numam-dpdk/app/test-pmd/testpmd.c

2806 lines
70 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2010-2017 Intel Corporation
*/
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <signal.h>
#include <string.h>
#include <time.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <errno.h>
#include <stdbool.h>
#include <sys/queue.h>
#include <sys/stat.h>
#include <stdint.h>
#include <unistd.h>
#include <inttypes.h>
#include <rte_common.h>
#include <rte_errno.h>
#include <rte_byteorder.h>
#include <rte_log.h>
#include <rte_debug.h>
#include <rte_cycles.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
#include <rte_launch.h>
#include <rte_eal.h>
#include <rte_alarm.h>
#include <rte_per_lcore.h>
#include <rte_lcore.h>
#include <rte_atomic.h>
#include <rte_branch_prediction.h>
#include <rte_mempool.h>
#include <rte_malloc.h>
#include <rte_mbuf.h>
#include <rte_mbuf_pool_ops.h>
#include <rte_interrupts.h>
#include <rte_pci.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_dev.h>
#include <rte_string_fns.h>
#ifdef RTE_LIBRTE_IXGBE_PMD
#include <rte_pmd_ixgbe.h>
#endif
#ifdef RTE_LIBRTE_PDUMP
#include <rte_pdump.h>
#endif
#include <rte_flow.h>
#include <rte_metrics.h>
#ifdef RTE_LIBRTE_BITRATE
#include <rte_bitrate.h>
#endif
#ifdef RTE_LIBRTE_LATENCY_STATS
#include <rte_latencystats.h>
#endif
#include "testpmd.h"
uint16_t verbose_level = 0; /**< Silent by default. */
int testpmd_logtype; /**< Log type for testpmd logs */
/* use master core for command line ? */
uint8_t interactive = 0;
uint8_t auto_start = 0;
uint8_t tx_first;
char cmdline_filename[PATH_MAX] = {0};
/*
* NUMA support configuration.
* When set, the NUMA support attempts to dispatch the allocation of the
* RX and TX memory rings, and of the DMA memory buffers (mbufs) for the
* probed ports among the CPU sockets 0 and 1.
* Otherwise, all memory is allocated from CPU socket 0.
*/
uint8_t numa_support = 1; /**< numa enabled by default */
/*
* In UMA mode,all memory is allocated from socket 0 if --socket-num is
* not configured.
*/
uint8_t socket_num = UMA_NO_CONFIG;
/*
* Use ANONYMOUS mapped memory (might be not physically continuous) for mbufs.
*/
uint8_t mp_anon = 0;
/*
* Store specified sockets on which memory pool to be used by ports
* is allocated.
*/
uint8_t port_numa[RTE_MAX_ETHPORTS];
/*
* Store specified sockets on which RX ring to be used by ports
* is allocated.
*/
uint8_t rxring_numa[RTE_MAX_ETHPORTS];
/*
* Store specified sockets on which TX ring to be used by ports
* is allocated.
*/
uint8_t txring_numa[RTE_MAX_ETHPORTS];
/*
* Record the Ethernet address of peer target ports to which packets are
* forwarded.
* Must be instantiated with the ethernet addresses of peer traffic generator
* ports.
*/
struct ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
portid_t nb_peer_eth_addrs = 0;
/*
* Probed Target Environment.
*/
struct rte_port *ports; /**< For all probed ethernet ports. */
portid_t nb_ports; /**< Number of probed ethernet ports. */
struct fwd_lcore **fwd_lcores; /**< For all probed logical cores. */
lcoreid_t nb_lcores; /**< Number of probed logical cores. */
/*
* Test Forwarding Configuration.
* nb_fwd_lcores <= nb_cfg_lcores <= nb_lcores
* nb_fwd_ports <= nb_cfg_ports <= nb_ports
*/
lcoreid_t nb_cfg_lcores; /**< Number of configured logical cores. */
lcoreid_t nb_fwd_lcores; /**< Number of forwarding logical cores. */
portid_t nb_cfg_ports; /**< Number of configured ports. */
portid_t nb_fwd_ports; /**< Number of forwarding ports. */
unsigned int fwd_lcores_cpuids[RTE_MAX_LCORE]; /**< CPU ids configuration. */
portid_t fwd_ports_ids[RTE_MAX_ETHPORTS]; /**< Port ids configuration. */
struct fwd_stream **fwd_streams; /**< For each RX queue of each port. */
streamid_t nb_fwd_streams; /**< Is equal to (nb_ports * nb_rxq). */
/*
* Forwarding engines.
*/
struct fwd_engine * fwd_engines[] = {
&io_fwd_engine,
&mac_fwd_engine,
&mac_swap_engine,
&flow_gen_engine,
&rx_only_engine,
&tx_only_engine,
&csum_fwd_engine,
app/testpmd: add engine that replies to ARP and ICMP echo requests Add a new specific packet processing engine in the "testpmd" application that only replies to ARP requests and to ICMP echo requests. For this purpose, a new "icmpecho" forwarding mode is provided that can be dynamically selected with the following testpmd command: set fwd icmpecho before starting the receipt of packets on the selected ports. Then, the "icmpecho" engine performs the following actions on all received packets: - replies to a received ARP request by sending back on the RX port a ARP reply with a "sender hardware address" field containing the MAC address of the RX port, - replies to a ICMP echo request by sending back on the RX port a ICMP echo reply, swapping the IP source and the IP destination address in the IP header, - otherwise, simply drops the received packet. When replying to a received packet that was encapsulated into a VLAN tunnel, the reply is sent back with the same VLAN identifier. By default, the testpmd configures VLAN header stripping RX option on each port. This option is not managed by the icmpecho engine which won't detect packets that were encapsulated into a VLAN. To address this issue, the VLAN header stripping option must be previously switched off with the following testpmd command: vlan set strip off When the "verbose" mode has been set with the testpmd command "set verbose 1", the "icmpecho" engine displays informations about each received packet. The "icmpecho" forwarding engine can also be used to simply check port connectivity at the hardware level (check that cables are well-plugged) and at the software level (receipt of VLAN packets, for instance). Signed-off-by: Ivan Boule <ivan.boule@6wind.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
2014-04-30 13:30:11 +00:00
&icmp_echo_engine,
#if defined RTE_LIBRTE_PMD_SOFTNIC && defined RTE_LIBRTE_SCHED
&softnic_tm_engine,
&softnic_tm_bypass_engine,
#endif
#ifdef RTE_LIBRTE_IEEE1588
&ieee1588_fwd_engine,
#endif
NULL,
};
struct fwd_config cur_fwd_config;
struct fwd_engine *cur_fwd_eng = &io_fwd_engine; /**< IO mode by default. */
uint32_t retry_enabled;
uint32_t burst_tx_delay_time = BURST_TX_WAIT_US;
uint32_t burst_tx_retry_num = BURST_TX_RETRIES;
uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */
uint32_t param_total_num_mbufs = 0; /**< number of mbufs in all pools - if
* specified on command-line. */
uint16_t stats_period; /**< Period to show statistics (disabled by default) */
/*
* In container, it cannot terminate the process which running with 'stats-period'
* option. Set flag to exit stats period loop after received SIGINT/SIGTERM.
*/
uint8_t f_quit;
/*
* Configuration of packet segments used by the "txonly" processing engine.
*/
uint16_t tx_pkt_length = TXONLY_DEF_PACKET_LEN; /**< TXONLY packet length. */
uint16_t tx_pkt_seg_lengths[RTE_MAX_SEGS_PER_PKT] = {
TXONLY_DEF_PACKET_LEN,
};
uint8_t tx_pkt_nb_segs = 1; /**< Number of segments in TXONLY packets */
enum tx_pkt_split tx_pkt_split = TX_PKT_SPLIT_OFF;
/**< Split policy for packets to TX. */
uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */
uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */
/* current configuration is in DCB or not,0 means it is not in DCB mode */
uint8_t dcb_config = 0;
/* Whether the dcb is in testing status */
uint8_t dcb_test = 0;
/*
* Configurable number of RX/TX queues.
*/
queueid_t nb_rxq = 1; /**< Number of RX queues per port. */
queueid_t nb_txq = 1; /**< Number of TX queues per port. */
/*
* Configurable number of RX/TX ring descriptors.
* Defaults are supplied by drivers via ethdev.
*/
#define RTE_TEST_RX_DESC_DEFAULT 0
#define RTE_TEST_TX_DESC_DEFAULT 0
uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; /**< Number of RX descriptors. */
uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Number of TX descriptors. */
#define RTE_PMD_PARAM_UNSET -1
/*
* Configurable values of RX and TX ring threshold registers.
*/
int8_t rx_pthresh = RTE_PMD_PARAM_UNSET;
int8_t rx_hthresh = RTE_PMD_PARAM_UNSET;
int8_t rx_wthresh = RTE_PMD_PARAM_UNSET;
int8_t tx_pthresh = RTE_PMD_PARAM_UNSET;
int8_t tx_hthresh = RTE_PMD_PARAM_UNSET;
int8_t tx_wthresh = RTE_PMD_PARAM_UNSET;
/*
* Configurable value of RX free threshold.
*/
int16_t rx_free_thresh = RTE_PMD_PARAM_UNSET;
/*
* Configurable value of RX drop enable.
*/
int8_t rx_drop_en = RTE_PMD_PARAM_UNSET;
/*
* Configurable value of TX free threshold.
*/
int16_t tx_free_thresh = RTE_PMD_PARAM_UNSET;
/*
* Configurable value of TX RS bit threshold.
*/
int16_t tx_rs_thresh = RTE_PMD_PARAM_UNSET;
/*
* Receive Side Scaling (RSS) configuration.
*/
uint64_t rss_hf = ETH_RSS_IP; /* RSS IP by default. */
/*
* Port topology configuration
*/
uint16_t port_topology = PORT_TOPOLOGY_PAIRED; /* Ports are paired by default */
/*
* Avoids to flush all the RX streams before starts forwarding.
*/
uint8_t no_flush_rx = 0; /* flush by default */
/*
* Flow API isolated mode.
*/
uint8_t flow_isolate_all;
/*
* Avoids to check link status when starting/stopping a port.
*/
uint8_t no_link_check = 0; /* check by default */
/*
* Enable link status change notification
*/
uint8_t lsc_interrupt = 1; /* enabled by default */
/*
* Enable device removal notification.
*/
uint8_t rmv_interrupt = 1; /* enabled by default */
uint8_t hot_plug = 0; /**< hotplug disabled by default. */
/*
* Display or mask ether events
* Default to all events except VF_MBOX
*/
uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
(UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
(UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
(UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
(UINT32_C(1) << RTE_ETH_EVENT_IPSEC) |
(UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
(UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
/*
* Decide if all memory are locked for performance.
*/
int do_mlockall = 0;
/*
* NIC bypass mode configuration options.
