..
ath_dfs /null
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
2013-10-26 17:58:36 +00:00
ath_hal
Return the correct HAL data type for HAL_DIAG_ANI_STATS.
2015-04-06 01:12:53 +00:00
ath_rate
Cast everything to something longer than 32 bits so the sample mask
2015-01-28 04:44:42 +00:00
ah_osdep.c
Pull in r267961 and r267973 again. Fix for issues reported will follow.
2014-06-28 03:56:17 +00:00
ah_osdep.h
Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.
2012-08-05 10:12:27 +00:00
if_ath_ahb.c
Lay some groundwork for having this stuff hang off of AHB rather than
2015-03-02 02:14:44 +00:00
if_ath_alq.c
Support sending ATH_ALQ messages with no payload.
2013-05-13 21:17:27 +00:00
if_ath_alq.h
Add ALQ beacon debugging.
2013-05-13 21:18:00 +00:00
if_ath_beacon.c
Shut down RX before TX - in theory, this should make the chip less likely
2014-08-23 18:55:51 +00:00
if_ath_beacon.h
Bring over some initial power save management support, reset path
2014-04-30 02:19:41 +00:00
if_ath_btcoex.c
Until there's a full MCI implementation - just implement a placeholder
2015-01-17 00:02:18 +00:00
if_ath_btcoex.h
Bring over the initial static bluetooth coexistence configuration
2013-06-07 09:02:02 +00:00
if_ath_debug.c
Pull in r267961 and r267973 again. Fix for issues reported will follow.
2014-06-28 03:56:17 +00:00
if_ath_debug.h
Bring over some initial power save management support, reset path
2014-04-30 02:19:41 +00:00
if_ath_keycache.c
Bring over some initial power save management support, reset path
2014-04-30 02:19:41 +00:00
if_ath_keycache.h
if_ath_led.c
Bring over some initial power save management support, reset path
2014-04-30 02:19:41 +00:00
if_ath_led.h
if_ath_lna_div.c
Add initial support for the AR9485 CUS198 / CUS230 variants.
2014-09-30 03:19:29 +00:00
if_ath_lna_div.h
Initial AR9485/AR933x 1x1 LNA diversity work.
2013-06-14 03:42:10 +00:00
if_ath_misc.h
Add tracking for self-generated frames when the VAP is in sleep state.
2014-05-02 00:48:09 +00:00
if_ath_pci_devlist.h
Add a missing file from the last commit.
2014-09-30 05:50:34 +00:00
if_ath_pci.c
Move the lock destruction/creation to earlier in the process - if
2015-02-14 18:14:45 +00:00
if_ath_rx_edma.c
Fix up the EDMA RX setup path to correctly initialise and reset the RX FIFO.
2014-09-20 01:22:17 +00:00
if_ath_rx_edma.h
Begin abstracting out the RX path in preparation for RX EDMA support.
2012-07-03 06:59:12 +00:00
if_ath_rx.c
Mechanically convert to if_inc_counter().
2014-09-18 20:47:39 +00:00
if_ath_rx.h
Fix the busdma logic to work with EDMA chipsets when using bounce
2013-04-04 08:21:56 +00:00
if_ath_spectral.c
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
2013-10-26 17:58:36 +00:00
if_ath_spectral.h
Add a new (skeleton) spectral mode manager module.
2013-01-02 03:59:02 +00:00
if_ath_sysctl.c
Bump the valid GPIO range for rfkill up from 8 to 16.
2014-12-23 18:48:45 +00:00
if_ath_sysctl.h
if_ath_tdma.c
Add casts to have it compile on amd64 without complaining about
2014-05-07 19:07:45 +00:00
if_ath_tdma.h
Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.
2012-05-20 02:49:42 +00:00
if_ath_tsf.h
Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].
2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c
Quieten the RX/TX descriptor and FIFO setup debugging.
2014-05-05 08:00:50 +00:00
if_ath_tx_edma.h
Begin separating out the TX DMA setup in preparation for TX EDMA support.
2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c
Implement my first cut at "correct" node power-save and
2013-05-15 18:33:05 +00:00
if_ath_tx_ht.h
Implement my first cut at "correct" node power-save and
2013-05-15 18:33:05 +00:00
if_ath_tx.c
Mechanically convert to if_inc_counter().
2014-09-18 20:47:39 +00:00
if_ath_tx.h
Implement a separate hardware queue threshold for aggregate and non-aggr
2013-05-21 18:13:57 +00:00
if_ath.c
Fix more ticks wrapping bugs exposed by the ticks wrapping bug check.
2015-03-29 21:41:05 +00:00
if_athdfs.h
Add a method to explicitly disable radar reporting if required.
2013-01-02 01:36:10 +00:00
if_athioctl.h
Implement my first cut at "correct" node power-save and
2013-05-15 18:33:05 +00:00
if_athrate.h
Update the rate series setup code to use the decisions already made in
2013-04-17 07:21:30 +00:00
if_athvar.h
Add initial support for the AR9485 CUS198 / CUS230 variants.
2014-09-30 03:19:29 +00:00