Commit Graph

2881 Commits

Author SHA1 Message Date
Tor Egge
82916a1126 ISA device drivers use the ISA source interrupt number in locations where
the low level interrupt handler number should be used.  Change
setup_apic_irq_mapping() to allocate low level interrupt handler X (Xintr${X})
for any ISA interrupt X mentioned in the MP table.

Remove an assumption in the driver for the system clock (clock.c) that
interrupts mentioned in the MP table as delivered to IOAPIC #0 intpin Y
is handled by low level interrupt handler Y (Xintr${Y}) but don't assume
that low level interrupt handler 0 (Xintr0) is used.

Don't allocate two low level interrupt handlers for the system clock.
Reviewed by:	NOKUBI Hirotaka <hnokubi@yyy.or.jp>
2000-01-04 22:24:59 +00:00
Poul-Henning Kamp
fb01c24c11 Be more careful about NOUDEV and NODEV.
Submitted by:	bde
2000-01-04 12:51:50 +00:00
Poul-Henning Kamp
6a77f60d4a Create a separate pps_offset variable to use for applying the
hardpps() produced offset component.  This is tested and behaved
stable with frequency offsets from -338.05 to +499.91 PPM.

Interestingly the machine I tested this on would fail if the clock
were slower than 14.3132 MHz whereas it was perfectly happy to run
at 16.384 MHz, in other words [-340PPM ... +14.4%]

Make pps_shift tweakable with sysctl.
2000-01-04 12:04:39 +00:00
Poul-Henning Kamp
b9effc8901 truss /usr/bin/su
login (or not if root)
	then exit the shell

truss will get stuct in tsleep

I dont know if this is correct, but it fixes the problem and
according to the commends in pioctl.h, PF_ISUGID is set when we
want to ignore UID changes.

The code is checking for when PF_ISUGID is not set and since it
never is set, we always ignore UID changes.

Submitted by:	Paul Saab <ps@yahoo-inc.com>
2000-01-03 14:26:47 +00:00
Poul-Henning Kamp
19c5221906 Don't use time_offset as a leaky bucket variable in hardpps(), this
resulted in vastly optimistic offset values reported to userland
(typically a factor 40+ too small).  Apart from that, the code had
two sign-bugs.

Apply the hardpps() phase with the right sign with a simply
scaling by integration interval.  (This may be too stiff at
long integration intervals, see below).

Allow pps_shiftmax to be reduced again.

Before this, the phase lock in hardpps() were broken, but due to
two bugs mostly cancelling out, it would end up basically working
with a large stochastic component.  Now it behaves as one would
expect: smooth and quiet.

It seems that pps_shiftmax above 7..9 somewhere makes the phaselock
too weak to hold onto random walk phase errors from a HP-105 OCXO,
which basically means that it is too weak for real-life use with
such integration times.  This is yet to be resolved.

Submitted to:	Prof. Dave "NTP" Mills.
Tested by:	Terje Mathisen <Terje.Mathisen@hda.hydro.com>
1999-12-29 14:39:24 +00:00
Peter Wemm
8b70d192e3 Remove vnode_if.sh - it's a perl script. This stayed around for a while
because bsd.kmod.mk is usually out of sync with kernel source.  However
bsd.kmod.mk has to be updated now because of the _KERNEL change so there
is no need to keep this (pre-repo copy) version around.
1999-12-29 05:37:14 +00:00
Peter Wemm
c447342094 Change #ifdef KERNEL to #ifdef _KERNEL in the public headers. "KERNEL"
is an application space macro and the applications are supposed to be free
to use it as they please (but cannot).  This is consistant with the other
BSD's who made this change quite some time ago.  More commits to come.
1999-12-29 05:07:58 +00:00
Mike Smith
736e4b67ae Actively limit the allocation of mbufs to NMBUFS/nmbufs and mbuf clusters
to NMBCLUSTERS/nmbclusters/kern.ipc.nmbclusters.

Add a read-only sysctl kern.ipc.nmbufs matching kern.ipc.nmbclusters.

Submitted by:	Bosko Milekic <bmilekic@dsuper.net>
1999-12-28 06:35:57 +00:00
Bruce Evans
654f6be1c8 Changed the type used to represent the user stack pointer from `long *'
to `register_t *'.  This fixes bugs like misplacement of argc and argv
on the user stack on i386's with 64-bit longs.  We still use longs to
represent "words" like argc and argv, and assume that they are on the
stack (and that there is stack).  The suword() and fuword() families
should also use register_t.
1999-12-27 10:42:55 +00:00
Bruce Evans
9f79feec16 Fixed some type mismatches. p_retval[0] in struct proc has type
register_t, so pointers to it must be passed around as `register_t *',
not as `int *'.  The type mismatches were non-benign on alphas, but
the broken code is normally only configured by LINT.
1999-12-27 10:22:09 +00:00
Brian Feldman
c2696359ab Correct an uninitialized variable use, which, unlike most times, is
actually a bug this time.

Submitted by:	bde
Reviewed by:	bde
1999-12-27 06:31:53 +00:00
Bruce Evans
f85bdfcc66 Removed unused includes.
Rumoved unused compatibility cruft for dup().  Using it today would just
break dup() on fd's >= 64.

Fixed some style bugs.
1999-12-26 14:07:43 +00:00
Bruce Evans
da211f5bf6 Use vfs_timestamp() instead of getnanotime() to set timestamps. This
fixee incoherency of pipe timestamps relative to file timestamps in
the usual case where getnanotime() is not used for the latter.  (File
and pipe timestamps are still incoherent relative to real time unless
the vfs_timestamp_precision sysctl is set to 2 or 3).
1999-12-26 13:04:52 +00:00
Doug Rabson
54ac5b9b76 * Set the devclass of a device before calling the probe method. This allows
device_printf() etc. to print something intelligible.
* Allow device_set_devclass(dev, 0) for clearing the devclass.
1999-12-24 16:21:15 +00:00
Bruce Evans
586453fee2 Fixed a cast of a pointer to an integer of a possibly different size.
Fixed casts of non-`void *' pointers to uintptr_t.  Fixed related
style bugs.  This file uses perfectly non-KNF formatting for casts.
1999-12-24 15:33:36 +00:00
Kirk McKusick
02b0085406 Prettyness police: Identify flags in b_xflags with BX_ to distinguish
them from flags in b_flags which are prefixed with B_
1999-12-22 03:11:04 +00:00
Alfred Perlstein
80ef02b65d regenerate after making getfh a standard syscall. 1999-12-21 20:21:48 +00:00
Alfred Perlstein
20883b0f10 make getfh a standard syscall instead of dependant on having
NFSSERVER defined, useful for userland fileservers that want to
use a filehandle type interface to the filesystem.

