numam-dpdk/drivers/net/ark/ark_ethdev.c

1029 lines
27 KiB
C
Raw Permalink Normal View History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright (c) 2015-2018 Atomic Rules LLC
*/
#include <unistd.h>
#include <sys/stat.h>
#include <dlfcn.h>
#include <bus_pci_driver.h>
#include <ethdev_pci.h>
#include <rte_kvargs.h>
#include "ark_global.h"
#include "ark_logs.h"
#include "ark_ethdev_tx.h"
#include "ark_ethdev_rx.h"
#include "ark_mpu.h"
#include "ark_ddm.h"
#include "ark_udm.h"
#include "ark_rqp.h"
#include "ark_pktdir.h"
#include "ark_pktgen.h"
#include "ark_pktchkr.h"
/* Internal prototypes */
static int eth_ark_check_args(struct ark_adapter *ark, const char *params);
static int eth_ark_dev_init(struct rte_eth_dev *dev);
static int ark_config_device(struct rte_eth_dev *dev);
static int eth_ark_dev_uninit(struct rte_eth_dev *eth_dev);
static int eth_ark_dev_configure(struct rte_eth_dev *dev);
static int eth_ark_dev_start(struct rte_eth_dev *dev);
static int eth_ark_dev_stop(struct rte_eth_dev *dev);
static int eth_ark_dev_close(struct rte_eth_dev *dev);
static int eth_ark_dev_info_get(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info);
static int eth_ark_dev_link_update(struct rte_eth_dev *dev,
int wait_to_complete);
static int eth_ark_dev_set_link_up(struct rte_eth_dev *dev);
static int eth_ark_dev_set_link_down(struct rte_eth_dev *dev);
static int eth_ark_dev_stats_get(struct rte_eth_dev *dev,
struct rte_eth_stats *stats);
static int eth_ark_dev_stats_reset(struct rte_eth_dev *dev);
static int eth_ark_set_default_mac_addr(struct rte_eth_dev *dev,
struct rte_ether_addr *mac_addr);
static int eth_ark_macaddr_add(struct rte_eth_dev *dev,
struct rte_ether_addr *mac_addr,
uint32_t index,
uint32_t pool);
static void eth_ark_macaddr_remove(struct rte_eth_dev *dev,
uint32_t index);
static int eth_ark_set_mtu(struct rte_eth_dev *dev, uint16_t size);
/*
* The packet generator is a functional block used to generate packet
* patterns for testing. It is not intended for nominal use.
*/
#define ARK_PKTGEN_ARG "Pkt_gen"
/*
* The packet checker is a functional block used to verify packet
* patterns for testing. It is not intended for nominal use.
*/
#define ARK_PKTCHKR_ARG "Pkt_chkr"
/*
* The packet director is used to select the internal ingress and
* egress packets paths during testing. It is not intended for
* nominal use.
*/
#define ARK_PKTDIR_ARG "Pkt_dir"
/* Devinfo configurations */
#define ARK_RX_MAX_QUEUE (4096 * 4)
#define ARK_RX_MIN_QUEUE (512)
#define ARK_RX_MAX_PKT_LEN ((16 * 1024) - 128)
#define ARK_RX_MIN_BUFSIZE (1024)
#define ARK_TX_MAX_QUEUE (4096 * 4)
#define ARK_TX_MIN_QUEUE (256)
static const char * const valid_arguments[] = {
ARK_PKTGEN_ARG,
ARK_PKTCHKR_ARG,
ARK_PKTDIR_ARG,
NULL
};
#define AR_VENDOR_ID 0x1d6c
static const struct rte_pci_id pci_id_ark_map[] = {
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100d)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100e)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x100f)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1010)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1017)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1018)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x1019)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101a)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101b)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101c)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101e)},
{RTE_PCI_DEVICE(AR_VENDOR_ID, 0x101f)},
{.vendor_id = 0, /* sentinel */ },
};
/*
* This structure is used to statically define the capabilities
* of supported devices.
* Capabilities:
* rqpacing -
* Some HW variants require that PCIe read-requests be correctly throttled.
* This is called "rqpacing" and has to do with credit and flow control
* on certain Arkville implementations.
