At the moment rc.subr(8) supports the following required_* variables:
required_dirs, required_files, required_modules and required_vars.
This patch documents when every of those required_* variables is actually
processed (before or after running start_precmd).
Reviewed by: bcr
Approved by: krion (mentor, implicit), mat (mentor, implicit)
Sponsored by: Bally Wulff Games & Entertainment GmbH
Differential Revision: https://reviews.freebsd.org/D17895
The previous code required that the return type be a single word. This
allows it to be a pointer without using a typedef.
Update the return types of break, mmap, and shmat to be void * as
declared. This only effects systrace output in-tree, but can aid in
generating system call wrappers from syscalls.master.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17873
i/o into last_sector+N is handled differently for N==1 and N>1 cases to
accomodate that, so some other approach would be needed to fix DIOCGDELETE
ioctl(2).
This dynamic tag contains the location of the .rld_map section relative to
the location of the dynamic tag. For PIE MIPS binaries DT_MIPS_RLD_MAP can
not be used since it contains an absolute address. Without this change
GDB can not find the function program counters in other libraries and once
I apply this change I can successfully run info sharedlibraries again.
Reviewed By: kib
Differential Revision: https://reviews.freebsd.org/D17867
The disk access is validated by using partition table definitions, therefore
we have no need for if statements, just set the disk size.
Of course the partition table itself may be incorrect/inconsistent, but if
so, we are in trouble anyhow.
Differential Revision: https://reviews.freebsd.org/D17822
The BSD crtbegin/crtend code now builds on all architectures, however
further work is needed to check if it works correctly.
MFC with: r339738
Sponsored by: DARPA, AFRL
transaction translator will return a NAK. Ignore this message and
retry the complete split instead.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Also switch from int to size_t to keep portability.
Reviewed by: brooks
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D17795
'sync' is pretty heavy-handed, and is unnecessary for this use case. It's a
full barrier, which is applicable for all storage types. However,
atomic_load_acq_*() is only expected to operate on physical memory, not
device memory, so lwsync is sufficient (lwsync provides access ordering on
memory that is marked as Coherency Required and is not Write Through nor
Cache Inhibited). On 32-bit systems, this is a nop, since powerpc_lwsync()
is defined to use sync, as a workaround for a silicon bug in the Freescale
e500 core.
Different compilation units may otherwise get a different view of the
layout of struct tty depending on whether they include opt_printf.h.
This caused a blowup in the number of types defined in the kernel's
CTF file after r339468; thanks to dim@ for bisecting down to that
revision.
PR: 232675
Reported by: dim
Reviewed by: cem (previous version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17877
Prior to this patch, nfs_advlock() did NFSVOPUNLOCK(); return (error);
in many places. This patch replaces these code sequenences with a "goto out;"
and does the NFSVOPUNLOCK(); return (error); at the end of the function
in order to make the vnode locking simpler.
This patch does not change the semantics of nfs_advlock().
Suggested by: kib
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D17853
Previously attempts to read the MC region were failing since the
length was greater than 2^31.
Reviewed by: np
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D17857
These submaps are used for mapping pipe buffers and execv() argument
strings respectively, so there's no need for such mappings to have
execute permissions.
Reported by: jhb
Reviewed by: alc, jhb, kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17827
- Simplify the source dir specification, and update README
appropriately
- Drop the LC (doonly) processing, it's broken, and even if fixed, not
really useful
- Don't remove the target directories while installing new data as it
removes Makefile.depend which we don't manage; only rm the files we
are going to add/replace/delete instead
- Restrict adding bsd.endian.mk to colldef and ctypedef Makefiles, it's
not needed in other (text-only) categories
- GC unused scripts; they don't seem to be particularly helpful standalone
as well
Reviewed by: bapt
Approved by: kib (mentor, implicit)
Differential Revision: https://reviews.freebsd.org/D17858
Leave ptrace(2) alone for the moment as it's defined to take a caddr_t.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17852
Building with a strict $PATH (without inheriting from the parent
environment) still causes build failures in some workflows/environemnts
that I have not yet tested.
I will try to bring this back once these issues have all been resolved
since it is actually extremely useful in tracking broken dependencies
and wrong assumptions about the build environemt.
Discussed With: brooks
This allows us to build the ubsan code added in r340189 into the kernel
with the KUBSAN option. This will report when undefined behaviour is
detected in the currently running kernel.
As it can be large, the kernel is 65MB on arm64, loader may not be able to
load the kernel on all architectures so is disabled by default for now.
Sponsored by: DARPA, AFRL
This imports revision 1.3 of common/lib/libc/misc/ubsan.c from NetBSD, the
micro-ubsan code. It is an implementation of the Undefined Behavior
Sanitizer runtime for use with recent clang and gcc.
The uubsan code will be used in a later commit to implement kubsan to help
find undefined behavior in the kernel.
Sponsored by: DARPA, AFRL
fully beyond the end of providers media. The only exception is made
for the zero length transfers which are allowed to be just on the
boundary. Previously, any requests starting on the boundary (i.e. next
byte after the last one) have been allowed to go through.