*/
#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
/* The NIC bypass watchdog timeout. */
uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
#endif
#ifdef RTE_LIBRTE_LATENCY_STATS
/*
* Set when latency stats is enabled in the commandline
*/
uint8_t latencystats_enabled;
/*
* Lcore ID to serive latency statistics.
*/
lcoreid_t latencystats_lcore_id = -1;
#endif
/*
* Ethernet device configuration.
*/
struct rte_eth_rxmode rx_mode = {
.max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
.offloads = DEV_RX_OFFLOAD_CRC_STRIP,
.ignore_offload_bitfield = 1,
};
struct rte_eth_txmode tx_mode = {
.offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE,
};
struct rte_fdir_conf fdir_conf = {
.mode = RTE_FDIR_MODE_NONE,
.pballoc = RTE_FDIR_PBALLOC_64K,
.status = RTE_FDIR_REPORT_STATUS,
.mask = {
.vlan_tci_mask = 0x0,
.ipv4_mask = {
.src_ip = 0xFFFFFFFF,
.dst_ip = 0xFFFFFFFF,
},
.ipv6_mask = {
.src_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
.dst_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
},
.src_port_mask = 0xFFFF,
.dst_port_mask = 0xFFFF,
.mac_addr_byte_mask = 0xFF,
.tunnel_type_mask = 1,
.tunnel_id_mask = 0xFFFFFFFF,
},
.drop_queue = 127,
};
volatile int test_done = 1; /* stop packet forwarding when set to 1. */
struct queue_stats_mappings tx_queue_stats_mappings_array[MAX_TX_QUEUE_STATS_MAPPINGS];
struct queue_stats_mappings rx_queue_stats_mappings_array[MAX_RX_QUEUE_STATS_MAPPINGS];
struct queue_stats_mappings *tx_queue_stats_mappings = tx_queue_stats_mappings_array;
struct queue_stats_mappings *rx_queue_stats_mappings = rx_queue_stats_mappings_array;
uint16_t nb_tx_queue_stats_mappings = 0;
uint16_t nb_rx_queue_stats_mappings = 0;
/*
* Display zero values by default for xstats
*/
uint8_t xstats_hide_zero;
unsigned int num_sockets = 0;
unsigned int socket_ids[RTE_MAX_NUMA_NODES];
#ifdef RTE_LIBRTE_BITRATE
/* Bitrate statistics */
struct rte_stats_bitrates *bitrate_data;
lcoreid_t bitrate_lcore_id;
uint8_t bitrate_enabled;
#endif
struct gro_status gro_ports[RTE_MAX_ETHPORTS];
uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES;
/* Forward function declarations */
static void map_port_queue_stats_mapping_registers(portid_t pi,
struct rte_port *port);
static void check_all_ports_link_status(uint32_t port_mask);
static int eth_event_callback(portid_t port_id,
enum rte_eth_event_type type,
void *param, void *ret_param);
static void eth_dev_event_callback(char *device_name,
enum rte_dev_event_type type,
void *param);
static int eth_dev_event_callback_register(void);
static int eth_dev_event_callback_unregister(void);
/*
* Check if all the ports are started.
* If yes, return positive value. If not, return zero.
*/
static int all_ports_started(void);
struct gso_status gso_ports[RTE_MAX_ETHPORTS];
uint16_t gso_max_segment_size = ETHER_MAX_LEN - ETHER_CRC_LEN;
/*
* Helper function to check if socket is already discovered.
* If yes, return positive value. If not, return zero.
*/
int
new_socket_id(unsigned int socket_id)
{
unsigned int i;
for (i = 0; i < num_sockets; i++) {
if (socket_ids[i] == socket_id)
return 0;
}
return 1;
}
/*
* Setup default configuration.
*/
static void
set_default_fwd_lcores_config(void)
{
unsigned int i;
unsigned int nb_lc;
unsigned int sock_num;
nb_lc = 0;
for (i = 0; i < RTE_MAX_LCORE; i++) {
sock_num = rte_lcore_to_socket_id(i);
if (new_socket_id(sock_num)) {
if (num_sockets >= RTE_MAX_NUMA_NODES) {
rte_exit(EXIT_FAILURE,
"Total sockets greater than %u\n",
RTE_MAX_NUMA_NODES);
}
socket_ids[num_sockets++] = sock_num;
}
if (!rte_lcore_is_enabled(i))
continue;
if (i == rte_get_master_lcore())
continue;
fwd_lcores_cpuids[nb_lc++] = i;
}
nb_lcores = (lcoreid_t) nb_lc;
nb_cfg_lcores = nb_lcores;
nb_fwd_lcores = 1;
}
static void
set_def_peer_eth_addrs(void)
{
portid_t i;
for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
peer_eth_addrs[i].addr_bytes[0] = ETHER_LOCAL_ADMIN_ADDR;
peer_eth_addrs[i].addr_bytes[5] = i;
}
}
static void
set_default_fwd_ports_config(void)
{
portid_t pt_id;
int i = 0;
RTE_ETH_FOREACH_DEV(pt_id)
fwd_ports_ids[i++] = pt_id;
nb_cfg_ports = nb_ports;
nb_fwd_ports = nb_ports;
}
void
set_def_fwd_config(void)
{
set_default_fwd_lcores_config();
set_def_peer_eth_addrs();
set_default_fwd_ports_config();
}
/*
* Configuration initialisation done once at init time.
*/
static void
mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
unsigned int socket_id)
{
char pool_name[RTE_MEMPOOL_NAMESIZE];
struct rte_mempool *rte_mp = NULL;
uint32_t mb_size;
mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name));
TESTPMD_LOG(INFO,
"create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
pool_name, nb_mbuf, mbuf_seg_size, socket_id);
if (mp_anon != 0) {
rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf,
mb_size, (unsigned) mb_mempool_cache,
sizeof(struct rte_pktmbuf_pool_private),
socket_id, 0);
if (rte_mp == NULL)
goto err;
if (rte_mempool_populate_anon(rte_mp) == 0) {
rte_mempool_free(rte_mp);
rte_mp = NULL;
goto err;
}
rte_pktmbuf_pool_init(rte_mp, NULL);
rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
} else {
/* wrapper to rte_mempool_create() */
TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n",
rte_mbuf_best_mempool_ops());
rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
mb_mempool_cache, 0, mbuf_seg_size, socket_id);
}
err:
if (rte_mp == NULL) {
rte_exit(EXIT_FAILURE,
"Creation of mbuf pool for socket %u failed: %s\n",
socket_id, rte_strerror(rte_errno));
} else if (verbose_level > 0) {
rte_mempool_dump(stdout, rte_mp);
}
}
/*
* Check given socket id is valid or not with NUMA mode,
* if valid, return 0, else return -1
*/
static int
check_socket_id(const unsigned int socket_id)
{
static int warning_once = 0;
if (new_socket_id(socket_id)) {
if (!warning_once && numa_support)
printf("Warning: NUMA should be configured manually by"
" using --port-numa-config and"
" --ring-numa-config parameters along with"
" --numa.\n");
warning_once = 1;
return -1;
}
return 0;
}
/*
* Get the allowed maximum number of RX queues.
* *pid return the port id which has minimal value of
* max_rx_queues in all ports.
*/
queueid_t
get_allowed_max_nb_rxq(portid_t *pid)
{
queueid_t allowed_max_rxq = MAX_QUEUE_ID;
portid_t pi;
struct rte_eth_dev_info dev_info;
RTE_ETH_FOREACH_DEV(pi) {
rte_eth_dev_info_get(pi, &dev_info);
if (dev_info.max_rx_queues < allowed_max_rxq) {
allowed_max_rxq = dev_info.max_rx_queues;
*pid = pi;
}
}
return allowed_max_rxq;
}
/*
* Check input rxq is valid or not.
* If input rxq is not greater than any of maximum number
* of RX queues of all ports, it is valid.
* if valid, return 0, else return -1
*/
int
check_nb_rxq(queueid_t rxq)
{
queueid_t allowed_max_rxq;
portid_t pid = 0;
allowed_max_rxq = get_allowed_max_nb_rxq(&pid);
if (rxq > allowed_max_rxq) {
printf("Fail: input rxq (%u) can't be greater "
"than max_rx_queues (%u) of port %u\n",
rxq,
allowed_max_rxq,
pid);
return -1;
}
return 0;
}
/*
* Get the allowed maximum number of TX queues.
* *pid return the port id which has minimal value of
* max_tx_queues in all ports.
*/
queueid_t
get_allowed_max_nb_txq(portid_t *pid)
{
queueid_t allowed_max_txq = MAX_QUEUE_ID;
portid_t pi;
struct rte_eth_dev_info dev_info;
RTE_ETH_FOREACH_DEV(pi) {
rte_eth_dev_info_get(pi, &dev_info);
if (dev_info.max_tx_queues < allowed_max_txq) {
allowed_max_txq = dev_info.max_tx_queues;
*pid = pi;
}
}
return allowed_max_txq;
}
/*
* Check input txq is valid or not.
* If input txq is not greater than any of maximum number
* of TX queues of all ports, it is valid.
* if valid, return 0, else return -1
*/
int
check_nb_txq(queueid_t txq)
{
queueid_t allowed_max_txq;
portid_t pid = 0;
allowed_max_txq = get_allowed_max_nb_txq(&pid);
if (txq > allowed_max_txq) {
printf("Fail: input txq (%u) can't be greater "
"than max_tx_queues (%u) of port %u\n",
txq,
allowed_max_txq,
pid);
return -1;
}
return 0;
}
static void
init_config(void)
{
portid_t pid;
struct rte_port *port;
struct rte_mempool *mbp;
unsigned int nb_mbuf_per_pool;
lcoreid_t lc_id;
uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
struct rte_gro_param gro_param;
uint32_t gso_types;
memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
if (numa_support) {
memset(port_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
memset(rxring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
memset(txring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
}
/* Configuration of logical cores. */
fwd_lcores = rte_zmalloc("testpmd: fwd_lcores",
sizeof(struct fwd_lcore *) * nb_lcores,
RTE_CACHE_LINE_SIZE);
if (fwd_lcores == NULL) {
rte_exit(EXIT_FAILURE, "rte_zmalloc(%d (struct fwd_lcore *)) "
"failed\n", nb_lcores);
}
for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
fwd_lcores[lc_id] = rte_zmalloc("testpmd: struct fwd_lcore",
sizeof(struct fwd_lcore),
RTE_CACHE_LINE_SIZE);
if (fwd_lcores[lc_id] == NULL) {
rte_exit(EXIT_FAILURE, "rte_zmalloc(struct fwd_lcore) "
"failed\n");
}
fwd_lcores[lc_id]->cpuid_idx = lc_id;
}
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
/* Apply default TxRx configuration for all ports */
port->dev_conf.txmode = tx_mode;
port->dev_conf.rxmode = rx_mode;
rte_eth_dev_info_get(pid, &port->dev_info);
if (!(port->dev_info.tx_offload_capa &
DEV_TX_OFFLOAD_MBUF_FAST_FREE))
port->dev_conf.txmode.offloads &=
~DEV_TX_OFFLOAD_MBUF_FAST_FREE;
if (numa_support) {
if (port_numa[pid] != NUMA_NO_CONFIG)
port_per_socket[port_numa[pid]]++;
else {
uint32_t socket_id = rte_eth_dev_socket_id(pid);
/* if socket_id is invalid, set to 0 */
if (check_socket_id(socket_id) < 0)
socket_id = 0;
port_per_socket[socket_id]++;
}
}
/* set flag to initialize port/queue */
port->need_reconfig = 1;
port->need_reconfig_queues = 1;
}
app/testpmd: fix number of mbufs in pool The number of mbufs in pools is not consistent depending on the options passed by the user and the number of ports, especially in numa mode, when the number of mbuf is specified by the user. When the user specifies the number of mbuf (per pool), it should overrides the default value. - before the patch ./build/app/testpmd -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd -- --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=256000, size=2176, socket=0 <mbuf_pool_socket_1>: n=256000, size=2176, socket=1 # BAD, should be n=8000 for each socket ./build/app/testpmd -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd -- --no-numa --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=128000, size=2176, socket=0 <mbuf_pool_socket_1>: n=128000, size=2176, socket=1 # BAD, should be n=8000 for each socket ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 - after the patch ./build/app/testpmd -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd -- --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 <mbuf_pool_socket_1>: n=8000, size=2176, socket=1 ./build/app/testpmd -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd -- --no-numa --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 <mbuf_pool_socket_1>: n=8000, size=2176, socket=1 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 Fixes: b6ea6408fbc7 ("ethdev: store numa_node per device") Cc: stable@dpdk.org Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2017-04-24 12:33:58 +00:00
/*
* Create pools of mbuf.
