c944338750
This machine uses a non-standard scheme to specify the interrupts to be assigned for devices in PCI slots; instead of giving the INO or full interrupt number (which is done for the other devices in this box), the firmware interrupt properties contain intpin numbers, which have to be swizzled as usual on PCI-PCI bridges; however, the PCI host bridge nodes have no interrupt map, so we need to guess the correct INO by slot number of the device or the closest PCI-PCI bridge leading to it, and the intpin. To do this, this fix makes the following changes: - Add a newbus method for sparc64 PCI host bridges to guess the INO, and glue code in ofw_pci_orb_callback() to invoke it based on a new quirk entry. The guessing is only done for interrupt numbers too low to contain any IGN found on e450s. - Create another new quirk entry was created to prevent mapping of EBus interrupts at PCI level; the e450 has full INOs in the interrupt properties of EBus devices, so trying to remap them could cause problems. - Set both quirk entries for e450s; remove the no-swizzle entry. - Determine the psycho half (bus A or B) a driver instance manages in psycho_attach() - Implement the new guessing method for psycho, using the slot number, psycho half and property value (intpin). Thanks go to the testers, especially Brian Denehy, who tested many kernels for me until I had found the right workaround. Tested by: Brian Denehy <B.Denehy@90east.com>, jake, fenner, Marius Strobl <marius@alchemy.franken.de>, Marian Dobre <mari@onix.ro> Approved by: re (scottl)
441 lines
12 KiB
C
441 lines
12 KiB
C
/*
|
|
* Copyright (c) 1999, 2000 Matthew R. Green
|
|
* Copyright (c) 2001 Thomas Moestl <tmm@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: NetBSD: ebus.c,v 1.26 2001/09/10 16:27:53 eeh Exp
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include "opt_ebus.h"
|
|
|
|
/*
|
|
* UltraSPARC 5 and beyond ebus support.
|
|
*
|
|
* note that this driver is not complete:
|
|
* - ebus2 dma code is completely unwritten
|
|
* - interrupt establish is written and appears to work
|
|
* - bus map code is written and appears to work
|
|
* XXX: This is PCI specific, however, there exist SBus-to-EBus bridges...
|
|
* XXX: The EBus was designed to allow easy adaption of ISA devices to it - a
|
|
* compatability layer for ISA devices might be nice, although probably not
|
|
* easily possible because of some cruft (like in[bwl]/out[bwl] and friends).
|
|
* Additionally, the existing ISA code is limited to one ISA bus, however,
|
|
* there are machines with both ISA and EBus.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <ofw/openfirm.h>
|
|
#include <ofw/ofw_pci.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/ofw_bus.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <pci/pcireg.h>
|
|
#include <pci/pcivar.h>
|
|
|
|
#include <sparc64/pci/ofw_pci.h>
|
|
|
|
/*
|
|
* The register, ranges and interrupt map properties are identical to the ISA
|
|
* ones.
|
|
*/
|
|
#include <sparc64/isa/ofw_isa.h>
|
|
#include <sparc64/ebus/ebusvar.h>
|
|
|
|
#ifdef EBUS_DEBUG
|
|
#define EDB_PROM 0x01
|
|
#define EDB_CHILD 0x02
|
|
#define EDB_INTRMAP 0x04
|
|
#define EDB_BUSMAP 0x08
|
|
#define EDB_BUSDMA 0x10
|
|
#define EDB_INTR 0x20
|
|
int ebus_debug = 0xff;
|
|
#define DPRINTF(l, s) do { if (ebus_debug & l) printf s; } while (0)
|
|
#else
