freebsd-skq/sys/modules
Søren Schmidt 13014ca04a This is the roumored ATA modulerisation works, and it needs a little explanation.
If you just config KERNEL as usual there should be no apparent changes, you'll get all chipset support code compiled in.

However there is now a way to only compile in code for chipsets needed on a pr vendor basis. ATA now has the following "device" entries:

atacore:	ATA core functionality, always needed for any ATA setup

atacard:	CARDBUS support
atacbus:	PC98 cbus support
ataisa:		ISA bus support
atapci:		PCI bus support only generic chipset support.

ataahci:	AHCI support, also pulled in by some vendor modules.

ataacard, ataacerlabs, ataadaptec, ataamd, ataati, atacenatek, atacypress, atacyrix, atahighpoint, ataintel, ataite, atajmicron, atamarvell, atamicron, atanational, atanetcell, atanvidia, atapromise, ataserverworks, atasiliconimage, atasis, atavia;	Vendor support, ie atavia for VIA chipsets

atadisk:	ATA disk driver
ataraid:	ATA softraid driver

atapicd:	ATAPI cd/dvd driver
atapifd:	ATAPI floppy/flashdisk driver
atapist:	ATAPI tape driver

atausb:		ATA<>USB bridge
atapicam:	ATA<>CAM bridge

This makes it possible to config a kernel with just VIA chipset support by having the following ATA lines in the kernel config file:

device          atacore
device          atapci
device          atavia

And then you need the atadisk, atapicd etc lines in there just as usual.

