2017-12-19 15:49:03 +00:00
|
|
|
/* SPDX-License-Identifier: BSD-3-Clause
|
2018-04-05 16:01:30 +00:00
|
|
|
* Copyright(c) 2010-2018 Intel Corporation
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
*/
|
|
|
|
|
2018-02-05 12:16:00 +00:00
|
|
|
/* Security model
|
|
|
|
* --------------
|
|
|
|
* The vhost-user protocol connection is an external interface, so it must be
|
|
|
|
* robust against invalid inputs.
|
|
|
|
*
|
|
|
|
* This is important because the vhost-user master is only one step removed
|
|
|
|
* from the guest. Malicious guests that have escaped will then launch further
|
|
|
|
* attacks from the vhost-user master.
|
|
|
|
*
|
|
|
|
* Even in deployments where guests are trusted, a bug in the vhost-user master
|
|
|
|
* can still cause invalid messages to be sent. Such messages must not
|
|
|
|
* compromise the stability of the DPDK application by causing crashes, memory
|
|
|
|
* corruption, or other problematic behavior.
|
|
|
|
*
|
|
|
|
* Do not assume received VhostUserMsg fields contain sensible values!
|
|
|
|
*/
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
#include <stdint.h>
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
|
|
|
#include <unistd.h>
|
|
|
|
#include <sys/mman.h>
|
|
|
|
#include <sys/types.h>
|
|
|
|
#include <sys/stat.h>
|
|
|
|
#include <assert.h>
|
|
|
|
#ifdef RTE_LIBRTE_VHOST_NUMA
|
|
|
|
#include <numaif.h>
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#include <rte_common.h>
|
|
|
|
#include <rte_malloc.h>
|
|
|
|
#include <rte_log.h>
|
|
|
|
|
2017-10-05 08:36:18 +00:00
|
|
|
#include "iotlb.h"
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
#include "vhost.h"
|
|
|
|
#include "vhost_user.h"
|
|
|
|
|
2017-03-12 16:33:59 +00:00
|
|
|
#define VIRTIO_MIN_MTU 68
|
|
|
|
#define VIRTIO_MAX_MTU 65535
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
static const char *vhost_message_str[VHOST_USER_MAX] = {
|
|
|
|
[VHOST_USER_NONE] = "VHOST_USER_NONE",
|
|
|
|
[VHOST_USER_GET_FEATURES] = "VHOST_USER_GET_FEATURES",
|
|
|
|
[VHOST_USER_SET_FEATURES] = "VHOST_USER_SET_FEATURES",
|
|
|
|
[VHOST_USER_SET_OWNER] = "VHOST_USER_SET_OWNER",
|
|
|
|
[VHOST_USER_RESET_OWNER] = "VHOST_USER_RESET_OWNER",
|
|
|
|
[VHOST_USER_SET_MEM_TABLE] = "VHOST_USER_SET_MEM_TABLE",
|
|
|
|
[VHOST_USER_SET_LOG_BASE] = "VHOST_USER_SET_LOG_BASE",
|
|
|
|
[VHOST_USER_SET_LOG_FD] = "VHOST_USER_SET_LOG_FD",
|
|
|
|
[VHOST_USER_SET_VRING_NUM] = "VHOST_USER_SET_VRING_NUM",
|
|
|
|
[VHOST_USER_SET_VRING_ADDR] = "VHOST_USER_SET_VRING_ADDR",
|
|
|
|
[VHOST_USER_SET_VRING_BASE] = "VHOST_USER_SET_VRING_BASE",
|
|
|
|
[VHOST_USER_GET_VRING_BASE] = "VHOST_USER_GET_VRING_BASE",
|
|
|
|
[VHOST_USER_SET_VRING_KICK] = "VHOST_USER_SET_VRING_KICK",
|
|
|
|
[VHOST_USER_SET_VRING_CALL] = "VHOST_USER_SET_VRING_CALL",
|
|
|
|
[VHOST_USER_SET_VRING_ERR] = "VHOST_USER_SET_VRING_ERR",
|
|
|
|
[VHOST_USER_GET_PROTOCOL_FEATURES] = "VHOST_USER_GET_PROTOCOL_FEATURES",
|
|
|