Submitted by: Assar Westerlund assar@stacken.kth.se
PR: kern/15452
1999-12-21 20:21:12 +00:00
Eivind Eklund
369dc8ceb8 Change incorrect NULLs to 0s 1999-12-21 11:14:12 +00:00
Matthew Dillon
8f95b97072 Reimplement buf_daemon / getnewbuf() interaction for dealing with
stressful situations.  buf_daemon now makes a distinction between
    being woken up and its sleep timing out, and as a consequence is now
    much better able to dynamically tune itself to its environment.

Reviewed by:	Alfred Perlstein <bright@wintelcom.net>
1999-12-20 20:28:40 +00:00
Eivind Eklund
6357e7b507 Make m_print const correct (avoids a warning) 1999-12-20 18:10:00 +00:00
Greg Lehey
580e7e5a0f If we fail to find init, print out the search path used. This helps
differentiate between one of three different scenarios:

1.  No init.
2.  Path to init munged by an incorrect loader configuration.
3.  Root file system not mounted.

Reviewed-by:  billf
1999-12-20 02:50:49 +00:00
Poul-Henning Kamp
1b4ce5ce9b Don't ignore return value from tsleep().
Spotted by:	charnier
1999-12-19 12:36:41 +00:00
Robert Watson
91f37dcba1 Second pass commit to introduce new ACL and Extended Attribute system
calls, vnops, vfsops, both in /kern, and to individual file systems that
require a vfsop_ array entry.

Reviewed by:	eivind
1999-12-19 06:08:07 +00:00
Robert Watson
ef351daa32 First pass commit to introduce new ACL and Extended Attribute system calls.
The second pass commit with all the supporting code will happen shortly
afterwards.

Reviewed by:	eivind
1999-12-19 05:54:46 +00:00
Eivind Eklund
d776d82c4d Since VOP_LOCK can be used to up and downgrade locks, it is not possible
to say anything about the lockstate before and after it.  Thus, change the
lockspec from U L U to ? ? ?.
1999-12-18 23:01:52 +00:00
Brian Feldman
2cfa173c50 Woops, I'm so sorry I forgot this! From the last mbuf.h change:
m_mballoc_wakeup() (inline) -> MMBWAKEUP() (macro)
	m_clalloc_wakeup() (inline) -> MCLWAKEUP() (macro)

Noticed by:	peter
1999-12-18 20:04:19 +00:00
Eivind Eklund
762e6b856c Introduce NDFREE (and remove VOP_ABORTOP) 1999-12-15 23:02:35 +00:00
Brian Feldman
6c54410230 Bug fix:
The variables "m_mclalloc_wid" and "m_mballoc_wid" were not in the
proper place.  They should have been in uipc_mbuf.c and have been global,
not in mbuf.h and local per each file that uses mbuf.h.

Sorta bug fix:
   In mbuf.h, the definitions of various things for KERNEL and not
KERNEL cases were very screwy.   This fixes all of that which I could
find.
1999-12-14 02:23:14 +00:00
Tor Egge
f52523701c Fix two problems with pipe_write():
1. Data written beyond end of pipe buffer, causing kernel memory corruption.

    - Check that space is still valid after obtaining the pipe lock.

    - Defer the calculation of transfer size until the pipe
      lock has been obtained.

    - Update the pipe buffer pointers while holding the pipe lock.

 2. Writes of size <= PIPE_BUF not always atomic.

    - Allow an internal write to span two contiguous segments,
      so writes of size <= PIPE_BUF can be kept atomic
      when wrapping around from the end to the start of the
      pipe buffer.

PR:		15235
Reviewed by:	Matt Dillon <dillon@FreeBSD.org>
1999-12-13 02:55:47 +00:00
Peter Wemm
6f77b2defc Use a seperate -c and -h mode. The vnode_if.c file is compiled only into
the kernel while the vnode_if.h header is a bunch of inlines to call the
code that is in the kernel. Generating the .h file on the fly is kinda
bogus because it has to match the one compiled into the kernel.

IMHO we should have kern/vnode_if.c and sys/vnode_if.h committed in the
tree but that's another battle.
1999-12-12 16:43:05 +00:00
Peter Wemm
cfdd238335 Put on asbestos suit and put a splcam() around the 'Mounting root from..'
message to stop it splitting.  Every single scsi machine I've seen seems
to reliably collide with this and it's rather annoying.
1999-12-12 16:34:43 +00:00
Peter Wemm
016fc47da3 The sysctl mod_xx hack is no longer required now that we have totally
dynamic sysctl registration.
1999-12-12 16:30:34 +00:00
Brian Feldman
f48b807fc0 This is Bosko Milekic's mbuf allocation waiting code. Basically, this
means that running out of mbuf space isn't a panic anymore, and code
which runs out of network memory will sleep to wait for it.

Submitted by:	Bosko Milekic <bmilekic@dsuper.net>
Reviewed by:	green, wollman
1999-12-12 05:52:51 +00:00
Matthew Dillon
3854a87ef3 Remove accidental pollution unrelated to previous commit. The issue
here is real but has not yet been discussed with Eivind.
1999-12-12 03:28:14 +00:00
Matthew Dillon
4f79d873c1 Add MAP_NOSYNC feature to mmap(), and MADV_NOSYNC and MADV_AUTOSYNC to
madvise().

    This feature prevents the update daemon from gratuitously flushing
    dirty pages associated with a mapped file-backed region of memory.  The
    system pager will still page the memory as necessary and the VM system
    will still be fully coherent with the filesystem.  Modifications made
    by other means to the same area of memory, for example by write(), are
    unaffected.  The feature works on a page-granularity basis.

    MAP_NOSYNC allows one to use mmap() to share memory between processes
    without incuring any significant filesystem overhead, putting it in
    the same performance category as SysV Shared memory and anonymous memory.

Reviewed by: julian, alc, dg
1999-12-12 03:19:33 +00:00
Eivind Eklund
6bdfe06ad9 Lock reporting and assertion changes.
* lockstatus() and VOP_ISLOCKED() gets a new process argument and a new
  return value: LK_EXCLOTHER, when the lock is held exclusively by another
  process.
* The ASSERT_VOP_(UN)LOCKED family is extended to use what this gives them
* Extend the vnode_if.src format to allow more exact specification than
  locked/unlocked.

This commit should not do any semantic changes unless you are using
DEBUG_VFS_LOCKS.

