23487998fa
- emulate VGA read mode 0, - emulate VGA write mode 1, - minor cleanup. Protel's Easytrax, a free PCB layout program, almost runs now; there are still some problems with the keyboard emulation, but the graphics are fine (albeit a bit slow).
430 lines
11 KiB
C
430 lines
11 KiB
C
/*
|
|
* Copyright (c) 2001 The FreeBSD Project, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY The FreeBSD Project, Inc. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL The FreeBSD Project, Inc. OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include "doscmd.h"
|
|
#include "video.h"
|
|
|
|
static u_int32_t decode_modrm(u_int8_t *, u_int16_t,
|
|
regcontext_t *, int *);
|
|
static u_int8_t *reg8(u_int8_t c, regcontext_t *);
|
|
static u_int16_t *reg16(u_int8_t c, regcontext_t *);
|
|
#if 0
|
|
static u_int32_t *reg32(u_int8_t c, regcontext_t *);
|
|
#endif
|
|
static u_int8_t read_byte(u_int32_t);
|
|
static void write_byte(u_int32_t, u_int8_t);
|
|
static void write_word(u_int32_t, u_int16_t);
|
|
|
|
/*
|
|
** Hardware /0 interrupt
|
|
*/
|
|
void
|
|
int00(regcontext_t *REGS)
|
|
{
|
|
debug(D_ALWAYS, "Divide by 0 in DOS program!\n");
|
|
exit(1);
|
|
}
|
|
|
|
void
|
|
int01(regcontext_t *REGS)
|
|
{
|
|
debug(D_ALWAYS, "INT 1 with no handler! (single-step/debug)\n");
|
|
}
|
|
|
|
void
|
|
int03(regcontext_t *REGS)
|
|
{
|
|
debug(D_ALWAYS, "INT 3 with no handler! (breakpoint)\n");
|
|
}
|
|
|
|
void
|
|
int0d(regcontext_t *REGS)
|
|
{
|
|
debug(D_ALWAYS, "IRQ5 with no handler!\n");
|
|
}
|
|
|
|
void
|
|
cpu_init(void)
|
|
{
|
|
u_long vec;
|
|
|
|
vec = insert_hardint_trampoline();
|
|
ivec[0x00] = vec;
|
|
register_callback(vec, int00, "int 00");
|
|
|
|
vec = insert_softint_trampoline();
|
|
ivec[0x01] = vec;
|
|
register_callback(vec, int01, "int 01");
|
|
|
|
vec = insert_softint_trampoline();
|
|
ivec[0x03] = vec;
|
|
register_callback(vec, int03, "int 03");
|
|
|
|
vec = insert_hardint_trampoline();
|
|
ivec[0x0d] = vec;
|
|
register_callback(vec, int0d, "int 0d");
|
|
|
|
vec = insert_null_trampoline();
|
|
ivec[0x34] = vec; /* floating point emulator */
|
|
ivec[0x35] = vec; /* floating point emulator */
|
|
ivec[0x36] = vec; /* floating point emulator */
|
|
ivec[0x37] = vec; /* floating point emulator */
|
|
ivec[0x38] = vec; /* floating point emulator */
|
|
ivec[0x39] = vec; /* floating point emulator */
|
|
ivec[0x3a] = vec; /* floating point emulator */
|
|
ivec[0x3b] = vec; /* floating point emulator */
|
|
ivec[0x3c] = vec; /* floating point emulator */
|
|
ivec[0x3d] = vec; /* floating point emulator */
|
|
ivec[0x3e] = vec; /* floating point emulator */
|
|
ivec[0x3f] = vec; /* floating point emulator */
|
|
}
|
|
|
|
/*
|
|
* Emulate CPU instructions. We need this for VGA graphics, at least in the 16
|
|
* color modes.
|
|
*
|
|
* The emulator is far from complete. We are adding the instructions as we
|
|
* encounter them, so this function is likely to change over time. There are
|
|
* no optimizations and we only emulate a single instruction at a time.
|
|
*
|
|
* As long as there is no support for DPMI or the Operand Size Override prefix
|
|
* we won't need the 32-bit registers. This also means that the default
|
|
* operand size is 16 bit.
