d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bebb40faf6
freebsd-skq/sys/contrib/alpine-hal/al_hal_unit_adapter_regs.h
zbb de365b338d Import Annapurna Labs Alpine HAL to sys/contrib/ 
Import from vendor-sys/alpine-hal/2.7
SVN rev.: 285432
HAL version: 2.7

Obtained from:  Semihalf
Sponsored by:   Annapurna Labs
2015-07-28 14:20:33 +00:00

315 lines
14 KiB
C
Raw Blame History

/*-
********************************************************************************
Copyright (C) 2015 Annapurna Labs Ltd.
This file may be licensed under the terms of the Annapurna Labs Commercial
License Agreement.
Alternatively, this file can be distributed under the terms of the GNU General
Public License V2 as published by the Free Software Foundation and can be
found at http://www.gnu.org/licenses/gpl-2.0.html
Alternatively, redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following conditions are
met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in
the documentation and/or other materials provided with the
distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
#ifndef __AL_HAL_UNIT_ADAPTER_REGS_H__
#define __AL_HAL_UNIT_ADAPTER_REGS_H__
#ifdef __cplusplus
extern "C" {
#endif
#define AL_PCI_COMMAND 0x04 /* 16 bits */
#define AL_PCI_COMMAND_IO 0x1 /* Enable response in I/O space */
#define AL_PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */
#define AL_PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */
#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */
#define AL_PCI_BASE_ADDRESS_SPACE_IO 0x01
#define AL_PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */
#define AL_PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */
#define AL_PCI_BASE_ADDRESS_DEVICE_ID 0x0c
#define AL_PCI_BASE_ADDRESS_0 0x10
#define AL_PCI_BASE_ADDRESS_0_HI 0x14
#define AL_PCI_BASE_ADDRESS_2 0x18
#define AL_PCI_BASE_ADDRESS_2_HI 0x1c
#define AL_PCI_BASE_ADDRESS_4 0x20
#define AL_PCI_BASE_ADDRESS_4_HI 0x24
#define AL_PCI_EXP_ROM_BASE_ADDRESS 0x30
#define AL_PCI_AXI_CFG_AND_CTR_0 0x110
#define AL_PCI_AXI_CFG_AND_CTR_1 0x130
#define AL_PCI_AXI_CFG_AND_CTR_2 0x150
#define AL_PCI_AXI_CFG_AND_CTR_3 0x170
#define AL_PCI_APP_CONTROL 0x220
#define AL_PCI_SRIOV_TOTAL_AND_INITIAL_VFS 0x30c
#define AL_PCI_VF_BASE_ADDRESS_0 0x324
#define AL_PCI_EXP_CAP_BASE 0x40
#define AL_PCI_EXP_DEVCAP 4 /* Device capabilities */
#define AL_PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */
#define AL_PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */
#define AL_PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */
#define AL_PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */
#define AL_PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */
#define AL_PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */
#define AL_PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */
#define AL_PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */
#define AL_PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */
#define AL_PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */
#define AL_PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */
#define AL_PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */
#define AL_PCI_EXP_DEVCTL 8 /* Device Control */
#define AL_PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */
#define AL_PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */
#define AL_PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */
#define AL_PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */
#define AL_PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */
#define AL_PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */
#define AL_PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */
#define AL_PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */
#define AL_PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */
#define AL_PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */
#define AL_PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */
#define AL_PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */
#define AL_PCI_EXP_DEVSTA 0xA /* Device Status */
#define AL_PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */
#define AL_PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */
#define AL_PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */
#define AL_PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */
#define AL_PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */
#define AL_PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */
#define AL_PCI_EXP_LNKCAP 0xC /* Link Capabilities */
#define AL_PCI_EXP_LNKCAP_SLS 0xf /* Supported Link Speeds */
#define AL_PCI_EXP_LNKCAP_SLS_2_5GB 0x1 /* LNKCAP2 SLS Vector bit 0 (2.5GT/s) */
#define AL_PCI_EXP_LNKCAP_SLS_5_0GB 0x2 /* LNKCAP2 SLS Vector bit 1 (5.0GT/s) */
#define AL_PCI_EXP_LNKCAP_MLW 0x3f0 /* Maximum Link Width */
#define AL_PCI_EXP_LNKCAP_ASPMS 0xc00 /* ASPM Support */
#define AL_PCI_EXP_LNKCAP_L0SEL 0x7000 /* L0s Exit Latency */
#define AL_PCI_EXP_LNKCAP_L1EL 0x38000 /* L1 Exit Latency */
#define AL_PCI_EXP_LNKCAP_CLKPM 0x40000 /* L1 Clock Power Management */
#define AL_PCI_EXP_LNKCAP_SDERC 0x80000 /* Surprise Down Error Reporting Capable */
#define AL_PCI_EXP_LNKCAP_DLLLARC 0x100000 /* Data Link Layer Link Active Reporting Capable */
#define AL_PCI_EXP_LNKCAP_LBNC 0x200000 /* Link Bandwidth Notification Capability */
#define AL_PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */
#define AL_PCI_EXP_LNKCTL 0x10 /* Link Control */
#define AL_PCI_EXP_LNKCTL_LNK_DIS 0x4 /* Link Disable Status */
#define AL_PCI_EXP_LNKCTL_LNK_RTRN 0x5 /* Link Retrain Status */
#define AL_PCI_EXP_LNKSTA 0x12 /* Link Status */
#define AL_PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */
#define AL_PCI_EXP_LNKSTA_CLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */
#define AL_PCI_EXP_LNKSTA_CLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */
#define AL_PCI_EXP_LNKSTA_CLS_8_0GB 0x03 /* Current Link Speed 8.0GT/s */
#define AL_PCI_EXP_LNKSTA_NLW 0x03f0 /* Nogotiated Link Width */
#define AL_PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */
#define AL_PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */
#define AL_PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */
#define AL_PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */
#define AL_PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */
#define AL_PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */
#define AL_PCI_EXP_LNKCTL2 0x30 /* Link Control 2 */
#define AL_PCI_MSIX_MSGCTRL 0 /* MSIX message control reg */