Discussed with:	grog, mch, peter, phk
Reviewed by:	peter
1999-12-11 16:13:02 +00:00
Peter Wemm
4537138981 Zap c_index() and c_rindex(). Bruce prefers these to implicitly convert
a const into a non-const as they do in libc.  I feel that defeating the
type checking like that quite evil, but that's the way it is.
1999-12-10 17:38:41 +00:00
Poul-Henning Kamp
2ac0d0a1f7 Make adjtime(2) adjust boottime so it doesn't cause non-monotonous
uptime.
1999-12-08 10:02:12 +00:00
Poul-Henning Kamp
e8452d59e3 Scan cdevs for potential root devices, rather than bdevs. 1999-12-08 10:01:18 +00:00
Poul-Henning Kamp
7d5961670c Remove BAD144 support, it has already been disabled for some time. 1999-12-08 09:33:00 +00:00
Mike Smith
9eec696993 Change the default poweroff delay from 0 to 5 seconds. This seems to be
adequate for the IDE disks that I have available for testing.  Most seem
to wait between 1 and 3 seconds before flushing their caches.

Add the ability to override the delay at compile time via the
undocumented option POWEROFF_DELAY.  The delay can still be set via
sysctl as it was originally implemented.
1999-12-07 04:35:37 +00:00
Poul-Henning Kamp
72dfe7a3d7 I always forget to check before I reboot a system, and while it
boots I try in vain to remember which month or even year this system
was last booted in.

Print out the uptime before rebooting, and give people like me
less (or more as it may be) to think about while the systems boots.
1999-12-06 22:35:51 +00:00
Peter Wemm
bb6a234e47 Put on my asbestos underwear and commit the patch that I posted to -arch
some time ago that changes kern.randompid from a boolean to a randomness
range for the next pid assigment.  Too high causes a lot of extra work
to scan for free pids, and too low merely wastes randomness entropy.  It's
still possible to select a completely random range by using PID_MAX (100k)
or -1 as a shortcut to mean "the whole range".
Also, don't waste randomness when doing a wraparound.
1999-12-06 11:13:50 +00:00
Luoqi Chen
91c28bfde0 User ldt sharing. 1999-12-06 04:53:08 +00:00
Matt Jacob
9efed284d5 correct incomplete last change 1999-12-03 09:10:04 +00:00
Matthew N. Dodd
fe0d408987 Remove the 'ivars' arguement to device_add_child() and
device_add_child_ordered().  'ivars' may now be set using the
device_set_ivars() function.

This makes it easier for us to change how arbitrary data structures are
associated with a device_t.  Eventually we won't be modifying device_t
to add additional pointers for ivars, softc data etc.

Despite my best efforts I've probably forgotten something so let me know
if this breaks anything.  I've been running with this change for months
and its been quite involved actually isolating all the changes from
the rest of the local changes in my tree.

Reviewed by:	peter, dfr
1999-12-03 08:41:24 +00:00
Nick Hibma
39e86a12aa Remove check for attached state.
sc = devclass_get_softc(devclass, unit);

doesn't return NULL during attach anymore, and produces the sc,
identical to (for devclass_get_unit(devclass, unit) != NULL that is):

   sc = device_get_softc(devclass_get_unit(devclass, unit));

Reviewed-by:   dfr
1999-12-02 16:30:21 +00:00
Archie Cobbs
1c38f2ea70 The functions m_copym() and m_copypacket() return read-only copies,
because in the case of mbuf clusters they only increment the reference
count rather than actually copying the data.

Add comments to this effect, and add a new routine called m_dup() that
returns a real, writable copy of an mbuf chain.

This is preliminary work required for implementing 'ipfw tee'.

Reviewed by:	julian
1999-12-01 22:31:32 +00:00
Brian Feldman
226420a464 Separate some common sysctl code into sysctl_find_oid() and calling
thereof.  Also, make the errno returns  _correct_, and add a new one
which is more appropriate.
1999-12-01 02:25:19 +00:00
Kirk McKusick
e9cc475851 Collect read and write counts for filesystems. This new code
drops the counting in bwrite and puts it all in spec_strategy.
I did some tests and verified that the counts collected for writes
in spec_strategy is identical to the counts that we previously
collected in bwrite. We now also get read counts (async reads
come from requests for read-ahead blocks). Note that you need
to compile a new version of mount to get the read counts printed
out. The old mount binary is completely compatible, the only
reason to install a new mount is to get the read counts printed.

Submitted by:	Craig A Soules <soules+@andrew.cmu.edu>
Reviewed by:	Kirk McKusick <mckusick@mckusick.com>
1999-12-01 02:09:30 +00:00
Peter Wemm
ebc49c5654 Don't make the ktrace hook in tsleep() deref a null curproc after a panic.
PR:		15169
Submitted by:	David Gilbert <dgilbert@velocet.ca>
1999-11-30 09:01:46 +00:00
Matthew N. Dodd
44a451ba24 Reduce code duplication.
Hopefully this clears up some confusion about the nature of
devclass_get_softc() vs. device_get_softc() as well.

The check against DS_ATTACHED remains as this is not
a change that modifies functionality.

Reviewed by:	Peter "in principle" Wemm
1999-11-30 07:06:03 +00:00
Matthew Dillon
245efbba4d Remove vfs_getrootfsid() function (a temporary hack added a few months
ago to make BOOTP work again).  It is no longer required by BOOTP and
    no longer used.
1999-11-29 22:25:36 +00:00
Poul-Henning Kamp
c464420c89 Report swapdevices as cdevs rather than bdevs.
Remove unused dev2budev() function.
1999-11-29 21:37:18 +00:00
Poul-Henning Kamp
38941f351c Remove the now unused chrtoblk() function. 1999-11-29 20:50:58 +00:00
Matthew Dillon
99e659dcfa Make BOOTP work again.
Submitted by:	Doug Ambrisko <ambrisko@whistle.com>
1999-11-29 18:51:04 +00:00
Poul-Henning Kamp
8f04f6c729 Add a bit of sanity checking and problem avoidance in case the
timecounter hardware is bogus.

This will produce a new warning "microuptime() went backwards"
and try to not screw up the process resource accounting.
1999-11-29 11:29:04 +00:00
Mike Smith
c0da4cacd0 Use the correct mounted-from path when allocating the root mount, if we know
what it is.

Be more correct in unbusying the mountpoint (especially before freeing it).

Remove support for mounting 'r' devices as root.  You don't mount 'r'
devices anywhere else, and they're going away anyway.