No response from: freebsd-geom@, phk
MFC after: 1 month
The linker's -z now flag sets the DF_BIND_NOW flag, which signals to the
runtime loader that all relocation processing should be performed at
process startup rather than on demand. In combination with lld's
default of enabling relro this causes the GOT to be made read-only when
the process starts, preventing straightforward GOT overwrite attacks.
Shawn Webb discovered a failure on HardenedBSD with BIND_NOW and ifunc
use, which resulted in my rtld fix in r340137. Add a BIND_NOW knob as
it is trivial to do so and is a useful ELF hardening feature. This
change is equivalent to HardenedBSD's but not identical as there are
other diffs/conflicts nearby.
Note that our ELF Tool Chain readelf does not currently decode the
DF_BIND_NOW flag - see PR232983.
Reviewed by: brooks
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17846
linux_ioctl_(un)register_handler that allows other driver modules to
register ioctl handlers. The ioctl syscall implementation in each Linux
compat module iterates over the list of handlers and forwards the call to
the appropriate driver. Because the registration functions have the same
name in each module it is not possible for a driver to support both 32 and
64 bit linux compatibility.
Move the list of ioctl handlers to linux_common.ko so it is shared by
both Linux modules and all drivers receive both 32 and 64 bit ioctl calls
with one registration. These ioctl handlers normally forward the call
to the FreeBSD ioctl handler which can handle both 32 and 64 bit.
Keep the special COMPAT_LINUX32 ioctl handlers in linux.ko in a separate
list for now and let the ioctl syscall iterate over that list first.
Later, COMPAT_LINUX32 support can be added to the 64 bit ioctl handlers
via a runtime check for ILP32 like is done for COMPAT_FREEBSD32 and then
this separate list would disappear again. That is a much bigger effort
however and this commit is meant to be MFCable.
This enables linux64 support in x11/nvidia-driver*.
PR: 206711
Reviewed by: kib
MFC after: 3 days
This is a valid case for the userland stack, where this fixes
two set-but-not-used warnings in this case.
Thanks to Christian Wright for reporting the issue.
Set commit properly for FreeBSD w/ overcommit.
When overcommit is enabled, commit needs to be set when doing mmap(). The
regression was introduced in f80c97e.
This fixes 'retain:true'.
Discussed with: jasone
Obtained from: Qi Wang <interwq at gwu dot edu>
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
It is only present on amd64/i386 systems which breaks buildworld on
other hosts. In fact there is no need to add it to the bootstrap tools
list since it is already included in the cross-tools phase.
However, for cross-tools it was only built if the host and target
architecture didn't match. After this change it is also built when we
are builtin with a strict $PATH.
Reported By: mmel
It produces incompatibility when rules listing is used again to
restore saved ruleset, because "ip6" keyword produces separate opcode.
The kernel already has the check and only IPv6 packets will be checked
for matching.
PR: 232939
MFC after: 3 days
In practice it is always initialized because nfreed must be positive
in order to trigger background laundering, but this isn't obvious.
CID: 1387997
MFC after: 1 week
- Use PH_loc.eight[1] as a general 'cflags' (Chelsio flags) field to
describe properties of a queued packet. The MC_RAW_WR flag
indicates an mbuf holding a raw work request. mbuf_cflags() returns
the current flags.
- Raw work request mbufs are allocated via alloc_wr_mbuf() which will
allocate a single contiguous range to hold the mbuf data. The
consumer can use mtod() to obtain the start of the work request and
write the required work request in the buffer. The mbuf can then be
enqueued directly to the txq via mp_ring_enqueue().
- Since raw work requests might potentially send arbitrary work
requests, only set the EQUIQ and EQUEQ bits on work requests that
support them such as the normal tunneled Ethernet packet work
requests.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D17811
Avoid using DELAY() since it can try to use spin locks on CPUs without
a P-state invariant TSC. For cpu_lock_delay(), always use the TSC if
it exists (even if it is not P-state invariant) to delay for a
microsecond. If the TSC does not exist, read from I/O port 0x84 to
delay instead.
PR: 228768
Reported by: Roger Hammerstein <cheeky.m@live.com>
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17851
This uses slightly simpler logic than the existing code by using the
full 64-bit counter and thus not having to worry about counter
overflow.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D17850
I missed this case when testing r340157. For now just keep
$PATH when we aren't bootstrapping a compiler so that the build
can find cc/c++/ld without an absolute path.
Reported by: yuripv
More time is still needed for ports to accommodate the migration to
capsicum.h.
The header was renamed in 2014 due to concerns about conflicts with with
a draft POSIX.1e capability.h header on other systems and there is (now)
no need for complex autoconf tests for both capability.h and capsicum.h.
Any supported Capsicum-capable system has capsicum.h.
Reported by: antoine
Sponsored by: The FreeBSD Foundation
Replace a call to DELAY(1) with a new cpu_lock_delay() KPI. Currently
cpu_lock_delay() is defined to DELAY(1) on all platforms. However,
platforms with a DELAY() implementation that uses spin locks should
implement a custom cpu_lock_delay() doesn't use locks.
Reviewed by: kib
MFC after: 3 days