|
|
#define DPRINTF(l, s)
|
|
#endif
|
|
|
|
struct ebus_devinfo {
|
|
char *edi_name; /* PROM name */
|
|
char *edi_compat;
|
|
phandle_t edi_node; /* PROM node */
|
|
|
|
struct resource_list edi_rl;
|
|
};
|
|
|
|
struct ebus_softc {
|
|
phandle_t sc_node;
|
|
|
|
struct isa_ranges *sc_range;
|
|
|
|
int sc_nrange;
|
|
int sc_nimap;
|
|
};
|
|
|
|
static int ebus_probe(device_t);
|
|
static int ebus_print_child(device_t, device_t);
|
|
static void ebus_probe_nomatch(device_t, device_t);
|
|
static int ebus_read_ivar(device_t, device_t, int, uintptr_t *);
|
|
static int ebus_write_ivar(device_t, device_t, int, uintptr_t);
|
|
static struct resource *ebus_alloc_resource(device_t, device_t, int, int *,
|
|
u_long, u_long, u_long, u_int);
|
|
static struct resource_list *ebus_get_resource_list(device_t, device_t);
|
|
|
|
static struct ebus_devinfo *ebus_setup_dinfo(device_t, struct ebus_softc *,
|
|
phandle_t, char *);
|
|
static void ebus_destroy_dinfo(struct ebus_devinfo *);
|
|
static int ebus_print_res(struct ebus_devinfo *);
|
|
|
|
static device_method_t ebus_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ebus_probe),
|
|
DEVMETHOD(device_attach, bus_generic_attach),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, ebus_print_child),
|
|
DEVMETHOD(bus_probe_nomatch, ebus_probe_nomatch),
|
|
DEVMETHOD(bus_read_ivar, ebus_read_ivar),
|
|
DEVMETHOD(bus_write_ivar, ebus_write_ivar),
|
|
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
|
|
DEVMETHOD(bus_alloc_resource, ebus_alloc_resource),
|
|
DEVMETHOD(bus_get_resource_list, ebus_get_resource_list),
|
|
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
|
|
DEVMETHOD(bus_release_resource, bus_generic_rl_release_resource),
|
|
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t ebus_driver = {
|
|
"ebus",
|
|
ebus_methods,
|
|
sizeof(struct ebus_softc),
|
|
};
|
|
|
|
static devclass_t ebus_devclass;
|
|
|
|
DRIVER_MODULE(ebus, pci, ebus_driver, ebus_devclass, 0, 0);
|
|
|
|
static int
|
|
ebus_probe(device_t dev)
|
|
{
|
|
struct ebus_softc *sc;
|
|
struct ebus_devinfo *edi;
|
|
char name[10];
|
|
device_t cdev;
|
|
phandle_t node;
|
|
char *cname;
|
|
|
|
/*
|
|
* XXX: PCI specific! There should be a common cookie IVAR value for all
|
|
* buses! Does not really matter much here though...
|
|
*/
|
|
node = ofw_pci_find_node(pci_get_bus(dev), pci_get_slot(dev),
|
|
pci_get_function(dev));
|
|
if (node == 0)
|
|
return (ENXIO);
|
|
|
|
/* Match a real ebus */
|
|
OF_getprop(node, "name", &name, sizeof(name));
|
|
if (pci_get_class(dev) != PCIC_BRIDGE ||
|
|
pci_get_vendor(dev) != 0x108e ||
|
|
strcmp(name, "ebus") != 0)
|
|
return (ENXIO);
|
|
|
|
if (pci_get_device(dev) == 0x1000)
|
|
device_set_desc(dev, "PCI-EBus2 bridge");
|
|
else if (pci_get_device(dev) == 0x1100)
|
|
device_set_desc(dev, "PCI-EBus3 bridge");
|
|
else
|
|
return (ENXIO);
|
|
|
|
device_printf(dev, "revision 0x%02x\n", pci_get_revid(dev));
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->sc_node = node;
|
|
|
|
sc->sc_nrange = OF_getprop_alloc(node, "ranges",
|
|
sizeof(*sc->sc_range), (void **)&sc->sc_range);
|
|
if (sc->sc_nrange == -1)
|
|
panic("ebus_attach: could not get ranges property");
|
|
|
|
/*
|
|
* now attach all our children
|
|
*/
|
|
DPRINTF(EDB_CHILD, ("ebus node %08x, searching children...\n", node));
|
|