If you use ATA as modules loaded at boot there is few changes except the rename of the "ata" module to "atacore", things looks just as usual.
However under atapci you now have a whole bunch of vendor specific drivers, that you can kldload individually depending on you needs. Drivers have the same names as used in the kernel config explained above.
2008-10-09 12:56:57 +00:00
..
3dfx Take the functionality contained in the former "options TDFX_LINUX" 2006-03-03 21:37:38 +00:00
3dfx_linux Take the functionality contained in the former "options TDFX_LINUX" 2006-03-03 21:37:38 +00:00
aac
accf_data
accf_dns Add an accept filter for TCP based DNS requests. It waits until the 2008-07-18 14:44:51 +00:00
accf_http
acpi Rewrite the EC driver event model. The main goal is to avoid 2007-09-24 16:59:06 +00:00
ae - Add driver for Attansic L2 FastEthernet controller found on 2008-10-03 10:31:31 +00:00
age Hook up age(4) to the build. 2008-05-19 01:53:47 +00:00
agp Move the agp(4) driver from sys/pci to sys/dev/agp. __FreeBSD_version was 2007-11-12 21:51:38 +00:00
aha Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
ahb Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
aic
aic7xxx Add WERRROR= to work around the warnings 2005-01-26 16:29:07 +00:00
aio MFP4 (with some minor changes): 2006-10-15 14:22:14 +00:00
amd
amr The AR_SCSI_PASSTHROUGH conditional no longer exists, remove it from the 2007-12-02 18:39:38 +00:00
an Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
aout
apm Rename from apm_bioscall.s to apm_bioscall.S for removing a special rule 2005-04-20 12:28:20 +00:00
ar Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
arcmsr Add the Areca SATA RAID driver (arcmsr). This supports the ARC-11xx and 12xx 2005-03-31 18:19:55 +00:00
arcnet INET doesn't belong to opt_inet6.h: INET6 belongs to it. 2006-02-07 18:13:56 +00:00
asmc Remove isa_if.h. 2008-04-07 11:26:13 +00:00
asr Remove Alpha remnants. 2006-07-27 19:12:49 +00:00
ata This is the roumored ATA modulerisation works, and it needs a little explanation. 2008-10-09 12:56:57 +00:00
ath for newer hal's we need opt_ah.h as it specifies how the hal has been 2007-01-28 04:38:35 +00:00
ath_hal o move ath hal os glue code from the hal to the driver: this code was 2006-09-18 16:49:15 +00:00
ath_rate_amrr Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
ath_rate_onoe Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
ath_rate_sample Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
aue Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
auxio Add missing ofw_bus_if.h to SRCS. 2005-02-25 06:59:56 +00:00
axe Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
bce Add a driver for the Broadcom NetXtreme II (BCM5706/BCM5708) 2006-04-10 19:55:23 +00:00
bfe Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
bge Add ofw_bus_if.h as a dependency on sparc64. Without this sparc64 kernel 2007-06-10 00:58:41 +00:00
bios Add WERRROR= to work around the warnings 2005-01-26 16:29:07 +00:00
bktr Remove option headers that do not exist and are not used 2008-03-27 20:38:03 +00:00
bm Add support for the Apple Big Mac (BMAC) Ethernet controller, 2008-06-07 22:58:32 +00:00
bridgestp Add bridgestp as a seperate module. 2006-07-26 22:07:39 +00:00
cam Add the CAM 'SG' peripheral device. This device implements a subset of the 2007-04-07 19:40:58 +00:00
canbepm
canbus
cardbus Implement /dev/cardbus%d.cis, same thing as /dev/pccard%d.cis. There 2005-12-29 01:43:47 +00:00
cbb
cd9660 Makefile changes to reflect moving sys/isofs/cd9660 to sys/fs/cd9660. 2007-02-11 14:01:32 +00:00
cd9660_iconv Makefile changes to reflect moving sys/isofs/cd9660 to sys/fs/cd9660. 2007-02-11 14:01:32 +00:00
cdce Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
ce Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
ciss
cm
cmx Commit cmx(4), a driver for Omnikey CardMan 4040 PCMCIA smartcard readers. 2008-03-06 08:09:45 +00:00
coda Rather than having the Coda module use its own namecache, use the global 2008-02-13 13:06:22 +00:00
coda5 Remove coda_namecache from coda5 as well. We should probably GC coda5 2008-02-13 16:31:04 +00:00
coff
coretemp Add a driver for the on-die digital thermal sensor found on Intel Core 2007-08-15 19:26:03 +00:00
cp Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
cpuctl - Add cpuctl(4) pseudo-device driver to provide access to some low-level 2008-08-08 16:26:53 +00:00
cpufreq Dike out WARNS from kernel module makefiles. Kernels and modules 2006-05-30 09:38:54 +00:00
crypto Integrate the Camellia Block Cipher. For more information see RFC 4132 2007-05-09 19:37:02 +00:00