|
[VHOST_USER_SET_PROTOCOL_FEATURES] = "VHOST_USER_SET_PROTOCOL_FEATURES",
|
|
|
|
[VHOST_USER_GET_QUEUE_NUM] = "VHOST_USER_GET_QUEUE_NUM",
|
|
|
|
[VHOST_USER_SET_VRING_ENABLE] = "VHOST_USER_SET_VRING_ENABLE",
|
|
|
|
[VHOST_USER_SEND_RARP] = "VHOST_USER_SEND_RARP",
|
2017-03-12 16:33:59 +00:00
|
|
|
[VHOST_USER_NET_SET_MTU] = "VHOST_USER_NET_SET_MTU",
|
2017-10-05 08:36:12 +00:00
|
|
|
[VHOST_USER_SET_SLAVE_REQ_FD] = "VHOST_USER_SET_SLAVE_REQ_FD",
|
2017-10-05 08:36:18 +00:00
|
|
|
[VHOST_USER_IOTLB_MSG] = "VHOST_USER_IOTLB_MSG",
|
2018-04-05 16:01:32 +00:00
|
|
|
[VHOST_USER_CRYPTO_CREATE_SESS] = "VHOST_USER_CRYPTO_CREATE_SESS",
|
|
|
|
[VHOST_USER_CRYPTO_CLOSE_SESS] = "VHOST_USER_CRYPTO_CLOSE_SESS",
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static uint64_t
|
|
|
|
get_blk_size(int fd)
|
|
|
|
{
|
|
|
|
struct stat stat;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = fstat(fd, &stat);
|
|
|
|
return ret == -1 ? (uint64_t)-1 : (uint64_t)stat.st_blksize;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
free_mem_region(struct virtio_net *dev)
|
|
|
|
{
|
2016-10-09 07:27:54 +00:00
|
|
|
uint32_t i;
|
2017-04-01 07:22:43 +00:00
|
|
|
struct rte_vhost_mem_region *reg;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
if (!dev || !dev->mem)
|
|
|
|
return;
|
|
|
|
|
2016-10-09 07:27:54 +00:00
|
|
|
for (i = 0; i < dev->mem->nregions; i++) {
|
|
|
|
reg = &dev->mem->regions[i];
|
|
|
|
if (reg->host_user_addr) {
|
|
|
|
munmap(reg->mmap_addr, reg->mmap_size);
|
|
|
|
close(reg->fd);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
vhost_backend_cleanup(struct virtio_net *dev)
|
|
|
|
{
|
|
|
|
if (dev->mem) {
|
|
|
|
free_mem_region(dev);
|
2016-10-09 07:27:54 +00:00
|
|
|
rte_free(dev->mem);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
dev->mem = NULL;
|
|
|
|
}
|
2017-05-26 11:59:14 +00:00
|
|
|
|
|
|
|
free(dev->guest_pages);
|
|
|
|
dev->guest_pages = NULL;
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
if (dev->log_addr) {
|
|
|
|
munmap((void *)(uintptr_t)dev->log_addr, dev->log_size);
|
|
|
|
dev->log_addr = 0;
|
|
|
|
}
|
2017-10-05 08:36:12 +00:00
|
|
|
|
|
|
|
if (dev->slave_req_fd >= 0) {
|
|
|
|
close(dev->slave_req_fd);
|
|
|
|
dev->slave_req_fd = -1;
|
|
|
|
}
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This function just returns success at the moment unless
|
|
|
|
* the device hasn't been initialised.
|
|
|
|
*/
|
|
|
|
static int
|
2016-08-18 08:48:42 +00:00
|
|
|
vhost_user_set_owner(void)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2016-08-18 08:48:42 +00:00
|
|
|
vhost_user_reset_owner(struct virtio_net *dev)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2018-06-13 11:54:18 +00:00
|
|
|
vhost_destroy_device_notify(dev);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
cleanup_device(dev, 0);
|
|
|
|
reset_device(dev);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The features that we support are requested.
