numam-dpdk/app/test-crypto-perf/cperf_ops.c

778 lines
22 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2016-2017 Intel Corporation
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
*/
#include <rte_cryptodev.h>
#include "cperf_ops.h"
#include "cperf_test_vectors.h"
#ifdef RTE_LIBRTE_SECURITY
static int
cperf_set_ops_security(struct rte_crypto_op **ops,
uint32_t src_buf_offset __rte_unused,
uint32_t dst_buf_offset __rte_unused,
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options __rte_unused,
const struct cperf_test_vector *test_vector __rte_unused,
uint16_t iv_offset __rte_unused,
uint32_t *imix_idx __rte_unused)
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
struct rte_security_session *sec_sess =
(struct rte_security_session *)sess;
ops[i]->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
rte_security_attach_session(ops[i], sec_sess);
sym_op->m_src = (struct rte_mbuf *)((uint8_t *)ops[i] +
src_buf_offset);
sym_op->m_src->buf_len = options->segment_sz;
sym_op->m_src->data_len = options->test_buffer_size;
sym_op->m_src->pkt_len = sym_op->m_src->data_len;
/* Set dest mbuf to NULL if out-of-place (dst_buf_offset = 0) */
if (dst_buf_offset == 0)
sym_op->m_dst = NULL;
else
sym_op->m_dst = (struct rte_mbuf *)((uint8_t *)ops[i] +
dst_buf_offset);
}
return 0;
}
#endif
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
static int
cperf_set_ops_null_cipher(struct rte_crypto_op **ops,
uint32_t src_buf_offset, uint32_t dst_buf_offset,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector __rte_unused,
uint16_t iv_offset __rte_unused, uint32_t *imix_idx)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
ops[i]->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = (struct rte_mbuf *)((uint8_t *)ops[i] +
src_buf_offset);
/* Set dest mbuf to NULL if out-of-place (dst_buf_offset = 0) */
if (dst_buf_offset == 0)
sym_op->m_dst = NULL;
else
sym_op->m_dst = (struct rte_mbuf *)((uint8_t *)ops[i] +
dst_buf_offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* cipher parameters */
if (options->imix_distribution_count) {
sym_op->cipher.data.length =
options->imix_buffer_sizes[*imix_idx];
*imix_idx = (*imix_idx + 1) % options->pool_sz;
} else
sym_op->cipher.data.length = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->cipher.data.offset = 0;
}
return 0;
}
static int
cperf_set_ops_null_auth(struct rte_crypto_op **ops,
uint32_t src_buf_offset, uint32_t dst_buf_offset,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector __rte_unused,
uint16_t iv_offset __rte_unused, uint32_t *imix_idx)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
ops[i]->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = (struct rte_mbuf *)((uint8_t *)ops[i] +
src_buf_offset);
/* Set dest mbuf to NULL if out-of-place (dst_buf_offset = 0) */
if (dst_buf_offset == 0)
sym_op->m_dst = NULL;
else
sym_op->m_dst = (struct rte_mbuf *)((uint8_t *)ops[i] +
dst_buf_offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* auth parameters */
if (options->imix_distribution_count) {
sym_op->auth.data.length =
options->imix_buffer_sizes[*imix_idx];
*imix_idx = (*imix_idx + 1) % options->pool_sz;
} else
sym_op->auth.data.length = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->auth.data.offset = 0;
}
return 0;
}
static int
cperf_set_ops_cipher(struct rte_crypto_op **ops,
uint32_t src_buf_offset, uint32_t dst_buf_offset,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
uint16_t iv_offset, uint32_t *imix_idx)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
ops[i]->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = (struct rte_mbuf *)((uint8_t *)ops[i] +
src_buf_offset);
/* Set dest mbuf to NULL if out-of-place (dst_buf_offset = 0) */
if (dst_buf_offset == 0)
sym_op->m_dst = NULL;
else
sym_op->m_dst = (struct rte_mbuf *)((uint8_t *)ops[i] +
dst_buf_offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* cipher parameters */
if (options->imix_distribution_count) {
sym_op->cipher.data.length =
options->imix_buffer_sizes[*imix_idx];