cryptodev oops, another missed file from crypto api change 2007-03-31 23:15:11 +00:00
cs
ctau Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
cue Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
cx Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
cxgb - Remove default NIC dependency on ulp headers 2008-09-24 01:19:08 +00:00
cyclic The cyclic code is in sys/cddl/dev/cyclic to be consistent with 2008-05-23 22:23:28 +00:00
dc Move dc sources from pci to dev/dc. 2005-10-18 06:11:08 +00:00
dcons Fix a breakage with "MODULES_WITH_WORLD=true make buildworld". 2007-06-01 00:23:34 +00:00
dcons_crom
de Move de from pci to dev/de 2006-02-26 17:51:22 +00:00
digi Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
dpms Add a very simple dpms(4) driver that uses the VESA BIOS DPMS calls to 2008-08-23 21:00:40 +00:00
dpt On i386 compile the back-end with EISA support as well as the EISA 2007-04-10 20:33:31 +00:00
drm Update drm kernel drivers. 2008-08-23 20:59:12 +00:00
dtrace Add the DTrace test kernel module so that people can run the tests. 2008-05-31 09:37:40 +00:00
dummynet Reimplementation of world/kernel build options. For details, see: 2006-03-17 18:54:44 +00:00
ed Add if_ed_rtl80x9.c 2005-10-05 05:26:03 +00:00
elink
em Change to build module with new directory tree 2008-07-30 22:05:06 +00:00
en Let modules use the kernel's opt_*.h files if built along with 2005-10-14 23:30:17 +00:00
ep Minor reorg to keep each bus' files on one line 2005-07-13 14:53:59 +00:00
esp Don't build unused SBus front-ends for sun4v, don't build EBus front-ends 2008-05-04 14:59:25 +00:00
et Remove a file that is not used and does not exist. 2008-07-28 17:56:37 +00:00
ex
exca
ext2fs Move ext2fs from src/gnu to src/gnu/fs. 2005-06-15 02:36:11 +00:00
fatm Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
fdc Dike out WARNS from kernel module makefiles. Kernels and modules 2006-05-30 09:38:54 +00:00
fdescfs
fe
firewire Style: Remove blank lines before EOF. 2006-02-18 23:49:28 +00:00
firmware Unbreak firmware.ko build without kernel. 2008-04-20 16:11:14 +00:00
fxp Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
gem
geom Add support for PC-9800 partition tables. 2008-03-28 17:58:55 +00:00
glxsb Add glxsb(4) driver for the Security Block in AMD Geode LX processors (as 2008-08-09 14:52:31 +00:00
hatm Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
hifn Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
hme Don't build unused SBus front-ends for sun4v, don't build EBus front-ends 2008-05-04 14:59:25 +00:00
hpfs - Fix the hpfs build, hpfs_hash.c was removed from the repository. 2005-03-28 09:41:25 +00:00
hptiop Introduce a driver for the Highpoint RocketRAID 3xxx series of controllers. 2007-05-09 07:07:26 +00:00
hptmv Import new version of the HPTMV driver from Highpoint. The major change 2005-09-07 23:33:26 +00:00
hptrr Add the 'hptrr' driver for supporting the following Highpoint RocketRAID 2007-12-15 00:56:17 +00:00
hwpmc Remove WARNS from here and compile with default kernel flags. 2008-02-21 11:09:59 +00:00
i2c The viapm module build had what appear to be some debugging CFLAGS left 2007-06-24 20:35:59 +00:00
ibcs2
ichwd
ida
ie Add WERRROR= to work around the warnings 2005-01-26 16:29:07 +00:00
if_bridge bridgestp is now a seperate module. 2006-07-26 22:15:15 +00:00
if_disc Let modules use the kernel's opt_*.h files if built along with 2005-10-14 23:30:17 +00:00
if_edsc Introduce a new toy interface, edsc(4). It's a discard interface 2007-03-26 04:39:18 +00:00
if_ef Don't use touch when what is really meant is :> (create an empty file, or 2006-08-14 13:28:53 +00:00
if_faith Let modules use the kernel's opt_*.h files if built along with 2005-10-14 23:30:17 +00:00
if_gif Reimplementation of world/kernel build options. For details, see: 2006-03-17 18:54:44 +00:00
if_gre Let modules use the kernel's opt_*.h files if built along with 2005-10-14 23:30:17 +00:00
if_lagg Rename the trunk(4) driver to lagg(4) as it is too similar to vlan trunking. 2007-04-17 00:35:11 +00:00
if_ndis Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
if_ppp Teach an IPv6 to ppp(4). 2006-11-11 15:02:04 +00:00
if_sl Let modules use the kernel's opt_*.h files if built along with 2005-10-14 23:30:17 +00:00
if_stf Let modules use the kernel's opt_*.h files if built along with 2005-10-14 23:30:17 +00:00
if_tap Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
if_tun Let modules use the kernel's opt_*.h files if built along with 2005-10-14 23:30:17 +00:00