|
|
|
|
*/
|
2016-08-18 08:48:43 +00:00
|
|
|
static uint64_t
|
2017-04-01 07:22:41 +00:00
|
|
|
vhost_user_get_features(struct virtio_net *dev)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2017-04-01 07:22:41 +00:00
|
|
|
uint64_t features = 0;
|
|
|
|
|
|
|
|
rte_vhost_driver_get_features(dev->ifname, &features);
|
|
|
|
return features;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
2018-04-02 11:46:55 +00:00
|
|
|
/*
|
|
|
|
* The queue number that we support are requested.
|
|
|
|
*/
|
|
|
|
static uint32_t
|
|
|
|
vhost_user_get_queue_num(struct virtio_net *dev)
|
|
|
|
{
|
|
|
|
uint32_t queue_num = 0;
|
|
|
|
|
|
|
|
rte_vhost_driver_get_queue_num(dev->ifname, &queue_num);
|
|
|
|
return queue_num;
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
/*
|
|
|
|
* We receive the negotiated features supported by us and the virtio device.
|
|
|
|
*/
|
|
|
|
static int
|
2016-08-18 08:48:43 +00:00
|
|
|
vhost_user_set_features(struct virtio_net *dev, uint64_t features)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2017-04-01 07:22:41 +00:00
|
|
|
uint64_t vhost_features = 0;
|
2018-04-02 11:46:55 +00:00
|
|
|
struct rte_vdpa_device *vdpa_dev;
|
|
|
|
int did = -1;
|
2017-04-01 07:22:41 +00:00
|
|
|
|
|
|
|
rte_vhost_driver_get_features(dev->ifname, &vhost_features);
|
2017-06-16 14:32:05 +00:00
|
|
|
if (features & ~vhost_features) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"(%d) received invalid negotiated features.\n",
|
|
|
|
dev->vid);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
return -1;
|
2017-06-16 14:32:05 +00:00
|
|
|
}
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2017-12-13 08:51:06 +00:00
|
|
|
if (dev->flags & VIRTIO_DEV_RUNNING) {
|
|
|
|
if (dev->features == features)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Error out if master tries to change features while device is
|
|
|
|
* in running state. The exception being VHOST_F_LOG_ALL, which
|
|
|
|
* is enabled when the live-migration starts.
|
|
|
|
*/
|
|
|
|
if ((dev->features ^ features) & ~(1ULL << VHOST_F_LOG_ALL)) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"(%d) features changed while device is running.\n",
|
|
|
|
dev->vid);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2017-04-01 07:22:54 +00:00
|
|
|
if (dev->notify_ops->features_changed)
|
|
|
|
dev->notify_ops->features_changed(dev->vid, features);
|
|
|
|
}
|
|
|
|
|
2016-08-18 08:48:43 +00:00
|
|
|
dev->features = features;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
if (dev->features &
|
|
|
|
((1 << VIRTIO_NET_F_MRG_RXBUF) | (1ULL << VIRTIO_F_VERSION_1))) {
|
|
|
|
dev->vhost_hlen = sizeof(struct virtio_net_hdr_mrg_rxbuf);
|
|
|
|
} else {
|
|
|
|
dev->vhost_hlen = sizeof(struct virtio_net_hdr);
|
|
|
|
}
|
2018-02-09 17:24:00 +00:00
|
|
|
VHOST_LOG_DEBUG(VHOST_CONFIG,
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
"(%d) mergeable RX buffers %s, virtio 1 %s\n",
|
|
|
|
dev->vid,
|
|
|
|
(dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF)) ? "on" : "off",
|
|
|
|
(dev->features & (1ULL << VIRTIO_F_VERSION_1)) ? "on" : "off");
|
|
|
|
|
2018-01-31 17:46:51 +00:00
|
|
|
if ((dev->flags & VIRTIO_DEV_BUILTIN_VIRTIO_NET) &&
|
|
|
|
!(dev->features & (1ULL << VIRTIO_NET_F_MQ))) {
|
2017-12-13 08:51:09 +00:00
|
|
|
/*
|
|
|
|
* Remove all but first queue pair if MQ hasn't been
|
|
|
|
* negotiated. This is safe because the device is not
|
|
|
|
* running at this stage.