*imix_idx = (*imix_idx + 1) % options->pool_sz;
} else
sym_op->cipher.data.length = options->test_buffer_size;
if (options->cipher_algo == RTE_CRYPTO_CIPHER_SNOW3G_UEA2 ||
options->cipher_algo == RTE_CRYPTO_CIPHER_KASUMI_F8 ||
options->cipher_algo == RTE_CRYPTO_CIPHER_ZUC_EEA3)
sym_op->cipher.data.length <<= 3;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->cipher.data.offset = 0;
}
if (options->test == CPERF_TEST_TYPE_VERIFY) {
for (i = 0; i < nb_ops; i++) {
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
uint8_t *, iv_offset);
memcpy(iv_ptr, test_vector->cipher_iv.data,
test_vector->cipher_iv.length);
}
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return 0;
}
static int
cperf_set_ops_auth(struct rte_crypto_op **ops,
uint32_t src_buf_offset, uint32_t dst_buf_offset,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
uint16_t iv_offset, uint32_t *imix_idx)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
ops[i]->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = (struct rte_mbuf *)((uint8_t *)ops[i] +
src_buf_offset);
/* Set dest mbuf to NULL if out-of-place (dst_buf_offset = 0) */
if (dst_buf_offset == 0)
sym_op->m_dst = NULL;
else
sym_op->m_dst = (struct rte_mbuf *)((uint8_t *)ops[i] +
dst_buf_offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (test_vector->auth_iv.length) {
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
uint8_t *,
iv_offset);
memcpy(iv_ptr, test_vector->auth_iv.data,
test_vector->auth_iv.length);
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* authentication parameters */
if (options->auth_op == RTE_CRYPTO_AUTH_OP_VERIFY) {
sym_op->auth.digest.data = test_vector->digest.data;
sym_op->auth.digest.phys_addr =
test_vector->digest.phys_addr;
} else {
uint32_t offset = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
struct rte_mbuf *buf, *tbuf;
if (options->out_of_place) {
buf = sym_op->m_dst;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
} else {
tbuf = sym_op->m_src;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
while ((tbuf->next != NULL) &&
(offset >= tbuf->data_len)) {
offset -= tbuf->data_len;
tbuf = tbuf->next;
}
/*
* If there is not enough room in segment,
* place the digest in the next segment
*/
if ((tbuf->data_len - offset) < options->digest_sz) {
tbuf = tbuf->next;
offset = 0;
}
buf = tbuf;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
sym_op->auth.digest.data = rte_pktmbuf_mtod_offset(buf,
uint8_t *, offset);
sym_op->auth.digest.phys_addr =
rte_pktmbuf_iova_offset(buf, offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
if (options->imix_distribution_count) {
sym_op->auth.data.length =
options->imix_buffer_sizes[*imix_idx];
*imix_idx = (*imix_idx + 1) % options->pool_sz;
} else
sym_op->auth.data.length = options->test_buffer_size;
if (options->auth_algo == RTE_CRYPTO_AUTH_SNOW3G_UIA2 ||
options->auth_algo == RTE_CRYPTO_AUTH_KASUMI_F9 ||
options->auth_algo == RTE_CRYPTO_AUTH_ZUC_EIA3)
sym_op->auth.data.length <<= 3;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->auth.data.offset = 0;
}
if (options->test == CPERF_TEST_TYPE_VERIFY) {
if (test_vector->auth_iv.length) {
for (i = 0; i < nb_ops; i++) {
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
uint8_t *, iv_offset);
memcpy(iv_ptr, test_vector->auth_iv.data,
test_vector->auth_iv.length);
}
}
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return 0;
}
static int
cperf_set_ops_cipher_auth(struct rte_crypto_op **ops,
uint32_t src_buf_offset, uint32_t dst_buf_offset,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
uint16_t iv_offset, uint32_t *imix_idx)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
ops[i]->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = (struct rte_mbuf *)((uint8_t *)ops[i] +
src_buf_offset);
/* Set dest mbuf to NULL if out-of-place (dst_buf_offset = 0) */
if (dst_buf_offset == 0)
sym_op->m_dst = NULL;
else
sym_op->m_dst = (struct rte_mbuf *)((uint8_t *)ops[i] +
dst_buf_offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* cipher parameters */