Submitted by:	bde
1999-11-28 22:20:18 +00:00
Dan Moschuk
ee3fd60126 Introduce OpenBSD-like Random PIDs. Controlled by a sysctl knob
(kern.randompid), which is currently defaulted off.  Use ARC4 (RC4) for our
random number generation, which will not get me executed for violating
crypto laws; a Good Thing(tm).

Reviewed and Approved by: bde, imp
1999-11-28 17:51:09 +00:00
Poul-Henning Kamp
ee072c08d0 Convert dumpon to work on character devices instead of block devices.
NB: You may need to change your /etc/rc.conf!
1999-11-28 16:25:17 +00:00
Bruce Evans
bdf423572e Scheduler fixes equivalent to the ones logged in the following NetBSD
commit to kern_synch.c:

----------------------------
revision 1.55
date: 1999/02/23 02:56:03;  author: ross;  state: Exp;  lines: +39 -10
Scheduler bug fixes and reorganization
* fix the ancient nice(1) bug, where nice +20 processes incorrectly
  steal 10 - 20% of the CPU, (or even more depending on load average)
* provide a new schedclk() mechanism at a new clock at schedhz, so high
  platform hz values don't cause nice +0 processes to look like they are
  niced
* change the algorithm slightly, and reorganize the code a lot
* fix percent-CPU calculation bugs, and eliminate some no-op code

=== nice bug === Correctly divide the scheduler queues between niced and
compute-bound processes. The current nice weight of two (sort of, see
`algorithm change' below) neatly divides the USRPRI queues in half; this
should have been used to clip p_estcpu, instead of UCHAR_MAX.  Besides
being the wrong amount, clipping an unsigned char to UCHAR_MAX is a no-op,
and it was done after decay_cpu() which can only _reduce_ the value.  It
has to be kept <= NICE_WEIGHT * PRIO_MAX - PPQ or processes can
scheduler-penalize themselves onto the same queue as nice +20 processes.
(Or even a higher one.)

=== New schedclk() mechansism === Some platforms should be cutting down
stathz before hitting the scheduler, since the scheduler algorithm only
works right in the vicinity of 64 Hz. Rather than prescale hz, then scale
back and forth by 4 every time p_estcpu is touched (each occurance an
abstraction violation), use p_estcpu without scaling and require schedhz
to be generated directly at the right frequency. Use a default stathz (well,
actually, profhz) / 4, so nothing changes unless a platform defines schedhz
and a new clock.  Define these for alpha, where hz==1024, and nice was
totally broke.

=== Algorithm change === The nice value used to be added to the
exponentially-decayed scheduler history value p_estcpu, in _addition_ to
be incorporated directly (with greater wieght) into the priority calculation.
At first glance, it appears to be a pointless increase of 1/8 the nice
effect (pri = p_estcpu/4 + nice*2), but it's actually at least 3x that
because it will ramp up linearly but be decayed only exponentially, thus
converging to an additional .75 nice for a loadaverage of one. I killed
this, it makes the behavior hard to control, almost impossible to analyze,
and the effect (~~nothing at for the first second, then somewhat increased
niceness after three seconds or more, depending on load average) pointless.

=== Other bugs === hz -> profhz in the p_pctcpu = f(p_cpticks) calcuation.
Collect scheduler functionality. Try to put each abstraction in just one
place.
----------------------------

The details are a little different in FreeBSD:

=== nice bug ===   Fixing this is the main point of this commit.  We use
essentially the same clipping rule as NetBSD (our limit on p_estcpu
differs by a scale factor).  However, clipping at all is fundamentally
bad.  It gives free CPU the hoggiest hogs once they reach the limit, and
reaching the limit is normal for long-running hogs.  This will be fixed
later.

=== New schedclk() mechanism ===  We don't use the NetBSD schedclk()
(now schedclock()) mechanism.  We require (real)stathz to be about 128
and scale by an extra factor of 2 compared with NetBSD's statclock().
We scale p_estcpu instead of scaling the clock.  This is more accurate
and flexible.

=== Algorithm change ===  Same change.

=== Other bugs ===  The p_pctcpu bug was fixed long ago.  We don't try as
hard to abstract functionality yet.

Related changes: the new limit on p_estcpu must be exported to kern_exit.c
for clipping in wait1().

Agreed with by:		dufault
1999-11-28 12:12:14 +00:00
Bruce Evans
f0ebe4973f Scheduler fixes equivalent to the ones logged in the following NetBSD
commit to kern_synch.c:

  ----------------------------
  revision 1.55
  date: 1999/02/23 02:56:03;  author: ross;  state: Exp;  lines: +39 -10
  Scheduler bug fixes and reorganization
  * fix the ancient nice(1) bug, where nice +20 processes incorrectly
    steal 10 - 20% of the CPU, (or even more depending on load average)
  * provide a new schedclk() mechanism at a new clock at schedhz, so high
    platform hz values don't cause nice +0 processes to look like they are
    niced
  * change the algorithm slightly, and reorganize the code a lot
  * fix percent-CPU calculation bugs, and eliminate some no-op code

  === nice bug === Correctly divide the scheduler queues between niced and
  compute-bound processes. The current nice weight of two (sort of, see
  `algorithm change' below) neatly divides the USRPRI queues in half; this
  should have been used to clip p_estcpu, instead of UCHAR_MAX.  Besides
  being the wrong amount, clipping an unsigned char to UCHAR_MAX is a no-op,
  and it was done after decay_cpu() which can only _reduce_ the value.  It
  has to be kept <= NICE_WEIGHT * PRIO_MAX - PPQ or processes can
  scheduler-penalize themselves onto the same queue as nice +20 processes.
  (Or even a higher one.)

  === New schedclk() mechansism === Some platforms should be cutting down
  stathz before hitting the scheduler, since the scheduler algorithm only
  works right in the vicinity of 64 Hz. Rather than prescale hz, then scale
  back and forth by 4 every time p_estcpu is touched (each occurance an
  abstraction violation), use p_estcpu without scaling and require schedhz
  to be generated directly at the right frequency. Use a default stathz (well,
  actually, profhz) / 4, so nothing changes unless a platform defines schedhz
  and a new clock.  Define these for alpha, where hz==1024, and nice was
  totally broke.