#define AL_PCI_MSIX_MSGCTRL_TBL_SIZE 0x7ff /* MSIX table size */
#define AL_PCI_MSIX_MSGCTRL_TBL_SIZE_SHIFT 16 /* MSIX table size shift */
#define AL_PCI_MSIX_MSGCTRL_EN 0x80000000 /* MSIX enable */
#define AL_PCI_MSIX_MSGCTRL_MASK 0x40000000 /* MSIX mask */
#define AL_PCI_MSIX_TABLE 0x4 /* MSIX table offset and bar reg */
#define AL_PCI_MSIX_TABLE_OFFSET 0xfffffff8 /* MSIX table offset */
#define AL_PCI_MSIX_TABLE_BAR 0x7 /* MSIX table BAR */
#define AL_PCI_MSIX_PBA 0x8 /* MSIX pba offset and bar reg */
#define AL_PCI_MSIX_PBA_OFFSET 0xfffffff8 /* MSIX pba offset */
#define AL_PCI_MSIX_PBA_BAR 0x7 /* MSIX pba BAR */
/* Adapter power management register 0 */
#define AL_ADAPTER_PM_0 0x80
#define AL_ADAPTER_PM_0_PM_NEXT_CAP_MASK 0xff00
#define AL_ADAPTER_PM_0_PM_NEXT_CAP_SHIFT 8
#define AL_ADAPTER_PM_0_PM_NEXT_CAP_VAL_MSIX 0x90
/* Adapter power management register 1 */
#define AL_ADAPTER_PM_1 0x84
#define AL_ADAPTER_PM_1_PME_EN 0x100 /* PM enable */
#define AL_ADAPTER_PM_1_PWR_STATE_MASK 0x3 /* PM state mask */
#define AL_ADAPTER_PM_1_PWR_STATE_D3 0x3 /* PM D3 state */
/* Sub Master Configuration & Control */
#define AL_ADAPTER_SMCC 0x110
#define AL_ADAPTER_SMCC_CONF_2 0x114
/* Interrupt_Cause register */
#define AL_ADAPTER_INT_CAUSE 0x1B0
#define AL_ADAPTER_INT_CAUSE_WR_ERR AL_BIT(1)
#define AL_ADAPTER_INT_CAUSE_RD_ERR AL_BIT(0)
/* AXI_Master_Write_Error_Attribute_Latch register */
/* AXI_Master_Read_Error_Attribute_Latch register */
#define AL_ADAPTER_AXI_MSTR_WR_ERR_ATTR 0x1B4
#define AL_ADAPTER_AXI_MSTR_RD_ERR_ATTR 0x1B8
#define AL_ADAPTER_AXI_MSTR_RD_WR_ERR_ATTR_COMP_STAT_MASK AL_FIELD_MASK(1, 0)
#define AL_ADAPTER_AXI_MSTR_RD_WR_ERR_ATTR_COMP_STAT_SHIFT 0
#define AL_ADAPTER_AXI_MSTR_RD_WR_ERR_ATTR_MSTR_ID_MASK AL_FIELD_MASK(4, 2)
#define AL_ADAPTER_AXI_MSTR_RD_WR_ERR_ATTR_MSTR_ID_SHIFT 2
#define AL_ADAPTER_AXI_MSTR_RD_WR_ERR_ATTR_ADDR_TO AL_BIT(8)
#define AL_ADAPTER_AXI_MSTR_RD_WR_ERR_ATTR_COMP_ERR AL_BIT(9)
#define AL_ADAPTER_AXI_MSTR_RD_WR_ERR_ATTR_COMP_TO AL_BIT(10)
#define AL_ADAPTER_AXI_MSTR_RD_WR_ERR_ATTR_ERR_BLK AL_BIT(11)
#define AL_ADAPTER_AXI_MSTR_RD_ERR_ATTR_RD_PARITY_ERR AL_BIT(12)
/* Interrupt_Cause_mask register */
#define AL_ADAPTER_INT_CAUSE_MASK 0x1BC
#define AL_ADAPTER_INT_CAUSE_MASK_WR_ERR AL_BIT(1)
#define AL_ADAPTER_INT_CAUSE_MASK_RD_ERR AL_BIT(0)
/* AXI_Master_write_error_address_Latch register */
#define AL_ADAPTER_AXI_MSTR_WR_ERR_LO_LATCH 0x1C0
/* AXI_Master_write_error_address_high_Latch register */
#define AL_ADAPTER_AXI_MSTR_WR_ERR_HI_LATCH 0x1C4
/* AXI_Master_read_error_address_Latch register */
#define AL_ADAPTER_AXI_MSTR_RD_ERR_LO_LATCH 0x1C8
/* AXI_Master_read_error_address_high_Latch register */
#define AL_ADAPTER_AXI_MSTR_RD_ERR_HI_LATCH 0x1CC
/* AXI_Master_Timeout register */
#define AL_ADAPTER_AXI_MSTR_TO 0x1D0
#define AL_ADAPTER_AXI_MSTR_TO_WR_MASK AL_FIELD_MASK(31, 16)
#define AL_ADAPTER_AXI_MSTR_TO_WR_SHIFT 16
#define AL_ADAPTER_AXI_MSTR_TO_RD_MASK AL_FIELD_MASK(15, 0)
#define AL_ADAPTER_AXI_MSTR_TO_RD_SHIFT 0
/*
* Generic control registers
*/
/* Control 0 */
#define AL_ADAPTER_GENERIC_CONTROL_0 0x1E0
/* Control 2 */
#define AL_ADAPTER_GENERIC_CONTROL_2 0x1E8
/* Control 3 */
#define AL_ADAPTER_GENERIC_CONTROL_3 0x1EC