if_vlan if_vlan no more depends on INET. 2007-03-19 17:34:31 +00:00
igb Change Makefile to reflect new directory structure 2008-07-30 22:06:38 +00:00
iir
io No need to generate vnode_if.h anymore 2004-12-29 08:44:30 +00:00
ip_mroute_mod Options spring cleanup: 2007-06-13 02:08:04 +00:00
ipdivert
ipfilter Reimplementation of world/kernel build options. For details, see: 2006-03-17 18:54:44 +00:00
ipfw Link pf 4.1 to the build: 2007-07-03 12:46:08 +00:00
ipfw_nat Move ipfw's nat code into its own kld: ipfw_nat. 2008-02-29 22:27:19 +00:00
ipmi Update the ipmi(4) driver: 2006-09-22 22:11:29 +00:00
ips
ipw Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
ipwfw - Add Intel firmwares for Intel PRO/Wireless LAN 2100/2200/2915 cards in a 2007-03-02 11:42:56 +00:00
iscsi Introduce Danny Braniss' iSCSI initiator, version 2.0.99. Please read the 2007-07-24 15:35:02 +00:00
isp Don't build unused SBus front-ends for sun4v, don't build EBus front-ends 2008-05-04 14:59:25 +00:00
ispfw Don't build unused SBus front-ends for sun4v, don't build EBus front-ends 2008-05-04 14:59:25 +00:00
iwi remove depedancy with vnode_if.h. 2006-03-12 19:06:06 +00:00
iwifw - Add Intel firmwares for Intel PRO/Wireless LAN 2100/2200/2915 cards in a 2007-03-02 11:42:56 +00:00
iwn clear out crud 2008-05-22 21:53:15 +00:00
iwnfw Intel 4965 wireless driver (derived from openbsd driver of the same name) 2008-04-29 21:36:17 +00:00
ixgb Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
ixgbe Remove compile of tcp_lro since its now in netinet 2008-06-11 22:18:50 +00:00
jme Hook up jme(4) to the build. 2008-05-27 01:54:45 +00:00
joy
k8temp Connect k8temp(4) to the build. 2008-04-12 14:20:22 +00:00
kbdmux Fix our ioctl(2) implementation when the argument is "int". New 2006-09-27 19:57:02 +00:00
krpc Add nfslockd and krpc modules. 2008-03-27 11:55:03 +00:00
kue Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
le Don't build unused SBus front-ends for sun4v, don't build EBus front-ends 2008-05-04 14:59:25 +00:00
lge Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
libalias The old PacketAlias* API is not exported when 2007-04-09 17:08:27 +00:00
libiconv
libmbpool
libmchain
linprocfs - Add the new files to the linux module. 2006-08-15 13:01:36 +00:00
linsysfs - Add the new files to the linux module. 2006-08-15 13:01:36 +00:00
linux Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
lmc - Don't include opt_global.h, it is always included implicitly. 2005-10-05 10:07:27 +00:00
lpt
mac_biba
mac_bsdextended
mac_ifoff
mac_lomac
mac_mls
mac_none
mac_partition
mac_portacl mac_portacl.c no longer references vnode_if.h. 2004-12-30 13:49:01 +00:00
mac_seeotheruids
mac_stub
mac_test
malo Multi-bss (aka vap) support for 802.11 devices. 2008-04-20 20:35:46 +00:00
mcd
md Rename GEOM class kernel module g_md.ko to geom_md.ko for consistency 2005-11-11 11:31:23 +00:00
mem Prefer the opt_global.h from KERNBUILDDIR if existent so we obtain all 2008-07-24 14:07:52 +00:00
mfi Add the 'mfip' sub-driver for gaining SCSI-passthrough access to devices 2007-05-16 17:19:47 +00:00
mii Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit 2008-06-20 19:28:33 +00:00
mlx
mly
mmc Loadable modules for mmc (the bus) amd mmcsd (the MMC and SD support 2006-10-20 06:52:59 +00:00
mmcsd Loadable modules for mmc (the bus) amd mmcsd (the MMC and SD support 2006-10-20 06:52:59 +00:00
mpt Add a new personality to mpt(4) devices to allow userland applications to 2008-05-06 20:49:53 +00:00
mqueue Change filesystem name from mqueue to mqueuefs for style consistent. 2005-11-27 08:30:12 +00:00
msdosfs Reflecting the removal of MSDOSFS_LARGE found in sys/conf/files:1.1173. 2007-02-01 04:21:03 +00:00
msdosfs_iconv
mse Separate mse driver into a core driver and a bus attachments. Separate out 2004-12-12 20:05:50 +00:00
msk Hook up msk(4) to the build. 2006-12-13 02:37:48 +00:00
mxge Add optional support to mxge for MSI-X interrupts and multiple receive 2008-01-15 20:34:49 +00:00
my my(4) doesn't need miibus(4). 2007-03-11 15:20:04 +00:00
ncp
ncv Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
ndis Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
netgraph Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
nfe Remove no longer existing opt_bdg.h and opt_bge.h. 2006-11-03 21:41:19 +00:00
nfs4client Style: Remove blank lines before EOF. 2006-02-18 23:49:28 +00:00
nfsclient Style: Remove blank lines before EOF. 2006-02-18 23:49:28 +00:00
nfslockd Unbreak the build by creating opt_nfs.h 2008-07-31 02:13:36 +00:00
