Andrew Turner 405ada37fb Add support for the uart classes to set their default register shift value. ... This is needed with the pl011 driver. Before this change it would default to a shift of 0, however the hardware places the registers at 4-byte addresses meaning the value should be 2. This patch fixes this for the pl011 when configured using the fdt. The other drivers have a default value of 0 to keep this a no-op. MFC after: 1 week		2015-04-11 17:16:23 +00:00
..
cryptocteon
octe	Mechanically convert to if_inc_counter().	2014-09-19 09:19:49 +00:00
usb	Add 64-bit DMA support in the XHCI controller driver.	2015-01-05 20:22:18 +00:00
asm_octeon.S
ciu.c	Migrate ie->ie_assign_cpu and associated code to use an int for CPU rather	2014-09-17 17:33:22 +00:00
cvmx_config.h
files.octeon1	Add preliminary Octeon PCI console support. Radisys-specific PCI console	2012-11-13 07:39:49 +00:00
if_octm.c	Mechanically convert to if_inc_counter().	2014-09-19 09:19:49 +00:00
obio.c
obiovar.h
octeon_cop2.h
octeon_cop2.S
octeon_ds1337.c	Fix RTC clock writes on many Octeon boards.	2014-09-14 00:02:40 +00:00
octeon_ebt3000_cf.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
octeon_gpio.c	Implement GPIO_GET_BUS() method for all GPIO drivers.	2015-01-31 19:32:14 +00:00
octeon_gpiovar.h	Implement GPIO_GET_BUS() method for all GPIO drivers.	2015-01-31 19:32:14 +00:00
octeon_irq.h
octeon_machdep.c	Merge from vmobj-rwlock branch:	2013-02-26 01:00:11 +00:00
octeon_mp.c
octeon_nmi.S
octeon_pci_console.c	Add basic support for the Radisys-specific PCI console mechanism found on the	2012-11-19 01:58:20 +00:00
octeon_pcmap_regs.h	Actually check board type rather than using a specialized octeon_is_simulation	2012-10-30 06:36:14 +00:00
octeon_pmc.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
octeon_rnd.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
octeon_rtc.c	Devices that rely on hints or identify routines for discovery need to	2013-10-29 14:07:31 +00:00
octeon_wdog.c
octopci_bus_space.c	Update NetBSD Foundation copyrights to 2-clause BSD	2014-03-18 01:40:25 +00:00
octopci.c	Don't disable PCIe just because the host is not a PCI host; the latter flag	2012-11-01 20:39:39 +00:00
octopcireg.h
octopcivar.h
std.octeon1	Remove the gross hack for the Octeon Simple Executive to the least	2013-11-06 05:26:15 +00:00
uart_bus_octeonusart.c
uart_cpu_octeonusart.c	Remove oct_read64 and oct_write64 and use their equivalents from the Simple	2012-10-30 06:29:17 +00:00
uart_dev_oct16550.c	Add support for the uart classes to set their default register shift value.	2015-04-11 17:16:23 +00:00