/* Control 9 */
#define AL_ADAPTER_GENERIC_CONTROL_9 0x218
/* Control 10 */
#define AL_ADAPTER_GENERIC_CONTROL_10 0x21C
/* Control 11 */
#define AL_ADAPTER_GENERIC_CONTROL_11 0x220
/* Control 12 */
#define AL_ADAPTER_GENERIC_CONTROL_12 0x224
/* Control 13 */
#define AL_ADAPTER_GENERIC_CONTROL_13 0x228
/* Control 14 */
#define AL_ADAPTER_GENERIC_CONTROL_14 0x22C
/* Control 15 */
#define AL_ADAPTER_GENERIC_CONTROL_15 0x230
/* Control 16 */
#define AL_ADAPTER_GENERIC_CONTROL_16 0x234
/* Control 17 */
#define AL_ADAPTER_GENERIC_CONTROL_17 0x238
/* Control 18 */
#define AL_ADAPTER_GENERIC_CONTROL_18 0x23C
/* Control 19 */
#define AL_ADAPTER_GENERIC_CONTROL_19 0x240
/* Enable clock gating */
#define AL_ADAPTER_GENERIC_CONTROL_0_CLK_GATE_EN 0x01
/* When set, all transactions through the PCI conf & mem BARs get timeout */
#define AL_ADAPTER_GENERIC_CONTROL_0_ADAPTER_DIS 0x40
#define AL_ADAPTER_GENERIC_CONTROL_0_ETH_RESET_1GMAC AL_BIT(18)
#define AL_ADAPTER_GENERIC_CONTROL_0_ETH_RESET_1GMAC_ON_FLR AL_BIT(26)
/*
* SATA registers only
*/
/* Select 125MHz free running clock from IOFAB main PLL as SATA OOB clock
* instead of using power management ref clock
*/
#define AL_ADAPTER_GENERIC_CONTROL_10_SATA_OOB_CLK_SEL AL_BIT(26)
/* AXUSER selection and value per bit (1 = address, 0 = register) */
/* Rx */
#define AL_ADPTR_GEN_CTL_12_SATA_AWUSER_VAL_MASK AL_FIELD_MASK(15, 0)
#define AL_ADPTR_GEN_CTL_12_SATA_AWUSER_VAL_SHIFT 0
#define AL_ADPTR_GEN_CTL_12_SATA_AWUSER_SEL_MASK AL_FIELD_MASK(31, 16)
#define AL_ADPTR_GEN_CTL_12_SATA_AWUSER_SEL_SHIFT 16
/* Tx */
#define AL_ADPTR_GEN_CTL_13_SATA_ARUSER_VAL_MASK AL_FIELD_MASK(15, 0)
#define AL_ADPTR_GEN_CTL_13_SATA_ARUSER_VAL_SHIFT 0
#define AL_ADPTR_GEN_CTL_13_SATA_ARUSER_SEL_MASK AL_FIELD_MASK(31, 16)
#define AL_ADPTR_GEN_CTL_13_SATA_ARUSER_SEL_SHIFT 16
/* Central VMID enabler. If set, then each entry will be used as programmed */
#define AL_ADPTR_GEN_CTL_14_SATA_MSIX_VMID_SEL AL_BIT(0)
/* Allow access to store VMID values per entry */
#define AL_ADPTR_GEN_CTL_14_SATA_MSIX_VMID_ACCESS_EN AL_BIT(1)
/* VMID Address select */
/* Tx */
#define AL_ADPTR_GEN_CTL_14_SATA_VM_ARADDR_SEL_MASK AL_FIELD_MASK(13, 8)
#define AL_ADPTR_GEN_CTL_14_SATA_VM_ARADDR_SEL_SHIFT 8
/* Rx */
#define AL_ADPTR_GEN_CTL_14_SATA_VM_AWADDR_SEL_MASK AL_FIELD_MASK(21, 16)
#define AL_ADPTR_GEN_CTL_14_SATA_VM_AWADDR_SEL_SHIFT 16
/* Address Value */
/* Rx */
#define AL_ADPTR_GEN_CTL_15_SATA_VM_AWDDR_HI AL_FIELD_MASK(31, 0)
/* Tx */
#define AL_ADPTR_GEN_CTL_16_SATA_VM_ARDDR_HI AL_FIELD_MASK(31, 0)
/*
* ROB registers
*/
/* Read ROB_Enable, when disabled the read ROB is bypassed */
#define AL_ADPTR_GEN_CTL_19_READ_ROB_EN AL_BIT(0)
/* Read force in-order of every read transaction */
#define AL_ADPTR_GEN_CTL_19_READ_ROB_FORCE_INORDER AL_BIT(1)
/* Read software reset */
#define AL_ADPTR_GEN_CTL_19_READ_ROB_SW_RESET AL_BIT(15)
/* Write ROB_Enable, when disabled_the_Write ROB is bypassed */
#define AL_ADPTR_GEN_CTL_19_WRITE_ROB_EN AL_BIT(16)
/* Write force in-order of every write transaction */
#define AL_ADPTR_GEN_CTL_19_WRITE_ROB_FORCE_INORDER AL_BIT(17)
/* Write software reset */
#define AL_ADPTR_GEN_CTL_19_WRITE_ROB_SW_RESET AL_BIT(31)
#ifdef __cplusplus
}
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink