freebsd-skq/sys/dev/mii
Marius Strobl 21211c45f0 - Also probe DP83865, which is an is an ultra low power version
of the DP83861 and DP83891.
- Reset the PHY during attach so it's in a known state.
- Add a comment describing why we hardwire 10baseT support in
  the BMSR.
- Always explicitly set IFM_HDX for half-duplex. [1]

Obtained from:	OpenBSD [1]
MFC after:	2 weeks
2009-06-13 23:27:04 +00:00
..
acphy.c
acphyreg.h
amphy.c
amphyreg.h
atphy.c Use auto-negotiation for manual media type selection. This fixes 2008-10-25 06:39:17 +00:00
atphyreg.h Add Attansic/Atheros F1 PHY driver. 2008-05-19 01:12:10 +00:00
axphy.c New PHY driver for the internal PHY found in the AX88790. There's a 2009-03-30 16:01:09 +00:00
axphyreg.h New PHY driver for the internal PHY found in the AX88790. There's a 2009-03-30 16:01:09 +00:00
bmtphy.c
bmtphyreg.h
brgphy.c Restore link state handling which was broken in rev 1.69. 2008-08-12 00:57:39 +00:00
brgphyreg.h
ciphy.c Correct PHY description and OUI of VSC8211. Previously VSC8211 was 2008-10-23 01:27:15 +00:00
ciphyreg.h
e1000phy.c Program LED registers for 88E1116/88E1149 PHYs. These PHYs are 2009-06-02 00:30:30 +00:00
e1000phyreg.h Program LED registers for 88E1116/88E1149 PHYs. These PHYs are 2009-06-02 00:30:30 +00:00
exphy.c
gentbi.c
icsphy.c
icsphyreg.h
inphy.c
inphyreg.h
ip1000phy.c For IP1001 PHYs, read auto-negotiation advertisement register to 2009-03-09 08:17:46 +00:00
ip1000phyreg.h For IP1001 PHYs, read auto-negotiation advertisement register to 2009-03-09 08:17:46 +00:00
jmphy.c Add JMicron JMP202/JMP211 PHY driver. 2008-05-27 01:16:40 +00:00
jmphyreg.h Add JMicron JMP202/JMP211 PHY driver. 2008-05-27 01:16:40 +00:00
lxtphy.c Add support for the Apple Big Mac (BMAC) Ethernet controller, 2008-06-07 22:58:32 +00:00
lxtphyreg.h
mii_physubr.c
mii.c Revert bogusly committed file. 2008-08-23 07:46:58 +00:00
mii.h
miibus_if.m
miidevs - Also probe DP83865, which is an is an ultra low power version 2009-06-13 23:27:04 +00:00
miivar.h
mlphy.c Move the code that looks for the companion phy to a subroutine to make 2008-08-23 15:50:18 +00:00
nsgphy.c - Also probe DP83865, which is an is an ultra low power version 2009-06-13 23:27:04 +00:00
nsgphyreg.h
nsphy.c
nsphyreg.h
nsphyter.c
nsphyterreg.h
pnaphy.c
qsphy.c
qsphyreg.h
rgephy.c Fix a copy/paste error 2008-08-06 07:52:59 +00:00
rgephyreg.h Add RTL8211C(L) support. 2008-07-02 08:10:18 +00:00
rlphy.c
rlswitch.c
ruephy.c
ruephyreg.h
smcphy.c This is a rewritten driver for the SMSC LAN91C111. It's based in part on the 2008-06-06 05:00:49 +00:00
tdkphy.c
tdkphyreg.h
tlphy.c It turns out that my analysis of the error handling here was wrong. 2008-08-23 15:29:28 +00:00
tlphyreg.h
truephy.c Renamed the FRAMELEN macro to TRUEPHY_FRAMELEN as for powerpc 2008-11-28 23:44:13 +00:00
truephyreg.h Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit 2008-06-20 19:30:44 +00:00
ukphy_subr.c
ukphy.c
xmphy.c
xmphyreg.h