if (options->imix_distribution_count) {
sym_op->cipher.data.length =
options->imix_buffer_sizes[*imix_idx];
*imix_idx = (*imix_idx + 1) % options->pool_sz;
} else
sym_op->cipher.data.length = options->test_buffer_size;
if (options->cipher_algo == RTE_CRYPTO_CIPHER_SNOW3G_UEA2 ||
options->cipher_algo == RTE_CRYPTO_CIPHER_KASUMI_F8 ||
options->cipher_algo == RTE_CRYPTO_CIPHER_ZUC_EEA3)
sym_op->cipher.data.length <<= 3;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->cipher.data.offset = 0;
/* authentication parameters */
if (options->auth_op == RTE_CRYPTO_AUTH_OP_VERIFY) {
sym_op->auth.digest.data = test_vector->digest.data;
sym_op->auth.digest.phys_addr =
test_vector->digest.phys_addr;
} else {
uint32_t offset = options->test_buffer_size;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
struct rte_mbuf *buf, *tbuf;
if (options->out_of_place) {
buf = sym_op->m_dst;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
} else {
tbuf = sym_op->m_src;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
while ((tbuf->next != NULL) &&
(offset >= tbuf->data_len)) {
offset -= tbuf->data_len;
tbuf = tbuf->next;
}
/*
* If there is not enough room in segment,
* place the digest in the next segment
*/
if ((tbuf->data_len - offset) < options->digest_sz) {
tbuf = tbuf->next;
offset = 0;
}
buf = tbuf;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
sym_op->auth.digest.data = rte_pktmbuf_mtod_offset(buf,
uint8_t *, offset);
sym_op->auth.digest.phys_addr =
rte_pktmbuf_iova_offset(buf, offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
if (options->imix_distribution_count) {
sym_op->auth.data.length =
options->imix_buffer_sizes[*imix_idx];
*imix_idx = (*imix_idx + 1) % options->pool_sz;
} else
sym_op->auth.data.length = options->test_buffer_size;
if (options->auth_algo == RTE_CRYPTO_AUTH_SNOW3G_UIA2 ||
options->auth_algo == RTE_CRYPTO_AUTH_KASUMI_F9 ||
options->auth_algo == RTE_CRYPTO_AUTH_ZUC_EIA3)
sym_op->auth.data.length <<= 3;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->auth.data.offset = 0;
}
if (options->test == CPERF_TEST_TYPE_VERIFY) {
for (i = 0; i < nb_ops; i++) {
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
uint8_t *, iv_offset);
memcpy(iv_ptr, test_vector->cipher_iv.data,
test_vector->cipher_iv.length);
if (test_vector->auth_iv.length) {
/*
* Copy IV after the crypto operation and
* the cipher IV
*/
iv_ptr += test_vector->cipher_iv.length;
memcpy(iv_ptr, test_vector->auth_iv.data,
test_vector->auth_iv.length);
}
}
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return 0;
}
static int
cperf_set_ops_aead(struct rte_crypto_op **ops,
uint32_t src_buf_offset, uint32_t dst_buf_offset,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint16_t nb_ops, struct rte_cryptodev_sym_session *sess,
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
uint16_t iv_offset, uint32_t *imix_idx)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
uint16_t i;
/* AAD is placed after the IV */
uint16_t aad_offset = iv_offset +
RTE_ALIGN_CEIL(test_vector->aead_iv.length, 16);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
for (i = 0; i < nb_ops; i++) {
struct rte_crypto_sym_op *sym_op = ops[i]->sym;
ops[i]->status = RTE_CRYPTO_OP_STATUS_NOT_PROCESSED;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
rte_crypto_op_attach_sym_session(ops[i], sess);
sym_op->m_src = (struct rte_mbuf *)((uint8_t *)ops[i] +
src_buf_offset);
/* Set dest mbuf to NULL if out-of-place (dst_buf_offset = 0) */
if (dst_buf_offset == 0)
sym_op->m_dst = NULL;
else
sym_op->m_dst = (struct rte_mbuf *)((uint8_t *)ops[i] +
dst_buf_offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* AEAD parameters */
if (options->imix_distribution_count) {
sym_op->aead.data.length =
options->imix_buffer_sizes[*imix_idx];
*imix_idx = (*imix_idx + 1) % options->pool_sz;
} else
sym_op->aead.data.length = options->test_buffer_size;
sym_op->aead.data.offset = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