  === Algorithm change === The nice value used to be added to the
  exponentially-decayed scheduler history value p_estcpu, in _addition_ to
  be incorporated directly (with greater wieght) into the priority calculation.
  At first glance, it appears to be a pointless increase of 1/8 the nice
  effect (pri = p_estcpu/4 + nice*2), but it's actually at least 3x that
  because it will ramp up linearly but be decayed only exponentially, thus
  converging to an additional .75 nice for a loadaverage of one. I killed
  this, it makes the behavior hard to control, almost impossible to analyze,
  and the effect (~~nothing at for the first second, then somewhat increased
  niceness after three seconds or more, depending on load average) pointless.

  === Other bugs === hz -> profhz in the p_pctcpu = f(p_cpticks) calcuation.
  Collect scheduler functionality. Try to put each abstraction in just one
  place.
  ----------------------------

The details are a little different in FreeBSD:

=== nice bug ===   Fixing this is the main point of this commit.  We use
essentially the same clipping rule as NetBSD (our limit on p_estcpu
differs by a scale factor).  However, clipping at all is fundamentally
bad.  It gives free CPU the hoggiest hogs once they reach the limit, and
reaching the limit is normal for long-running hogs.  This will be fixed
later.

=== New schedclk() mechanism ===  We don't use the NetBSD schedclk()
(now schedclock()) mechanism.  We require (real)stathz to be about 128
and scale by an extra factor of 2 compared with NetBSD's statclock().
We scale p_estcpu instead of scaling the clock.  This is more accurate
and flexible.

=== Algorithm change ===  Same change.

=== Other bugs ===  The p_pctcpu bug was fixed long ago.  We don't try as
hard to abstract functionality yet.

Related changes: the new limit on p_estcpu must be exported to kern_exit.c
for clipping in wait1().

Agreed with by:		dufault
1999-11-28 12:12:13 +00:00
Peter Wemm
64f86df1ed Take a shot at implementing the fix for PR 15014 for the a.out kernel
linker as well.

PR:		15014
Submitted by:	Vladimir N. Silyaev <vns@delta.odessa.ua>
1999-11-28 12:06:29 +00:00
Peter Wemm
b5abfb708c Fix an embarresing mistake in the kld symbol lookup for DDB. It should
now correctly do a traceback when crashing inside a KLD module.

PR:		15014
Submitted by:	Vladimir N. Silyaev <vns@delta.odessa.ua>
1999-11-28 11:59:18 +00:00
Bruce Evans
9bc8d885ed Updated comments for the move in the previous commit. 1999-11-27 15:27:11 +00:00
Bruce Evans
71a62f8a05 Fixed some comments in statclock(). The previous commit made it clearer
that one comment was attached to null code.
1999-11-27 14:37:34 +00:00
Bruce Evans
8a9d4d98b1 Moved scheduling-related code to kern_synch.c so that it is easier to fix
and extend.  The new function containing the code is named schedclock()
as in NetBSD, but it has slightly different semantics (it already handles
incrementation of p->p_cpticks, and it should handle any calling frequency).

Agreed with in principle by:	dufault
1999-11-27 12:32:27 +00:00
Poul-Henning Kamp
71e4fff823 Retire MFS_ROOT and MFS_ROOT_SIZE options from the MFS implementation.
Add MD_ROOT and MD_ROOT_SIZE options to the md driver.

Make the md driver handle MFS_ROOT and MFS_ROOT_SIZE options for compatibility.

Add md driver to GENERIC, PCCARD and LINT.

This is a cleanup which removes the need for some of the worse hacks in
MFS:  We really want to have a rootvnode but MFS on a preloaded image
doesn't really have one.  md is a true device, so it is less trouble.

This has been tested with make release, and if people remember to add
the "md" pseudo-device to their kernels, PicoBSD should be just fine
as well.  If people have no other use for MFS, it can be removed from
the kernel.
1999-11-26 20:08:44 +00:00
Poul-Henning Kamp
a8704f8999 Add a sysctl to control if argv is disclosed to the world:
kern.ps_argsopen
It defaults to 1 which means that all users can see all argvs in ps(1).

Reviewed by:	Warner
1999-11-26 08:27:16 +00:00
Poul-Henning Kamp
9b962c56a4 General clean-up of socket.h and associated sources to synchronise up
with NetBSD and the Single Unix Specification v2.

This updates some structures with other, almost equivalent types and
effort is under way to get the whole more consistent.

Also removes a double definition of INET6 and some other clean-ups.

Reviewed by: green, bde, phk
Some part obtained from: NetBSD, SUSv2 specification
1999-11-24 20:49:04 +00:00
Archie Cobbs
25792ef324 Change the prototype of the strto* routines to make the second
parameter a char ** instead of a const char **.  This make these
kernel routines consistent with the corresponding libc userland
routines.

Which is actually 'correct' is debatable, but consistency and
following the spec was deemed more important in this case.

Reviewed by (in concept):	phk, bde
1999-11-24 01:03:08 +00:00
Nick Hibma
28d38bdf15 Fix some bugs in user-end output and add a reference to the original
copyright in the resulting file.
1999-11-22 14:40:04 +00:00
Poul-Henning Kamp
38224dcd59 Convert various pieces of code to use vn_isdisk() rather than checking
for vp->v_type == VBLK.

In ccd: we don't need to call VOP_GETATTR to find the type of a vnode.

Reviewed by:    sos
1999-11-22 10:33:55 +00:00
Yoshinobu Inoue
82cd038d51 KAME netinet6 basic part(no IPsec,no V6 Multicast Forwarding, no UDP/TCP
for IPv6 yet)

With this patch, you can assigne IPv6 addr automatically, and can reply to
IPv6 ping.

Reviewed by: freebsd-arch, cvs-committers
Obtained from: KAME project
1999-11-22 02:45:11 +00:00
Poul-Henning Kamp
a9e0361b4a Introduce the new function
p_trespass(struct proc *p1, struct proc *p2)
which returns zero or an errno depending on the legality of p1 trespassing
on p2.

Replace kern_sig.c:CANSIGNAL() with call to p_trespass() and one
extra signal related check.

Replace procfs.h:CHECKIO() macros with calls to p_trespass().

Only show command lines to process which can trespass on the target
process.
1999-11-21 19:03:20 +00:00
Poul-Henning Kamp
da654d9070 s/p_cred->pc_ucred/p_ucred/g 1999-11-21 12:38:21 +00:00
Mike Smith
b3be35ee5e If vfs_mountroot_try() isn't given a path to try mounting, return a silent
error rather than complaining about it verbosely.  No path is not really
a failure, but the diagnostic was confusing and unuseful.
1999-11-21 08:05:50 +00:00
Peter Wemm
95dc37f68d Tempt fate and stop index from converting a const char * into a char *.
I've made a seperate version (c_index() etc) that use const/const, but
I'm not sure it's worth it considering there is one file in the tree
that uses index on const strings (kern_linker.c) and it's easily adjusted
to scan the strings directly (and is perhaps more efficient that way).
1999-11-21 04:26:48 +00:00
Jordan K. Hubbard
87d643ce34 Revert peter's commit to remove cdevsw_add() - it was a bit premature
since things fail to function properly without it (pty allocation becomes
somewhat haphazard).
1999-11-21 02:54:54 +00:00
Poul-Henning Kamp
0429e37ade struct mountlist and struct mount.mnt_list have no business being
a CIRCLEQ.  Change them to TAILQ_HEAD and TAILQ_ENTRY respectively.