|
|
*/
|
|
int
|
|
emu_instr(regcontext_t *REGS)
|
|
{
|
|
int prefix = 1;
|
|
u_int8_t *cs = (u_int8_t *)(R_CS << 4);
|
|
int ip = R_IP;
|
|
int dir, i, instrlen;
|
|
u_int8_t *r8;
|
|
u_int8_t val8;
|
|
u_int16_t val16;
|
|
u_int16_t *seg = &R_DS;
|
|
u_int32_t addr, toaddr;
|
|
|
|
while (prefix) {
|
|
prefix = 0;
|
|
switch (cs[ip]) {
|
|
case 0x08: /* or r/m8, r8 */
|
|
addr = decode_modrm(cs + ip, *seg, REGS, &instrlen);
|
|
r8 = reg8(cs[ip + 1], REGS);
|
|
val8 = read_byte(addr) | *r8;
|
|
write_byte(addr, val8);
|
|
/* clear carry and overflow; check zero, sign, parity */
|
|
R_EFLAGS &= ~PSL_C | ~PSL_V;
|
|
if (val8 == 0)
|
|
R_EFLAGS |= PSL_Z;
|
|
if (val8 % 2 != 0)
|
|
R_EFLAGS |= PSL_PF;
|
|
if (val8 & 0x80)
|
|
R_EFLAGS |= PSL_N;
|
|
ip += 2 + instrlen;
|
|
break;
|
|
case 0x22: /* and r8, r/m8 */
|
|
addr = decode_modrm(cs + ip, *seg, REGS, &instrlen);
|
|
r8 = reg8(cs[ip + 1], REGS);
|
|
*r8 &= read_byte(addr);
|
|
/* clear carry and overflow; check zero, sign, parity */
|
|
R_EFLAGS &= ~PSL_C | ~PSL_V;
|
|
if (*r8 == 0)
|
|
R_EFLAGS |= PSL_Z;
|
|
if (*r8 % 2 != 0)
|
|
R_EFLAGS |= PSL_PF;
|
|
if (*r8 & 0x80)
|
|
R_EFLAGS |= PSL_N;
|
|
ip += 2 + instrlen;
|
|
break;
|
|
case 0x26: /* Segment Override ES */
|
|
seg = &R_ES;
|
|
prefix = 1;
|
|
ip++;
|
|
break;
|
|
case 0x2e: /* Segment Override CS */
|
|
seg = &R_CS;
|
|
prefix = 1;
|
|
ip++;
|
|
break;
|
|
case 0x36: /* Segment Override SS */
|
|
seg = &R_SS;
|
|
prefix = 1;
|
|
ip++;
|
|
break;
|
|
case 0x3e: /* Segment Override DS */
|
|
seg = &R_DS;
|
|
prefix = 1;
|
|
ip++;
|
|
break;
|
|
case 0x64: /* Segment Override FS */
|
|
seg = &R_FS;
|
|
prefix = 1;
|
|
ip++;
|
|
break;
|
|
case 0x65: /* Segment Override GS */
|
|
seg = &R_GS;
|
|
prefix = 1;
|
|
ip++;
|
|
break;
|
|
case 0x88: /* mov r/m8, r8 */
|
|
addr = decode_modrm(cs + ip, *seg, REGS, &instrlen);
|
|
write_byte(addr, *reg8(cs[ip + 1], REGS));
|
|
ip += 2 + instrlen;
|
|
break;
|
|
case 0x8a: /* mov r8, r/m8 */
|
|
addr = decode_modrm(cs + ip, *seg, REGS, &instrlen);
|
|
r8 = reg8(cs[ip + 1], REGS);
|
|
*r8 = read_byte(addr);
|
|
ip += 2 + instrlen;
|
|
break;
|
|
case 0xc6: /* mov r/m8, imm8 */
|
|
addr = decode_modrm(cs + ip, *seg, REGS, &instrlen);
|
|
write_byte(addr, cs[ip + 2 + instrlen]);
|
|
ip += 2 + instrlen + 1;
|
|
break;
|
|
case 0xc7: /* mov r/m32/16, imm32/16 */
|
|
addr = decode_modrm(cs + ip, *seg, REGS, &instrlen);
|
|
val16 = *(u_int16_t *)&cs[ip + 2 + instrlen];
|
|
write_word(addr, val16);
|
|
ip += 2 + instrlen + 2;
|
|
break;
|
|
case 0xa4: /* movs m8, m8 */
|
|
write_byte(MAKEPTR(R_ES, R_DI), read_byte(MAKEPTR(*seg, R_SI)));
|
|
dir = (R_EFLAGS & PSL_D) ? -1 : 1;
|
|
R_DI += dir;
|
|
R_SI += dir;
|
|
ip++;
|
|
break;
|
|
case 0xaa: /* stos m8 */
|
|
addr = MAKEPTR(R_ES, R_DI);
|
|
write_byte(addr, R_AL);
|
|
R_DI += (R_EFLAGS & PSL_D) ? -1 : 1;
|
|
ip++;
|
|
break;
|
|
case 0xab: /* stos m32/16*/
|
|
addr = MAKEPTR(R_ES, R_DI);
|
|
write_word(addr, R_AX);
|
|
R_DI += (R_EFLAGS & PSL_D) ? -2 : 2;
|
|
ip++;
|
|
break;
|
|
case 0xf3: /* rep */
|
|
switch (cs[++ip]) {
|
|
case 0xa4: /* movs m8, m8 */
|
|
/* XXX Possible optimization: if both source and target
|
|
addresses lie within the video memory and write mode 1 is
|
|
selected, we can use memcpy(). */
|
|
dir = (R_EFLAGS & PSL_D) ? -1 : 1;
|
|
addr = MAKEPTR(R_ES, R_DI);
|
|
toaddr = MAKEPTR(*seg, R_SI);
|
|
for (i = R_CX; i > 0; i--) {
|
|
write_byte(addr, read_byte(toaddr));
|
|
addr += dir;
|
|
toaddr += dir;
|
|
}
|
|
PUTPTR(R_ES, R_DI, addr);
|
|
PUTPTR(*seg, R_SI, toaddr);
|
|
ip++;
|
|
break;
|
|
case 0xaa: /* stos m8 */
|
|
/* direction */
|
|
dir = (R_EFLAGS & PSL_D) ? -1 : 1;
|
|
addr = MAKEPTR(R_ES, R_DI);
|
|
for (i = R_CX; i > 0; i--) {
|
|
write_byte(addr, R_AL);
|
|
addr += dir;
|
|
}
|
|
PUTPTR(R_ES, R_DI, addr);
|
|
ip++;
|
|
break;
|
|
case 0xab: /* stos m32/16 */
|
|
/* direction */
|
|
dir = (R_EFLAGS & PSL_D) ? -2 : 2;
|
|
addr = MAKEPTR(R_ES, R_DI);
|
|
for (i = R_CX; i > 0; i--) {
|
|
write_word(addr, R_AX);
|
|
addr += dir;
|
|
}
|
|
PUTPTR(R_ES, R_DI, addr);
|
|
ip++;
|
|
break;
|
|
default:
|
|
R_IP = --ip; /* Move IP back to the 'rep' instruction. */
|
|
return -1;
|
|
}
|
|
break;
|
|
default:
|
|
/* Unknown instruction, get out of here and let trap.c:sigbus()
|
|
catch it. */
|
|
return -1;
|
|
}
|
|
R_IP = ip;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Decode the ModR/M byte. Returns the memory address of the operand. 'c'
|
|
points to the current instruction, 'seg' contains the value for the current
|
|
base segment; this is usually 'DS', but may have been changed by a segment
|
|
override prefix. We return the length of the current instruction in
|
|
'instrlen' so we can adjust 'IP' on return.
|
|
|
|
XXX We will probably need a second function for 32-bit instructions.