*/
struct ark_caps {
bool rqpacing;
bool isvf;
};
struct ark_dev_caps {
uint32_t device_id;
struct ark_caps caps;
};
#define SET_DEV_CAPS(id, rqp, vf) \
{id, {.rqpacing = rqp, .isvf = vf} }
static const struct ark_dev_caps
ark_device_caps[] = {
SET_DEV_CAPS(0x100d, true, false),
SET_DEV_CAPS(0x100e, true, false),
SET_DEV_CAPS(0x100f, true, false),
SET_DEV_CAPS(0x1010, false, false),
SET_DEV_CAPS(0x1017, true, false),
SET_DEV_CAPS(0x1018, true, false),
SET_DEV_CAPS(0x1019, true, false),
SET_DEV_CAPS(0x101a, true, false),
SET_DEV_CAPS(0x101b, true, false),
SET_DEV_CAPS(0x101c, true, true),
SET_DEV_CAPS(0x101e, false, false),
SET_DEV_CAPS(0x101f, false, false),
{.device_id = 0,}
};
static int
eth_ark_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
struct rte_pci_device *pci_dev)
{
struct rte_eth_dev *eth_dev;
int ret;
eth_dev = rte_eth_dev_pci_allocate(pci_dev, sizeof(struct ark_adapter));
if (eth_dev == NULL)
return -ENOMEM;
ret = eth_ark_dev_init(eth_dev);
if (ret)
rte_eth_dev_release_port(eth_dev);
return ret;
}
static int
eth_ark_pci_remove(struct rte_pci_device *pci_dev)
{
return rte_eth_dev_pci_generic_remove(pci_dev, eth_ark_dev_uninit);
}
static struct rte_pci_driver rte_ark_pmd = {
.id_table = pci_id_ark_map,
.drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
.probe = eth_ark_pci_probe,
.remove = eth_ark_pci_remove,
};
static const struct eth_dev_ops ark_eth_dev_ops = {
.dev_configure = eth_ark_dev_configure,
.dev_start = eth_ark_dev_start,
.dev_stop = eth_ark_dev_stop,
.dev_close = eth_ark_dev_close,
.dev_infos_get = eth_ark_dev_info_get,
.rx_queue_setup = eth_ark_dev_rx_queue_setup,
.tx_queue_setup = eth_ark_tx_queue_setup,
.link_update = eth_ark_dev_link_update,
.dev_set_link_up = eth_ark_dev_set_link_up,
.dev_set_link_down = eth_ark_dev_set_link_down,
.rx_queue_start = eth_ark_rx_start_queue,
.rx_queue_stop = eth_ark_rx_stop_queue,
.tx_queue_start = eth_ark_tx_queue_start,
.tx_queue_stop = eth_ark_tx_queue_stop,
.stats_get = eth_ark_dev_stats_get,
.stats_reset = eth_ark_dev_stats_reset,
.mac_addr_add = eth_ark_macaddr_add,
.mac_addr_remove = eth_ark_macaddr_remove,
.mac_addr_set = eth_ark_set_default_mac_addr,
.mtu_set = eth_ark_set_mtu,
};
static int
check_for_ext(struct ark_adapter *ark)
{
int found = 0;
/* Get the env */
const char *dllpath = getenv("ARK_EXT_PATH");
if (dllpath == NULL) {
ARK_PMD_LOG(DEBUG, "EXT NO dll path specified\n");
return 0;
}
ARK_PMD_LOG(NOTICE, "EXT found dll path at %s\n", dllpath);
/* Open and load the .so */
ark->d_handle = dlopen(dllpath, RTLD_LOCAL | RTLD_LAZY);
if (ark->d_handle == NULL) {
ARK_PMD_LOG(ERR, "Could not load user extension %s\n",
dllpath);
return -1;
}
ARK_PMD_LOG(DEBUG, "SUCCESS: loaded user extension %s\n",
dllpath);
/* Get the entry points */
ark->user_ext.dev_init =
(void *(*)(struct rte_eth_dev *, void *, int))
dlsym(ark->d_handle, "rte_pmd_ark_dev_init");
ARK_PMD_LOG(DEBUG, "device ext init pointer = %p\n",
ark->user_ext.dev_init);
ark->user_ext.dev_get_port_count =
(int (*)(struct rte_eth_dev *, void *))
dlsym(ark->d_handle, "rte_pmd_ark_dev_get_port_count");
ark->user_ext.dev_uninit =
(void (*)(struct rte_eth_dev *, void *))
dlsym(ark->d_handle, "rte_pmd_ark_dev_uninit");
ark->user_ext.dev_configure =