for (node = OF_child(node); node > 0; node = OF_peer(node)) {
|
|
if ((OF_getprop_alloc(node, "name", 1, (void **)&cname)) == -1)
|
|
continue;
|
|
|
|
if ((edi = ebus_setup_dinfo(dev, sc, node, cname)) == NULL) {
|
|
device_printf(dev, "<%s>: incomplete\n", cname);
|
|
free(cname, M_OFWPROP);
|
|
continue;
|
|
}
|
|
if ((cdev = device_add_child(dev, NULL, -1)) == NULL)
|
|
panic("ebus_attach: device_add_child failed");
|
|
device_set_ivars(cdev, edi);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ebus_print_child(device_t dev, device_t child)
|
|
{
|
|
struct ebus_devinfo *edi;
|
|
int retval;
|
|
|
|
edi = device_get_ivars(child);
|
|
retval = bus_print_child_header(dev, child);
|
|
retval += ebus_print_res(edi);
|
|
retval += bus_print_child_footer(dev, child);
|
|
return (retval);
|
|
}
|
|
|
|
static void
|
|
ebus_probe_nomatch(device_t dev, device_t child)
|
|
{
|
|
struct ebus_devinfo *edi;
|
|
|
|
edi = device_get_ivars(child);
|
|
device_printf(dev, "<%s>", edi->edi_name);
|
|
ebus_print_res(edi);
|
|
printf(" (no driver attached)\n");
|
|
}
|
|
|
|
static int
|
|
ebus_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
|
|
{
|
|
struct ebus_devinfo *dinfo;
|
|
|
|
if ((dinfo = device_get_ivars(child)) == NULL)
|
|
return (ENOENT);
|
|
switch (which) {
|
|
case EBUS_IVAR_COMPAT:
|
|
*result = (uintptr_t)dinfo->edi_compat;
|
|
break;
|
|
case EBUS_IVAR_NAME:
|
|
*result = (uintptr_t)dinfo->edi_name;
|
|
break;
|
|
case EBUS_IVAR_NODE:
|
|
*result = dinfo->edi_node;
|
|
break;
|
|
default:
|
|
return (ENOENT);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ebus_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
|
|
{
|
|
struct ebus_devinfo *dinfo;
|
|
|
|
if ((dinfo = device_get_ivars(child)) == NULL)
|
|
return (ENOENT);
|
|
switch (which) {
|
|
case EBUS_IVAR_COMPAT:
|
|
case EBUS_IVAR_NAME:
|
|
case EBUS_IVAR_NODE:
|
|
return (EINVAL);
|
|
default:
|
|
return (ENOENT);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct resource *
|
|
ebus_alloc_resource(device_t bus, device_t child, int type, int *rid,
|
|
u_long start, u_long end, u_long count, u_int flags)
|
|
{
|
|
struct ebus_softc *sc;
|
|
struct resource_list *rl;
|
|
struct resource_list_entry *rle;
|
|
struct ebus_devinfo *edi;
|
|
int passthrough = (device_get_parent(child) != bus);
|
|
int isdefault = (start == 0UL && end == ~0UL);
|
|
u_long nstart, nend;
|
|
int ptype;
|
|
|
|
sc = (struct ebus_softc *)device_get_softc(bus);
|
|
edi = device_get_ivars(child);
|
|
rl = &edi->edi_rl;
|
|
/*
|
|
* Map ebus ranges to PCI ranges. This may include changing the
|
|
* allocation type.
|
|
*/
|
|
ptype = type;
|
|
nstart = start;
|
|
nend = end;
|
|
switch (type) {
|
|
case SYS_RES_IOPORT:
|
|
if (!isdefault && !passthrough) {
|
|
ptype = ofw_isa_map_iorange(sc->sc_range, sc->sc_nrange,
|
|
&nstart, &nend);
|
|
}
|
|
if (isdefault && passthrough) {
|
|
panic("ebus_alloc_resource: passthrough of default "
|
|
"allocation not supported");
|
|
}
|
|
break;
|
|
case SYS_RES_IRQ:
|
|
break;
|
|
default:
|
|
panic("ebus_alloc_resource: unsupported resource type %d",
|
|
type);
|
|
}
|
|
|
|
/*
|
|
* This inlines a modified resource_list_alloc(); this is needed
|
|
* because the resources need to be mapped into the bus space.
|
|
* This could be done when the resources are added to the resource
|
|
* lists, however doing it here is slightly more flexible.
