r279248 unconditionally installed BSD.debug.dist for ease-of-developer-use.
Restore the previous behavior.
While here, add a comment to note that this is intentional to avoid accidental
future removal.
MFC after: 2 months
MFC with: r321444
This fixes 'make cleandir' to use the same ordering as 'make cleanobj'.
Meaning that SUBDIR will be recursed before the current directory is
handled. This avoids an 'rm -rf /usr/obj/usr/src/lib/libc' while
a child 'rm -rf /usr/obj/usr/src/lib/libc/tests' is being ran next,
or even removing the current directory and then recursing into a child
and using the 'missing OBJDIR' logic to remove files rather than the
directory.
The most ideal ordering here would be for 'cleanobj' and 'cleandir' to
simply remove the .OBJDIR and then not recurse at all. This is only
safe if it is guaranteed that all children directories have no orphaned
files in their source checkout and are only using obj directories. This
is usually safe from the top-level build targets and when using
WITH_AUTO_OBJ. Improving the build for those cases is coming.
Reported by: cperciva, scottl
X-MFC-With: r321427
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
"make distribution".
This also fixes the fact that BSD.debug.dist was being installed if/when
${MK_DEBUG_FILES} != "no" before this commit.
MFC after: 2 months
This prevents situations with -DNO_CLEAN from finding stale headers or
libraries in places that no longer exist or have moved. It avoids
the need to remove all of WORLDTMP by reusing what we already know
is obsolete.
MFC after: 1 month
Sponsored by: Dell EMC Isilon
The files are only ever generated to .OBJDIR, not to WORLDTMP (as a
sysroot) and are only ever included from a compilation. So using
a beforebuild target here removes the file before the compilation
tries to include it.
MFC after: 2 months
X-MFC-With: r321369
libarchive may limit a single archive_write_data call to handling
0x7fffffff bytes. Add a loop to handle partial writes.
Reviewed by: kib, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D11715
and keepalive in the sysctl MIB. Provide tunables to change some of
these parameters. These are supposed to be setup by the firmware so
these tunables are for experimentation only.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
clang 4.0.0. Otherwise, these can get included before the two newly
generated ones (which are different) for clang 5.0.0.
Reported by: Mark Millard
MFC after: 2 months
X-MFC-With: r321369
- Only recurse on cleanobj/cleandir if there is no .OBJDIR being used.
If we don't recurse then bsd.obj.mk will just rm -rf the OBJDIR dir.
- When recursing on cleanobj/cleandir don't remove dependfiles/dirs
redundantly from the child and main processes. Meaning '.depend', and
'tags', and '.depend.*' will now only be removed from the main
process.
- Stop recursing on 'cleandepend' since the main process can handle
removing all files via the default glob patterns in CLEANDEPENDFILES.
- This reverts r288201, by readding recursion on 'cleanobj', due to
r291635 changing how bsd.subdir.mk handles recursion.
This is primarily targeting ESTALE NFS errors from rm(1) during a
buildworld but is also a performance optimization as both issues fixed
were redundant anyway.
Reported by: cperciva, scottl
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
"leaf" functions for alloc, free, and fill. After the change, the interface
functions call "meta" unconditionally, and the "meta" functions recur
unconditionally in looping over their descendants. The "meta" functions
start with a validity test, and then a test for the "leaf" case, before
falling into the general recursive case. This simplifies and shrinks the
code, and, for "free" and "fill" moves panic tests that check the same meta
node repeatedly in a loop to a place that will have each node tested once.
Remove irrelevant null checks from blist_free and blist_fill.
Make the code that initializes a meta node the same in blist_meta_alloc and
blist_meta_fill.
Parenthesize return expressions in blst_meta_fill.
Submitted by: Doug Moore <dougm@rice.edu>
MFC after: 1 week
are _two_ options that control its behaviour wrt child processes; slightly
improve the example[1], and add Xrefs.
Discussed with: wblock [1]
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
linking the lldb executable in some cases. In particular, when the
-ffunction-sections -fdata-sections options are turned off, or
ineffective.
Reported by: Shawn Webb, Mark Millard
MFC after: 2 months
X-MFC-With: r308421
Also switch the logic to enable this for any non-lld linker, since
filter library support is fairly simple and is very likely supported
by any other linker capable of linking the FreeBSD base system.