* If NUMA support is disabled, create a single pool of mbuf in
* socket 0 memory by default.
* Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
*
* Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
* nb_txd can be configured at run time.
*/
if (param_total_num_mbufs)
nb_mbuf_per_pool = param_total_num_mbufs;
else {
nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX +
(nb_lcores * mb_mempool_cache) +
RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
nb_mbuf_per_pool *= RTE_MAX_ETHPORTS;
}
if (numa_support) {
uint8_t i;
for (i = 0; i < num_sockets; i++)
mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
socket_ids[i]);
app/testpmd: fix number of mbufs in pool The number of mbufs in pools is not consistent depending on the options passed by the user and the number of ports, especially in numa mode, when the number of mbuf is specified by the user. When the user specifies the number of mbuf (per pool), it should overrides the default value. - before the patch ./build/app/testpmd -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd -- --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=256000, size=2176, socket=0 <mbuf_pool_socket_1>: n=256000, size=2176, socket=1 # BAD, should be n=8000 for each socket ./build/app/testpmd -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd -- --no-numa --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=128000, size=2176, socket=0 <mbuf_pool_socket_1>: n=128000, size=2176, socket=1 # BAD, should be n=8000 for each socket ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 - after the patch ./build/app/testpmd -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd -- --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 <mbuf_pool_socket_1>: n=8000, size=2176, socket=1 ./build/app/testpmd -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd -- --no-numa --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 <mbuf_pool_socket_1>: n=8000, size=2176, socket=1 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 Fixes: b6ea6408fbc7 ("ethdev: store numa_node per device") Cc: stable@dpdk.org Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2017-04-24 12:33:58 +00:00
} else {
if (socket_num == UMA_NO_CONFIG)
mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
else
mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
socket_num);
}
app/testpmd: fix number of mbufs in pool The number of mbufs in pools is not consistent depending on the options passed by the user and the number of ports, especially in numa mode, when the number of mbuf is specified by the user. When the user specifies the number of mbuf (per pool), it should overrides the default value. - before the patch ./build/app/testpmd -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd -- --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=256000, size=2176, socket=0 <mbuf_pool_socket_1>: n=256000, size=2176, socket=1 # BAD, should be n=8000 for each socket ./build/app/testpmd -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd -- --no-numa --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=128000, size=2176, socket=0 <mbuf_pool_socket_1>: n=128000, size=2176, socket=1 # BAD, should be n=8000 for each socket ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 - after the patch ./build/app/testpmd -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd -- --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 <mbuf_pool_socket_1>: n=8000, size=2176, socket=1 ./build/app/testpmd -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd -- --no-numa --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 <mbuf_pool_socket_1>: n=331456, size=2176, socket=1 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 <mbuf_pool_socket_1>: n=8000, size=2176, socket=1 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa -i <mbuf_pool_socket_0>: n=331456, size=2176, socket=0 ./build/app/testpmd --vdev=eth_null0 --vdev=eth_null1 -- --no-numa \ --total-num-mbufs=8000 -i <mbuf_pool_socket_0>: n=8000, size=2176, socket=0 Fixes: b6ea6408fbc7 ("ethdev: store numa_node per device") Cc: stable@dpdk.org Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
2017-04-24 12:33:58 +00:00
init_port_config();
gso_types = DEV_TX_OFFLOAD_TCP_TSO | DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
DEV_TX_OFFLOAD_GRE_TNL_TSO;
/*
* Records which Mbuf pool to use by each logical core, if needed.
*/
for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
mbp = mbuf_pool_find(
rte_lcore_to_socket_id(fwd_lcores_cpuids[lc_id]));
if (mbp == NULL)
mbp = mbuf_pool_find(0);
fwd_lcores[lc_id]->mbp = mbp;
/* initialize GSO context */
fwd_lcores[lc_id]->gso_ctx.direct_pool = mbp;
fwd_lcores[lc_id]->gso_ctx.indirect_pool = mbp;
fwd_lcores[lc_id]->gso_ctx.gso_types = gso_types;
fwd_lcores[lc_id]->gso_ctx.gso_size = ETHER_MAX_LEN -
ETHER_CRC_LEN;
fwd_lcores[lc_id]->gso_ctx.flag = 0;
}
/* Configuration of packet forwarding streams. */
if (init_fwd_streams() < 0)
rte_exit(EXIT_FAILURE, "FAIL from init_fwd_streams()\n");
fwd_config_setup();
/* create a gro context for each lcore */
gro_param.gro_types = RTE_GRO_TCP_IPV4;
gro_param.max_flow_num = GRO_MAX_FLUSH_CYCLES;
gro_param.max_item_per_flow = MAX_PKT_BURST;
for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
gro_param.socket_id = rte_lcore_to_socket_id(
fwd_lcores_cpuids[lc_id]);
fwd_lcores[lc_id]->gro_ctx = rte_gro_ctx_create(&gro_param);
if (fwd_lcores[lc_id]->gro_ctx == NULL) {
rte_exit(EXIT_FAILURE,
"rte_gro_ctx_create() failed\n");
}
}
}
void
reconfig(portid_t new_port_id, unsigned socket_id)
{
struct rte_port *port;
/* Reconfiguration of Ethernet ports. */
port = &ports[new_port_id];
rte_eth_dev_info_get(new_port_id, &port->dev_info);
/* set flag to initialize port/queue */
port->need_reconfig = 1;
port->need_reconfig_queues = 1;
port->socket_id = socket_id;
init_port_config();
}
int
init_fwd_streams(void)
{
portid_t pid;
struct rte_port *port;
streamid_t sm_id, nb_fwd_streams_new;
queueid_t q;
/* set socket id according to numa or not */
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
if (nb_rxq > port->dev_info.max_rx_queues) {
printf("Fail: nb_rxq(%d) is greater than "
"max_rx_queues(%d)\n", nb_rxq,
port->dev_info.max_rx_queues);
return -1;
}
if (nb_txq > port->dev_info.max_tx_queues) {
printf("Fail: nb_txq(%d) is greater than "
"max_tx_queues(%d)\n", nb_txq,
port->dev_info.max_tx_queues);
return -1;
}
if (numa_support) {
if (port_numa[pid] != NUMA_NO_CONFIG)
port->socket_id = port_numa[pid];
else {
port->socket_id = rte_eth_dev_socket_id(pid);
/* if socket_id is invalid, set to 0 */
if (check_socket_id(port->socket_id) < 0)
port->socket_id = 0;
}
}
else {
if (socket_num == UMA_NO_CONFIG)
port->socket_id = 0;
else
port->socket_id = socket_num;
}
}
q = RTE_MAX(nb_rxq, nb_txq);
if (q == 0) {
printf("Fail: Cannot allocate fwd streams as number of queues is 0\n");
return -1;
}
nb_fwd_streams_new = (streamid_t)(nb_ports * q);
if (nb_fwd_streams_new == nb_fwd_streams)
return 0;
/* clear the old */
if (fwd_streams != NULL) {
for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
if (fwd_streams[sm_id] == NULL)
continue;
rte_free(fwd_streams[sm_id]);
fwd_streams[sm_id] = NULL;
}
rte_free(fwd_streams);
fwd_streams = NULL;
}
/* init new */
nb_fwd_streams = nb_fwd_streams_new;
if (nb_fwd_streams) {
fwd_streams = rte_zmalloc("testpmd: fwd_streams",
sizeof(struct fwd_stream *) * nb_fwd_streams,
RTE_CACHE_LINE_SIZE);
if (fwd_streams == NULL)
rte_exit(EXIT_FAILURE, "rte_zmalloc(%d"
" (struct fwd_stream *)) failed\n",
nb_fwd_streams);
for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
fwd_streams[sm_id] = rte_zmalloc("testpmd:"
" struct fwd_stream", sizeof(struct fwd_stream),
RTE_CACHE_LINE_SIZE);
if (fwd_streams[sm_id] == NULL)
rte_exit(EXIT_FAILURE, "rte_zmalloc"
"(struct fwd_stream) failed\n");
}
}
return 0;
}
#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
static void
pkt_burst_stats_display(const char *rx_tx, struct pkt_burst_stats *pbs)
{
unsigned int total_burst;
unsigned int nb_burst;
unsigned int burst_stats[3];
uint16_t pktnb_stats[3];
uint16_t nb_pkt;
int burst_percent[3];
/*
* First compute the total number of packet bursts and the
* two highest numbers of bursts of the same number of packets.