sym_op->aead.aad.data = rte_crypto_op_ctod_offset(ops[i],
uint8_t *, aad_offset);
sym_op->aead.aad.phys_addr = rte_crypto_op_ctophys_offset(ops[i],
aad_offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
if (options->aead_op == RTE_CRYPTO_AEAD_OP_DECRYPT) {
sym_op->aead.digest.data = test_vector->digest.data;
sym_op->aead.digest.phys_addr =
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
test_vector->digest.phys_addr;
} else {
uint32_t offset = sym_op->aead.data.length +
sym_op->aead.data.offset;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
struct rte_mbuf *buf, *tbuf;
if (options->out_of_place) {
buf = sym_op->m_dst;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
} else {
tbuf = sym_op->m_src;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
while ((tbuf->next != NULL) &&
(offset >= tbuf->data_len)) {
offset -= tbuf->data_len;
tbuf = tbuf->next;
}
/*
* If there is not enough room in segment,
* place the digest in the next segment
*/
if ((tbuf->data_len - offset) < options->digest_sz) {
tbuf = tbuf->next;
offset = 0;
}
buf = tbuf;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
sym_op->aead.digest.data = rte_pktmbuf_mtod_offset(buf,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
uint8_t *, offset);
sym_op->aead.digest.phys_addr =
rte_pktmbuf_iova_offset(buf, offset);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
}
if (options->test == CPERF_TEST_TYPE_VERIFY) {
for (i = 0; i < nb_ops; i++) {
uint8_t *iv_ptr = rte_crypto_op_ctod_offset(ops[i],
uint8_t *, iv_offset);
/*
* If doing AES-CCM, nonce is copied one byte
* after the start of IV field, and AAD is copied
* 18 bytes after the start of the AAD field.
*/
if (options->aead_algo == RTE_CRYPTO_AEAD_AES_CCM) {
memcpy(iv_ptr + 1, test_vector->aead_iv.data,
test_vector->aead_iv.length);
memcpy(ops[i]->sym->aead.aad.data + 18,
test_vector->aad.data,
test_vector->aad.length);
} else {
memcpy(iv_ptr, test_vector->aead_iv.data,
test_vector->aead_iv.length);
memcpy(ops[i]->sym->aead.aad.data,
test_vector->aad.data,
test_vector->aad.length);
}
}
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return 0;
}
static struct rte_cryptodev_sym_session *
cperf_create_session(struct rte_mempool *sess_mp,
struct rte_mempool *priv_mp,
uint8_t dev_id,
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
const struct cperf_options *options,
const struct cperf_test_vector *test_vector,
uint16_t iv_offset)
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
{
struct rte_crypto_sym_xform cipher_xform;
struct rte_crypto_sym_xform auth_xform;
struct rte_crypto_sym_xform aead_xform;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
struct rte_cryptodev_sym_session *sess = NULL;
#ifdef RTE_LIBRTE_SECURITY
/*
* security only
*/
if (options->op_type == CPERF_PDCP) {
/* Setup Cipher Parameters */
cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
cipher_xform.next = NULL;
cipher_xform.cipher.algo = options->cipher_algo;
cipher_xform.cipher.op = options->cipher_op;
cipher_xform.cipher.iv.offset = iv_offset;
/* cipher different than null */
if (options->cipher_algo != RTE_CRYPTO_CIPHER_NULL) {
cipher_xform.cipher.key.data = test_vector->cipher_key.data;
cipher_xform.cipher.key.length = test_vector->cipher_key.length;
cipher_xform.cipher.iv.length = test_vector->cipher_iv.length;
} else {
cipher_xform.cipher.key.data = NULL;
cipher_xform.cipher.key.length = 0;
cipher_xform.cipher.iv.length = 0;
}
/* Setup Auth Parameters */
if (options->auth_algo != 0) {
auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
auth_xform.next = NULL;
auth_xform.auth.algo = options->auth_algo;
auth_xform.auth.op = options->auth_op;
auth_xform.auth.iv.offset = iv_offset +
cipher_xform.cipher.iv.length;
/* auth different than null */
if (options->auth_algo != RTE_CRYPTO_AUTH_NULL) {
auth_xform.auth.digest_length = options->digest_sz;
auth_xform.auth.key.length = test_vector->auth_key.length;
auth_xform.auth.key.data = test_vector->auth_key.data;
auth_xform.auth.iv.length = test_vector->auth_iv.length;
} else {