MFC after: 2 months
MFC with: r321369
Sponsored by: The FreeBSD Foundation
This status will be reported if the backend NIC is wireless; it's not
useful. Due to the high frequency of the reporting, this could be
pretty annoying; ignore it.
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11651
The VF-HN map will be used later on to implement "transparent VF".
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11618
ifnet_arrival_event may not be adequate under certain situation; e.g.
when the LLADDR is needed. So the ethernet ifattach event is announced
after all necessary bits are setup.
MFC after: 3 days
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11617
Most realtime clocks store the year as 2 BCD digits. Some add a century bit
to extend the range another hundred years. Every clock driver has its own
code to determine the century and pass a full year value to clock_ct_to_ts().
Now clock drivers can just convert BCD to bin and store the result in the
clocktime struct and let the common code figure out the century. Clocks
with a century bit can just add 100 to year if the century bit is on.
doesn't seem to have one. This lets the driver recover automatically
from incomplete firmware upgrades (panic, reboot, power loss, etc. in
the middle of an upgrade).
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision discusses the benefits of this change.)
Add a function, vm_reserv_to_superpage(), that returns the superpage
containing the specified base page.
Reviewed by: kib, markj
Tested by: pho
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D11556
sdhci(4), mmc(4) and mmcsd(4). For the most part, this consists of:
- Correcting and extending the infrastructure for negotiating and
enabling post-DDR52 modes already added as part of r315598. In
fact, HS400ES now should work as well but hasn't been activated
due to lack of corresponding hardware.
- Adding support executing standard SDHCI initial tuning as well
as re-tuning as required for eMMC HS200/HS400 and the fast UHS-I
SD card modes. Currently, corresponding methods are only hooked
up to the ACPI and PCI front-ends of sdhci(4), though. Moreover,
sdhci(4) won't offer any modes requiring (re-)tuning to the MMC/SD
layer in order to not break operations with other sdhci(4) front-
ends. Likewise, sdhci(4) now no longer offers modes requiring the
set_uhs_timing method introduced in r315598 to be implemented/
hooked up (previously, this method was used with DDR52 only, which
in turn is only available with Intel controllers so far, i. e. no
such limitation was necessary before). Similarly for 1.2/1.8 V VCCQ
support and the switch_vccq method.
- Addition of locking to the IOCTL half of mmcsd(4) to prevent races
with detachment and suspension, especially since it's required to
immediately switch away from RPMB partitions again after an access
to these (so re-tuning can take place anew, given that the current
eMMC specification v5.1 doesn't allow tuning commands to be issued
with a RPMB partition selected). Therefore, the existing part_mtx
lock in the mmcsd(4) softc is additionally renamed to disk_mtx in
order to denote that it only refers to the disk(9) half, likewise
for corresponding macros.
On the system where the addition of DDR52 support increased the read
throughput to ~80 MB/s (from ~45 MB/s at high speed), HS200 yields
~154 MB/s and HS400 ~187 MB/s, i. e. performance now has more than
quadrupled compared to pre-r315598.
Also, with the advent of (re-)tuning support, most infrastructure
necessary for SD card UHS-I modes up to SDR104 now is also in place.
Note, though, that the standard SDHCI way of (re-)tuning is special
in several ways, which also is why sending the actual tuning requests
to the device is part of sdhci(4). SDHCI implementations not following
the specification, MMC and non-SDHCI SD card controllers likely will
use a generic implementation in the MMC/SD layer for executing tuning,
which hasn't been written so far, though.
However, in fact this isn't a feature-only change; there are boards
based on Intel Bay Trail where DDR52 is problematic and the suggested
workaround is to use HS200 mode instead. So far exact details are
unknown, however, i. e. whether that's due to a defect in these SoCs
or on the boards.