*/
total_burst = 0;
burst_stats[0] = burst_stats[1] = burst_stats[2] = 0;
pktnb_stats[0] = pktnb_stats[1] = pktnb_stats[2] = 0;
for (nb_pkt = 0; nb_pkt < MAX_PKT_BURST; nb_pkt++) {
nb_burst = pbs->pkt_burst_spread[nb_pkt];
if (nb_burst == 0)
continue;
total_burst += nb_burst;
if (nb_burst > burst_stats[0]) {
burst_stats[1] = burst_stats[0];
pktnb_stats[1] = pktnb_stats[0];
burst_stats[0] = nb_burst;
pktnb_stats[0] = nb_pkt;
}
}
if (total_burst == 0)
return;
burst_percent[0] = (burst_stats[0] * 100) / total_burst;
printf(" %s-bursts : %u [%d%% of %d pkts", rx_tx, total_burst,
burst_percent[0], (int) pktnb_stats[0]);
if (burst_stats[0] == total_burst) {
printf("]\n");
return;
}
if (burst_stats[0] + burst_stats[1] == total_burst) {
printf(" + %d%% of %d pkts]\n",
100 - burst_percent[0], pktnb_stats[1]);
return;
}
burst_percent[1] = (burst_stats[1] * 100) / total_burst;
burst_percent[2] = 100 - (burst_percent[0] + burst_percent[1]);
if ((burst_percent[1] == 0) || (burst_percent[2] == 0)) {
printf(" + %d%% of others]\n", 100 - burst_percent[0]);
return;
}
printf(" + %d%% of %d pkts + %d%% of others]\n",
burst_percent[1], (int) pktnb_stats[1], burst_percent[2]);
}
#endif /* RTE_TEST_PMD_RECORD_BURST_STATS */
static void
fwd_port_stats_display(portid_t port_id, struct rte_eth_stats *stats)
{
struct rte_port *port;
uint8_t i;
static const char *fwd_stats_border = "----------------------";
port = &ports[port_id];
printf("\n %s Forward statistics for port %-2d %s\n",
fwd_stats_border, port_id, fwd_stats_border);
if ((!port->rx_queue_stats_mapping_enabled) && (!port->tx_queue_stats_mapping_enabled)) {
printf(" RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: "
"%-"PRIu64"\n",
stats->ipackets, stats->imissed,
(uint64_t) (stats->ipackets + stats->imissed));
if (cur_fwd_eng == &csum_fwd_engine)
printf(" Bad-ipcsum: %-14"PRIu64" Bad-l4csum: %-14"PRIu64" \n",
port->rx_bad_ip_csum, port->rx_bad_l4_csum);
if ((stats->ierrors + stats->rx_nombuf) > 0) {
printf(" RX-error: %-"PRIu64"\n", stats->ierrors);
printf(" RX-nombufs: %-14"PRIu64"\n", stats->rx_nombuf);
}
printf(" TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: "
"%-"PRIu64"\n",
stats->opackets, port->tx_dropped,
(uint64_t) (stats->opackets + port->tx_dropped));
}
else {
printf(" RX-packets: %14"PRIu64" RX-dropped:%14"PRIu64" RX-total:"
"%14"PRIu64"\n",
stats->ipackets, stats->imissed,
(uint64_t) (stats->ipackets + stats->imissed));
if (cur_fwd_eng == &csum_fwd_engine)
printf(" Bad-ipcsum:%14"PRIu64" Bad-l4csum:%14"PRIu64"\n",
port->rx_bad_ip_csum, port->rx_bad_l4_csum);
if ((stats->ierrors + stats->rx_nombuf) > 0) {
printf(" RX-error:%"PRIu64"\n", stats->ierrors);
printf(" RX-nombufs: %14"PRIu64"\n",
stats->rx_nombuf);
}
printf(" TX-packets: %14"PRIu64" TX-dropped:%14"PRIu64" TX-total:"
"%14"PRIu64"\n",
stats->opackets, port->tx_dropped,
(uint64_t) (stats->opackets + port->tx_dropped));
}
#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
if (port->rx_stream)
pkt_burst_stats_display("RX",
&port->rx_stream->rx_burst_stats);
if (port->tx_stream)
pkt_burst_stats_display("TX",
&port->tx_stream->tx_burst_stats);
#endif
if (port->rx_queue_stats_mapping_enabled) {
printf("\n");
for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS; i++) {
printf(" Stats reg %2d RX-packets:%14"PRIu64
" RX-errors:%14"PRIu64
" RX-bytes:%14"PRIu64"\n",
i, stats->q_ipackets[i], stats->q_errors[i], stats->q_ibytes[i]);
}
printf("\n");
}
if (port->tx_queue_stats_mapping_enabled) {
for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS; i++) {
printf(" Stats reg %2d TX-packets:%14"PRIu64
" TX-bytes:%14"PRIu64"\n",
i, stats->q_opackets[i], stats->q_obytes[i]);
}
}
printf(" %s--------------------------------%s\n",
fwd_stats_border, fwd_stats_border);
}
static void
fwd_stream_stats_display(streamid_t stream_id)
{
struct fwd_stream *fs;
static const char *fwd_top_stats_border = "-------";
fs = fwd_streams[stream_id];
if ((fs->rx_packets == 0) && (fs->tx_packets == 0) &&
(fs->fwd_dropped == 0))
return;
printf("\n %s Forward Stats for RX Port=%2d/Queue=%2d -> "
"TX Port=%2d/Queue=%2d %s\n",
fwd_top_stats_border, fs->rx_port, fs->rx_queue,
fs->tx_port, fs->tx_queue, fwd_top_stats_border);
printf(" RX-packets: %-14u TX-packets: %-14u TX-dropped: %-14u",
fs->rx_packets, fs->tx_packets, fs->fwd_dropped);
/* if checksum mode */
if (cur_fwd_eng == &csum_fwd_engine) {
printf(" RX- bad IP checksum: %-14u Rx- bad L4 checksum: "
"%-14u\n", fs->rx_bad_ip_csum, fs->rx_bad_l4_csum);
}
#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
pkt_burst_stats_display("RX", &fs->rx_burst_stats);
pkt_burst_stats_display("TX", &fs->tx_burst_stats);
#endif
}
static void
flush_fwd_rx_queues(void)
{
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
portid_t rxp;
portid_t port_id;
queueid_t rxq;
uint16_t nb_rx;
uint16_t i;
uint8_t j;
uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
uint64_t timer_period;
/* convert to number of cycles */
timer_period = rte_get_timer_hz(); /* 1 second timeout */
for (j = 0; j < 2; j++) {
for (rxp = 0; rxp < cur_fwd_config.nb_fwd_ports; rxp++) {
for (rxq = 0; rxq < nb_rxq; rxq++) {
port_id = fwd_ports_ids[rxp];
/**
* testpmd can stuck in the below do while loop
* if rte_eth_rx_burst() always returns nonzero
* packets. So timer is added to exit this loop
* after 1sec timer expiry.
*/
prev_tsc = rte_rdtsc();
do {
nb_rx = rte_eth_rx_burst(port_id, rxq,
pkts_burst, MAX_PKT_BURST);
for (i = 0; i < nb_rx; i++)
rte_pktmbuf_free(pkts_burst[i]);
cur_tsc = rte_rdtsc();
diff_tsc = cur_tsc - prev_tsc;
timer_tsc += diff_tsc;
} while ((nb_rx > 0) &&
(timer_tsc < timer_period));
timer_tsc = 0;
}
}
rte_delay_ms(10); /* wait 10 milli-seconds before retrying */
}
}
static void
run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
{
struct fwd_stream **fsm;
streamid_t nb_fs;
streamid_t sm_id;
#ifdef RTE_LIBRTE_BITRATE
uint64_t tics_per_1sec;
uint64_t tics_datum;
uint64_t tics_current;
uint16_t idx_port;
tics_datum = rte_rdtsc();
tics_per_1sec = rte_get_timer_hz();
#endif
fsm = &fwd_streams[fc->stream_idx];
nb_fs = fc->stream_nb;
do {
for (sm_id = 0; sm_id < nb_fs; sm_id++)
(*pkt_fwd)(fsm[sm_id]);
#ifdef RTE_LIBRTE_BITRATE
if (bitrate_enabled != 0 &&
bitrate_lcore_id == rte_lcore_id()) {
tics_current = rte_rdtsc();
if (tics_current - tics_datum >= tics_per_1sec) {
/* Periodic bitrate calculation */
RTE_ETH_FOREACH_DEV(idx_port)
rte_stats_bitrate_calc(bitrate_data,
idx_port);
tics_datum = tics_current;
}
}
#endif
#ifdef RTE_LIBRTE_LATENCY_STATS
if (latencystats_enabled != 0 &&
latencystats_lcore_id == rte_lcore_id())
rte_latencystats_update();
#endif
} while (! fc->stopped);
}
static int
start_pkt_forward_on_core(void *fwd_arg)
{
run_pkt_fwd_on_lcore((struct fwd_lcore *) fwd_arg,
cur_fwd_config.fwd_eng->packet_fwd);
return 0;
}
/*
* Run the TXONLY packet forwarding engine to send a single burst of packets.
* Used to start communication flows in network loopback test configurations.
*/
static int
run_one_txonly_burst_on_core(void *fwd_arg)
{
struct fwd_lcore *fwd_lc;
struct fwd_lcore tmp_lcore;
fwd_lc = (struct fwd_lcore *) fwd_arg;
tmp_lcore = *fwd_lc;
tmp_lcore.stopped = 1;
run_pkt_fwd_on_lcore(&tmp_lcore, tx_only_engine.packet_fwd);
return 0;
}
/*
* Launch packet forwarding:
* - Setup per-port forwarding context.
* - launch logical cores with their forwarding configuration.
*/
static void
launch_packet_forwarding(lcore_function_t *pkt_fwd_on_lcore)
{
port_fwd_begin_t port_fwd_begin;
unsigned int i;
unsigned int lc_id;
int diag;
port_fwd_begin = cur_fwd_config.fwd_eng->port_fwd_begin;
if (port_fwd_begin != NULL) {
for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
(*port_fwd_begin)(fwd_ports_ids[i]);
}
for (i = 0; i < cur_fwd_config.nb_fwd_lcores; i++) {
lc_id = fwd_lcores_cpuids[i];
if ((interactive == 0) || (lc_id != rte_lcore_id())) {
fwd_lcores[i]->stopped = 0;
diag = rte_eal_remote_launch(pkt_fwd_on_lcore,
fwd_lcores[i], lc_id);
if (diag != 0)
printf("launch lcore %u failed - diag=%d\n",
lc_id, diag);
}
}
}
/*
* Update the forward ports list.
*/
void
update_fwd_ports(portid_t new_pid)
{
unsigned int i;
unsigned int new_nb_fwd_ports = 0;
int move = 0;
for (i = 0; i < nb_fwd_ports; ++i) {
if (port_id_is_invalid(fwd_ports_ids[i], DISABLED_WARN))
move = 1;
else if (move)
fwd_ports_ids[new_nb_fwd_ports++] = fwd_ports_ids[i];
else
new_nb_fwd_ports++;
}
if (new_pid < RTE_MAX_ETHPORTS)
fwd_ports_ids[new_nb_fwd_ports++] = new_pid;
nb_fwd_ports = new_nb_fwd_ports;
nb_cfg_ports = new_nb_fwd_ports;
}
/*
* Launch packet forwarding configuration.
