d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
47ae892c85
freebsd-skq/sys/dev
History
Pyun YongHyeon 47ae892c85 Always disable ASPM L0s and enable L1 before entering into WOL 
suspend state.  Also disable master clock after PHY power down,
this is supposed to save more power. The master clock should be
enabled if WOL is active.
2010-08-08 00:12:31 +00:00
..
aac
acpi_support Remove the acpi_aiboost driver. It has been replaced by aibs(4). 2010-07-25 17:55:57 +00:00
acpica When EC burst mode is activated and multiple bytes are accessed, do not 2010-08-06 23:35:33 +00:00
adb
adlink
advansys
ae Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
age
agp Do not mention VM_ALLOC_RETRY in comment, and normalize the terminology 2010-07-08 08:39:02 +00:00
aha
ahb
ahci Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to 2010-07-25 15:43:52 +00:00
aic
aic7xxx Correct logic bug in aicasm's undefined register bit access detection code. 2010-07-14 14:31:18 +00:00
alc Always disable ASPM L0s and enable L1 before entering into WOL 2010-08-08 00:12:31 +00:00
ale
amd
amdsbwd amdsbwd: fix nonsensical timeout calculations 2010-05-31 09:07:23 +00:00
amdtemp
amr Fix clang warning on empty statement. 2010-07-28 16:24:11 +00:00
an Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
arcmsr Apply vendor version 1.20.00.17. 2010-07-21 18:50:24 +00:00
asmc
asr
ata Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to 2010-07-25 15:43:52 +00:00
ath Extend the ath debugging a little to log the interface name. 2010-07-08 14:08:03 +00:00
atkbdc
auxio
bce Fix an apparent typo. 2010-07-26 23:24:42 +00:00
bfe
bge Use Miscellaneous Configuration Register bit definition instead of 2010-07-15 23:34:58 +00:00
bktr Fix build on architectures where PAGE_SIZE is a long (sparc64, powerpc). 2010-07-13 19:27:20 +00:00
bm
buslogic
bwi Fixes a page fault in bwi_pci_probe() because the array isn't terminated 2010-07-10 22:37:23 +00:00
bwn Fixes a mistake to calculate CALC_COEFF2() value that tmp[3] is 2010-07-22 20:08:02 +00:00
cardbus
cas KTR_CTx are long time aliased by existing classes so they can't serve 2010-07-21 10:05:07 +00:00
ce Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cfe
cfi Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
ciss
cm Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cmx
coretemp Catch known CPUs before using IA32_TEMPERATURE_TARGET. 2010-08-04 00:25:13 +00:00
cp Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cpuctl
cpufreq
cs Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ct
ctau Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
cxgb - Change the warning about PCI-e links narrower than x8 to only apply to 2010-07-26 17:31:15 +00:00
cy
dc
dcons
de
digi
dpms
dpt
drm Add support for ATI Radeon HD 4250. 2010-08-03 16:30:56 +00:00
e1000 Put the early setting of the MAC type back, its 2010-08-06 20:55:49 +00:00
ed Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
eisa
en
ep Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
esp Include <machine/ofw_machdep.h> for OF_getscsinitid(). 2010-05-10 20:02:39 +00:00
et Change copyright holder to author. We prefer using a real legal 2010-07-30 17:51:22 +00:00
ex Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
exca
fatm
fb Protect shared palette and state buffer with a mutex. Remove defunct 2010-08-07 05:46:04 +00:00
fdc Fix a regression from r200554, which broke fdc(4) attachment to acpi(4). 2010-05-30 03:45:41 +00:00
fdt Eliminate FDT_IMMR_VA define. 2010-07-19 18:47:18 +00:00
fe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
firewire
flash Fix naming to be consistent. 2010-07-19 21:50:43 +00:00
fxp If controller received bad frames make sure to update newly added 2010-05-14 17:39:28 +00:00
gem KTR_CTx are long time aliased by existing classes so they can't serve 2010-07-21 10:05:07 +00:00
glxsb
hatm
hifn
hme KTR_CTx are long time aliased by existing classes so they can't serve 2010-07-21 10:05:07 +00:00
hptiop Report transport type in XPT_PATH_INQ. 2010-06-19 13:41:17 +00:00
hptmv Report transport type in XPT_PATH_INQ. 2010-06-19 13:42:14 +00:00
hptrr
hwpmc Make sure that we clear the correct bits when we turn off 2010-07-29 17:52:23 +00:00
ic
ichsmb
ichwd ichwd: correct range check for timeout value 2010-07-24 19:40:16 +00:00
