marius d0f0da4e4f - Also probe DP83865, which is an is an ultra low power version ... of the DP83861 and DP83891. - Reset the PHY during attach so it's in a known state. - Add a comment describing why we hardwire 10baseT support in the BMSR. - Always explicitly set IFM_HDX for half-duplex. [1] Obtained from: OpenBSD [1] MFC after: 2 weeks		2009-06-13 23:27:04 +00:00
..
acphy.c
acphyreg.h
amphy.c
amphyreg.h
atphy.c	Use auto-negotiation for manual media type selection. This fixes	2008-10-25 06:39:17 +00:00
atphyreg.h	Add Attansic/Atheros F1 PHY driver.	2008-05-19 01:12:10 +00:00
axphy.c	New PHY driver for the internal PHY found in the AX88790. There's a	2009-03-30 16:01:09 +00:00
axphyreg.h	New PHY driver for the internal PHY found in the AX88790. There's a	2009-03-30 16:01:09 +00:00
bmtphy.c
bmtphyreg.h
brgphy.c	Restore link state handling which was broken in rev 1.69.	2008-08-12 00:57:39 +00:00
brgphyreg.h	Add support for the BCM5906[M] adapters. These adapters only support	2008-04-29 19:47:13 +00:00
ciphy.c	Correct PHY description and OUI of VSC8211. Previously VSC8211 was	2008-10-23 01:27:15 +00:00
ciphyreg.h
e1000phy.c	Program LED registers for 88E1116/88E1149 PHYs. These PHYs are	2009-06-02 00:30:30 +00:00
e1000phyreg.h	Program LED registers for 88E1116/88E1149 PHYs. These PHYs are	2009-06-02 00:30:30 +00:00
exphy.c
gentbi.c
icsphy.c
icsphyreg.h
inphy.c
inphyreg.h
ip1000phy.c	For IP1001 PHYs, read auto-negotiation advertisement register to	2009-03-09 08:17:46 +00:00
ip1000phyreg.h	For IP1001 PHYs, read auto-negotiation advertisement register to	2009-03-09 08:17:46 +00:00
jmphy.c	Add JMicron JMP202/JMP211 PHY driver.	2008-05-27 01:16:40 +00:00
jmphyreg.h	Add JMicron JMP202/JMP211 PHY driver.	2008-05-27 01:16:40 +00:00
lxtphy.c	Add support for the Apple Big Mac (BMAC) Ethernet controller,	2008-06-07 22:58:32 +00:00
lxtphyreg.h
mii_physubr.c
mii.c	Revert bogusly committed file.	2008-08-23 07:46:58 +00:00
mii.h
miibus_if.m
miidevs	- Also probe DP83865, which is an is an ultra low power version	2009-06-13 23:27:04 +00:00
miivar.h
mlphy.c	Move the code that looks for the companion phy to a subroutine to make	2008-08-23 15:50:18 +00:00
nsgphy.c	- Also probe DP83865, which is an is an ultra low power version	2009-06-13 23:27:04 +00:00
nsgphyreg.h
nsphy.c
nsphyreg.h
nsphyter.c
nsphyterreg.h
pnaphy.c
qsphy.c
qsphyreg.h
rgephy.c	Fix a copy/paste error	2008-08-06 07:52:59 +00:00
rgephyreg.h	Add RTL8211C(L) support.	2008-07-02 08:10:18 +00:00
rlphy.c
rlswitch.c
ruephy.c
ruephyreg.h
smcphy.c	This is a rewritten driver for the SMSC LAN91C111. It's based in part on the	2008-06-06 05:00:49 +00:00
tdkphy.c
tdkphyreg.h
tlphy.c	It turns out that my analysis of the error handling here was wrong.	2008-08-23 15:29:28 +00:00
tlphyreg.h
truephy.c	Renamed the FRAMELEN macro to TRUEPHY_FRAMELEN as for powerpc	2008-11-28 23:44:13 +00:00
truephyreg.h	Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit	2008-06-20 19:30:44 +00:00
ukphy_subr.c
ukphy.c
xmphy.c
xmphyreg.h