*/
void
start_packet_forwarding(int with_tx_first)
{
port_fwd_begin_t port_fwd_begin;
port_fwd_end_t port_fwd_end;
struct rte_port *port;
unsigned int i;
portid_t pt_id;
streamid_t sm_id;
if (strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") == 0 && !nb_rxq)
rte_exit(EXIT_FAILURE, "rxq are 0, cannot use rxonly fwd mode\n");
if (strcmp(cur_fwd_eng->fwd_mode_name, "txonly") == 0 && !nb_txq)
rte_exit(EXIT_FAILURE, "txq are 0, cannot use txonly fwd mode\n");
if ((strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") != 0 &&
strcmp(cur_fwd_eng->fwd_mode_name, "txonly") != 0) &&
(!nb_rxq || !nb_txq))
rte_exit(EXIT_FAILURE,
"Either rxq or txq are 0, cannot use %s fwd mode\n",
cur_fwd_eng->fwd_mode_name);
if (all_ports_started() == 0) {
printf("Not all ports were started\n");
return;
}
if (test_done == 0) {
printf("Packet forwarding already started\n");
return;
}
if(dcb_test) {
for (i = 0; i < nb_fwd_ports; i++) {
pt_id = fwd_ports_ids[i];
port = &ports[pt_id];
if (!port->dcb_flag) {
printf("In DCB mode, all forwarding ports must "
"be configured in this mode.\n");
return;
}
}
if (nb_fwd_lcores == 1) {
printf("In DCB mode,the nb forwarding cores "
"should be larger than 1.\n");
return;
}
}
test_done = 0;
fwd_config_setup();
if(!no_flush_rx)
flush_fwd_rx_queues();
pkt_fwd_config_display(&cur_fwd_config);
rxtx_config_display();
for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
pt_id = fwd_ports_ids[i];
port = &ports[pt_id];
rte_eth_stats_get(pt_id, &port->stats);
port->tx_dropped = 0;
map_port_queue_stats_mapping_registers(pt_id, port);
}
for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
fwd_streams[sm_id]->rx_packets = 0;
fwd_streams[sm_id]->tx_packets = 0;
fwd_streams[sm_id]->fwd_dropped = 0;
fwd_streams[sm_id]->rx_bad_ip_csum = 0;
fwd_streams[sm_id]->rx_bad_l4_csum = 0;
#ifdef RTE_TEST_PMD_RECORD_BURST_STATS
memset(&fwd_streams[sm_id]->rx_burst_stats, 0,
sizeof(fwd_streams[sm_id]->rx_burst_stats));
memset(&fwd_streams[sm_id]->tx_burst_stats, 0,
sizeof(fwd_streams[sm_id]->tx_burst_stats));
#endif
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
fwd_streams[sm_id]->core_cycles = 0;
#endif
}
if (with_tx_first) {
port_fwd_begin = tx_only_engine.port_fwd_begin;
if (port_fwd_begin != NULL) {
for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
(*port_fwd_begin)(fwd_ports_ids[i]);
}
while (with_tx_first--) {
launch_packet_forwarding(
run_one_txonly_burst_on_core);
rte_eal_mp_wait_lcore();
}
port_fwd_end = tx_only_engine.port_fwd_end;
if (port_fwd_end != NULL) {
for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
(*port_fwd_end)(fwd_ports_ids[i]);
}
}
launch_packet_forwarding(start_pkt_forward_on_core);
}
void
stop_packet_forwarding(void)
{
struct rte_eth_stats stats;
struct rte_port *port;
port_fwd_end_t port_fwd_end;
int i;
portid_t pt_id;
streamid_t sm_id;
lcoreid_t lc_id;
uint64_t total_recv;
uint64_t total_xmit;
uint64_t total_rx_dropped;
uint64_t total_tx_dropped;
uint64_t total_rx_nombuf;
uint64_t tx_dropped;
uint64_t rx_bad_ip_csum;
uint64_t rx_bad_l4_csum;
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
uint64_t fwd_cycles;
#endif
static const char *acc_stats_border = "+++++++++++++++";
if (test_done) {
printf("Packet forwarding not started\n");
return;
}
printf("Telling cores to stop...");
for (lc_id = 0; lc_id < cur_fwd_config.nb_fwd_lcores; lc_id++)
fwd_lcores[lc_id]->stopped = 1;
printf("\nWaiting for lcores to finish...\n");
rte_eal_mp_wait_lcore();
port_fwd_end = cur_fwd_config.fwd_eng->port_fwd_end;
if (port_fwd_end != NULL) {
for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
pt_id = fwd_ports_ids[i];
(*port_fwd_end)(pt_id);
}
}
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
fwd_cycles = 0;
#endif
for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
if (cur_fwd_config.nb_fwd_streams >
cur_fwd_config.nb_fwd_ports) {
fwd_stream_stats_display(sm_id);
ports[fwd_streams[sm_id]->tx_port].tx_stream = NULL;
ports[fwd_streams[sm_id]->rx_port].rx_stream = NULL;
} else {
ports[fwd_streams[sm_id]->tx_port].tx_stream =
fwd_streams[sm_id];
ports[fwd_streams[sm_id]->rx_port].rx_stream =
fwd_streams[sm_id];
}
tx_dropped = ports[fwd_streams[sm_id]->tx_port].tx_dropped;
tx_dropped = (uint64_t) (tx_dropped +
fwd_streams[sm_id]->fwd_dropped);
ports[fwd_streams[sm_id]->tx_port].tx_dropped = tx_dropped;
rx_bad_ip_csum =
ports[fwd_streams[sm_id]->rx_port].rx_bad_ip_csum;
rx_bad_ip_csum = (uint64_t) (rx_bad_ip_csum +
fwd_streams[sm_id]->rx_bad_ip_csum);
ports[fwd_streams[sm_id]->rx_port].rx_bad_ip_csum =
rx_bad_ip_csum;
rx_bad_l4_csum =
ports[fwd_streams[sm_id]->rx_port].rx_bad_l4_csum;
rx_bad_l4_csum = (uint64_t) (rx_bad_l4_csum +
fwd_streams[sm_id]->rx_bad_l4_csum);
ports[fwd_streams[sm_id]->rx_port].rx_bad_l4_csum =
rx_bad_l4_csum;
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
fwd_cycles = (uint64_t) (fwd_cycles +
fwd_streams[sm_id]->core_cycles);
#endif
}
total_recv = 0;
total_xmit = 0;
total_rx_dropped = 0;
total_tx_dropped = 0;
total_rx_nombuf = 0;
for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
pt_id = fwd_ports_ids[i];
port = &ports[pt_id];
rte_eth_stats_get(pt_id, &stats);
stats.ipackets -= port->stats.ipackets;
port->stats.ipackets = 0;
stats.opackets -= port->stats.opackets;
port->stats.opackets = 0;
stats.ibytes -= port->stats.ibytes;
port->stats.ibytes = 0;
stats.obytes -= port->stats.obytes;
port->stats.obytes = 0;
stats.imissed -= port->stats.imissed;
port->stats.imissed = 0;
stats.oerrors -= port->stats.oerrors;
port->stats.oerrors = 0;
stats.rx_nombuf -= port->stats.rx_nombuf;
port->stats.rx_nombuf = 0;
total_recv += stats.ipackets;
total_xmit += stats.opackets;
total_rx_dropped += stats.imissed;
total_tx_dropped += port->tx_dropped;
total_rx_nombuf += stats.rx_nombuf;
fwd_port_stats_display(pt_id, &stats);
}
printf("\n %s Accumulated forward statistics for all ports"
"%s\n",
acc_stats_border, acc_stats_border);
printf(" RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: "
"%-"PRIu64"\n"
" TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: "
"%-"PRIu64"\n",
total_recv, total_rx_dropped, total_recv + total_rx_dropped,
total_xmit, total_tx_dropped, total_xmit + total_tx_dropped);
if (total_rx_nombuf > 0)
printf(" RX-nombufs: %-14"PRIu64"\n", total_rx_nombuf);
printf(" %s++++++++++++++++++++++++++++++++++++++++++++++"
"%s\n",
acc_stats_border, acc_stats_border);
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
if (total_recv > 0)
printf("\n CPU cycles/packet=%u (total cycles="
"%"PRIu64" / total RX packets=%"PRIu64")\n",
(unsigned int)(fwd_cycles / total_recv),
fwd_cycles, total_recv);
#endif
printf("\nDone.\n");
test_done = 1;
}
void
dev_set_link_up(portid_t pid)
{
if (rte_eth_dev_set_link_up(pid) < 0)
printf("\nSet link up fail.\n");
}
void
dev_set_link_down(portid_t pid)
{
if (rte_eth_dev_set_link_down(pid) < 0)
printf("\nSet link down fail.\n");
}
static int
all_ports_started(void)
{
portid_t pi;
struct rte_port *port;
RTE_ETH_FOREACH_DEV(pi) {
port = &ports[pi];
/* Check if there is a port which is not started */
if ((port->port_status != RTE_PORT_STARTED) &&
(port->slave_flag == 0))
return 0;
}
/* No port is not started */
return 1;
}
int
port_is_stopped(portid_t port_id)
{
struct rte_port *port = &ports[port_id];
if ((port->port_status != RTE_PORT_STOPPED) &&
(port->slave_flag == 0))
return 0;
return 1;
}
int
all_ports_stopped(void)
{
portid_t pi;
RTE_ETH_FOREACH_DEV(pi) {
if (!port_is_stopped(pi))
return 0;
}
return 1;
}
int
port_is_started(portid_t port_id)
{
if (port_id_is_invalid(port_id, ENABLED_WARN))
return 0;
if (ports[port_id].port_status != RTE_PORT_STARTED)
return 0;
return 1;
}
static int
port_is_closed(portid_t port_id)
{
if (port_id_is_invalid(port_id, ENABLED_WARN))
return 0;
if (ports[port_id].port_status != RTE_PORT_CLOSED)
return 0;
return 1;
}
int
start_port(portid_t pid)
{
int diag, need_check_link_status = -1;
portid_t pi;
queueid_t qi;
struct rte_port *port;
struct ether_addr mac_addr;
enum rte_eth_event_type event_type;
if (port_id_is_invalid(pid, ENABLED_WARN))
return 0;
if(dcb_config)
dcb_test = 1;
RTE_ETH_FOREACH_DEV(pi) {
if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
continue;
need_check_link_status = 0;
port = &ports[pi];
if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STOPPED,
RTE_PORT_HANDLING) == 0) {
printf("Port %d is now not stopped\n", pi);
continue;
}
if (port->need_reconfig > 0) {
port->need_reconfig = 0;
if (flow_isolate_all) {
int ret = port_flow_isolate(pi, 1);
if (ret) {
printf("Failed to apply isolated"
" mode on port %d\n", pi);
return -1;
}
}
printf("Configuring Port %d (socket %u)\n", pi,
port->socket_id);
/* configure port */
diag = rte_eth_dev_configure(pi, nb_rxq, nb_txq,
&(port->dev_conf));
if (diag != 0) {
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
printf("Port %d can not be set back "
"to stopped\n", pi);
printf("Fail to configure port %d\n", pi);
/* try to reconfigure port next time */
port->need_reconfig = 1;
return -1;
}
}
if (port->need_reconfig_queues > 0) {
port->need_reconfig_queues = 0;
/* setup tx queues */
for (qi = 0; qi < nb_txq; qi++) {
port->tx_conf[qi].txq_flags =
ETH_TXQ_FLAGS_IGNORE;
/* Apply Tx offloads configuration */
port->tx_conf[qi].offloads =
port->dev_conf.txmode.offloads;
if ((numa_support) &&
(txring_numa[pi] != NUMA_NO_CONFIG))
diag = rte_eth_tx_queue_setup(pi, qi,
port->nb_tx_desc[qi],
txring_numa[pi],
&(port->tx_conf[qi]));
else
diag = rte_eth_tx_queue_setup(pi, qi,
port->nb_tx_desc[qi],
port->socket_id,
&(port->tx_conf[qi]));
if (diag == 0)
continue;
/* Fail to setup tx queue, return */
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING,
RTE_PORT_STOPPED) == 0)
printf("Port %d can not be set back "
"to stopped\n", pi);
printf("Fail to configure port %d tx queues\n",
pi);
/* try to reconfigure queues next time */
port->need_reconfig_queues = 1;
return -1;
}
for (qi = 0; qi < nb_rxq; qi++) {
/* Apply Rx offloads configuration */
port->rx_conf[qi].offloads =
port->dev_conf.rxmode.offloads;
/* setup rx queues */
if ((numa_support) &&
(rxring_numa[pi] != NUMA_NO_CONFIG)) {
struct rte_mempool * mp =
mbuf_pool_find(rxring_numa[pi]);
if (mp == NULL) {
printf("Failed to setup RX queue:"
"No mempool allocation"
" on the socket %d\n",
rxring_numa[pi]);
return -1;
}