auth_xform.auth.digest_length = 0;
auth_xform.auth.key.length = 0;
auth_xform.auth.key.data = NULL;
auth_xform.auth.iv.length = 0;
}
cipher_xform.next = &auth_xform;
} else {
cipher_xform.next = NULL;
}
struct rte_security_session_conf sess_conf = {
.action_type = RTE_SECURITY_ACTION_TYPE_LOOKASIDE_PROTOCOL,
.protocol = RTE_SECURITY_PROTOCOL_PDCP,
{.pdcp = {
.bearer = 0x16,
.domain = options->pdcp_domain,
.pkt_dir = 0,
.sn_size = options->pdcp_sn_sz,
.hfn = 0x1,
.hfn_threshold = 0x70C0A,
} },
.crypto_xform = &cipher_xform
};
struct rte_security_ctx *ctx = (struct rte_security_ctx *)
rte_cryptodev_get_sec_ctx(dev_id);
/* Create security session */
return (void *)rte_security_session_create(ctx,
&sess_conf, sess_mp);
}
#endif
sess = rte_cryptodev_sym_session_create(sess_mp);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/*
* cipher only
*/
if (options->op_type == CPERF_CIPHER_ONLY) {
cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
cipher_xform.next = NULL;
cipher_xform.cipher.algo = options->cipher_algo;
cipher_xform.cipher.op = options->cipher_op;
cipher_xform.cipher.iv.offset = iv_offset;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* cipher different than null */
if (options->cipher_algo != RTE_CRYPTO_CIPHER_NULL) {
cipher_xform.cipher.key.data =
test_vector->cipher_key.data;
cipher_xform.cipher.key.length =
test_vector->cipher_key.length;
cipher_xform.cipher.iv.length =
test_vector->cipher_iv.length;
} else {
cipher_xform.cipher.key.data = NULL;
cipher_xform.cipher.key.length = 0;
cipher_xform.cipher.iv.length = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
/* create crypto session */
rte_cryptodev_sym_session_init(dev_id, sess, &cipher_xform,
priv_mp);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/*
* auth only
*/
} else if (options->op_type == CPERF_AUTH_ONLY) {
auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
auth_xform.next = NULL;
auth_xform.auth.algo = options->auth_algo;
auth_xform.auth.op = options->auth_op;
auth_xform.auth.iv.offset = iv_offset;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* auth different than null */
if (options->auth_algo != RTE_CRYPTO_AUTH_NULL) {
auth_xform.auth.digest_length =
options->digest_sz;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
auth_xform.auth.key.length =
test_vector->auth_key.length;
auth_xform.auth.key.data = test_vector->auth_key.data;
auth_xform.auth.iv.length =
test_vector->auth_iv.length;
} else {
auth_xform.auth.digest_length = 0;
auth_xform.auth.key.length = 0;
auth_xform.auth.key.data = NULL;
auth_xform.auth.iv.length = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
/* create crypto session */
rte_cryptodev_sym_session_init(dev_id, sess, &auth_xform,
priv_mp);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/*
* cipher and auth
*/
} else if (options->op_type == CPERF_CIPHER_THEN_AUTH
|| options->op_type == CPERF_AUTH_THEN_CIPHER) {
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/*
* cipher
*/
cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
cipher_xform.next = NULL;
cipher_xform.cipher.algo = options->cipher_algo;
cipher_xform.cipher.op = options->cipher_op;
cipher_xform.cipher.iv.offset = iv_offset;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* cipher different than null */
if (options->cipher_algo != RTE_CRYPTO_CIPHER_NULL) {
cipher_xform.cipher.key.data =
test_vector->cipher_key.data;
cipher_xform.cipher.key.length =
test_vector->cipher_key.length;
cipher_xform.cipher.iv.length =
test_vector->cipher_iv.length;
} else {
cipher_xform.cipher.key.data = NULL;
cipher_xform.cipher.key.length = 0;
cipher_xform.cipher.iv.length = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
/*
* auth
*/
auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
auth_xform.next = NULL;
auth_xform.auth.algo = options->auth_algo;
auth_xform.auth.op = options->auth_op;
auth_xform.auth.iv.offset = iv_offset +
cipher_xform.cipher.iv.length;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
/* auth different than null */
