freebsd-skq/sys/dev/ath
Adrian Chadd 0d327de13d Lay some groundwork for having this stuff hang off of AHB rather than
the CPU nexus.

* Add ahb as a possible bus attachment
* Lay a comment down to remind me or whoever else ends up trying
  to debug why the EEPROM isn't mapped in as to what's going on.
2015-03-02 02:14:44 +00:00
..
ath_dfs/null The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare 2013-10-26 17:58:36 +00:00
ath_hal Add a new HAL capability - required to compile the updated AR9300 2015-01-28 04:02:56 +00:00
ath_rate Cast everything to something longer than 32 bits so the sample mask 2015-01-28 04:44:42 +00:00
ah_osdep.c Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
ah_osdep.h
if_ath_ahb.c Lay some groundwork for having this stuff hang off of AHB rather than 2015-03-02 02:14:44 +00:00
if_ath_alq.c Support sending ATH_ALQ messages with no payload. 2013-05-13 21:17:27 +00:00
if_ath_alq.h Add ALQ beacon debugging. 2013-05-13 21:18:00 +00:00
if_ath_beacon.c Shut down RX before TX - in theory, this should make the chip less likely 2014-08-23 18:55:51 +00:00
if_ath_beacon.h Bring over some initial power save management support, reset path 2014-04-30 02:19:41 +00:00
if_ath_btcoex.c Until there's a full MCI implementation - just implement a placeholder 2015-01-17 00:02:18 +00:00
if_ath_btcoex.h Bring over the initial static bluetooth coexistence configuration 2013-06-07 09:02:02 +00:00
if_ath_debug.c Pull in r267961 and r267973 again. Fix for issues reported will follow. 2014-06-28 03:56:17 +00:00
if_ath_debug.h Bring over some initial power save management support, reset path 2014-04-30 02:19:41 +00:00
if_ath_keycache.c Bring over some initial power save management support, reset path 2014-04-30 02:19:41 +00:00
if_ath_keycache.h
if_ath_led.c Bring over some initial power save management support, reset path 2014-04-30 02:19:41 +00:00
if_ath_led.h
if_ath_lna_div.c Add initial support for the AR9485 CUS198 / CUS230 variants. 2014-09-30 03:19:29 +00:00
if_ath_lna_div.h Initial AR9485/AR933x 1x1 LNA diversity work. 2013-06-14 03:42:10 +00:00
if_ath_misc.h Add tracking for self-generated frames when the VAP is in sleep state. 2014-05-02 00:48:09 +00:00
if_ath_pci_devlist.h Add a missing file from the last commit. 2014-09-30 05:50:34 +00:00
if_ath_pci.c Move the lock destruction/creation to earlier in the process - if 2015-02-14 18:14:45 +00:00
if_ath_rx_edma.c Fix up the EDMA RX setup path to correctly initialise and reset the RX FIFO. 2014-09-20 01:22:17 +00:00
if_ath_rx_edma.h
if_ath_rx.c Mechanically convert to if_inc_counter(). 2014-09-18 20:47:39 +00:00
if_ath_rx.h Fix the busdma logic to work with EDMA chipsets when using bounce 2013-04-04 08:21:56 +00:00
if_ath_spectral.c The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare 2013-10-26 17:58:36 +00:00
if_ath_spectral.h Add a new (skeleton) spectral mode manager module. 2013-01-02 03:59:02 +00:00
if_ath_sysctl.c Bump the valid GPIO range for rfkill up from 8 to 16. 2014-12-23 18:48:45 +00:00
if_ath_sysctl.h
if_ath_tdma.c Add casts to have it compile on amd64 without complaining about 2014-05-07 19:07:45 +00:00
if_ath_tdma.h
if_ath_tsf.h
if_ath_tx_edma.c Quieten the RX/TX descriptor and FIFO setup debugging. 2014-05-05 08:00:50 +00:00
if_ath_tx_edma.h
if_ath_tx_ht.c Implement my first cut at "correct" node power-save and 2013-05-15 18:33:05 +00:00
if_ath_tx_ht.h Implement my first cut at "correct" node power-save and 2013-05-15 18:33:05 +00:00
if_ath_tx.c Mechanically convert to if_inc_counter(). 2014-09-18 20:47:39 +00:00
if_ath_tx.h Implement a separate hardware queue threshold for aggregate and non-aggr 2013-05-21 18:13:57 +00:00
if_ath.c Check the right value correctly. 2015-01-16 01:52:26 +00:00
if_athdfs.h Add a method to explicitly disable radar reporting if required. 2013-01-02 01:36:10 +00:00
if_athioctl.h Implement my first cut at "correct" node power-save and 2013-05-15 18:33:05 +00:00
if_athrate.h Update the rate series setup code to use the decisions already made in 2013-04-17 07:21:30 +00:00
if_athvar.h Add initial support for the AR9485 CUS198 / CUS230 variants. 2014-09-30 03:19:29 +00:00