nfsserver Let modules use the kernel's opt_*.h files if built along with 2005-10-14 23:30:17 +00:00
nge Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
nmdm Integrate the new MPSAFE TTY layer to the FreeBSD operating system. 2008-08-20 08:31:58 +00:00
nsp Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
ntfs
ntfs_iconv
nullfs
nve Due to a CVS misfire, I ended up committing the wrong version of this. 2005-03-12 08:02:06 +00:00
nvram Split /dev/nvram driver out of isa/clock.c for i386 and amd64. I have not 2007-10-26 03:23:54 +00:00
nwfs opt_vmpage.h is no longer needed here because it is not included by 2006-01-26 19:21:27 +00:00
nxge Merge Neterion if_nxge driver version 2.0.9.11230 with the following 2007-10-29 14:19:32 +00:00
opensolaris Add the DTrace kernel module makefiles. 2008-05-17 02:31:19 +00:00
padlock another missing change for recent crypto mods 2007-03-21 17:37:13 +00:00
patm Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
pccard Add pccard_device.c 2005-09-20 06:48:55 +00:00
pcfclock
pcn Move pcn driver from sys/pci to sys/dev/pcn. 2008-08-14 20:34:46 +00:00
pf Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
pflog Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
plip
pmc Change a directory layout for pc98. 2005-05-10 12:02:18 +00:00
portalfs
powermac_nvram Add missing headers. 2006-10-29 17:23:54 +00:00
ppbus
ppc Make this usable for all platforms. 2006-06-18 05:04:42 +00:00
ppi
pps
procfs Fix our ioctl(2) implementation when the argument is "int". New 2006-09-27 19:57:02 +00:00
pseudofs Add PSEUDOFS_TRACE option. 2005-03-14 16:04:27 +00:00
pst
puc Rewrite of puc(4). Significant changes are: 2006-04-28 21:21:53 +00:00
ral Multi-bss (aka vap) support for 802.11 devices. 2008-04-20 20:35:46 +00:00
ralfw Remove the non-existent rt2860 subdir. Note, the ralfw module is not used in 2008-06-26 18:58:01 +00:00
random
ray
rc Integrate the new MPSAFE TTY layer to the FreeBSD operating system. 2008-08-20 08:31:58 +00:00
rc4
rdma add makefiles for rdma 2008-05-05 20:19:33 +00:00
re Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
reiserfs Moving reiserfs from sys/gnu to sys/gnu/fs. This was discussed on arch@. 2005-06-18 17:10:50 +00:00
rl Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
rndtest
rp Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
rue Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
rum Add support for Ralink Technology RT2501USB/RT2601USB devices. 2007-05-06 10:07:21 +00:00
s3
safe Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
sbni Resurrect the sbni(4) driver. Someone finally tested the MPSAFE patches and 2008-09-10 18:36:58 +00:00
scc Don't build unused SBus front-ends for sun4v, don't build EBus front-ends 2008-05-04 14:59:25 +00:00
scd
scsi_low
sem Rework the lifetime management of the kernel implementation of POSIX 2008-06-27 05:39:04 +00:00
sf Update file list and Makefile after repocopying sf(4) from 2008-01-21 04:27:32 +00:00
sio Rewrite of puc(4). Significant changes are: 2006-04-28 21:21:53 +00:00
sis Move sis to sys/dev/sis for consistency. 2008-08-10 10:00:14 +00:00
sk The sk(4) driver has moved to /sys/dev/sk 2006-04-27 00:14:02 +00:00
slhci Use .CURDIR when referring source code. This fixes build 2007-06-20 00:29:51 +00:00
smbfs Retire NETSMBCRYPTO as a kernel option and make its functionality 2006-03-05 22:52:17 +00:00
sn
snc Add card_if.h and pccarddevs.h 2008-08-07 20:51:51 +00:00
snp Fix the module build for snp(4). 2005-09-19 10:14:05 +00:00
sound Restore SUBDIR+= accidentally removed in the previous revision. 2008-05-04 16:02:45 +00:00
speaker Add /dev/speaker support to amd64. 2005-11-11 09:57:32 +00:00
splash
sppp Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
sr Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
ste Move the ste driver from sys/pci to sys/dev/ste. 2008-08-14 20:09:58 +00:00
stg Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
stge Hook up stge(4) to the build. 2006-07-25 00:45:55 +00:00
streams Housekeeping. Update for maintainers who have handed in their commit bits 2006-07-01 10:51:55 +00:00
svr4 Allow COMPAT_SVR4 to be built without COMPAT_43. 2008-09-15 15:09:35 +00:00
sym
syscons Build blank_saver.ko, fade_saver.ko and green_saver.ko on sparc64 2005-07-10 11:47:04 +00:00
sysvipc Fix the standalone module build. 2005-02-09 08:35:24 +00:00
ti The if_ti Tigon I/II driver has moved to /sys/dev/ti 2005-12-10 00:38:33 +00:00
tl Move the tl driver form sys/pci to sys/dev/tl. 2008-08-14 20:02:34 +00:00
tmpfs MFp4: 2007-06-29 05:23:15 +00:00
trm Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
