adrian 52c9fc5a85 [arge] add some extra MDIO debugging support ... * add an ANY debug level which will always echo the message if debugging is compiled in; * log MDIO transaction timeouts if debugging is compiled in; * the argemdio device is different to arge, so turning on MDIO debugging flags in arge->sc_debug doesn't help. Add a debug sysctl to argemdio as well so that MDIO transactions can be debugged. Tested: * AR9331		2016-08-05 17:16:35 +00:00
..
apb.c	Remove NULL checks after M_WAITOK allocations from sys/mips/.	2016-05-11 09:42:24 +00:00
apbvar.h
ar71xx_bus_space_reversed.c
ar71xx_bus_space_reversed.h
ar71xx_chip.c	Replace mips/sentry5 with mips/broadcom	2016-06-25 04:34:54 +00:00
ar71xx_chip.h
ar71xx_cpudef.h	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar71xx_ehci.c	EHCI: Make core reset and port speed reading more generic.	2016-01-28 14:11:59 +00:00
ar71xx_fixup.c	As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to	2016-02-22 09:02:20 +00:00
ar71xx_fixup.h
ar71xx_gpio.c	[ar71xx_gpio] handle AR934x and QCA953x GPIO OE polarity.	2016-07-31 06:51:34 +00:00
ar71xx_gpiovar.h	Implement GPIO_GET_BUS() method for all GPIO drivers.	2015-01-31 19:32:14 +00:00
ar71xx_macaddr.c	Begin moving support for board MAC addresses over to being explicitly defined.	2015-03-28 23:40:29 +00:00
ar71xx_macaddr.h	Begin moving support for board MAC addresses over to being explicitly defined.	2015-03-28 23:40:29 +00:00
ar71xx_machdep.c	Replace mips/sentry5 with mips/broadcom	2016-06-25 04:34:54 +00:00
ar71xx_ohci.c	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar71xx_pci_bus_space.c
ar71xx_pci_bus_space.h
ar71xx_pci.c	As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to	2016-02-22 09:02:20 +00:00
ar71xx_setup.c	Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros.	2015-11-16 04:28:00 +00:00
ar71xx_setup.h	Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros.	2015-11-16 04:28:00 +00:00
ar71xx_spi.c	As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to	2016-02-22 09:02:20 +00:00
ar71xx_wdog.c
ar71xxreg.h	Add a MII mode for SGMII.	2015-03-02 01:23:59 +00:00
ar91xx_chip.c	Replace mips/sentry5 with mips/broadcom	2016-06-25 04:34:54 +00:00
ar91xx_chip.h
ar91xxreg.h
ar724x_chip.c	Replace mips/sentry5 with mips/broadcom	2016-06-25 04:34:54 +00:00
ar724x_chip.h
ar724x_pci.c	As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to	2016-02-22 09:02:20 +00:00
ar724xreg.h	Note that the AR724x PCIe registers are actually from the PCI_CTRL	2015-03-21 05:59:45 +00:00
ar933x_chip.c	Reshuffle all of the DDR flush operations into a single switch/mux,	2015-07-04 03:05:57 +00:00
ar933x_chip.h
ar933x_uart.h
ar933xreg.h
ar934x_chip.c	sys: Make use of our rounddown() macro when sys/param.h is available.	2016-04-30 14:41:18 +00:00
ar934x_chip.h
ar934x_nfcreg.h
ar934xreg.h
files.ar71xx	Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros.	2015-11-16 04:28:00 +00:00
if_arge.c	[arge] add some extra MDIO debugging support	2016-08-05 17:16:35 +00:00
if_argevar.h	arge: fix barrier macro.	2015-10-30 23:57:20 +00:00
pcf2123_rtc.c
pcf2123reg.h
qca953x_chip.c	sys: Make use of our rounddown() macro when sys/param.h is available.	2016-04-30 14:41:18 +00:00
qca953x_chip.h	Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros.	2015-11-16 04:28:00 +00:00
qca953xreg.h	Add initial support for the QCA953x ("Honeybee") from Qualcomm Atheros.	2015-11-16 04:28:00 +00:00
qca955x_chip.c	sys: Make use of our rounddown() macro when sys/param.h is available.	2016-04-30 14:41:18 +00:00
qca955x_chip.h	Add initial Qualcomm Atheros QCA955x SoC support.	2015-01-05 02:06:26 +00:00
qca955x_pci.c	As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to	2016-02-22 09:02:20 +00:00
qca955xreg.h	Oops - fix typo.	2015-07-03 07:00:24 +00:00
std.ar71xx
uart_bus_ar71xx.c
uart_bus_ar933x.c
uart_cpu_ar71xx.c
uart_cpu_ar933x.c
uart_dev_ar933x.c	Add support for the uart classes to set their default register shift value.	2015-04-11 17:16:23 +00:00
uart_dev_ar933x.h