d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3fcb7a5365
freebsd-skq/sys/dev
History
Marius Strobl 3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00
..
aac We can pass a format string and args to panic(), so instead of using 2011-02-04 15:45:48 +00:00
acpi_support Fix a few more SYSCTL_PROC() that were missing a CTLFLAG type specifier. 2011-01-19 00:57:58 +00:00
acpica Reimplement how PCI-PCI bridges manage their I/O windows. Previously the 2011-05-03 17:37:24 +00:00
adb
adlink Remove an unnecessary INTR_MPSAFE and a comment suggesting it was 2011-01-06 21:02:14 +00:00
advansys Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ae - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
age - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
agp Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
aha
ahb
ahci Fix some English grammar. 2011-04-19 10:57:40 +00:00
aic
aic7xxx Remove support for the Intel C Compiler from the build infrastructure. 2011-04-19 18:09:21 +00:00
alc - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
ale - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
amd Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
amdsbwd amdsbwd: fix nonsensical timeout calculations 2010-05-31 09:07:23 +00:00
amdtemp
amr Fix clang warning on empty statement. 2010-07-28 16:24:11 +00:00
an Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
arcmsr Update arcmsr(4) to vendor version 1.20.00.21. This release primarily 2011-04-06 20:54:26 +00:00
asmc
asr Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ata According to ATA specifications, when ATAPI master is the only device, it 2011-04-21 20:56:34 +00:00
ath Cosmetic changes to fit 80 character screen width. 2011-04-29 16:43:30 +00:00
atkbdc Only use the BIOS-supplied IRQ for the atkbdc device for a child atkbd 2010-12-21 12:49:37 +00:00
auxio Enroll these drivers in multipass probing. The motivation behind this 2009-12-22 21:02:46 +00:00
bce - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
bfe - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
bge - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
bktr Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
bm Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
buslogic Remove some always-true comparisons. 2011-01-18 15:23:16 +00:00
bwi Pull ieee80211_ratectl_node_init() calls from drivers into net80211. 2011-01-17 20:15:15 +00:00
bwn Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
bxe - Fixed a typo in an if() statement when setting flow control for MTU 2011-05-02 23:34:33 +00:00
cardbus Don't explicitly list pci_write_ivar() for bus_write_ivar, the method is 2011-05-02 15:01:28 +00:00
cas Correct spelling in a comment. 2011-04-22 09:44:01 +00:00
ce Revert r213793. 2010-10-13 17:38:23 +00:00
cfe Start using the 'init_static_kenv()' API provided by r198561 to initialize 2010-08-11 02:13:50 +00:00
cfi Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
ciss Cosmetic: make it less confusing when displaying RAID 1 level, that might 2010-10-02 08:18:19 +00:00
cm Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cmx
coretemp Correct a typo. According to Intel document 318914, the Tj(max) for Core 2 2011-05-02 18:41:54 +00:00
cp Revert r213793. 2010-10-13 17:38:23 +00:00
cpuctl
cpufreq
cs Use bus space functions rather than inw/outw 2011-01-29 00:53:58 +00:00
ct Spell "Hz" correctly wherever it is user-visible. 2010-01-12 17:59:58 +00:00
ctau Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
cx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cxgb Update T3 firmware to 7.11.0 2011-03-25 20:53:02 +00:00
cxgbe Ring the freelist doorbell from within refill_fl. While here, fix a bug 2011-04-20 23:20:00 +00:00
cy
dc - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
dcons
de Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
digi
dpms
dpt Get rid of #ident, GCC 4.4 warns about it being deprecated. 2010-01-08 17:20:41 +00:00
drm Fix display of the drm sysctls. 2011-04-23 23:11:44 +00:00
e1000 Small change to make backporting to stable/7, 2011-04-28 22:21:53 +00:00
ed - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
eisa
en Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need 2011-01-18 21:14:23 +00:00
ep Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
esp Correct spelling in comments. 2011-04-22 13:56:21 +00:00
et - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
ex Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
exca CardBus instead of cardbus. 2010-01-03 23:26:29 +00:00
fatm Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need 2011-01-18 21:14:23 +00:00
fb Use the preload_fetch_addr() and preload_fetch_size() convenience 2011-02-13 19:25:48 +00:00
fdc Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
fdt Change rman_manage_region() to actually honor the rm_start and rm_end 2011-04-29 18:41:21 +00:00
fe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