twa Import version 3.60.03.006 of the TWA driver: 2007-05-09 04:16:32 +00:00
twe Style cleanup. 2005-08-10 04:01:21 +00:00
tx Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
txp Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
uark o Add uark(4), a driver for Arkmicro Technologies ARK3116 based serial 2006-11-15 09:13:25 +00:00
uart In sun4v, use the sparc64 version. We haven't used the serial port on 2006-10-16 22:11:53 +00:00
ubsa We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
ubsec Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
ubser We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
uchcom Add Winchiphead (or Nanjin QinHeng Electronics) USB Serial converter driver. 2007-10-18 10:51:06 +00:00
ucom We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
ucycom We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
udav Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
udbp Release n_hibma's maintainership due to his ENOTIME. 2005-06-04 10:58:39 +00:00
udf
udf_iconv
ufm
ufoma Add FOMA (NTT DoCoMo 3G mobile phone system) driver. 2006-01-09 17:46:36 +00:00
ufs Allow this module to get its options from the kernel build directory 2006-12-21 21:35:49 +00:00
uftdi We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
ugen Release n_hibma's maintainership due to his ENOTIME. 2005-06-04 10:58:39 +00:00
uhid Release n_hibma's maintainership due to his ENOTIME. 2005-06-04 10:58:39 +00:00
uipaq Add support for serial communication with Windows CE based Handheld Computer. 2007-01-28 11:56:14 +00:00
ukbd Fix our ioctl(2) implementation when the argument is "int". New 2006-09-27 19:57:02 +00:00
ulpt Release n_hibma's maintainership due to his ENOTIME. 2005-06-04 10:58:39 +00:00
umass Release n_hibma's maintainership due to his ENOTIME. 2005-06-04 10:58:39 +00:00
umct We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
umodem Release n_hibma's maintainership due to his ENOTIME. 2005-06-04 10:58:39 +00:00
ums Release n_hibma's maintainership due to his ENOTIME. 2005-06-04 10:58:39 +00:00
unionfs
upgt Add Conexant/Intersil PrismGT SoftMAC wireless USB driver - upgt(4). 2008-08-11 03:57:31 +00:00
uplcom We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
ural Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
urio We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
usb opt_bus.h isn't needed here anymore. It never was really needed, 2008-08-30 16:24:01 +00:00
uscanner Release n_hibma's maintainership due to his ENOTIME. 2005-06-04 10:58:39 +00:00
uslcom Remove option headers that do not exist and are not used 2008-03-27 20:38:03 +00:00
utopia The chip specific functions have been split out in their own 2005-02-25 09:49:29 +00:00
uvisor We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
uvscom We don't need to generate vnode_if.h anymore 2004-12-29 08:50:35 +00:00
vesa
vge Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
vkbd Fix our ioctl(2) implementation when the argument is "int". New 2006-09-27 19:57:02 +00:00
vpo
vr Update file list and Makefile after repocopying vr(4) from 2008-03-11 03:50:57 +00:00
vx Remove bridge(4) from the tree. if_bridge(4) is a full functional 2005-09-27 18:10:43 +00:00
wb Move wb driver from sys/pci to sys/dev/wb. 2008-08-14 21:26:29 +00:00
wi Remove opt_wi.h from module and fix typo in pccarddevs. 2008-08-27 05:43:46 +00:00
wlan add ddb support (default to off unless built with the kernel) 2008-09-15 22:46:12 +00:00
wlan_acl Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
wlan_amrr Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
wlan_ccmp Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
wlan_rssadapt Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
wlan_tkip Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
wlan_wep Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
wlan_xauth Per email to arch@ a little while ago (that was greeted with silence), 2008-09-01 23:59:00 +00:00
wpi Remove option headers that do not exist and are not used 2008-03-27 20:38:03 +00:00
wpifw the 3945 firmware license does not require acknowledging the EULA, 2008-10-07 19:42:56 +00:00
xe
xfs Makefile changes to accomodate new XFS import. 2006-06-09 06:10:17 +00:00
xl Move the xl driver form sys/pci to sys/dev/xl for consistency. 2008-08-10 09:45:52 +00:00
zfs Add atomic operations for ZFS/sparc64. 2008-04-11 22:59:33 +00:00
zlib
zyd Makefile for building zyd kernel module. 2007-08-29 21:04:26 +00:00
Makefile - Add driver for Attansic L2 FastEthernet controller found on 2008-10-03 10:31:31 +00:00
Makefile.inc