yongari a635b04c3f Save extended address register prior to switching to 1000BASE-X ...

only mode and restore original value of extended address register
instead of overwriting it with page 1. There are still instance
information passing issue(e.g configured media type: fiber or
copper) from driver to PHY layer but this change make the selected
PHY work with 88E1112 PHY.

Reported by:	Krzysztof Jedruczyk < beaker <at> hot dot pl >
Tested by:	Krzysztof Jedruczyk < beaker <at> hot dot pl >

2008-09-30 08:18:38 +00:00

..

acphy.c

Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL

2007-01-12 22:59:38 +00:00

acphyreg.h

…

amphy.c

Fix a typo in a comment.

2008-01-27 01:11:57 +00:00

amphyreg.h

…

atphy.c

Add Attansic/Atheros F1 PHY driver.

2008-05-19 01:12:10 +00:00

atphyreg.h

Add Attansic/Atheros F1 PHY driver.

2008-05-19 01:12:10 +00:00

bmtphy.c

…

bmtphyreg.h

…

brgphy.c

Restore link state handling which was broken in rev 1.69.

2008-08-12 00:57:39 +00:00

brgphyreg.h

Add support for the BCM5906[M] adapters. These adapters only support

2008-04-29 19:47:13 +00:00

ciphy.c

Add Vitesse VSC8211 PHY which is found on Planex GU-1000T.

2008-09-30 07:30:05 +00:00

ciphyreg.h

Add support Vitesse VSC8601 PHY that is found on nVidia network

2007-06-06 06:55:49 +00:00

e1000phy.c

Save extended address register prior to switching to 1000BASE-X

2008-09-30 08:18:38 +00:00

e1000phyreg.h

Add 88E1116/88E1116R PHY support code that takes the PHY out of

2007-10-29 05:50:22 +00:00

exphy.c

- Take advantage of mii_phy_dev_probe().

2007-01-12 23:17:43 +00:00

gentbi.c

- Remove MIIF_NOISOLATE; there's generally no reason to let gentbi(4)

2007-10-29 21:11:55 +00:00

icsphy.c

Add icsphy(4), Integrated Circuit Systems PHY driver, ported from

2007-06-11 02:04:50 +00:00

icsphyreg.h

Add icsphy(4), Integrated Circuit Systems PHY driver, ported from

2007-06-11 02:04:50 +00:00

inphy.c

…

inphyreg.h

…

ip1000phy.c

Add support for IC Plus IP1001 PHY.

2008-04-05 00:52:07 +00:00

ip1000phyreg.h

Add support for IC Plus IP1001 PHY.

2008-04-05 00:52:07 +00:00

jmphy.c

Add JMicron JMP202/JMP211 PHY driver.

2008-05-27 01:16:40 +00:00

jmphyreg.h

Add JMicron JMP202/JMP211 PHY driver.

2008-05-27 01:16:40 +00:00

lxtphy.c

Add support for the Apple Big Mac (BMAC) Ethernet controller,

2008-06-07 22:58:32 +00:00

lxtphyreg.h

…

mii_physubr.c

Remove mii_media_from_bmcr(); all previous users have been converted to

2007-01-13 00:14:45 +00:00

mii.c

Revert bogusly committed file.

2008-08-23 07:46:58 +00:00

mii.h

…

miibus_if.m

…

miidevs

Add Vitesse VSC8211 PHY which is found on Planex GU-1000T.

2008-09-30 07:30:05 +00:00

miivar.h

Remove mii_media_from_bmcr(); all previous users have been converted to

2007-01-13 00:14:45 +00:00

mlphy.c

Move the code that looks for the companion phy to a subroutine to make

2008-08-23 15:50:18 +00:00

nsgphy.c

…

nsgphyreg.h

…

nsphy.c

- Fix a typo in a comment.

2008-01-27 01:30:02 +00:00

nsphyreg.h

…

nsphyter.c

Add a driver for the National Semiconductor DP83815, DP83843 and

2008-01-27 01:10:41 +00:00

nsphyterreg.h

Add a driver for the National Semiconductor DP83815, DP83843 and

2008-01-27 01:10:41 +00:00

pnaphy.c

…

qsphy.c

…

qsphyreg.h

…

rgephy.c

Fix a copy/paste error

2008-08-06 07:52:59 +00:00

rgephyreg.h

Add RTL8211C(L) support.

2008-07-02 08:10:18 +00:00

rlphy.c

IEEE 802.3 Annex 28B.3 explicitly specifies the following relative

2007-11-16 10:25:36 +00:00

rlswitch.c

…

ruephy.c

- Take advantage of mii_phy_dev_probe() and mii_phy_setmedia().

2007-01-13 00:06:41 +00:00

ruephyreg.h

…

smcphy.c

This is a rewritten driver for the SMSC LAN91C111. It's based in part on the

2008-06-06 05:00:49 +00:00

tdkphy.c

IEEE 802.3 Annex 28B.3 explicitly specifies the following relative

2007-11-16 10:25:36 +00:00

tdkphyreg.h

…

tlphy.c

It turns out that my analysis of the error handling here was wrong.

2008-08-23 15:29:28 +00:00

tlphyreg.h

…

truephy.c

Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit

2008-06-20 19:30:44 +00:00

truephyreg.h

Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit

2008-06-20 19:30:44 +00:00

ukphy_subr.c

IEEE 802.3 Annex 28B.3 explicitly specifies the following relative

2007-11-16 10:25:36 +00:00

ukphy.c

- Don't set MIIF_NOISOLATE so ukphy(4) can be used in configurations with

2007-01-20 00:52:29 +00:00

xmphy.c

…

xmphyreg.h

…