firewire Allocate the DMA memory shared between the host and the controller as 2011-03-11 22:19:49 +00:00
flash Modify the spi flash driver to allow smaller read IO sizes, but enforce 2011-02-16 20:07:44 +00:00
fxp - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
gem Correct spelling in comments. 2011-04-22 09:41:51 +00:00
glxsb
gpio Add a GPIO driver for the Gateworks Cambria platform. 2010-11-11 20:18:33 +00:00
hatm Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
hifn No need to zero the softc. It's allocated with M_ZERO. 2010-12-18 14:24:24 +00:00
hme - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
hptiop Report transport type in XPT_PATH_INQ. 2010-06-19 13:41:17 +00:00
hptmv - Merge changes to the base system to support OFED. These include 2011-03-21 09:40:01 +00:00
hptrr Pass a format string to make_dev(). 2010-10-13 14:41:52 +00:00
hwpmc Fix two aliases that had the same name but were pointing to different 2010-10-04 17:22:18 +00:00
ic Merge from projects/mips to head by hand: 2010-01-11 04:13:06 +00:00
ichsmb Support for the new Patsburg PCH chipset: 2011-02-01 01:05:11 +00:00
ichwd Add missing bit in r221015. 2011-04-25 14:12:58 +00:00
ida
ie Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ieee488 Implement more of __ibsta: END and SRQI status bits (taken out of the 2010-12-10 22:20:11 +00:00
if_ndis Revert the ndis part of r212122, windrv_stub.c already adds a MODULE_VERSION 2011-01-22 21:33:18 +00:00
iicbus There are PowerMacs which do not have a hwsensor-location property 2011-01-18 21:47:30 +00:00
iir Get rid of #ident. 2010-01-08 20:40:28 +00:00
io - Extract the IODEV_PIO interface from ia64 and make it MI. 2010-04-28 15:38:01 +00:00
ipmi Fixed firmware revision decoding: 2011-04-14 07:14:22 +00:00
ips
ipw Enable 5.5 and 11Mbit TX rates. 2010-05-11 17:14:17 +00:00
iscsi/initiator Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need 2011-01-18 21:14:23 +00:00
isp Add support QLE220 card- an 2500 lookalike. 2011-03-10 23:53:01 +00:00
ispfw Update firmware to more recent versions. 2011-01-05 23:15:22 +00:00
iwi sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly. 2011-01-12 19:53:56 +00:00
iwn Now that all bits are in for 1030/6230 adapters enable those. 2011-04-20 17:49:05 +00:00
ixgb Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ixgbe Add a #define for driver portability to older OS 2011-04-28 23:21:40 +00:00
jme - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
joy
kbd Explicitly tell the compiler that we don't care about the return value 2010-10-13 11:37:12 +00:00
kbdmux Explicitly tell the compiler that we don't care about the return value 2010-10-13 11:37:12 +00:00
ksyms Promote ksyms_map() and ksyms_unmap() to general facility 2011-03-28 12:48:33 +00:00
le Use convenience functions where possible instead of accessing the PCI 2010-12-18 14:21:28 +00:00
led MFgraid/head r218174: 2011-03-24 08:56:12 +00:00
lge - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
lindev
lmc Merge amd64 and i386 bus.h and move the resulting header to x86. Replace 2010-12-20 16:39:43 +00:00
malo Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
mc146818 Remove clause 3 from Izumi Tsutsui's licenses. 2009-12-25 22:58:43 +00:00
mca
mcd
md Implement BIO_DELETE for vnode devices by simply overwriting the deleted 2011-04-29 21:18:41 +00:00
mem Add reader/writer lock around mem_range_attr_get() and mem_range_attr_set(). 2011-01-17 22:58:28 +00:00
mfi When masking direct and processor devices during an inquiry, properly 2010-12-06 17:02:56 +00:00
mge Convert the PHY drivers to honor the mii_flags passed down and convert 2010-10-15 14:52:11 +00:00
mii - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
mk48txx Fix botches in r201005: 2010-01-01 22:47:53 +00:00
mlx
mly MFp4: Large set of CAM inprovements. 2010-01-28 08:41:30 +00:00
mmc Fix 32bit bit fields handling. This fixes card serial number fetching. 2011-01-17 19:31:34 +00:00
mn
mps Silence 'out of chain frames' warnings and bump the number of frames. 2011-02-25 17:30:25 +00:00
mpt Correct spelling. 2011-04-22 09:59:16 +00:00
mse
msk When msk_detach() is called from msk_attach(), ifp may be 2011-04-25 04:55:50 +00:00
mvs Fix some English grammar. 2011-04-19 10:57:40 +00:00
mwl Revert r220907 and r220915. 2011-04-22 00:44:27 +00:00
mxge Fix a bug in mxge's LRO which can cause dup acks to 2011-04-07 13:49:44 +00:00
my Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ncv
nfe - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
nge - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
nmdm
nsp
null Mark /dev/zero and /dev/null as eternal. 2010-08-06 09:47:48 +00:00
nve - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
nvram
nvram2env Import nvram2env, a device driver which imports various NVRAM-style 2011-04-03 11:55:48 +00:00
nxge Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ofw Return IEEE 1275 compliant error codes. 2010-11-11 13:42:46 +00:00