diag = rte_eth_rx_queue_setup(pi, qi,
port->nb_rx_desc[pi],
rxring_numa[pi],
&(port->rx_conf[qi]),
mp);
} else {
struct rte_mempool *mp =
mbuf_pool_find(port->socket_id);
if (mp == NULL) {
printf("Failed to setup RX queue:"
"No mempool allocation"
" on the socket %d\n",
port->socket_id);
return -1;
}
diag = rte_eth_rx_queue_setup(pi, qi,
port->nb_rx_desc[pi],
port->socket_id,
&(port->rx_conf[qi]),
mp);
}
if (diag == 0)
continue;
/* Fail to setup rx queue, return */
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING,
RTE_PORT_STOPPED) == 0)
printf("Port %d can not be set back "
"to stopped\n", pi);
printf("Fail to configure port %d rx queues\n",
pi);
/* try to reconfigure queues next time */
port->need_reconfig_queues = 1;
return -1;
}
}
/* start port */
if (rte_eth_dev_start(pi) < 0) {
printf("Fail to start port %d\n", pi);
/* Fail to setup rx queue, return */
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
printf("Port %d can not be set back to "
"stopped\n", pi);
continue;
}
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
printf("Port %d can not be set into started\n", pi);
rte_eth_macaddr_get(pi, &mac_addr);
printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
mac_addr.addr_bytes[0], mac_addr.addr_bytes[1],
mac_addr.addr_bytes[2], mac_addr.addr_bytes[3],
mac_addr.addr_bytes[4], mac_addr.addr_bytes[5]);
/* at least one port started, need checking link status */
need_check_link_status = 1;
}
for (event_type = RTE_ETH_EVENT_UNKNOWN;
event_type < RTE_ETH_EVENT_MAX;
event_type++) {
diag = rte_eth_dev_callback_register(RTE_ETH_ALL,
event_type,
eth_event_callback,
NULL);
if (diag) {
printf("Failed to setup even callback for event %d\n",
event_type);
return -1;
}
}
if (need_check_link_status == 1 && !no_link_check)
check_all_ports_link_status(RTE_PORT_ALL);
else if (need_check_link_status == 0)
printf("Please stop the ports first\n");
printf("Done\n");
return 0;
}
void
stop_port(portid_t pid)
{
portid_t pi;
struct rte_port *port;
int need_check_link_status = 0;
if (dcb_test) {
dcb_test = 0;
dcb_config = 0;
}
if (port_id_is_invalid(pid, ENABLED_WARN))
return;
printf("Stopping ports...\n");
RTE_ETH_FOREACH_DEV(pi) {
if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
continue;
if (port_is_forwarding(pi) != 0 && test_done == 0) {
printf("Please remove port %d from forwarding configuration.\n", pi);
continue;
}
if (port_is_bonding_slave(pi)) {
printf("Please remove port %d from bonded device.\n", pi);
continue;
}
port = &ports[pi];
if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STARTED,
RTE_PORT_HANDLING) == 0)
continue;
rte_eth_dev_stop(pi);
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
printf("Port %d can not be set into stopped\n", pi);
need_check_link_status = 1;
}
if (need_check_link_status && !no_link_check)
check_all_ports_link_status(RTE_PORT_ALL);
printf("Done\n");
}
void
close_port(portid_t pid)
{
portid_t pi;
struct rte_port *port;
if (port_id_is_invalid(pid, ENABLED_WARN))
return;
printf("Closing ports...\n");
RTE_ETH_FOREACH_DEV(pi) {
if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
continue;
if (port_is_forwarding(pi) != 0 && test_done == 0) {
printf("Please remove port %d from forwarding configuration.\n", pi);
continue;
}
if (port_is_bonding_slave(pi)) {
printf("Please remove port %d from bonded device.\n", pi);
continue;
}
port = &ports[pi];
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) {
printf("Port %d is already closed\n", pi);
continue;
}
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_STOPPED, RTE_PORT_HANDLING) == 0) {
printf("Port %d is now not stopped\n", pi);
continue;
}
if (port->flow_list)
port_flow_flush(pi);
rte_eth_dev_close(pi);
if (rte_atomic16_cmpset(&(port->port_status),
RTE_PORT_HANDLING, RTE_PORT_CLOSED) == 0)
printf("Port %d cannot be set to closed\n", pi);
}
printf("Done\n");
}
void
reset_port(portid_t pid)
{
int diag;
portid_t pi;
struct rte_port *port;
if (port_id_is_invalid(pid, ENABLED_WARN))
return;
printf("Resetting ports...\n");
RTE_ETH_FOREACH_DEV(pi) {
if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
continue;
if (port_is_forwarding(pi) != 0 && test_done == 0) {
printf("Please remove port %d from forwarding "
"configuration.\n", pi);
continue;
}
if (port_is_bonding_slave(pi)) {
printf("Please remove port %d from bonded device.\n",
pi);
continue;
}
diag = rte_eth_dev_reset(pi);
if (diag == 0) {
port = &ports[pi];
port->need_reconfig = 1;
port->need_reconfig_queues = 1;
} else {
printf("Failed to reset port %d. diag=%d\n", pi, diag);
}
}
printf("Done\n");
}
static int
eth_dev_event_callback_register(void)
{
int ret;
/* register the device event callback */
ret = rte_dev_event_callback_register(NULL,
eth_dev_event_callback, NULL);
if (ret) {
printf("Failed to register device event callback\n");
return -1;
}
return 0;
}
static int
eth_dev_event_callback_unregister(void)
{
int ret;
/* unregister the device event callback */
ret = rte_dev_event_callback_unregister(NULL,
eth_dev_event_callback, NULL);
if (ret < 0) {
printf("Failed to unregister device event callback\n");
return -1;
}
return 0;
}
void
attach_port(char *identifier)
{
portid_t pi = 0;
unsigned int socket_id;
printf("Attaching a new port...\n");
if (identifier == NULL) {
printf("Invalid parameters are specified\n");
return;
}
if (rte_eth_dev_attach(identifier, &pi))
return;
socket_id = (unsigned)rte_eth_dev_socket_id(pi);
/* if socket_id is invalid, set to 0 */
if (check_socket_id(socket_id) < 0)
socket_id = 0;
reconfig(pi, socket_id);
rte_eth_promiscuous_enable(pi);
nb_ports = rte_eth_dev_count_avail();
ports[pi].port_status = RTE_PORT_STOPPED;
update_fwd_ports(pi);
printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
printf("Done\n");
}
void
detach_port(portid_t port_id)
{
char name[RTE_ETH_NAME_MAX_LEN];
printf("Detaching a port...\n");
if (!port_is_closed(port_id)) {
printf("Please close port first\n");
return;
}
if (ports[port_id].flow_list)
port_flow_flush(port_id);
if (rte_eth_dev_detach(port_id, name)) {
TESTPMD_LOG(ERR, "Failed to detach port %u\n", port_id);
return;
}
nb_ports = rte_eth_dev_count_avail();
update_fwd_ports(RTE_MAX_ETHPORTS);
printf("Port %u is detached. Now total ports is %d\n",
port_id, nb_ports);
printf("Done\n");
return;
}
void
pmd_test_exit(void)
{
portid_t pt_id;
int ret;
if (test_done == 0)
stop_packet_forwarding();
if (ports != NULL) {
no_link_check = 1;
RTE_ETH_FOREACH_DEV(pt_id) {
printf("\nShutting down port %d...\n", pt_id);
fflush(stdout);
stop_port(pt_id);
close_port(pt_id);
}
}
if (hot_plug) {
ret = rte_dev_event_monitor_stop();
if (ret)
RTE_LOG(ERR, EAL,
"fail to stop device event monitor.");
ret = eth_dev_event_callback_unregister();
if (ret)
RTE_LOG(ERR, EAL,
"fail to unregister all event callbacks.");
}
printf("\nBye...\n");
}
typedef void (*cmd_func_t)(void);
struct pmd_test_command {
const char *cmd_name;
cmd_func_t cmd_func;
};
#define PMD_TEST_CMD_NB (sizeof(pmd_test_menu) / sizeof(pmd_test_menu[0]))
/* Check the link status of all ports in up to 9s, and print them finally */
static void
check_all_ports_link_status(uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
portid_t portid;
uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
printf("Checking link statuses...\n");
fflush(stdout);
for (count = 0; count <= MAX_CHECK_TIME; count++) {
all_ports_up = 1;
RTE_ETH_FOREACH_DEV(portid) {
if ((port_mask & (1 << portid)) == 0)
continue;
memset(&link, 0, sizeof(link));
rte_eth_link_get_nowait(portid, &link);
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
printf(
"Port%d Link Up. speed %u Mbps- %s\n",
portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex\n"));
else
printf("Port %d Link Down\n", portid);
continue;
}
/* clear all_ports_up flag if any link down */
if (link.link_status == ETH_LINK_DOWN) {
all_ports_up = 0;
break;
}
}
/* after finally printing all link status, get out */
if (print_flag == 1)
break;
if (all_ports_up == 0) {
fflush(stdout);
rte_delay_ms(CHECK_INTERVAL);
}
/* set the print_flag if all ports up or timeout */
if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
print_flag = 1;
}
if (lsc_interrupt)
break;
}
}
static void
rmv_event_callback(void *arg)
{
int need_to_start = 0;
int org_no_link_check = no_link_check;
portid_t port_id = (intptr_t)arg;
RTE_ETH_VALID_PORTID_OR_RET(port_id);
if (!test_done && port_is_forwarding(port_id)) {
need_to_start = 1;
stop_packet_forwarding();
}
no_link_check = 1;
stop_port(port_id);
no_link_check = org_no_link_check;
close_port(port_id);
detach_port(port_id);
if (need_to_start)
start_packet_forwarding(0);
}
/* This function is used by the interrupt thread */
static int
eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param,
void *ret_param)
{
static const char * const event_desc[] = {
[RTE_ETH_EVENT_UNKNOWN] = "Unknown",
[RTE_ETH_EVENT_INTR_LSC] = "LSC",
[RTE_ETH_EVENT_QUEUE_STATE] = "Queue state",
[RTE_ETH_EVENT_INTR_RESET] = "Interrupt reset",
[RTE_ETH_EVENT_VF_MBOX] = "VF Mbox",
[RTE_ETH_EVENT_IPSEC] = "IPsec",
[RTE_ETH_EVENT_MACSEC] = "MACsec",
[RTE_ETH_EVENT_INTR_RMV] = "device removal",
[RTE_ETH_EVENT_NEW] = "device probed",
[RTE_ETH_EVENT_DESTROY] = "device released",
[RTE_ETH_EVENT_MAX] = NULL,
};
RTE_SET_USED(param);
RTE_SET_USED(ret_param);
if (type >= RTE_ETH_EVENT_MAX) {
fprintf(stderr, "\nPort %" PRIu8 ": %s called upon invalid event %d\n",
port_id, __func__, type);
fflush(stderr);
} else if (event_print_mask & (UINT32_C(1) << type)) {
printf("\nPort %" PRIu8 ": %s event\n", port_id,
event_desc[type]);
fflush(stdout);
}
if (port_id_is_invalid(port_id, DISABLED_WARN))
return 0;
switch (type) {
case RTE_ETH_EVENT_INTR_RMV:
if (rte_eal_alarm_set(100000,
rmv_event_callback, (void *)(intptr_t)port_id))
fprintf(stderr, "Could not set up deferred device removal\n");
break;
default:
break;
}
return 0;
}
/* This function is used by the interrupt thread */
static void
eth_dev_event_callback(char *device_name, enum rte_dev_event_type type,
__rte_unused void *arg)
{
if (type >= RTE_DEV_EVENT_MAX) {
fprintf(stderr, "%s called upon invalid event %d\n",
__func__, type);
fflush(stderr);
}
switch (type) {
case RTE_DEV_EVENT_REMOVE:
RTE_LOG(ERR, EAL, "The device: %s has been removed!\n",
device_name);
/* TODO: After finish failure handle, begin to stop
* packet forward, stop port, close port, detach port.
