freebsd kernel with SKQ
90d2dfab19
This code merge adds a pNFS service to the NFSv4.1 server. Although it is a large commit it should not affect behaviour for a non-pNFS NFS server. Some documentation on how this works can be found at: http://people.freebsd.org/~rmacklem/pnfs-planb-setup.txt and will hopefully be turned into a proper document soon. This is a merge of the kernel code. Userland and man page changes will come soon, once the dust settles on this merge. It has passed a "make universe", so I hope it will not cause build problems. It also adds NFSv4.1 server support for the "current stateid". Here is a brief overview of the pNFS service: A pNFS service separates the Read/Write oeprations from all the other NFSv4.1 Metadata operations. It is hoped that this separation allows a pNFS service to be configured that exceeds the limits of a single NFS server for either storage capacity and/or I/O bandwidth. It is possible to configure mirroring within the data servers (DSs) so that the data storage file for an MDS file will be mirrored on two or more of the DSs. When this is used, failure of a DS will not stop the pNFS service and a failed DS can be recovered once repaired while the pNFS service continues to operate. Although two way mirroring would be the norm, it is possible to set a mirroring level of up to four or the number of DSs, whichever is less. The Metadata server will always be a single point of failure, just as a single NFS server is. A Plan B pNFS service consists of a single MetaData Server (MDS) and K Data Servers (DS), all of which are recent FreeBSD systems. Clients will mount the MDS as they would a single NFS server. When files are created, the MDS creates a file tree identical to what a single NFS server creates, except that all the regular (VREG) files will be empty. As such, if you look at the exported tree on the MDS directly on the MDS server (not via an NFS mount), the files will all be of size 0. Each of these files will also have two extended attributes in the system attribute name space: pnfsd.dsfile - This extended attrbute stores the information that the MDS needs to find the data storage file(s) on DS(s) for this file. pnfsd.dsattr - This extended attribute stores the Size, AccessTime, ModifyTime and Change attributes for the file, so that the MDS doesn't need to acquire the attributes from the DS for every Getattr operation. For each regular (VREG) file, the MDS creates a data storage file on one (or more if mirroring is enabled) of the DSs in one of the "dsNN" subdirectories. The name of this file is the file handle of the file on the MDS in hexadecimal so that the name is unique. The DSs use subdirectories named "ds0" to "dsN" so that no one directory gets too large. The value of "N" is set via the sysctl vfs.nfsd.dsdirsize on the MDS, with the default being 20. For production servers that will store a lot of files, this value should probably be much larger. It can be increased when the "nfsd" daemon is not running on the MDS, once the "dsK" directories are created. For pNFS aware NFSv4.1 clients, the FreeBSD server will return two pieces of information to the client that allows it to do I/O directly to the DS. DeviceInfo - This is relatively static information that defines what a DS is. The critical bits of information returned by the FreeBSD server is the IP address of the DS and, for the Flexible File layout, that NFSv4.1 is to be used and that it is "tightly coupled". There is a "deviceid" which identifies the DeviceInfo. Layout - This is per file and can be recalled by the server when it is no longer valid. For the FreeBSD server, there is support for two types of layout, call File and Flexible File layout. Both allow the client to do I/O on the DS via NFSv4.1 I/O operations. The Flexible File layout is a more recent variant that allows specification of mirrors, where the client is expected to do writes to all mirrors to maintain them in a consistent state. The Flexible File layout also allows the client to report I/O errors for a DS back to the MDS. The Flexible File layout supports two variants referred to as "tightly coupled" vs "loosely coupled". The FreeBSD server always uses the "tightly coupled" variant where the client uses the same credentials to do I/O on the DS as it would on the MDS. For the "loosely coupled" variant, the layout specifies a synthetic user/group that the client uses to do I/O on the DS. The FreeBSD server does not do striping and always returns layouts for the entire file. The critical information in a layout is Read vs Read/Writea and DeviceID(s) that identify which DS(s) the data is stored on. At this time, the MDS generates File Layout layouts to NFSv4.1 clients that know how to do pNFS for the non-mirrored DS case unless the sysctl vfs.nfsd.default_flexfile is set non-zero, in which case Flexible File layouts are generated. The mirrored DS configuration always generates Flexible File layouts. For NFS clients that do not support NFSv4.1 pNFS, all I/O operations are done against the MDS which acts as a proxy for the appropriate DS(s). When the MDS receives an I/O RPC, it will do the RPC on the DS as a proxy. If the DS is on the same machine, the MDS/DS will do the RPC on the DS as a proxy and so on, until the machine runs out of some resource, such as session slots or mbufs. As such, DSs must be separate systems from the MDS. Tested by: james.rose@framestore.com Relnotes: yes |
||
|---|---|---|
| bin | ||
| cddl | ||
| contrib | ||
| crypto | ||
| etc | ||
| gnu | ||
| include | ||
| kerberos5 | ||
| lib | ||
| libexec | ||
| release | ||
| rescue | ||
| sbin | ||
| secure | ||
| share | ||
| stand | ||
| sys | ||
| targets | ||
| tests | ||
| tools | ||
| usr.bin | ||
| usr.sbin | ||
| .arcconfig | ||
| .arclint | ||
| .gitattributes | ||
| .gitignore | ||
| COPYRIGHT | ||
| LOCKS | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc1 | ||
| Makefile.libcompat | ||
| Makefile.sys.inc | ||
| ObsoleteFiles.inc | ||
| README | ||
| README.md | ||
| UPDATING | ||
FreeBSD Source:
This is the top level of the FreeBSD source directory. This file
was last revised on:
FreeBSD
FreeBSD is an operating system used to power modern servers, desktops, and embedded platforms. A large community has continually developed it for more than thirty years. Its advanced networking, security, and storage features have made FreeBSD the platform of choice for many of the busiest web sites and most pervasive embedded networking and storage devices.
For copyright information, please see the file COPYRIGHT in this directory. Additional copyright information also exists for some sources in this tree - please see the specific source directories for more information.
The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree. See build(7), config(8), https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html, and https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html for more information, including setting make(1) variables.
Source Roadmap:
bin System/user commands.
cddl Various commands and libraries under the Common Development
and Distribution License.
contrib Packages contributed by 3rd parties.
crypto Cryptography stuff (see crypto/README).
etc Template files for /etc.
gnu Various commands and libraries under the GNU Public License.
Please see gnu/COPYING* for more information.
include System include files.
kerberos5 Kerberos5 (Heimdal) package.
lib System libraries.
libexec System daemons.
release Release building Makefile & associated tools.
rescue Build system for statically linked /rescue utilities.
sbin System commands.
secure Cryptographic libraries and commands.
share Shared resources.
stand Boot loader sources.
sys Kernel sources.
sys/<arch>/conf Kernel configuration file
tests Regression tests which can be run by Kyua. See tests/README
for additional information.
tools Utilities for regression testing and miscellaneous tasks.
usr.bin User commands.
usr.sbin System administration commands.
For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see:
https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/current-stable.html