re-links dynamic states to default rule instead of
flushing on rule deletion.
This can be useful while performing ruleset reload
(think about `atomic` reload via changing sets).
Currently it is turned off by default.
MFC after: 2 weeks
Sponsored by: Yandex LLC
Print warning for IPv4 address strings which are valid in
inet_aton() but not valid in inet_pton(). (1)
Found by: Özkan KIRIK <ozkan.kirik@gmail.com>
Submitted by: Ian Smith <smithi@nimnet.asn.au> (1)
MFC after: 2 weeks
Sponsored by: Yandex LLC
Setting DSCP support is done via O_SETDSCP which works for both
IPv4 and IPv6 packets. Fast checksum recalculation (RFC 1624) is done for IPv4.
Dscp can be specified by name (AFXY, CSX, BE, EF), by value
(0..63) or via tablearg.
Matching DSCP is done via another opcode (O_DSCP) which accepts several
classes at once (af11,af22,be). Classes are stored in bitmask (2 u32 words).
Many people made their variants of this patch, the ones I'm aware of are
(in alphabetic order):
Dmitrii Tejblum
Marcelo Araujo
Roman Bogorodskiy (novel)
Sergey Matveichuk (sem)
Sergey Ryabin
PR: kern/102471, kern/121122
MFC after: 2 weeks
Instead, add protocol specific mbuf flags M_IP_NEXTHOP and
M_IP6_NEXTHOP. Use them to indicate that the mbuf's chain
contains the PACKET_TAG_IPFORWARD tag. And do a tag lookup
only when this flag is set.
Suggested by: andre
on the related functionality in the runtime via the sysctl variable
net.pfil.forward. It is turned off by default.
Sponsored by: Yandex LLC
Discussed with: net@
MFC after: 2 weeks
for an uninitialized variable.
unused parameters and variables are annotated with
(void)foo; /* UNUSED */
instead of __unused, because this code needs to build
also on linux and windows.
- Add a note to the ipfw(8) man page about the rules no longer being
case sensitive.
- Fix some typos in the man page.
PR: docs/164772
Reviewed by: bz
Approved by: gabor (doc mentor, src committer)
MFC after: 2 weeks
net.inet.ip.fw.tables_max is now read-write.
- Bump IPFW_TABLES_MAX to 65535
Default number of tables is still 128
- Remove IPFW_TABLES_MAX from ipfw(8) code.
Sponsored by Yandex LLC
Approved by: kib(mentor)
MFC after: 2 weeks
- Add support for IPv6 and interface extended tables
- Make number of tables to be loader tunable in range 0..65534.
- Use IP_FW3 opcode for all new extended table cmds
No ABI changes are introduced. Old userland will see valid tables for
IPv4 tables and no entries otherwise. Flush works for any table.
IP_FW3 socket option is used to encapsulate all new opcodes:
/* IP_FW3 header/opcodes */
typedef struct _ip_fw3_opheader {
uint16_t opcode; /* Operation opcode */
uint16_t reserved[3]; /* Align to 64-bit boundary */
} ip_fw3_opheader;
New opcodes added:
IP_FW_TABLE_XADD, IP_FW_TABLE_XDEL, IP_FW_TABLE_XGETSIZE, IP_FW_TABLE_XLIST
ipfw(8) table argument parsing behavior is changed:
'ipfw table 999 add host' now assumes 'host' to be interface name instead of
hostname.
New tunable:
net.inet.ip.fw.tables_max controls number of table supported by ipfw in given
VNET instance. 128 is still the default value.
New syntax:
ipfw add skipto tablearg ip from any to any via table(42) in
ipfw add skipto tablearg ip from any to any via table(4242) out
This is a bit hackish, special interface name '\1' is used to signal interface
table number is passed in p.glob field.
Sponsored by Yandex LLC
Reviewed by: ae
Approved by: ae (mentor)
MFC after: 4 weeks
The index() and rindex() functions were marked LEGACY in the 2001
revision of POSIX and were subsequently removed from the 2008 revision.
The strchr() and strrchr() functions are part of the C standard.
This makes the source code a lot more consistent, as most of these C
files also call into other str*() routines. In fact, about a dozen
already perform strchr() calls.
Distinguish IPv4 and IPv6 addresses and optional port numbers in
user space to set the option for the correct protocol family.
Add support in the kernel for carrying the new IPv6 destination
address and port.
Add support to TCP and UDP for IPv6 and fix UDP IPv4 to not change
the address in the IP header.
Add support for IPv6 forwarding to a non-local destination.
Add a regession test uitilizing VIMAGE to check all 20 possible
combinations I could think of.
Obtained from: David Dolson at Sandvine Incorporated
(original version for ipfw fwd IPv6 support)
Sponsored by: Sandvine Incorporated
PR: bin/117214
MFC after: 4 weeks
Approved by: re (kib)
possible to organize subroutines with rules.
The "call" action saves the current rule number in the internal
stack and rules processing continues from the first rule with
specified number (similar to skipto action). If later a rule with
"return" action is encountered, the processing returns to the first
rule with number of "call" rule saved in the stack plus one or higher.
Submitted by: Vadim Goncharov
Discussed by: ipfw@, luigi@
applicable here, since modifies the string. Switch to strchr().
- Restore support for undocumented optional parameters of
redir_port and redir_proto, that were disabled in 220835.
- While here, change !isalpha() checks on optinal parameters
for isdigit().
Submitted by: Alexander V. Chernikov <melifaro ipfw.ru>
PR: kern/143653
"globalport" option for multiple NAT instances.
If ipfw rule contains "global" keyword instead of nat_number, then
for each outgoing packet ipfw_nat looks up translation state in all
configured nat instances. If an entry is found, packet aliased
according to that entry, otherwise packet is passed unchanged.
User can specify "skip_global" option in NAT configuration to exclude
an instance from the lookup in global mode.
PR: kern/157867
Submitted by: Alexander V. Chernikov (previous version)
Tested by: Eugene Grosbein