ida
ie Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ieee488
if_ndis
iicbus Fix typo in comment. 2010-08-07 08:31:32 +00:00
iir
io
ipmi Fix test for double-nul characters that terminate the string table at 2010-07-29 13:46:37 +00:00
ips
ipw Enable 5.5 and 11Mbit TX rates. 2010-05-11 17:14:17 +00:00
iscsi/initiator
isp Don't pass a buffer directly as a printflike format string. 2010-06-10 19:38:07 +00:00
ispfw
iwi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
iwn Handle RUN->ASSOC->RUN transition correctly, as in not trigger a 2010-07-15 11:52:20 +00:00
ixgb
ixgbe Fix build 2010-07-01 05:03:24 +00:00
jme
joy
kbd
kbdmux
ksyms
le Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
led
lge
lindev
lmc
malo Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
mc146818
mca
mcd
md - Remove some extra white space. 2010-07-26 10:37:14 +00:00
mem
mfi
mge Convert Marvell ARM platforms to FDT convention. 2010-06-13 13:28:53 +00:00
mii Marvell model number 0x06 is 88E1101 PHY. 2010-08-07 23:16:21 +00:00
mk48txx
mlx
mly
mmc Report relative card address to NewBus as location string. 2010-05-23 09:44:48 +00:00
mn
mpt Figure which is the IO and MEM bars- do not assume that they are in 2010-08-06 17:27:00 +00:00
mse
msk When VLAN hardware tagging is disabled, make sure to disable VLAN 2010-05-04 22:24:19 +00:00
mvs Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to 2010-07-25 15:43:52 +00:00
mwl Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
mxge Add interrupt descriptions for mxge's msi-x vectors 2010-05-21 15:57:24 +00:00
my Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ncv
nfe
nge
nmdm
nsp
null Mark /dev/zero and /dev/null as eternal. 2010-08-06 09:47:48 +00:00
nve
nvram
nxge Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ofw Missed a file in r209803: this header contains a definition of 2010-07-08 18:15:06 +00:00
patm
pbio
pccard
pccbb
pcf
pci - Retire acpi_pcib_resume(). It is has just been an alias for 2010-08-05 16:10:12 +00:00
pcn
pdq Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
powermac_nvram
ppbus Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
ppc
pst
pty
puc Add support for the Perle Speed4 LE. 2010-05-20 13:16:42 +00:00
quicc Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
ral Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
random Use the fpu_kern_enter() interface to properly separate usermode FPU 2010-06-05 16:00:53 +00:00
rc
re Don't change PCIe maximum read request size to 2048 on RTL810x 2010-05-07 23:05:27 +00:00
rndtest
rp
safe
sbni Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
scc
scd
sdhci
sec Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
sf
sge Remove enabling RX checksum offloading in RX filter setup. RX 2010-07-08 18:22:49 +00:00
si
siba
siis Export PCI IDs of ATA/SATA controllers through CAM and ata(4) layers to 2010-07-25 15:43:52 +00:00
sio
sis
sk Some revision of Yukon controller generates corrupted frame when TX 2010-07-09 21:21:08 +00:00
smbus
smc Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
sn Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snc Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
snp
sound Do not free sc if attach failed, as it was allocated by the bus 2010-08-04 07:49:40 +00:00
speaker
spibus
ste
stg
stge
streams
sym
syscons Improve style slightly. 2010-07-19 20:31:04 +00:00
tdfx
ti Neither the page lock nor the page queues lock is required to unwire and 2010-05-03 15:51:59 +00:00
tl
trm
tsec Convert Freescale PowerPC platforms to FDT convention. 2010-07-11 21:08:29 +00:00
twa Don't use pack() for structures that is used purely for software state. 2010-07-09 17:38:15 +00:00
twe
tx
txp
uart Eliminate FDT_IMMR_VA define. 2010-07-19 18:47:18 +00:00
ubsec
usb Sync the list of devices supported by uslcom(4) with NetBSD, Linux, OpenBSD 2010-08-07 16:14:40 +00:00
utopia
vge
vkbd
vr
vx Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
watchdog
wb
wds
wi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wl Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
wpi Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
xe Add new tunable 'net.link.ifqmaxlen' to set default send interface 2010-05-03 07:32:50 +00:00
xen A number of netfront fixes and stability improvements: 2010-06-08 03:13:26 +00:00
xl