erj
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28900
softdep_prealloc() must be called to ensure enough journal space is
available, before ffs_extwrite(). Also it must be done before taking
ffs_lock_ea(), because it calls ffs_syncvnode(), potentially dropping
the vnode lock.
Reviewed by: mckusick
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
ffs_lock_ea is after the vnode lock, so vnode must not be relocked under
lock_ea. Move ffs_truncate() call in ffs_close_ea() after the lock_ea is
dropped, and only truncate to length zero, since this is the only mode
supported by ffs_truncate() for EAs. Previously code did truncation and
then write.
Zero the part of the ext area that is unused, if truncation is due but not
done because ea area is not zero-length.
Reviewed by: mckusick
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Do it in ffs_write(), where we can gracefuly handle relock and its
consequences. In particular, recheck the v_data to see if the vnode
reclamation ended, and return EBADF when we cannot proceed with the
write.
Reviewed by: mckusick
Reported by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
instead of DOINGSOFTDEP(). The softdep_prealloc() function does nothing
in SU case.
Note that the call should be safe with regard to the vnode relock,
because it is called with MNT_NOWAIT, which does not descend into fsync.
Reviewed by: mckusick
Tested by: pho
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
77e1ccbee3 introduced parallel execution
of rc. It separated groups with line feeds (\n) and elements within
groups using spaces. This is a natural separation due to rcorder
using spaces and lines to separate elements within groups with groups
of services separated by line feeds.
77e1ccbee3 parses the output from rcorder
by setting $IFS. However it failed to reset $IFS to default ' \t\n'
prior to calling find_local_scripts_new(), causing find_local_scripts_new()
to fail parsing $local_startup for site-specific local rc scripts, i.e.
${LOCALBASE}/etc/rc.d. This caused daemons from ports and packages such
as postfix, dovecot, nut, and others in ${LOCALBASE} not to be started.
PR: 249192
MFC after: 3 week
X-MFC with: 77e1ccbee3
These images only ever worked on Apple Powermacs, which are now a very
old platform, and did so only for a very loose definition of "worked"
(they booted on a small subset of supported machines). Moreover, all
the machines they *did* boot on also would boot from a memstick made
by dd'ing an CD image to a flash drive. Since a flash drive prepared
in this way would also boot all the newer systems we support, the
memstick images were strictly less functional than the CD images, even
for booting from memory sticks.
Reviewed by: jhibbits
MFC after: 1 week
The tracker flags need to be loaded only after the tracker is removed
from its per-CPU queue. Otherwise, readers may fail to synchronize with
pending writers attempting to propagate priority to active readers, and
readers and writers deadlock on each other. This was observed in a
stable/12-based armv7 kernel where the compiler had reordered the load
of rmp_flags to before the stores updating the queue.
Reviewed by: rlibby, scottl
Discussed with: kib
Sponsored by: Rubicon Communications, LLC ("Netgate")
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28821
The commit below added parallel service startup, and it needs to be
documented, so people know about it.
PR: 249192
MFC with: 77e1ccbee3
Reviewed by: yuripv
Differential Revision: https://reviews.freebsd.org/D28898
Per hier(7), the ESP will be mounted at /boot/efi. On UFS systems,
any existing ESP will be reused and mounted there; otherwise, a new one
will be made. On ZFS systems, space for an ESP is allocated on all disks
in the root pool, but only the partition actually used to boot is set up
and mounted.
This makes future upgrades of the EFI loader easier (upgrade scripts can
just change /boot/efi) and also greatly simplifies the parts of the
installer involved in initialization of the ESP. It also makes the
installer's behavior correspond to the documentation in hier(7).
Reviewed by: imp, tsoome
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D28897
Add it to the x86 GENERIC and MINIMAL kernels
Sponsored by: Ampere Computing LLC
Submitted by: Klara Inc.
Reviewed by: rpokala
Differential Revision: https://reviews.freebsd.org/D28738
This forces the compiler to emit calls to libm functions, instead of
possibly substituting pre-calculated results at compile time, which
should help to actually test those functions.
Reviewed by: emaste, arichardson, ngie
Differential Revision: https://reviews.freebsd.org/D28577
MFC after: 3 days
ipmi_ssif will `smbus_request_bus()` to do multiple smbus requests
(which requests the iicbus), and then here in `bread()` we also need to
request the bus because `bread()` takes multiple transactions.
This causes deadlock as it's waiting for the bus it already has without
`IIC_RECURSIVE`.
Sponsored by: Ampere Computing LLC
Submitted by: Klara Inc.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D28742
Some SATA drives have 'config' set to 0 in the identify block. Rather than rely
on it, use the strings windows uses to display the drive since they are supposed
to be space padded and will always be non-zero.
All supported platforms support thread-local vars and __thread.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28796
We now live in the world of git, and release(7) should reflect that.
As of the commit referenced below, release images also no longer
include (stale) documentation, as the documentation has moved to
AsciiDoctor. This means that a few environment variables no longer
make sense, so remove them from their sections and mention them in
the compatibility section instead.
While here, also pet mandoc.
PR: 253615
MFC after: 3 days
MFC with: f61e92ca5a release: permanently remove the 'reldoc'
target and associates
Reviewed by: gjb, lwhsu, yuripv
Differential Revision: https://reviews.freebsd.org/D28881
