Adrian Chadd 240b1f1dca Update if_ath(4) to check for "hint.ath.X.macaddr" for an override MAC address. ...

This is used by the AR71xx platform code to choose a local MAC based on
the "board MAC address", versus whatever potentially invalid/garbage
values are stored in the Atheros calibration data.

2015-03-28 23:41:23 +00:00

..

ath_dfs/null

The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare

2013-10-26 17:58:36 +00:00

ath_hal

Add a new HAL capability - required to compile the updated AR9300

2015-01-28 04:02:56 +00:00

ath_rate

Cast everything to something longer than 32 bits so the sample mask

2015-01-28 04:44:42 +00:00

ah_osdep.c

Pull in r267961 and r267973 again. Fix for issues reported will follow.

2014-06-28 03:56:17 +00:00

ah_osdep.h

…

if_ath_ahb.c

Lay some groundwork for having this stuff hang off of AHB rather than

2015-03-02 02:14:44 +00:00

if_ath_alq.c

Support sending ATH_ALQ messages with no payload.

2013-05-13 21:17:27 +00:00

if_ath_alq.h

Add ALQ beacon debugging.

2013-05-13 21:18:00 +00:00

if_ath_beacon.c

Shut down RX before TX - in theory, this should make the chip less likely

2014-08-23 18:55:51 +00:00

if_ath_beacon.h

Bring over some initial power save management support, reset path

2014-04-30 02:19:41 +00:00

if_ath_btcoex.c

Until there's a full MCI implementation - just implement a placeholder

2015-01-17 00:02:18 +00:00

if_ath_btcoex.h

Bring over the initial static bluetooth coexistence configuration

2013-06-07 09:02:02 +00:00

if_ath_debug.c

Pull in r267961 and r267973 again. Fix for issues reported will follow.

2014-06-28 03:56:17 +00:00

if_ath_debug.h

Bring over some initial power save management support, reset path

2014-04-30 02:19:41 +00:00

if_ath_keycache.c

Bring over some initial power save management support, reset path

2014-04-30 02:19:41 +00:00

if_ath_keycache.h

…

if_ath_led.c

Bring over some initial power save management support, reset path

2014-04-30 02:19:41 +00:00

if_ath_led.h

…

if_ath_lna_div.c

Add initial support for the AR9485 CUS198 / CUS230 variants.

2014-09-30 03:19:29 +00:00

if_ath_lna_div.h

Initial AR9485/AR933x 1x1 LNA diversity work.

2013-06-14 03:42:10 +00:00

if_ath_misc.h

Add tracking for self-generated frames when the VAP is in sleep state.

2014-05-02 00:48:09 +00:00

if_ath_pci_devlist.h

Add a missing file from the last commit.

2014-09-30 05:50:34 +00:00

if_ath_pci.c

Move the lock destruction/creation to earlier in the process - if

2015-02-14 18:14:45 +00:00

if_ath_rx_edma.c

Fix up the EDMA RX setup path to correctly initialise and reset the RX FIFO.

2014-09-20 01:22:17 +00:00

if_ath_rx_edma.h

…

if_ath_rx.c

Mechanically convert to if_inc_counter().

2014-09-18 20:47:39 +00:00

if_ath_rx.h

Fix the busdma logic to work with EDMA chipsets when using bounce

2013-04-04 08:21:56 +00:00

if_ath_spectral.c

The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare

2013-10-26 17:58:36 +00:00

if_ath_spectral.h

…

if_ath_sysctl.c

Bump the valid GPIO range for rfkill up from 8 to 16.

2014-12-23 18:48:45 +00:00

if_ath_sysctl.h

…

if_ath_tdma.c

Add casts to have it compile on amd64 without complaining about

2014-05-07 19:07:45 +00:00

if_ath_tdma.h

…

if_ath_tsf.h

…

if_ath_tx_edma.c

Quieten the RX/TX descriptor and FIFO setup debugging.

2014-05-05 08:00:50 +00:00

if_ath_tx_edma.h

…

if_ath_tx_ht.c

Implement my first cut at "correct" node power-save and

2013-05-15 18:33:05 +00:00

if_ath_tx_ht.h

Implement my first cut at "correct" node power-save and

2013-05-15 18:33:05 +00:00

if_ath_tx.c

Mechanically convert to if_inc_counter().

2014-09-18 20:47:39 +00:00

if_ath_tx.h

Implement a separate hardware queue threshold for aggregate and non-aggr

2013-05-21 18:13:57 +00:00

if_ath.c

Update if_ath(4) to check for "hint.ath.X.macaddr" for an override MAC address.

2015-03-28 23:41:23 +00:00

if_athdfs.h

…

if_athioctl.h

Implement my first cut at "correct" node power-save and

2013-05-15 18:33:05 +00:00

if_athrate.h

Update the rate series setup code to use the decisions already made in

2013-04-17 07:21:30 +00:00

if_athvar.h

Add initial support for the AR9485 CUS198 / CUS230 variants.

2014-09-30 03:19:29 +00:00