adrian f90fad94e2 Fix the nfarray offsets for the ar2133/ar5133 radio - (AR5416, AR9160, etc.) ... The offsets didn't match the assumption that nfarray[] is ordered by the chainmask bits and programmed via the register order in ar5416_cca_regs[]. This repairs that damage and ensures that chain 1 is programmed correctly. (And extension channels will now be programmed correctly also.) This fixes some of the stuck beacons I've been seeing on my AR9160/AR5416 setups - because Chain 1 would be programmed -80 or -85 dBm, which is higher than the actual noise floor and thus convincing the radio that indeed it can't ever transmit.		2011-03-13 13:00:45 +00:00
..
ar2133.c	Fix the nfarray offsets for the ar2133/ar5133 radio - (AR5416, AR9160, etc.)	2011-03-13 13:00:45 +00:00
ar5416_ani.c	Add a new parameter to selectively enable/disable the ANI operations.	2011-02-17 05:52:53 +00:00
ar5416_attach.c	Introduce methods for the initial calibration and the new PA calibration	2011-03-11 11:35:36 +00:00
ar5416_beacon.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_cal_adcdc.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_cal_adcgain.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_cal_iq.c	Fix the calibration logic to correctly clamp the calculated coefficient.	2010-08-14 15:28:15 +00:00
ar5416_cal.c	Introduce methods for the initial calibration and the new PA calibration	2011-03-11 11:35:36 +00:00
ar5416_cal.h	Introduce methods for the initial calibration and the new PA calibration	2011-03-11 11:35:36 +00:00
ar5416_eeprom.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_gpio.c	Add support for the AR9285 chipset, which is found on many netbooks	2010-01-29 10:10:14 +00:00
ar5416_interrupts.c	Bring in a couple of fixes from the Linux ath9k related to chip hangs.	2010-06-01 15:33:10 +00:00
ar5416_keycache.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_misc.c	Only enable 11n modes if the chipset suports 11n.	2011-01-20 09:46:18 +00:00
ar5416_phy.c	Modify the AR5416 11na rate table to use 24mb OFDM 11a for control traffic,	2011-02-21 05:10:34 +00:00
ar5416_power.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:02:50 +00:00
ar5416_recv.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_reset.c	Move out some of the shared eeprom board value calculation routines into ah.c	2011-03-13 05:54:05 +00:00
ar5416_xmit.c	Add a temporary workaround so the 11n rate scenario setup code sets a useful	2011-02-05 22:54:37 +00:00
ar5416.h	Move out some of the shared eeprom board value calculation routines into ah.c	2011-03-13 05:54:05 +00:00
ar5416.ini	Bring over ar5416 inivals from Linux-2.6.34.	2010-08-10 07:48:13 +00:00
ar5416desc.h	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416phy.h	Add in some AR9280 specific board configuration options.	2011-02-07 22:00:31 +00:00
ar5416reg.h	* fix the ar5416 check macros to be slightly more correct;	2011-03-03 08:30:28 +00:00