(int (*)(struct rte_eth_dev *, void *))
dlsym(ark->d_handle, "rte_pmd_ark_dev_configure");
ark->user_ext.dev_start =
(int (*)(struct rte_eth_dev *, void *))
dlsym(ark->d_handle, "rte_pmd_ark_dev_start");
ark->user_ext.dev_stop =
(void (*)(struct rte_eth_dev *, void *))
dlsym(ark->d_handle, "rte_pmd_ark_dev_stop");
ark->user_ext.dev_close =
(void (*)(struct rte_eth_dev *, void *))
dlsym(ark->d_handle, "rte_pmd_ark_dev_close");
ark->user_ext.link_update =
(int (*)(struct rte_eth_dev *, int, void *))
dlsym(ark->d_handle, "rte_pmd_ark_link_update");
ark->user_ext.dev_set_link_up =
(int (*)(struct rte_eth_dev *, void *))
dlsym(ark->d_handle, "rte_pmd_ark_dev_set_link_up");
ark->user_ext.dev_set_link_down =
(int (*)(struct rte_eth_dev *, void *))
dlsym(ark->d_handle, "rte_pmd_ark_dev_set_link_down");
ark->user_ext.stats_get =
(int (*)(struct rte_eth_dev *, struct rte_eth_stats *,
void *))
dlsym(ark->d_handle, "rte_pmd_ark_stats_get");
ark->user_ext.stats_reset =
(void (*)(struct rte_eth_dev *, void *))
dlsym(ark->d_handle, "rte_pmd_ark_stats_reset");
ark->user_ext.mac_addr_add =
(void (*)(struct rte_eth_dev *, struct rte_ether_addr *,
uint32_t, uint32_t, void *))
dlsym(ark->d_handle, "rte_pmd_ark_mac_addr_add");
ark->user_ext.mac_addr_remove =
(void (*)(struct rte_eth_dev *, uint32_t, void *))
dlsym(ark->d_handle, "rte_pmd_ark_mac_addr_remove");
ark->user_ext.mac_addr_set =
(void (*)(struct rte_eth_dev *, struct rte_ether_addr *,
void *))
dlsym(ark->d_handle, "rte_pmd_ark_mac_addr_set");
ark->user_ext.set_mtu =
(int (*)(struct rte_eth_dev *, uint16_t,
void *))
dlsym(ark->d_handle, "rte_pmd_ark_set_mtu");
ark->user_ext.rx_user_meta_hook =
(rx_user_meta_hook_fn)dlsym(ark->d_handle,
"rte_pmd_ark_rx_user_meta_hook");
ark->user_ext.tx_user_meta_hook =
(tx_user_meta_hook_fn)dlsym(ark->d_handle,
"rte_pmd_ark_tx_user_meta_hook");
return found;
}
static int
eth_ark_dev_init(struct rte_eth_dev *dev)
{
struct ark_adapter *ark = dev->data->dev_private;
struct rte_pci_device *pci_dev;
int ret;
int port_count = 1;
int p;
bool rqpacing = false;
ark->eth_dev = dev;
ARK_PMD_LOG(DEBUG, "\n");
/* Check to see if there is an extension that we need to load */
ret = check_for_ext(ark);
if (ret)
return ret;
pci_dev = RTE_ETH_DEV_TO_PCI(dev);
rte_eth_copy_pci_info(dev, pci_dev);
dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
p = 0;
while (ark_device_caps[p].device_id != 0) {
if (pci_dev->id.device_id == ark_device_caps[p].device_id) {
rqpacing = ark_device_caps[p].caps.rqpacing;
ark->isvf = ark_device_caps[p].caps.isvf;
break;
}
p++;
}
/* Use dummy function until setup */
dev->rx_pkt_burst = rte_eth_pkt_burst_dummy;
dev->tx_pkt_burst = rte_eth_pkt_burst_dummy;
ark->bar0 = (uint8_t *)pci_dev->mem_resource[0].addr;
ark->a_bar = (uint8_t *)pci_dev->mem_resource[2].addr;
ark->sysctrl.v = (void *)&ark->bar0[ARK_SYSCTRL_BASE];
ark->mpurx.v = (void *)&ark->bar0[ARK_MPU_RX_BASE];
ark->udm.v = (void *)&ark->bar0[ARK_UDM_BASE];
ark->mputx.v = (void *)&ark->bar0[ARK_MPU_TX_BASE];
ark->ddm.v = (void *)&ark->bar0[ARK_DDM_BASE];
ark->cmac.v = (void *)&ark->bar0[ARK_CMAC_BASE];
ark->external.v = (void *)&ark->bar0[ARK_EXTERNAL_BASE];
ark->pktdir.v = (void *)&ark->bar0[ARK_PKTDIR_BASE];
ark->pktgen.v = (void *)&ark->bar0[ARK_PKTGEN_BASE];