if (options->auth_algo != RTE_CRYPTO_AUTH_NULL) {
auth_xform.auth.digest_length = options->digest_sz;
auth_xform.auth.iv.length = test_vector->auth_iv.length;
auth_xform.auth.key.length =
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
test_vector->auth_key.length;
auth_xform.auth.key.data =
test_vector->auth_key.data;
} else {
auth_xform.auth.digest_length = 0;
auth_xform.auth.key.length = 0;
auth_xform.auth.key.data = NULL;
auth_xform.auth.iv.length = 0;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
/* cipher then auth */
if (options->op_type == CPERF_CIPHER_THEN_AUTH) {
cipher_xform.next = &auth_xform;
/* create crypto session */
rte_cryptodev_sym_session_init(dev_id,
sess, &cipher_xform, priv_mp);
} else { /* auth then cipher */
auth_xform.next = &cipher_xform;
/* create crypto session */
rte_cryptodev_sym_session_init(dev_id,
sess, &auth_xform, priv_mp);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
} else { /* options->op_type == CPERF_AEAD */
aead_xform.type = RTE_CRYPTO_SYM_XFORM_AEAD;
aead_xform.next = NULL;
aead_xform.aead.algo = options->aead_algo;
aead_xform.aead.op = options->aead_op;
aead_xform.aead.iv.offset = iv_offset;
aead_xform.aead.key.data =
test_vector->aead_key.data;
aead_xform.aead.key.length =
test_vector->aead_key.length;
aead_xform.aead.iv.length = test_vector->aead_iv.length;
aead_xform.aead.digest_length = options->digest_sz;
aead_xform.aead.aad_length =
options->aead_aad_sz;
/* Create crypto session */
rte_cryptodev_sym_session_init(dev_id,
sess, &aead_xform, priv_mp);
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
}
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return sess;
}
int
cperf_get_op_functions(const struct cperf_options *options,
struct cperf_op_fns *op_fns)
{
memset(op_fns, 0, sizeof(struct cperf_op_fns));
op_fns->sess_create = cperf_create_session;
if (options->op_type == CPERF_AEAD) {
op_fns->populate_ops = cperf_set_ops_aead;
return 0;
}
if (options->op_type == CPERF_AUTH_THEN_CIPHER
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
|| options->op_type == CPERF_CIPHER_THEN_AUTH) {
op_fns->populate_ops = cperf_set_ops_cipher_auth;
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return 0;
}
if (options->op_type == CPERF_AUTH_ONLY) {
if (options->auth_algo == RTE_CRYPTO_AUTH_NULL)
op_fns->populate_ops = cperf_set_ops_null_auth;
else
op_fns->populate_ops = cperf_set_ops_auth;
return 0;
}
if (options->op_type == CPERF_CIPHER_ONLY) {
if (options->cipher_algo == RTE_CRYPTO_CIPHER_NULL)
op_fns->populate_ops = cperf_set_ops_null_cipher;
else
op_fns->populate_ops = cperf_set_ops_cipher;
return 0;
}
#ifdef RTE_LIBRTE_SECURITY
if (options->op_type == CPERF_PDCP) {
op_fns->populate_ops = cperf_set_ops_security;
return 0;
}
#endif
app/crypto-perf: introduce performance test application This patchset introduce new application which allows measuring performance parameters of PMDs available in crypto tree. The goal of this application is to replace existing performance tests in app/test. Parameters available are: throughput (--ptest throughput) and latency (--ptest latency). User can use multiply cores to run tests on but only one type of crypto PMD can be measured during single application execution. Cipher parameters, type of device, type of operation and chain mode have to be specified in the command line as application parameters. These parameters are checked using device capabilities structure. Couple of new library functions in librte_cryptodev are introduced for application use. To build the application a CONFIG_RTE_APP_CRYPTO_PERF flag has to be set (it is set by default). Example of usage: -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 --total-ops 10000000 --burst-sz 32 --buffer-sz 64 Signed-off-by: Declan Doherty <declan.doherty@intel.com> Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com> Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com> Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
2017-01-25 16:27:33 +00:00
return -1;
}