Alan Cox 702006ff76 To date, we have assumed that the TLB will only set the PG_M bit in a
PTE if that PTE has the PG_RW bit set.  However, this assumption does
not hold on recent processors from Intel.  For example, consider a PTE
that has the PG_RW bit set but the PG_M bit clear.  Suppose this PTE
is cached in the TLB and later the PG_RW bit is cleared in the PTE,
but the corresponding TLB entry is not (yet) invalidated.
Historically, upon a write access using this (stale) TLB entry, the
TLB would observe that the PG_RW bit had been cleared and initiate a
page fault, aborting the setting of the PG_M bit in the PTE.  Now,
however, P4- and Core2-family processors will set the PG_M bit before
observing that the PG_RW bit is clear and initiating a page fault.  In
other words, the write does not occur but the PG_M bit is still set.

The real impact of this difference is not that great.  Specifically,
we should no longer assert that any PTE with the PG_M bit set must
also have the PG_RW bit set, and we should ignore the state of the
PG_M bit unless the PG_RW bit is set.  However, these changes enable
me to remove a work-around from pmap_promote_pde(), the superpage
promotion procedure.

(Note: The AMD processors that we have tested, including the latest,
the Phenom, still exhibit the historical behavior.)

Acknowledgments: After I observed the problem, Stephan (ups) was
instrumental in characterizing the exact behavior of Intel's recent
TLBs.

Tested by: Peter Holm
2008-03-23 20:38:01 +00:00
..
2008-03-13 17:54:21 +00:00
2008-01-15 18:34:47 +00:00
2008-03-17 22:42:01 +00:00
2008-02-23 22:40:05 +00:00
2008-03-19 11:28:13 +00:00