This removes ugly  mp != (void*)&mountlist  comparisons.

Requested by:   phk
Submitted by:   Jake Burkholder jake@checker.org
PR:             14967
1999-11-20 10:00:46 +00:00
Boris Popov
a3021f91e3 Vnode was left referenced in the case if ELF image is broken.
Reviewed by:	Peter Wemm <peter@netplex.com.au>
1999-11-20 03:03:14 +00:00
Jordan K. Hubbard
8d67e113dc Conditionalise unwanted chattyness. 1999-11-19 23:34:01 +00:00
Poul-Henning Kamp
93efcae809 The at_exit and at_fork functions currently use a 'roll your own'
linked list to store the callbak routines.  The patch converts the
lists to queue(3) TAILQs, making the code slightly clearer and ensuring
that callbacks are executed in FIFO order.

Man page also updated as necesary.

(discontinued use of M_TEMP malloc type while here anyway /phk)

Submitted by:   Jake Burkholder jake@checker.org
PR:             14912
1999-11-19 21:29:03 +00:00
Brian Somers
9ed3b901be Cop on a bit and regenerate things correctly.
Pointed out by:	bde
1999-11-18 20:45:04 +00:00
Matthew Dillon
91921bd597 Ensure that garbage from the kernel stack does not wind up being
returned to user mode in the spare fields of the stat structure.

PR:		kern/14966
Reviewed by:	dillon@freebsd.org
Submitted by:	Kelly Yancey kbyanc@posi.net
1999-11-18 08:14:20 +00:00
Matthew Dillon
151f7a5d8a Only bother converting the stat structure if we intend to return it,
when no error occurs.

PR:		kern/14966
Reviewed by:	dillon@freebsd.org
Submitted by:	Kelly Yancey kbyanc@posi.net
1999-11-18 08:08:28 +00:00
Peter Wemm
e79f2d5bfc Remove cdevsw_add() as the make_dev()'s are done in a clone-like fashion.
(ie: the next device is created with make_dev as the first is opened
and so on)
1999-11-18 06:41:30 +00:00
Peter Wemm
e92f63a277 Remove cdevsw_add() - the make_dev() calls are already there.
Don't '#if NSNP > 0' around the thing as it's silly and not required.
config(8) only causes it to be compiled if NSNP is > 0 by definition.
1999-11-18 06:39:47 +00:00
Peter Wemm
7fb0a8412a Remove cdevsw_add() - the necessary make_dev() is already there. 1999-11-18 06:37:00 +00:00
Peter Wemm
2c77a71d3d Remove cdevsw_add() - the necessary make_dev() calls appear to be there
already.
1999-11-18 06:34:47 +00:00
Peter Wemm
eed9fd425d Fix a warning. 1999-11-18 06:29:57 +00:00
Peter Wemm
efa726dd8f 'const'ify a bunch of pointers in the resource_*() functions for accessing
the config hint tables.  This fixes a few warnings elsewhere (eg: fd).
1999-11-18 06:05:30 +00:00
Brian Somers
b08210f5fa modfind(char *) -> modfind(const char *)
Reminded by:	dfr
1999-11-17 21:32:40 +00:00
Peter Wemm
e29e202c41 Add e_stats (p->p_stats, from struct user->u_stats) to eproc so it's
fetchable via sysctl.  This saves ps having to read the u-area for stats.
Be sure to recompile libkvm, ps, w, top and the usual suspects.
1999-11-17 12:49:22 +00:00
Poul-Henning Kamp
b9df5231ca Introduce commandline caching in the kernel.
This fixes some nasty procfs problems for SMP, makes ps(1) run much faster,
and makes ps(1) even less dependent on /proc which will aid chroot and
jails alike.

To disable this facility and revert to previous behaviour:
        sysctl -w kern.ps_arg_cache_limit=0

For full details see the current@FreeBSD.org mail-archives.
1999-11-16 20:31:58 +00:00
Poul-Henning Kamp
1b7277516b Commit the remaining part of PR14914:
Alot of the code in sys/kern directly accesses the *Q_HEAD and *Q_ENTRY
   structures for list operations.  This patch makes all list operations
   in sys/kern use the queue(3) macros, rather than directly accessing the
   *Q_{HEAD,ENTRY} structures.

Reviewed by:    phk
Submitted by:   Jake Burkholder <jake@checker.org>
PR:     14914
1999-11-16 16:28:58 +00:00
Poul-Henning Kamp
2e3c8fcbd0 This is a partial commit of the patch from PR 14914:
Alot of the code in sys/kern directly accesses the *Q_HEAD and *Q_ENTRY
   structures for list operations.  This patch makes all list operations
   in sys/kern use the queue(3) macros, rather than directly accessing the
   *Q_{HEAD,ENTRY} structures.

This batch of changes compile to the same object files.

Reviewed by:    phk
Submitted by:   Jake Burkholder <jake@checker.org>
PR:     14914
1999-11-16 10:56:05 +00:00
Marcel Moolenaar
0917704bd4 ${MACHINE} -> ${MACHINE_ARCH}
All Makefiles now use MACHINE_ARCH for the target architecture.
Unification is required for cross-building.

Tags added to:
	sys/boot/Makefile
	sys/boot/arc/loader/Makefile
	sys/kern/Makefile
	usr.bin/cpp/Makefile
	usr.bin/gcore/Makefile
	usr.bin/truss/Makefile

usr.bin/gcore/Makefile:
	fixed typo: MACHINDE -> MACHINE_ARCH
1999-11-14 13:54:44 +00:00
Eivind Eklund
dd8c04f4c7 Remove WILLRELE from VOP_SYMLINK
Note: Previous commit to these files (except coda_vnops and devfs_vnops)
that claimed to remove WILLRELE from VOP_RENAME actually removed it from
VOP_MKNOD.
1999-11-13 20:58:17 +00:00
Eivind Eklund
020024f3d2 Fix style bugs from last commit 1999-11-13 14:35:50 +00:00
Eivind Eklund
edfe736df9 Remove WILLRELE from VOP_RENAME 1999-11-12 03:34:28 +00:00
Alan Cox
99c9d3490b Correct a locking error in apause: It should always hold
the simple lock when it returns.