patm Fix a few more SYSCTL_PROC() that were missing a CTLFLAG type specifier. 2011-01-19 00:57:58 +00:00
pbio
pccard Fix typos. 2010-11-09 10:59:09 +00:00
pccbb sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly. 2011-01-12 19:53:56 +00:00
pcf
pci Reimplement how PCI-PCI bridges manage their I/O windows. Previously the 2011-05-03 17:37:24 +00:00
pcn - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
pdq Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
powermac_nvram Add support for the Sharp/Micron flash chips to powermac_mvram(4). 2010-09-05 20:04:02 +00:00
ppbus bus_add_child: change type of order parameter to u_int 2010-09-10 11:19:03 +00:00
ppc - Add support for MosChip 9865 Single 1284 Printer port 2011-02-19 17:38:51 +00:00
pst
pty Finish r210923, 210926. Mark some devices as eternal. 2011-01-04 10:59:38 +00:00
puc Add an entry for the Kuroutoshikou SERIAL4P-LPPCI2 which uses an Oxford 2011-05-02 14:34:03 +00:00
quicc Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
ral Don't hardcode assumptions about basic rates, similar to what the rt2661 2011-04-09 14:45:50 +00:00
random Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
rc
re Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
rndtest
rp
safe Remove extraneous semicolons, no functional changes. 2010-01-07 21:01:37 +00:00
sbni Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
scc
scd
sdhci Force DMA for controller found in Lenovo T510 (probably in others too). 2011-02-27 13:58:20 +00:00
sec Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
sf - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
sge - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
si
siba Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
siis Fix some English grammar. 2011-04-19 10:57:40 +00:00
sio Based on discussions on the svn-src mailing list, rework r218195: 2011-02-08 00:16:36 +00:00
sis - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
sk Allocate the DMA memory shared between the host and the controller as 2011-03-11 22:21:12 +00:00
smbus
smc Converted the remainder of the NIC drivers to use the mii_attach() 2010-10-15 15:00:30 +00:00
sn Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snc Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snp
sound SNDCTL_DSP_GETIPTR: set pointer to sndbuf_getfreeptr() 2011-05-03 15:50:22 +00:00
speaker
spibus bus_add_child: change type of order parameter to u_int 2010-09-10 11:19:03 +00:00
ste - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
stg
stge Allocate the DMA memory shared between the host and the controller as 2011-03-11 22:23:46 +00:00
streams After the r219999 is merged to stable/8, rename fallocf(9) to falloc(9) 2011-04-01 13:28:34 +00:00
sym More spelling fixes. 2011-04-22 12:46:39 +00:00
syscons Rename a variable to match scvidctl.c. 2010-11-30 17:34:15 +00:00
tdfx Remove references to MAKEDEV(8) 2010-11-15 05:25:51 +00:00
ti - Allocate the DMA memory shared between the host and the controller as 2011-03-11 22:32:17 +00:00
tl - Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective 2010-10-24 12:51:02 +00:00
tpm Add tpm(4) driver for Trusted Platform Module. 2010-08-12 00:16:18 +00:00
trm MFp4: Large set of CAM inprovements. 2010-01-28 08:41:30 +00:00
tsec Don't use the MAC address in the device tree if it's all zeroes 2011-01-28 23:40:13 +00:00
twa Fix a compile problem introduced with r212008 on 32bit: 2010-09-04 16:27:14 +00:00
twe Teach twe driver to report array stripe size to GEOM. 2009-12-25 17:34:43 +00:00
tx - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
txp Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
uart Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
ubsec Cast the bus_size_t to a intmax_t rather than assuming type-punning to 2010-03-29 17:26:24 +00:00
usb - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
utopia
vge Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00
vkbd
vr - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
vte - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
vx Fix typos - remove duplicate "the". 2011-02-21 09:01:34 +00:00
vxge Add in support for multicast. 2011-05-03 15:58:24 +00:00
watchdog - Add the possibility to reuse the already last used timeout when patting 2011-04-27 16:43:03 +00:00
wb - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 2011-05-03 19:51:29 +00:00
wds
wi sysctl(8) should use the CTLTYPE to determine the type of data when 2011-01-19 17:04:07 +00:00
wl Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wpi No need for htole32(), which is an uint8_t. 2011-05-01 18:41:57 +00:00
xe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
xen Make various (pseudo) interfaces compile without INET in the kernel 2011-04-27 19:30:44 +00:00
xl Do a sweep of the tree replacing calls to pci_find_extcap() with calls to 2011-03-23 13:10:15 +00:00