|
|
*/
|
|
if (passthrough) {
|
|
return (BUS_ALLOC_RESOURCE(device_get_parent(bus), child,
|
|
ptype, rid, nstart, nend, count, flags));
|
|
}
|
|
|
|
rle = resource_list_find(rl, type, *rid);
|
|
if (rle == NULL)
|
|
return (NULL); /* no resource of that type/rid */
|
|
|
|
if (rle->res != NULL)
|
|
panic("ebus_alloc_resource: resource entry is busy");
|
|
|
|
if (isdefault) {
|
|
nstart = rle->start;
|
|
count = ulmax(count, rle->count);
|
|
nend = ulmax(rle->end, nstart + count - 1);
|
|
if (type == SYS_RES_IOPORT) {
|
|
ptype = ofw_isa_map_iorange(sc->sc_range, sc->sc_nrange,
|
|
&nstart, &nend);
|
|
}
|
|
}
|
|
|
|
rle->res = BUS_ALLOC_RESOURCE(device_get_parent(bus), child,
|
|
ptype, rid, nstart, nend, count, flags);
|
|
|
|
return (rle->res);
|
|
|
|
}
|
|
|
|
static struct resource_list *
|
|
ebus_get_resource_list(device_t dev, device_t child)
|
|
{
|
|
struct ebus_devinfo *edi;
|
|
|
|
edi = device_get_ivars(child);
|
|
return (&edi->edi_rl);
|
|
}
|
|
|
|
static struct ebus_devinfo *
|
|
ebus_setup_dinfo(device_t dev, struct ebus_softc *sc, phandle_t node,
|
|
char *name)
|
|
{
|
|
struct ebus_devinfo *edi;
|
|
struct isa_regs *reg;
|
|
u_int32_t *intrs, intr;
|
|
u_int64_t start;
|
|
int nreg, nintr, i;
|
|
|
|
edi = malloc(sizeof(*edi), M_DEVBUF, M_ZERO | M_WAITOK);
|
|
if (edi == NULL)
|
|
return (NULL);
|
|
resource_list_init(&edi->edi_rl);
|
|
edi->edi_name = name;
|
|
edi->edi_node = node;
|
|
|
|
OF_getprop_alloc(node, "compat", 1, (void **)&edi->edi_compat);
|
|
nreg = OF_getprop_alloc(node, "reg", sizeof(*reg), (void **)®);
|
|
if (nreg == -1) {
|
|
ebus_destroy_dinfo(edi);
|
|
return (NULL);
|
|
}
|
|
for (i = 0; i < nreg; i++) {
|
|
start = ISA_REG_PHYS(reg + i);
|
|
/*
|
|
* XXX: use SYS_RES_IOPORT for compatability with ISA drivers -
|
|
* probably, SYS_RES_MEMORY would be more apporpriate, although
|
|
* that does not really matter.
|
|
*/
|
|
resource_list_add(&edi->edi_rl, SYS_RES_IOPORT, i,
|
|
start, start + reg[i].size - 1, reg[i].size);
|
|
}
|
|
|
|
nintr = OF_getprop_alloc(node, "interrupts", sizeof(*intrs),
|
|
(void **)&intrs);
|
|
for (i = 0; i < nintr; i++) {
|
|
intr = ofw_bus_route_intr(node, intrs[i], ofw_pci_orb_callback,
|
|
dev);
|
|
if (intr == ORIR_NOTFOUND) {
|
|
panic("ebus_setup_dinfo: could not map ebus "
|
|
"interrupt %d", intrs[i]);
|
|
}
|
|
resource_list_add(&edi->edi_rl, SYS_RES_IRQ, i,
|
|
intr, intr, 1);
|
|
}
|
|
free(reg, M_OFWPROP);
|
|
|
|
return (edi);
|
|
}
|
|
|
|
/*
|
|
* NOTE: This does not free the name member (it is needed afterwards in some
|
|
* cases).
|
|
*/
|
|
static void
|
|
ebus_destroy_dinfo(struct ebus_devinfo *edi)
|
|
{
|
|
|
|
resource_list_free(&edi->edi_rl);
|
|
free(edi, M_DEVBUF);
|
|
}
|
|
|
|
|
|
static int
|
|
ebus_print_res(struct ebus_devinfo *edi)
|
|
{
|
|
int retval;
|
|
|
|
retval = 0;
|
|
retval += resource_list_print_type(&edi->edi_rl, "addr", SYS_RES_IOPORT,
|
|
"%#lx");
|
|
retval += resource_list_print_type(&edi->edi_rl, "irq", SYS_RES_IRQ,
|
|
"%ld");
|
|
return (retval);
|
|
}
|