*/
break;
case RTE_DEV_EVENT_ADD:
RTE_LOG(ERR, EAL, "The device: %s has been added!\n",
device_name);
/* TODO: After finish kernel driver binding,
* begin to attach port.
*/
break;
default:
break;
}
}
static int
set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
{
uint16_t i;
int diag;
uint8_t mapping_found = 0;
for (i = 0; i < nb_tx_queue_stats_mappings; i++) {
if ((tx_queue_stats_mappings[i].port_id == port_id) &&
(tx_queue_stats_mappings[i].queue_id < nb_txq )) {
diag = rte_eth_dev_set_tx_queue_stats_mapping(port_id,
tx_queue_stats_mappings[i].queue_id,
tx_queue_stats_mappings[i].stats_counter_id);
if (diag != 0)
return diag;
mapping_found = 1;
}
}
if (mapping_found)
port->tx_queue_stats_mapping_enabled = 1;
return 0;
}
static int
set_rx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port)
{
uint16_t i;
int diag;
uint8_t mapping_found = 0;
for (i = 0; i < nb_rx_queue_stats_mappings; i++) {
if ((rx_queue_stats_mappings[i].port_id == port_id) &&
(rx_queue_stats_mappings[i].queue_id < nb_rxq )) {
diag = rte_eth_dev_set_rx_queue_stats_mapping(port_id,
rx_queue_stats_mappings[i].queue_id,
rx_queue_stats_mappings[i].stats_counter_id);
if (diag != 0)
return diag;
mapping_found = 1;
}
}
if (mapping_found)
port->rx_queue_stats_mapping_enabled = 1;
return 0;
}
static void
map_port_queue_stats_mapping_registers(portid_t pi, struct rte_port *port)
{
int diag = 0;
diag = set_tx_queue_stats_mapping_registers(pi, port);
if (diag != 0) {
if (diag == -ENOTSUP) {
port->tx_queue_stats_mapping_enabled = 0;
printf("TX queue stats mapping not supported port id=%d\n", pi);
}
else
rte_exit(EXIT_FAILURE,
"set_tx_queue_stats_mapping_registers "
"failed for port id=%d diag=%d\n",
pi, diag);
}
diag = set_rx_queue_stats_mapping_registers(pi, port);
if (diag != 0) {
if (diag == -ENOTSUP) {
port->rx_queue_stats_mapping_enabled = 0;
printf("RX queue stats mapping not supported port id=%d\n", pi);
}
else
rte_exit(EXIT_FAILURE,
"set_rx_queue_stats_mapping_registers "
"failed for port id=%d diag=%d\n",
pi, diag);
}
}
static void
rxtx_port_config(struct rte_port *port)
{
uint16_t qid;
for (qid = 0; qid < nb_rxq; qid++) {
port->rx_conf[qid] = port->dev_info.default_rxconf;
/* Check if any Rx parameters have been passed */
if (rx_pthresh != RTE_PMD_PARAM_UNSET)
port->rx_conf[qid].rx_thresh.pthresh = rx_pthresh;
if (rx_hthresh != RTE_PMD_PARAM_UNSET)
port->rx_conf[qid].rx_thresh.hthresh = rx_hthresh;
if (rx_wthresh != RTE_PMD_PARAM_UNSET)
port->rx_conf[qid].rx_thresh.wthresh = rx_wthresh;
if (rx_free_thresh != RTE_PMD_PARAM_UNSET)
port->rx_conf[qid].rx_free_thresh = rx_free_thresh;
if (rx_drop_en != RTE_PMD_PARAM_UNSET)
port->rx_conf[qid].rx_drop_en = rx_drop_en;
port->nb_rx_desc[qid] = nb_rxd;
}
for (qid = 0; qid < nb_txq; qid++) {
port->tx_conf[qid] = port->dev_info.default_txconf;
/* Check if any Tx parameters have been passed */
if (tx_pthresh != RTE_PMD_PARAM_UNSET)
port->tx_conf[qid].tx_thresh.pthresh = tx_pthresh;
if (tx_hthresh != RTE_PMD_PARAM_UNSET)
port->tx_conf[qid].tx_thresh.hthresh = tx_hthresh;
if (tx_wthresh != RTE_PMD_PARAM_UNSET)
port->tx_conf[qid].tx_thresh.wthresh = tx_wthresh;
if (tx_rs_thresh != RTE_PMD_PARAM_UNSET)
port->tx_conf[qid].tx_rs_thresh = tx_rs_thresh;
if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
port->tx_conf[qid].tx_free_thresh = tx_free_thresh;
port->nb_tx_desc[qid] = nb_txd;
}
}
void
init_port_config(void)
{
portid_t pid;
struct rte_port *port;
struct rte_eth_dev_info dev_info;
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
port->dev_conf.fdir_conf = fdir_conf;
if (nb_rxq > 1) {
rte_eth_dev_info_get(pid, &dev_info);
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
port->dev_conf.rx_adv_conf.rss_conf.rss_hf =
rss_hf & dev_info.flow_type_rss_offloads;
} else {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0;
}
if (port->dcb_flag == 0) {
if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0)
port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_RSS;
else
port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE;
}
rxtx_port_config(port);
rte_eth_macaddr_get(pid, &port->eth_addr);
map_port_queue_stats_mapping_registers(pid, port);
#if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
rte_pmd_ixgbe_bypass_init(pid);
#endif
if (lsc_interrupt &&
(rte_eth_devices[pid].data->dev_flags &
RTE_ETH_DEV_INTR_LSC))
port->dev_conf.intr_conf.lsc = 1;
if (rmv_interrupt &&
(rte_eth_devices[pid].data->dev_flags &
RTE_ETH_DEV_INTR_RMV))
port->dev_conf.intr_conf.rmv = 1;
#if defined RTE_LIBRTE_PMD_SOFTNIC && defined RTE_LIBRTE_SCHED
/* Detect softnic port */
if (!strcmp(port->dev_info.driver_name, "net_softnic")) {
port->softnic_enable = 1;
memset(&port->softport, 0, sizeof(struct softnic_port));
if (!strcmp(cur_fwd_eng->fwd_mode_name, "tm"))
port->softport.tm_flag = 1;
}
#endif
}
}
void set_port_slave_flag(portid_t slave_pid)
{
struct rte_port *port;
port = &ports[slave_pid];
port->slave_flag = 1;
}
void clear_port_slave_flag(portid_t slave_pid)
{
struct rte_port *port;
port = &ports[slave_pid];
port->slave_flag = 0;
}
uint8_t port_is_bonding_slave(portid_t slave_pid)
{
struct rte_port *port;
port = &ports[slave_pid];
if ((rte_eth_devices[slave_pid].data->dev_flags &
RTE_ETH_DEV_BONDED_SLAVE) || (port->slave_flag == 1))
return 1;
return 0;
}
const uint16_t vlan_tags[] = {
0, 1, 2, 3, 4, 5, 6, 7,
8, 9, 10, 11, 12, 13, 14, 15,
16, 17, 18, 19, 20, 21, 22, 23,
24, 25, 26, 27, 28, 29, 30, 31
};
static int
get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
enum dcb_mode_enable dcb_mode,
enum rte_eth_nb_tcs num_tcs,
uint8_t pfc_en)
{
uint8_t i;
/*
* Builds up the correct configuration for dcb+vt based on the vlan tags array
* given above, and the number of traffic classes available for use.