ark->pktchkr.v = (void *)&ark->bar0[ARK_PKTCHKR_BASE];
if (rqpacing) {
ark->rqpacing =
(struct ark_rqpace_t *)(ark->bar0 + ARK_RCPACING_BASE);
} else {
ark->rqpacing = NULL;
}
ark->started = 0;
ark->pkt_dir_v = ARK_PKT_DIR_INIT_VAL;
ARK_PMD_LOG(INFO, "Sys Ctrl Const = 0x%x HW Commit_ID: %08x\n",
ark->sysctrl.t32[4],
rte_be_to_cpu_32(ark->sysctrl.t32[0x20 / 4]));
ARK_PMD_LOG(NOTICE, "Arkville HW Commit_ID: %08x\n",
rte_be_to_cpu_32(ark->sysctrl.t32[0x20 / 4]));
/* If HW sanity test fails, return an error */
if (ark->sysctrl.t32[4] != 0xcafef00d) {
ARK_PMD_LOG(ERR,
"HW Sanity test has failed, expected constant"
" 0x%x, read 0x%x (%s)\n",
0xcafef00d,
ark->sysctrl.t32[4], __func__);
return -1;
}
if (ark->sysctrl.t32[3] != 0) {
if (ark->rqpacing) {
if (ark_rqp_lasped(ark->rqpacing)) {
ARK_PMD_LOG(ERR, "Arkville Evaluation System - "
"Timer has Expired\n");
return -1;
}
ARK_PMD_LOG(WARNING, "Arkville Evaluation System - "
"Timer is Running\n");
}
}
ARK_PMD_LOG(DEBUG,
"HW Sanity test has PASSED, expected constant"
" 0x%x, read 0x%x (%s)\n",
0xcafef00d, ark->sysctrl.t32[4], __func__);
/* We are a single function multi-port device. */
ret = ark_config_device(dev);
if (ret)
return -1;
dev->dev_ops = &ark_eth_dev_ops;
dev->rx_queue_count = eth_ark_dev_rx_queue_count;
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
dev->data->mac_addrs = rte_zmalloc("ark", RTE_ETHER_ADDR_LEN, 0);
if (!dev->data->mac_addrs) {
ARK_PMD_LOG(ERR,
"Failed to allocated memory for storing mac address"
);
}
if (ark->user_ext.dev_init) {
ark->user_data[dev->data->port_id] =
ark->user_ext.dev_init(dev, ark->a_bar, 0);
if (!ark->user_data[dev->data->port_id]) {
ARK_PMD_LOG(WARNING,
"Failed to initialize PMD extension!"
" continuing without it\n");
memset(&ark->user_ext, 0, sizeof(struct ark_user_ext));
dlclose(ark->d_handle);
}
}
if (pci_dev->device.devargs)
ret = eth_ark_check_args(ark, pci_dev->device.devargs->args);
else
ARK_PMD_LOG(INFO, "No Device args found\n");
if (ret)
goto error;
/*
* We will create additional devices based on the number of requested
* ports
*/
if (ark->user_ext.dev_get_port_count)
port_count =
ark->user_ext.dev_get_port_count(dev,
ark->user_data[dev->data->port_id]);
ark->num_ports = port_count;
for (p = 0; p < port_count; p++) {
struct rte_eth_dev *eth_dev;
char name[RTE_ETH_NAME_MAX_LEN];
snprintf(name, sizeof(name), "arketh%d",
dev->data->port_id + p);
if (p == 0) {
/* First port is already allocated by DPDK */
eth_dev = ark->eth_dev;
rte_eth_dev_probing_finish(eth_dev);
continue;
}
/* reserve an ethdev entry */
eth_dev = rte_eth_dev_allocate(name);
if (!eth_dev) {
ARK_PMD_LOG(ERR,
"Could not allocate eth_dev for port %d\n",
p);
goto error;
}
eth_dev->device = &pci_dev->device;
eth_dev->data->dev_private = ark;
eth_dev->dev_ops = ark->eth_dev->dev_ops;
eth_dev->tx_pkt_burst = ark->eth_dev->tx_pkt_burst;
eth_dev->rx_pkt_burst = ark->eth_dev->rx_pkt_burst;
rte_eth_copy_pci_info(eth_dev, pci_dev);
eth_dev->data->dev_flags |= RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS;
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
eth_dev->data->mac_addrs = rte_zmalloc(name,
RTE_ETHER_ADDR_LEN, 0);
if (!eth_dev->data->mac_addrs) {
ARK_PMD_LOG(ERR,
"Memory allocation for MAC failed!"