Also, eliminate spinning on a uniprocessor.  It's pointless.

Submitted by:	bde,
		Assar Westerlund <assar@sics.se>
1999-11-11 03:02:03 +00:00
Doug Rabson
c29ab9feec Fix a warning. 1999-11-09 21:35:10 +00:00
Poul-Henning Kamp
698f9cf828 Next step in the device cleanup process.
Correctly lock vnodes when calling VOP_OPEN() from filesystem mount code.

Unify spec_open() for bdev and cdev cases.

Remove the disabled bdev specific read/write code.
1999-11-09 14:15:33 +00:00
Alan Cox
b561683329 Passing "0" or "FALSE" as the fourth argument to vm_fault is wrong. It
should be "VM_FAULT_NORMAL".
1999-11-09 01:44:28 +00:00
Poul-Henning Kamp
9c111b31ce A little bit of nitpicking in the 'syncing disks...' end of a shutdown. 1999-11-08 19:36:45 +00:00
Poul-Henning Kamp
325f13989b Ignore leading 'r' in base of root device name. 1999-11-08 11:44:51 +00:00
Peter Wemm
900942ba53 Zap devsw_module_handler(). 1999-11-08 08:10:00 +00:00
Poul-Henning Kamp
44d1184e81 Rename remove_dev() to destroy_dev().
Nagged about by:        msmith
1999-11-08 07:44:01 +00:00
Peter Wemm
845ccef4b8 A hack basically.. We have a bunch of code that used to call
devsw_module_handler() indirectly and not use the chain arguments.  To
eliminate this indirection via that function (which does nothing now)
without duplicating a modevent handler into all the routines that don't
presently have one, supply a NOP (do nothing, return OK) routine which
is functionally equivalent to what's there now.  This is a hack and is
still wrong, because there doesn't appear to be anything to reclaim
resources on an unload of a module with one of these in it.  I'm not
sure whether to make the NOP handler refuse a MOD_UNLOAD event or what.
1999-11-08 06:53:30 +00:00
Peter Wemm
b127fae405 Add a vnode fo_stat() entry point. 1999-11-08 03:32:15 +00:00
Peter Wemm
0ba80ba6a1 Update socket file type for fo_stat(). soo_stat() becomes a fileops
switch entry point rather than being used externally with knowledge of the
internals of the DTYPE_SOCKET f_data contents.
1999-11-08 03:31:01 +00:00
Peter Wemm
29e040e5c1 Update pipe code for fo_stat() entry point - pipe_stat() is now no longer
used outside the pipe code.
1999-11-08 03:28:49 +00:00
Peter Wemm
cf87559cab Use fo_stat() rather than duplicating knowledge of file type internals
in here for stat(2) and friends.  Update the badops entries accordingly.
1999-11-08 03:27:14 +00:00
Poul-Henning Kamp
0c974a1f16 Make vop_panic() a little more informative. 1999-11-07 15:09:49 +00:00
Poul-Henning Kamp
008626c39e Simplify and de-bogotify check for raw disk. 1999-11-07 13:09:09 +00:00
Poul-Henning Kamp
d53dedee55 Remove the devsw magic from DEV_MODULE() 1999-11-07 10:01:17 +00:00
Brian Feldman
d91e41c8c9 Fix the advisory file locking by restoring previous ordering in closef()/
fdrop().  This only showed up when a file descriptor was duplicated
and then closed once, where the lock would be released on the first close().
1999-11-07 05:58:38 +00:00
Matt Jacob
c1dc94eeb5 add in actual getenv_quad function 1999-11-07 01:10:30 +00:00
Poul-Henning Kamp
8db34b3a11 Put a lock on the disk structure while we open to avoid races.
PR:		14486
1999-11-06 10:25:58 +00:00
Mike Smith
91eef0b873 Clean up a couple of initialisations in order to suppress a correct
but un-useful warning.
1999-11-06 07:43:22 +00:00
Mike Smith
c161a8754f Guard against freeing NULL if vfs_mountroot_try is called with NULL
as an argument (this is legal to make other code simpler).
1999-11-05 19:28:07 +00:00
Mike Smith
7a0beaf12d Expand the sscanf buffer to 32 bytes to make room for the expanded
pattern, with some space left over to avoid this mistake next time it's
improved.

Submitted by:	luoqi
1999-11-05 02:45:50 +00:00
Mike Smith
586aaa0f6b Allow vfs names to include the digits 0-9 as well as the letters a-z.
This should let 'cd9660' filesystems be allowed.

Submitted by:	ghelmer
1999-11-04 17:48:11 +00:00
Mike Smith
90ebaea979 Re-implement the handing of RB_CDROM in a machine-independant fashion.
We currently only search SCSI and IDE CDROMs; if there's felt to be a
need for supporting the very old and rare soundcard etc. drives for this
application they can be trivially added.
1999-11-04 01:40:18 +00:00
Poul-Henning Kamp
1a4e73ba51 Move strto{u}[ql]() into their own libkern files.
Urged by:	bde
1999-11-03 18:20:59 +00:00
Poul-Henning Kamp
5b664c7c13 Move isfoo() and friends to the newly created sys/ctype.h.
Urged by:       bde
1999-11-03 17:54:26 +00:00
Mike Smith
88d4183b84 Make MFS work with the new root filesystem search process.
In order to achieve this, root filesystem mount is moved from
SI_ORDER_FIRST to SI_ORDER_SECOND in the SI_SUB_MOUNT_ROOT sysinit
group.  Now, modules which wish to usurp the default root mount
can use SI_ORDER_FIRST.

A compiled-in or preloaded MFS filesystem will become the root
filesystem unless the vfs.root.mountfrom environment variable refers
to a valid bootable device.  This will normally only be the case when
the kernel and MFS image have been loaded from a disk which has a
valid /etc/fstab file.  In this case, the variable should be manually
overridden in the loader, or the kernel booted with -a.  In either
case "mfs:" should be supplied as the new value.

Also fix a typo in one DFLTROOT case that would not have compiled.
1999-11-03 11:02:47 +00:00
Archie Cobbs
44b4dd855d Consolidate some of the various ctype(3) macros in one location. 1999-11-02 22:50:34 +00:00
Mike Smith
b676e48c98 Move a couple of globals here where they are initialised, rather than
orphaning them in vfs_conf.c
1999-11-01 23:54:07 +00:00
Mike Smith
92b3c1b050 swapinit isn't called from vfs_mountroot, so don't complain about it in
a #if 0'ed comment.