*/
if (dcb_mode == DCB_VT_ENABLED) {
struct rte_eth_vmdq_dcb_conf *vmdq_rx_conf =
&eth_conf->rx_adv_conf.vmdq_dcb_conf;
struct rte_eth_vmdq_dcb_tx_conf *vmdq_tx_conf =
&eth_conf->tx_adv_conf.vmdq_dcb_tx_conf;
/* VMDQ+DCB RX and TX configurations */
vmdq_rx_conf->enable_default_pool = 0;
vmdq_rx_conf->default_pool = 0;
vmdq_rx_conf->nb_queue_pools =
(num_tcs == ETH_4_TCS ? ETH_32_POOLS : ETH_16_POOLS);
vmdq_tx_conf->nb_queue_pools =
(num_tcs == ETH_4_TCS ? ETH_32_POOLS : ETH_16_POOLS);
vmdq_rx_conf->nb_pool_maps = vmdq_rx_conf->nb_queue_pools;
for (i = 0; i < vmdq_rx_conf->nb_pool_maps; i++) {
vmdq_rx_conf->pool_map[i].vlan_id = vlan_tags[i];
vmdq_rx_conf->pool_map[i].pools =
1 << (i % vmdq_rx_conf->nb_queue_pools);
}
for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
vmdq_rx_conf->dcb_tc[i] = i % num_tcs;
vmdq_tx_conf->dcb_tc[i] = i % num_tcs;
}
/* set DCB mode of RX and TX of multiple queues */
eth_conf->rxmode.mq_mode = ETH_MQ_RX_VMDQ_DCB;
eth_conf->txmode.mq_mode = ETH_MQ_TX_VMDQ_DCB;
} else {
struct rte_eth_dcb_rx_conf *rx_conf =
&eth_conf->rx_adv_conf.dcb_rx_conf;
struct rte_eth_dcb_tx_conf *tx_conf =
&eth_conf->tx_adv_conf.dcb_tx_conf;
rx_conf->nb_tcs = num_tcs;
tx_conf->nb_tcs = num_tcs;
for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
rx_conf->dcb_tc[i] = i % num_tcs;
tx_conf->dcb_tc[i] = i % num_tcs;
}
eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS;
eth_conf->rx_adv_conf.rss_conf.rss_hf = rss_hf;
eth_conf->txmode.mq_mode = ETH_MQ_TX_DCB;
}
if (pfc_en)
eth_conf->dcb_capability_en =
ETH_DCB_PG_SUPPORT | ETH_DCB_PFC_SUPPORT;
else
eth_conf->dcb_capability_en = ETH_DCB_PG_SUPPORT;
return 0;
}
int
init_port_dcb_config(portid_t pid,
enum dcb_mode_enable dcb_mode,
enum rte_eth_nb_tcs num_tcs,
uint8_t pfc_en)
{
struct rte_eth_conf port_conf;
struct rte_port *rte_port;
int retval;
uint16_t i;
rte_port = &ports[pid];
memset(&port_conf, 0, sizeof(struct rte_eth_conf));
/* Enter DCB configuration status */
dcb_config = 1;
port_conf.rxmode = rte_port->dev_conf.rxmode;
port_conf.txmode = rte_port->dev_conf.txmode;
/*set configuration of DCB in vt mode and DCB in non-vt mode*/
retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
if (retval < 0)
return retval;
port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
/**
* Write the configuration into the device.
* Set the numbers of RX & TX queues to 0, so
* the RX & TX queues will not be setup.
*/
rte_eth_dev_configure(pid, 0, 0, &port_conf);
rte_eth_dev_info_get(pid, &rte_port->dev_info);
/* If dev_info.vmdq_pool_base is greater than 0,
* the queue id of vmdq pools is started after pf queues.
*/
if (dcb_mode == DCB_VT_ENABLED &&
rte_port->dev_info.vmdq_pool_base > 0) {
printf("VMDQ_DCB multi-queue mode is nonsensical"
" for port %d.", pid);
return -1;
}
/* Assume the ports in testpmd have the same dcb capability
* and has the same number of rxq and txq in dcb mode
*/
if (dcb_mode == DCB_VT_ENABLED) {
if (rte_port->dev_info.max_vfs > 0) {
nb_rxq = rte_port->dev_info.nb_rx_queues;
nb_txq = rte_port->dev_info.nb_tx_queues;
} else {
nb_rxq = rte_port->dev_info.max_rx_queues;
nb_txq = rte_port->dev_info.max_tx_queues;
}
} else {
/*if vt is disabled, use all pf queues */
if (rte_port->dev_info.vmdq_pool_base == 0) {
nb_rxq = rte_port->dev_info.max_rx_queues;
nb_txq = rte_port->dev_info.max_tx_queues;
} else {
nb_rxq = (queueid_t)num_tcs;
nb_txq = (queueid_t)num_tcs;
}
}
rx_free_thresh = 64;
memcpy(&rte_port->dev_conf, &port_conf, sizeof(struct rte_eth_conf));
rxtx_port_config(rte_port);
/* VLAN filter */
rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER;
for (i = 0; i < RTE_DIM(vlan_tags); i++)
rx_vft_set(pid, vlan_tags[i], 1);
rte_eth_macaddr_get(pid, &rte_port->eth_addr);
map_port_queue_stats_mapping_registers(pid, rte_port);
rte_port->dcb_flag = 1;
return 0;
}
static void
init_port(void)
{
/* Configuration of Ethernet ports. */
ports = rte_zmalloc("testpmd: ports",
sizeof(struct rte_port) * RTE_MAX_ETHPORTS,
RTE_CACHE_LINE_SIZE);
if (ports == NULL) {
rte_exit(EXIT_FAILURE,
"rte_zmalloc(%d struct rte_port) failed\n",
RTE_MAX_ETHPORTS);
}
}
static void
force_quit(void)
{
pmd_test_exit();
prompt_exit();
}
static void
print_stats(void)
{
uint8_t i;
const char clr[] = { 27, '[', '2', 'J', '\0' };
const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' };
/* Clear screen and move to top left */
printf("%s%s", clr, top_left);
printf("\nPort statistics ====================================");
for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
nic_stats_display(fwd_ports_ids[i]);
}
static void
signal_handler(int signum)
{
if (signum == SIGINT || signum == SIGTERM) {
printf("\nSignal %d received, preparing to exit...\n",
signum);
#ifdef RTE_LIBRTE_PDUMP
/* uninitialize packet capture framework */
rte_pdump_uninit();
#endif
#ifdef RTE_LIBRTE_LATENCY_STATS
rte_latencystats_uninit();
#endif
force_quit();
/* Set flag to indicate the force termination. */
f_quit = 1;
/* exit with the expected status */
signal(signum, SIG_DFL);
kill(getpid(), signum);
}
}
int
main(int argc, char** argv)
{
int diag;
portid_t port_id;
int ret;
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
diag = rte_eal_init(argc, argv);
if (diag < 0)
rte_panic("Cannot init EAL\n");
testpmd_logtype = rte_log_register("testpmd");
if (testpmd_logtype < 0)
rte_panic("Cannot register log type");
rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG);
/* Bitrate/latency stats disabled by default */
#ifdef RTE_LIBRTE_BITRATE
bitrate_enabled = 0;
#endif
#ifdef RTE_LIBRTE_LATENCY_STATS
latencystats_enabled = 0;
#endif
/* on FreeBSD, mlockall() is disabled by default */
#ifdef RTE_EXEC_ENV_BSDAPP
do_mlockall = 0;
#else
do_mlockall = 1;
#endif
argc -= diag;
argv += diag;
if (argc > 1)
launch_args_parse(argc, argv);
if (do_mlockall && mlockall(MCL_CURRENT | MCL_FUTURE)) {
TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n",
strerror(errno));
}
#ifdef RTE_LIBRTE_PDUMP
/* initialize packet capture framework */
rte_pdump_init(NULL);
#endif
nb_ports = (portid_t) rte_eth_dev_count_avail();
if (nb_ports == 0)
TESTPMD_LOG(WARNING, "No probed ethernet devices\n");
/* allocate port structures, and init them */
init_port();
set_def_fwd_config();
if (nb_lcores == 0)
rte_panic("Empty set of forwarding logical cores - check the "
"core mask supplied in the command parameters\n");
if (tx_first && interactive)
rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
"interactive mode.\n");
if (tx_first && lsc_interrupt) {
printf("Warning: lsc_interrupt needs to be off when "
" using tx_first. Disabling.\n");
lsc_interrupt = 0;
}
if (!nb_rxq && !nb_txq)
printf("Warning: Either rx or tx queues should be non-zero\n");
if (nb_rxq > 1 && nb_rxq > nb_txq)
printf("Warning: nb_rxq=%d enables RSS configuration, "
"but nb_txq=%d will prevent to fully test it.\n",
nb_rxq, nb_txq);
init_config();
if (hot_plug) {
/* enable hot plug monitoring */
ret = rte_dev_event_monitor_start();
if (ret) {
rte_errno = EINVAL;
return -1;
}
eth_dev_event_callback_register();
}
if (start_port(RTE_PORT_ALL) != 0)
rte_exit(EXIT_FAILURE, "Start ports failed\n");
/* set all ports to promiscuous mode by default */
RTE_ETH_FOREACH_DEV(port_id)
rte_eth_promiscuous_enable(port_id);
/* Init metrics library */
rte_metrics_init(rte_socket_id());
#ifdef RTE_LIBRTE_LATENCY_STATS
if (latencystats_enabled != 0) {
int ret = rte_latencystats_init(1, NULL);
if (ret)
printf("Warning: latencystats init()"
" returned error %d\n", ret);
printf("Latencystats running on lcore %d\n",
latencystats_lcore_id);
}
#endif
/* Setup bitrate stats */
#ifdef RTE_LIBRTE_BITRATE
if (bitrate_enabled != 0) {
bitrate_data = rte_stats_bitrate_create();
if (bitrate_data == NULL)
rte_exit(EXIT_FAILURE,
"Could not allocate bitrate data.\n");
rte_stats_bitrate_reg(bitrate_data);
}
#endif
#ifdef RTE_LIBRTE_CMDLINE
if (strlen(cmdline_filename) != 0)
cmdline_read_from_file(cmdline_filename);
if (interactive == 1) {
if (auto_start) {
printf("Start automatic packet forwarding\n");
start_packet_forwarding(0);
}
prompt();
pmd_test_exit();
} else
#endif
{
char c;
int rc;
f_quit = 0;
printf("No commandline core given, start packet forwarding\n");
start_packet_forwarding(tx_first);
if (stats_period != 0) {
uint64_t prev_time = 0, cur_time, diff_time = 0;
uint64_t timer_period;
/* Convert to number of cycles */
timer_period = stats_period * rte_get_timer_hz();
while (f_quit == 0) {
cur_time = rte_get_timer_cycles();
diff_time += cur_time - prev_time;
if (diff_time >= timer_period) {
print_stats();
/* Reset the timer */
diff_time = 0;
}
/* Sleep to avoid unnecessary checks */
prev_time = cur_time;
sleep(1);
}
}
printf("Press enter to exit\n");
rc = read(0, &c, 1);
pmd_test_exit();
if (rc < 0)
return 1;
}
return 0;
}