" Exiting.\n");
goto error;
}
if (ark->user_ext.dev_init) {
ark->user_data[eth_dev->data->port_id] =
ark->user_ext.dev_init(dev, ark->a_bar, p);
}
rte_eth_dev_probing_finish(eth_dev);
}
return ret;
error:
rte_free(dev->data->mac_addrs);
dev->data->mac_addrs = NULL;
return -1;
}
/*
*Initial device configuration when device is opened
* setup the DDM, and UDM
* Called once per PCIE device
*/
static int
ark_config_device(struct rte_eth_dev *dev)
{
struct ark_adapter *ark = dev->data->dev_private;
uint16_t num_q, i;
struct ark_mpu_t *mpu;
/*
* Make sure that the packet director, generator and checker are in a
* known state
*/
if (!ark->isvf) {
ark->start_pg = 0;
ark->pg_running = 0;
ark->pg = ark_pktgen_init(ark->pktgen.v, 0, 1);
if (ark->pg == NULL)
return -1;
ark_pktgen_reset(ark->pg);
ark->pc = ark_pktchkr_init(ark->pktchkr.v, 0, 1);
if (ark->pc == NULL)
return -1;
ark_pktchkr_stop(ark->pc);
ark->pd = ark_pktdir_init(ark->pktdir.v);
if (ark->pd == NULL)
return -1;
}
/* Verify HW */
if (ark_udm_verify(ark->udm.v))
return -1;
if (ark_ddm_verify(ark->ddm.v))
return -1;
/* MPU reset */
mpu = ark->mpurx.v;
num_q = ark_api_num_queues(mpu);
ark->rx_queues = num_q;
for (i = 0; i < num_q; i++) {
mpu = RTE_PTR_ADD(mpu, ARK_MPU_QOFFSET);
}
mpu = ark->mputx.v;
num_q = ark_api_num_queues(mpu);
ark->tx_queues = num_q;
for (i = 0; i < num_q; i++) {
mpu = RTE_PTR_ADD(mpu, ARK_MPU_QOFFSET);
}
if (!ark->isvf && ark->rqpacing)
ark_rqp_stats_reset(ark->rqpacing);
return 0;
}
static int
eth_ark_dev_uninit(struct rte_eth_dev *dev)
{
struct ark_adapter *ark = dev->data->dev_private;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
if (ark->user_ext.dev_uninit)
ark->user_ext.dev_uninit(dev,
ark->user_data[dev->data->port_id]);
if (!ark->isvf) {
ark_pktgen_uninit(ark->pg);
ark_pktchkr_uninit(ark->pc);
}
return 0;
}
static int
eth_ark_dev_configure(struct rte_eth_dev *dev)
{
struct ark_adapter *ark = dev->data->dev_private;
eth_ark_dev_set_link_up(dev);
if (ark->user_ext.dev_configure)
return ark->user_ext.dev_configure(dev,
ark->user_data[dev->data->port_id]);
return 0;
}
static int
eth_ark_dev_start(struct rte_eth_dev *dev)
{
struct ark_adapter *ark = dev->data->dev_private;
int i;
/* RX Side */
for (i = 0; i < dev->data->nb_rx_queues; i++)
eth_ark_rx_start_queue(dev, i);
/* TX Side */
for (i = 0; i < dev->data->nb_tx_queues; i++)
eth_ark_tx_queue_start(dev, i);
ark->started = 1;
/* set xmit and receive function */
dev->rx_pkt_burst = &eth_ark_recv_pkts;
dev->tx_pkt_burst = &eth_ark_xmit_pkts;
if (!ark->isvf && ark->start_pg)
ark_pktchkr_run(ark->pc);
if (!ark->isvf && ark->start_pg && !ark->pg_running) {
pthread_t thread;
/* Delay packet generatpr start allow the hardware to be ready
* This is only used for sanity checking with internal generator
*/
char tname[32];
snprintf(tname, sizeof(tname), "ark-delay-pg-%d",
dev->data->port_id);
if (rte_ctrl_thread_create(&thread, tname, NULL,
ark_pktgen_delay_start, ark->pg)) {
ARK_PMD_LOG(ERR, "Could not create pktgen "
"starter thread\n");
return -1;
}
ark->pg_running = 1;
}
if (ark->user_ext.dev_start)
ark->user_ext.dev_start(dev,
ark->user_data[dev->data->port_id]);
return 0;
}
static int
eth_ark_dev_stop(struct rte_eth_dev *dev)
{
uint16_t i;
int status;
struct ark_adapter *ark = dev->data->dev_private;
if (ark->started == 0)
return 0;
ark->started = 0;
dev->data->dev_started = 0;
/* Stop the extension first */
if (ark->user_ext.dev_stop)
ark->user_ext.dev_stop(dev,
ark->user_data[dev->data->port_id]);