|
|
|
|
XXX We do not check for undefined combinations, like Mod=01, R/M=001. */
|
|
static u_int32_t
|
|
decode_modrm(u_int8_t *c, u_int16_t seg, regcontext_t *REGS, int *instrlen)
|
|
{
|
|
u_int32_t addr = 0; /* absolute address */
|
|
int16_t dspl = 0; /* displacement, signed */
|
|
*instrlen = 0;
|
|
|
|
switch (c[1] & 0xc0) { /* decode Mod */
|
|
case 0x00: /* DS:[reg] */
|
|
/* 'reg' is selected in the R/M bits */
|
|
break;
|
|
case 0x40: /* 8 bit displacement */
|
|
dspl = (int16_t)(int8_t)c[2];
|
|
*instrlen = 1;
|
|
break;
|
|
case 0x80: /* 16 bit displacement */
|
|
dspl = *(int16_t *)&c[2];
|
|
*instrlen = 2;
|
|
break;
|
|
case 0xc0: /* reg in R/M */
|
|
if (c[0] & 1) /* 16-bit reg */
|
|
return *reg16(c[1], REGS);
|
|
else /* 8-bit reg */
|
|
return *reg8(c[1], REGS);
|
|
break;
|
|
}
|
|
|
|
switch (c[1] & 0x07) { /* decode R/M */
|
|
case 0x00:
|
|
addr = MAKEPTR(seg, R_BX + R_SI);
|
|
break;
|
|
case 0x01:
|
|
addr = MAKEPTR(seg, R_BX + R_DI);
|
|
break;
|
|
case 0x02:
|
|
addr = MAKEPTR(seg, R_BP + R_SI);
|
|
break;
|
|
case 0x03:
|
|
addr = MAKEPTR(seg, R_BP + R_DI);
|
|
break;
|
|
case 0x04:
|
|
addr = MAKEPTR(seg, R_SI);
|
|
break;
|
|
case 0x05:
|
|
addr = MAKEPTR(seg, R_DI);
|
|
break;
|
|
case 0x06:
|
|
if ((c[1] & 0xc0) >= 0x40)
|
|
addr += R_BP;
|
|
else {
|
|
addr = MAKEPTR(seg, *(int16_t *)&c[2]);
|
|
*instrlen = 2;
|
|
}
|
|
break;
|
|
case 0x07:
|
|
addr = MAKEPTR(seg, R_BX + dspl);
|
|
break;
|
|
}
|
|
|
|
return addr;
|
|
}
|
|
|
|
static u_int8_t *
|
|
reg8(u_int8_t c, regcontext_t *REGS)
|
|
{
|
|
u_int8_t *r8[] = {&R_AL, &R_CL, &R_DL, &R_BL,
|
|
&R_AH, &R_CH, &R_DH, &R_BH};
|
|
|
|
/* select 'rrr' bits in ModR/M */
|
|
return r8[(c & 0x34) >> 3];
|
|
}
|
|
|
|
static u_int16_t *
|
|
reg16(u_int8_t c, regcontext_t *REGS)
|
|
{
|
|
u_int16_t *r16[] = {&R_AX, &R_CX, &R_DX, &R_BX,
|
|
&R_SP, &R_BP, &R_SI, &R_DI};
|
|
|
|
return r16[(c & 0x34) >> 3];
|
|
}
|
|
|
|
#if 0
|
|
/* not yet */
|
|
static u_int32_t *
|
|
reg32(u_int8_t c, regcontext_t *REGS)
|
|
{
|
|
u_int32_t *r32[] = {&R_EAX, &R_ECX, &R_EDX, &R_EBX,
|
|
&R_ESP, &R_EBP, &R_ESI, &R_EDI};
|
|
|
|
return r32[(c & 0x34) >> 3];
|
|
}
|
|
#endif
|
|
|
|
/* Read an 8-bit value from the location specified by 'addr'. If 'addr' lies
|
|
within the video memory, we call 'video.c:vga_read()'. */
|
|
static u_int8_t
|
|
read_byte(u_int32_t addr)
|
|
{
|
|
if (addr >= 0xa0000 && addr < 0xb0000)
|
|
return vga_read(addr);
|
|
else
|
|
return *(u_int8_t *)addr;
|
|
}
|
|
|
|
/* Write an 8-bit value to the location specified by 'addr'. If 'addr' lies
|
|
within the video memory region, we call 'video.c:vga_write()'. */
|
|
static void
|
|
write_byte(u_int32_t addr, u_int8_t val)
|
|
{
|
|
if (addr >= 0xa0000 && addr < 0xb0000)
|
|
vga_write(addr, val);
|
|
else
|
|
*(u_int8_t *)addr = val;
|
|
|
|
return;
|
|
}
|
|
|
|
/* Write a 16-bit value to the location specified by 'addr'. If 'addr' lies
|
|
within the video memory region, we call 'video.c:vga_write()'. */
|
|
static void
|
|
write_word(u_int32_t addr, u_int16_t val)
|
|
{
|
|
if (addr >= 0xa0000 && addr < 0xb0000) {
|
|
vga_write(addr, (u_int8_t)(val & 0xff));
|
|
vga_write(addr + 1, (u_int8_t)((val & 0xff00) >> 8));
|
|
} else
|
|
*(u_int16_t *)addr = val;
|
|
|
|
return;
|
|
}
|