Call the machine-dependant cpu_rootconf functions from sysinits in their
respective areas, don't do it from a stub here.
1999-11-01 23:53:27 +00:00
Mike Smith
ed9f9797bb This is a complete rewrite of vfs_conf.c, which changes the way the root
filesystem is discovered.  Preference is given to using the kernel
environment variable vfs.root.mountfrom, which is set by the loader
according to the contents of /etc/fstab.  Changes in the MD code
provide fallback mechanisms for systems not using the loader.

A more robust fallback path is also provided, with the last recourse
being to prompt on the console for a root device.

These changes drastically simplify the machine-dependant parts of
the root configuration process.  In addition, support for CDROM root
devices has been removed; it was a nasty hack and didn't work.
1999-11-01 23:51:00 +00:00
Poul-Henning Kamp
bf9deaba10 Add strtol & strtoul to kernel. Derived from libc versions. 1999-11-01 15:04:04 +00:00
Poul-Henning Kamp
ce4a64f787 New function:
m_print(struct mbuf *);
hexdumps a mbuf.
1999-11-01 15:03:20 +00:00
Julian Elischer
5b42dac8ec Most modern OSs have the ability to flag certain mounts as ones to
be ignored by default by the df(1) program.  This is used mostly to
avoid stat()-ing entries that do not represent "real" disk mount
points (such as those made by an automounter such as amd.)  It is
also useful not to have to stat() these entries because it takes
longer to report them that for other file systems, being that these
mount points are served by a user-level file server and resulting in
several context switches.  Worse, if the automounter is down
unexpectedly, a causal df(1) will hang in an interruptible way.

PR:		kern/9764
Submitted by:	Erez Zadok <ezk@cs.columbia.edu>
1999-11-01 04:57:43 +00:00
Sean Eric Fagan
35a2598f80 Bail out of the process early if the coredumpfile limit is 0.
PR:	kern/14540
Reviewed by:	Nate Williams
1999-10-30 18:55:11 +00:00
Poul-Henning Kamp
3f5bbb089a Remove a #define which doesn't do miracles anymore. 1999-10-30 09:31:52 +00:00
Poul-Henning Kamp
02c58685a4 Change useracc() and kernacc() to use VM_PROT_{READ|WRITE|EXECUTE} for the
"rw" argument, rather than hijacking B_{READ|WRITE}.

Fix two bugs (physio & cam) resulting by the confusion caused by this.

Submitted by:   Tor.Egge@fast.no
Reviewed by:    alc, ken (partly)
1999-10-30 06:32:05 +00:00
Poul-Henning Kamp
923502ff91 useracc() the prequel:
Merge the contents (less some trivial bordering the silly comments)
of <vm/vm_prot.h> and <vm/vm_inherit.h> into <vm/vm.h>.  This puts
the #defines for the vm_inherit_t and vm_prot_t types next to their
typedefs.

This paves the road for the commit to follow shortly: change
useracc() to use VM_PROT_{READ|WRITE} rather than B_{READ|WRITE}
as argument.
1999-10-29 18:09:36 +00:00
Brian Feldman
56f0bef78c Remove a KASSERT() that has fulfilled its purpose. Note that it did
cause problems by tripping on shutdown (reboot(), not the socket
operation :).  Cause is still uncertain, but the panic isn't really
necessary here.
1999-10-24 08:37:21 +00:00
Matthew Dillon
9782fb6209 Adjust the buffer cache to better handle small-memory machines. A
slightly older version of this code was tested by BDE and I.

    Also fixes a lockup situation when kva gets too fragmented.

    Remove the maxvmiobufspace variable and sysctl, they are no longer
    used.  Also cleanup (remove) #if 0 sections from prior commits.

    This code is more of a hack, but presumably the whole buffer cache
    implementation is going to be rewritten in the next year so it's no
    big deal.
1999-10-24 03:27:28 +00:00
Julian Elischer
b58a8a3b1d Now that Netgraph is in the system there are some cleanups we can do.
Also save a slightly closer to completion version of the PPPOE code.

Submitted by: Archie Cobbs <archie@freebsd.org>
1999-10-23 04:28:11 +00:00
Tor Egge
64793e7fe2 Eliminate remaining part of incorrect PCI bus numbering sanity check on systems with more than one PCI bus. 1999-10-15 21:38:15 +00:00
Brian Feldman
d817743797 Missed the second argument of fdrop().
Submitted by:	jhay
1999-10-14 10:50:06 +00:00
Brian Feldman
1aa3e7ddd0 Fix a race condition with shared fd tables and writev(). It's
still not safe to consider file table sharing secure.
Submitted by:	Ville-Pertti Keinonen <will@iki.fi>
1999-10-14 05:37:52 +00:00
Brian Feldman
afce003453 Add a missing spl lowering.
Submitted by:	Ville-Pertti Keinonen <will@iki.fi>
1999-10-14 05:16:16 +00:00
Alfred Perlstein
e0a653ddba change identical and "programming error" panic("mcopy*")'s into
more verbose messages using KASSERT.

Reviewed by: eivind, des
1999-10-13 09:55:42 +00:00
Doug Rabson
25afb89b1c * Add struct resource_list* argument to resource_list_alloc and
resource_list_release. This removes the dependancy on the
  layout of ivars.

* Move set_resource, get_resource and delete_resource from
  isa_if.m to bus_if.m.

* Simplify driver code by providing wrappers to those methods:

     bus_set_resource(dev, type, rid, start, count);
     bus_get_resource(dev, type, rid, startp, countp);
     bus_get_resource_start(dev, type, rid);
     bus_get_resource_count(dev, type, rid);
     bus_delete_resource(dev, type, rid);

* Delete isa_get_rsrc and use bus_get_resource_start instead.

* Fix a stupid typo in isa_alloc_resource reported by Takahashi
  Yoshihiro <nyan@FreeBSD.org>.

* Print a diagnostic message if we can't assign resources to a PnP
  device.

* Change device_print_prettyname() so that it doesn't print
  "(no driver assigned)-1" for anonymous devices.
1999-10-12 21:35:51 +00:00
Marcel Moolenaar
6f841fb79d Don't let osigaction and osigvec accept the new signal numbers.
Fix style bugs caused by the sigset_t in general while I'm here.

Submitted by: bde
1999-10-12 13:14:18 +00:00