/* Stop the packet generator */
if (!ark->isvf && ark->start_pg && ark->pg_running) {
ark_pktgen_pause(ark->pg);
ark->pg_running = 0;
}
dev->rx_pkt_burst = rte_eth_pkt_burst_dummy;
dev->tx_pkt_burst = rte_eth_pkt_burst_dummy;
/* Stop RX Side */
for (i = 0; i < dev->data->nb_rx_queues; i++)
eth_ark_rx_stop_queue(dev, i);
/* STOP TX Side */
for (i = 0; i < dev->data->nb_tx_queues; i++) {
status = eth_ark_tx_queue_stop(dev, i);
if (status != 0) {
uint16_t port = dev->data->port_id;
ARK_PMD_LOG(ERR,
"tx_queue stop anomaly"
" port %u, queue %u\n",
port, i);
}
}
ark_udm_dump_stats(ark->udm.v, "Post stop");
for (i = 0; i < dev->data->nb_rx_queues; i++)
eth_ark_rx_dump_queue(dev, i, __func__);
/* Stop the packet checker if it is running */
if (!ark->isvf && ark->start_pg) {
ark_pktchkr_dump_stats(ark->pc);
ark_pktchkr_stop(ark->pc);
}
return 0;
}
static int
eth_ark_dev_close(struct rte_eth_dev *dev)
{
struct ark_adapter *ark = dev->data->dev_private;
uint16_t i;
if (rte_eal_process_type() != RTE_PROC_PRIMARY)
return 0;
if (ark->user_ext.dev_close)
ark->user_ext.dev_close(dev,
ark->user_data[dev->data->port_id]);
eth_ark_dev_stop(dev);
/*
* This should only be called once for the device during shutdown
*/
if (ark->rqpacing)
ark_rqp_dump(ark->rqpacing);
/* return to power-on state */
if (ark->pd)
ark_pktdir_setup(ark->pd, ARK_PKT_DIR_INIT_VAL);
for (i = 0; i < dev->data->nb_tx_queues; i++) {
eth_ark_tx_queue_release(dev->data->tx_queues[i]);
dev->data->tx_queues[i] = 0;
}
for (i = 0; i < dev->data->nb_rx_queues; i++) {
eth_ark_dev_rx_queue_release(dev->data->rx_queues[i]);
dev->data->rx_queues[i] = 0;
}
return 0;
}
static int
eth_ark_dev_info_get(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info)
{
struct ark_adapter *ark = dev->data->dev_private;
struct ark_mpu_t *tx_mpu = RTE_PTR_ADD(ark->bar0, ARK_MPU_TX_BASE);
struct ark_mpu_t *rx_mpu = RTE_PTR_ADD(ark->bar0, ARK_MPU_RX_BASE);
uint16_t ports = ark->num_ports;
dev_info->max_rx_pktlen = ARK_RX_MAX_PKT_LEN;
dev_info->min_rx_bufsize = ARK_RX_MIN_BUFSIZE;
dev_info->max_rx_queues = ark_api_num_queues_per_port(rx_mpu, ports);
dev_info->max_tx_queues = ark_api_num_queues_per_port(tx_mpu, ports);
dev_info->rx_desc_lim = (struct rte_eth_desc_lim) {
.nb_max = ARK_RX_MAX_QUEUE,
.nb_min = ARK_RX_MIN_QUEUE,
.nb_align = ARK_RX_MIN_QUEUE}; /* power of 2 */
dev_info->tx_desc_lim = (struct rte_eth_desc_lim) {
.nb_max = ARK_TX_MAX_QUEUE,
.nb_min = ARK_TX_MIN_QUEUE,
.nb_align = ARK_TX_MIN_QUEUE}; /* power of 2 */
/* ARK PMD supports all line rates, how do we indicate that here ?? */
dev_info->speed_capa = (RTE_ETH_LINK_SPEED_1G |
RTE_ETH_LINK_SPEED_10G |
RTE_ETH_LINK_SPEED_25G |
RTE_ETH_LINK_SPEED_40G |
RTE_ETH_LINK_SPEED_50G |
RTE_ETH_LINK_SPEED_100G);
dev_info->rx_offload_capa = RTE_ETH_RX_OFFLOAD_TIMESTAMP;
return 0;
}
static int
eth_ark_dev_link_update(struct rte_eth_dev *dev, int wait_to_complete)
{
ARK_PMD_LOG(DEBUG, "link status = %d\n",
dev->data->dev_link.link_status);
struct ark_adapter *ark = dev->data->dev_private;
if (ark->user_ext.link_update) {
return ark->user_ext.link_update
(dev, wait_to_complete,
ark->user_data[dev->data->port_id]);
}
return 0;
}
static int
eth_ark_dev_set_link_up(struct rte_eth_dev *dev)
{
dev->data->dev_link.link_status = 1;
struct ark_adapter *ark = dev->data->dev_private;
if (ark->user_ext.dev_set_link_up)
return ark->user_ext.dev_set_link_up(dev,
ark->user_data[dev->data->port_id]);
return 0;
}
static int
eth_ark_dev_set_link_down(struct rte_eth_dev *dev)
{
dev->data->dev_link.link_status = 0;