Moreover, due to the above changes requiring to be aware of possible
MMC siblings in the fast path of mmc(4), corresponding information
now is cached in mmc_softc. As a side-effect, mmc_calculate_clock(),
mmc_delete_cards(), mmc_discover_cards() and mmc_rescan_cards() now
all are guaranteed to operate on the same set of devices as there no
longer is any use of device_get_children(9), which can fail in low
memory situations. Likewise, mmc_calculate_clock() now longer will
trigger a panic due to the latter.
o Fix a bug in the failure reporting of mmcsd_delete(); in case of an
error when the starting block of a previously stored erase request
is used (in order to be able to erase a full erase sector worth of
data), the starting block of the newly supplied bio_pblkno has to be
returned for indicating no progress. Otherwise, upper layers might
be told that a negative number of BIOs have been completed, leading
to a panic.
o Fix 2 bugs on resume:
- Things done in fork1(9) like the acquisition of an SX lock or the
sleepable memory allocation are incompatible with a MTX_DEF taken.
Thus, mmcsd_resume() must not call kproc_create(9), which in turn
uses fork1(9), with the disk_mtx (formerly part_mtx) held.
- In mmc_suspend(), the bus is powered down, which in the typical
case of a device being selected at the time of suspension, causes
the device deselection as part of the bus acquisition by mmc(4) in
mmc_scan() to fail as the bus isn't powered up again before later
in mmc_go_discovery(). Thus, power down with the bus acquired in
mmc_suspend(), which will trigger the deselection up-front.
o Fix a memory leak in mmcsd_ioctl() in case copyin(9) fails. [1]
o Fix missing variable initialization in mmc_switch_status(). [2]
o Fix R1_SWITCH_ERROR detection in mmc_switch_status(). [3]
o Handle the case of device_add_child(9) failing, for example due to
a memory shortage, gracefully in mmc(4) and sdhci(4), including not
leaking memory for the instance variables in case of mmc(4) (which
might or might not fix [4] as the latter problem has been discovered
independently).
o Handle the case of an unknown SD CSD version in mmc_decode_csd_sd()
gracefully instead of calling panic(9).
o Again, check and handle the return values of some additional function
calls in mmc(4) instead of assuming that everything went right or mark
non-fatal errors by casting the return value to void.
o Correct a typo in the Linux IOCTL compatibility; it should have been
MMC_IOC_MULTI_CMD rather than MMC_IOC_CMD_MULTI.
o Now that we are reaching ever faster speeds (more improvement in this
regard is to be expected when adding ADMA support to sdhci(4)), apply
a few micro-optimizations like predicting mmc(4) and sdhci(4) debugging
to be off or caching erase sector and maximum data sizes as well support
of block addressing in mmsd(4) (instead of doing 2 indirections on every
read/write request for determining the maximum data size for example).
Reported by: Coverity
CID: 1372612 [1], 1372624 [2], 1372594 [3], 1007069 [4]
* Add in the hints needed for AR933x ath(4) support - this is the nicer way
that allows ath to be a module;
* ATH_EEPROM_FIRMWARE is also required for all AR933x chipsets.
Tested:
* Carambola2, AR933x
add support for explicitly requesting that pmap_enter() create a 2MB page
mapping. (Essentially, this feature allows the machine-independent layer to
create superpage mappings preemptively, and not wait for automatic promotion
to occur.)
Export pmap_ps_enabled() to the machine-independent layer.
Add a flag to pmap_pv_insert_pde() that specifies whether it should fail or
reclaim a PV entry when one is not available.
Refactor pmap_enter_pde() into two functions, one by the same name, that is
a general-purpose function for creating PDE PG_PS mappings, and another,
pmap_enter_2mpage(), that is used to prefault 2MB read- and/or execute-only
mappings for execve(2), mmap(2), and shmat(2).
Submitted by: Yufeng Zhou <yz70@rice.edu> (an earlier version)
Reviewed by: kib, markj
Tested by: pho
MFC after: 10 days
Differential Revision: https://reviews.freebsd.org/D11556
superpage all belong to the same object. To date, that check has not been
needed, but upcoming changes require it. (See the Differential Revision.)
Reviewed by: kib, markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11556
It looks like the __acquire and __release macros are for the consumption
of static analysis tools and have no semantic effect. Transform the
definitions from constant expressions to empty statements in order to
avoid -Wunused-value from gcc.
Likewise avoid future warnings for __chk_{user,io}_ptr, but with a cast
to void, because it looks like some linux kernel code may use those in
expression contexts.
Reviewed by: hselasky, markj
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D11695