struct ark_adapter *ark = dev->data->dev_private;
if (ark->user_ext.dev_set_link_down)
return ark->user_ext.dev_set_link_down(dev,
ark->user_data[dev->data->port_id]);
return 0;
}
static int
eth_ark_dev_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
{
uint16_t i;
struct ark_adapter *ark = dev->data->dev_private;
stats->ipackets = 0;
stats->ibytes = 0;
stats->opackets = 0;
stats->obytes = 0;
stats->imissed = 0;
stats->oerrors = 0;
for (i = 0; i < dev->data->nb_tx_queues; i++)
eth_tx_queue_stats_get(dev->data->tx_queues[i], stats);
for (i = 0; i < dev->data->nb_rx_queues; i++)
eth_rx_queue_stats_get(dev->data->rx_queues[i], stats);
if (ark->user_ext.stats_get)
return ark->user_ext.stats_get(dev, stats,
ark->user_data[dev->data->port_id]);
return 0;
}
static int
eth_ark_dev_stats_reset(struct rte_eth_dev *dev)
{
uint16_t i;
struct ark_adapter *ark = dev->data->dev_private;
for (i = 0; i < dev->data->nb_tx_queues; i++)
eth_tx_queue_stats_reset(dev->data->tx_queues[i]);
for (i = 0; i < dev->data->nb_rx_queues; i++)
eth_rx_queue_stats_reset(dev->data->rx_queues[i]);
if (ark->user_ext.stats_reset)
ark->user_ext.stats_reset(dev,
ark->user_data[dev->data->port_id]);
return 0;
}
static int
eth_ark_macaddr_add(struct rte_eth_dev *dev,
struct rte_ether_addr *mac_addr,
uint32_t index,
uint32_t pool)
{
struct ark_adapter *ark = dev->data->dev_private;
if (ark->user_ext.mac_addr_add) {
ark->user_ext.mac_addr_add(dev,
mac_addr,
index,
pool,
ark->user_data[dev->data->port_id]);
return 0;
}
return -ENOTSUP;
}
static void
eth_ark_macaddr_remove(struct rte_eth_dev *dev, uint32_t index)
{
struct ark_adapter *ark = dev->data->dev_private;
if (ark->user_ext.mac_addr_remove)
ark->user_ext.mac_addr_remove(dev, index,
ark->user_data[dev->data->port_id]);
}
static int
eth_ark_set_default_mac_addr(struct rte_eth_dev *dev,
struct rte_ether_addr *mac_addr)
{
struct ark_adapter *ark = dev->data->dev_private;
if (ark->user_ext.mac_addr_set) {
ark->user_ext.mac_addr_set(dev, mac_addr,
ark->user_data[dev->data->port_id]);
return 0;
}
return -ENOTSUP;
}
static int
eth_ark_set_mtu(struct rte_eth_dev *dev, uint16_t size)
{
struct ark_adapter *ark = dev->data->dev_private;
if (ark->user_ext.set_mtu)
return ark->user_ext.set_mtu(dev, size,
ark->user_data[dev->data->port_id]);
return -ENOTSUP;
}
static inline int
process_pktdir_arg(const char *key, const char *value,
void *extra_args)
{
ARK_PMD_LOG(DEBUG, "key = %s, value = %s\n",
key, value);
struct ark_adapter *ark =
(struct ark_adapter *)extra_args;
ark->pkt_dir_v = strtol(value, NULL, 16);
ARK_PMD_LOG(DEBUG, "pkt_dir_v = 0x%x\n", ark->pkt_dir_v);
return 0;
}
static inline int
process_file_args(const char *key, const char *value, void *extra_args)
{
ARK_PMD_LOG(DEBUG, "key = %s, value = %s\n",
key, value);
char *args = (char *)extra_args;
/* Open the configuration file */
FILE *file = fopen(value, "r");
char line[ARK_MAX_ARG_LEN];
int size = 0;
int first = 1;
if (file == NULL) {
ARK_PMD_LOG(ERR, "Unable to open "
"config file %s\n", value);
return -1;
}
while (fgets(line, sizeof(line), file)) {
size += strlen(line);
if (size >= ARK_MAX_ARG_LEN) {
ARK_PMD_LOG(ERR, "Unable to parse file %s args, "
"parameter list is too long\n", value);
fclose(file);
return -1;
}
if (first) {
strncpy(args, line, ARK_MAX_ARG_LEN);
first = 0;
} else {
strncat(args, line, ARK_MAX_ARG_LEN);
}
}
ARK_PMD_LOG(DEBUG, "file = %s\n", args);
fclose(file);
return 0;
}
static int
eth_ark_check_args(struct ark_adapter *ark, const char *params)
{
struct rte_kvargs *kvlist;
unsigned int k_idx;
struct rte_kvargs_pair *pair = NULL;
int ret = -1;
kvlist = rte_kvargs_parse(params, valid_arguments);
if (kvlist == NULL)
return 0;
ark->pkt_gen_args[0] = 0;
ark->pkt_chkr_args[0] = 0;
for (k_idx = 0; k_idx < kvlist->count; k_idx++) {
pair = &kvlist->pairs[k_idx];
ARK_PMD_LOG(DEBUG, "**** Arg passed to PMD = %s:%s\n",
pair->key,
pair->value);
}
if (rte_kvargs_process(kvlist,
ARK_PKTDIR_ARG,
&process_pktdir_arg,
ark) != 0) {
ARK_PMD_LOG(ERR, "Unable to parse arg %s\n", ARK_PKTDIR_ARG);
goto free_kvlist;
}
if (rte_kvargs_process(kvlist,
ARK_PKTGEN_ARG,
&process_file_args,
ark->pkt_gen_args) != 0) {
ARK_PMD_LOG(ERR, "Unable to parse arg %s\n", ARK_PKTGEN_ARG);
goto free_kvlist;
}
if (rte_kvargs_process(kvlist,
ARK_PKTCHKR_ARG,
&process_file_args,
ark->pkt_chkr_args) != 0) {
ARK_PMD_LOG(ERR, "Unable to parse arg %s\n", ARK_PKTCHKR_ARG);
goto free_kvlist;
}
if (ark->isvf) {
ret = 0;
goto free_kvlist;
}
ARK_PMD_LOG(INFO, "packet director set to 0x%x\n", ark->pkt_dir_v);
/* Setup the packet director */
ark_pktdir_setup(ark->pd, ark->pkt_dir_v);
/* Setup the packet generator */
if (ark->pkt_gen_args[0]) {
ARK_PMD_LOG(DEBUG, "Setting up the packet generator\n");
ark_pktgen_parse(ark->pkt_gen_args);
ark_pktgen_reset(ark->pg);
ark_pktgen_setup(ark->pg);
ark->start_pg = 1;
}
/* Setup the packet checker */
if (ark->pkt_chkr_args[0]) {
ark_pktchkr_parse(ark->pkt_chkr_args);
ark_pktchkr_setup(ark->pc);
}
ret = 0;
free_kvlist:
rte_kvargs_free(kvlist);
return ret;
}
RTE_PMD_REGISTER_PCI(net_ark, rte_ark_pmd);
RTE_PMD_REGISTER_KMOD_DEP(net_ark, "* igb_uio | uio_pci_generic ");
RTE_PMD_REGISTER_PCI_TABLE(net_ark, pci_id_ark_map);
RTE_PMD_REGISTER_PARAM_STRING(net_ark,
ARK_PKTGEN_ARG "=<filename> "
ARK_PKTCHKR_ARG "=<filename> "
ARK_PKTDIR_ARG "=<bitmap>");
log: register with standardized names Let's try to enforce the convention where most drivers use a pmd. logtype with their class reflected in it, and libraries use a lib. logtype. Introduce two new macros: - RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is used in a component. It is associated to the default name provided by the build system, - RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used, and then the passed name is appended to the default name, RTE_LOG_REGISTER is left untouched for existing external users and for components that do not comply with the convention. There is a new Meson variable log_prefix to adapt the default name for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes. Note: achieved with below commands + reverted change on net/bonding + edits on crypto/virtio, compress/mlx5, regex/mlx5 $ git grep -l RTE_LOG_REGISTER drivers/ | while read file; do pattern=${file##drivers/}; class=${pattern%%/*}; pattern=${pattern#$class/}; drv=${pattern%%/*}; case "$class" in baseband) pattern=pmd.bb.$drv;; bus) pattern=bus.$drv;; mempool) pattern=mempool.$drv;; *) pattern=pmd.$class.$drv;; esac sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file; sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file; done $ git grep -l RTE_LOG_REGISTER lib/ | while read file; do pattern=${file##lib/}; pattern=lib.${pattern%%/*}; sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file; sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file; done Signed-off-by: David Marchand <david.marchand@redhat.com> Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
2021-04-26 12:51:08 +00:00
RTE_LOG_REGISTER_DEFAULT(ark_logtype, NOTICE);