|
|
|
|
*/
|
|
|
|
while (dev->nr_vring > 2) {
|
|
|
|
struct vhost_virtqueue *vq;
|
|
|
|
|
|
|
|
vq = dev->virtqueue[--dev->nr_vring];
|
|
|
|
if (!vq)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
dev->virtqueue[dev->nr_vring] = NULL;
|
|
|
|
cleanup_vq(vq, 1);
|
2018-07-06 07:07:16 +00:00
|
|
|
free_vq(dev, vq);
|
2017-12-13 08:51:09 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-04-25 02:18:27 +00:00
|
|
|
did = dev->vdpa_dev_id;
|
|
|
|
vdpa_dev = rte_vdpa_get_device(did);
|
|
|
|
if (vdpa_dev && vdpa_dev->ops->set_features)
|
|
|
|
vdpa_dev->ops->set_features(dev->vid);
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The virtio device sends us the size of the descriptor ring.
|
|
|
|
*/
|
|
|
|
static int
|
2016-08-18 08:48:42 +00:00
|
|
|
vhost_user_set_vring_num(struct virtio_net *dev,
|
2017-05-26 11:59:15 +00:00
|
|
|
VhostUserMsg *msg)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2017-05-26 11:59:15 +00:00
|
|
|
struct vhost_virtqueue *vq = dev->virtqueue[msg->payload.state.index];
|
vhost: add dequeue zero copy
The basic idea of dequeue zero copy is, instead of copying data from
the desc buf, here we let the mbuf reference the desc buf addr directly.
Doing so, however, has one major issue: we can't update the used ring
at the end of rte_vhost_dequeue_burst. Because we don't do the copy
here, an update of the used ring would let the driver to reclaim the
desc buf. As a result, DPDK might reference a stale memory region.
To update the used ring properly, this patch does several tricks:
- when mbuf references a desc buf, refcnt is added by 1.
This is to pin lock the mbuf, so that a mbuf free from the DPDK
won't actually free it, instead, refcnt is subtracted by 1.
- We chain all those mbuf together (by tailq)
And we check it every time on the rte_vhost_dequeue_burst entrance,
to see if the mbuf is freed (when refcnt equals to 1). If that
happens, it means we are the last user of this mbuf and we are
safe to update the used ring.
- "struct zcopy_mbuf" is introduced, to associate an mbuf with the
right desc idx.
Dequeue zero copy is introduced for performance reason, and some rough
tests show about 50% perfomance boost for packet size 1500B. For small
packets, (e.g. 64B), it actually slows a bit down (well, it could up to
15%). That is expected because this patch introduces some extra works,
and it outweighs the benefit from saving few bytes copy.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
2016-10-09 07:27:57 +00:00
|
|
|
|
2017-05-26 11:59:15 +00:00
|
|
|
vq->size = msg->payload.state.num;
|
vhost: add dequeue zero copy
The basic idea of dequeue zero copy is, instead of copying data from
the desc buf, here we let the mbuf reference the desc buf addr directly.
Doing so, however, has one major issue: we can't update the used ring
at the end of rte_vhost_dequeue_burst. Because we don't do the copy
here, an update of the used ring would let the driver to reclaim the
desc buf. As a result, DPDK might reference a stale memory region.
To update the used ring properly, this patch does several tricks:
- when mbuf references a desc buf, refcnt is added by 1.
This is to pin lock the mbuf, so that a mbuf free from the DPDK
won't actually free it, instead, refcnt is subtracted by 1.
- We chain all those mbuf together (by tailq)
And we check it every time on the rte_vhost_dequeue_burst entrance,
to see if the mbuf is freed (when refcnt equals to 1). If that
happens, it means we are the last user of this mbuf and we are
safe to update the used ring.
- "struct zcopy_mbuf" is introduced, to associate an mbuf with the
right desc idx.
Dequeue zero copy is introduced for performance reason, and some rough
tests show about 50% perfomance boost for packet size 1500B. For small
packets, (e.g. 64B), it actually slows a bit down (well, it could up to
15%). That is expected because this patch introduces some extra works,
and it outweighs the benefit from saving few bytes copy.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
2016-10-09 07:27:57 +00:00
|
|
|
|
2018-02-05 12:16:00 +00:00
|
|
|
/* VIRTIO 1.0, 2.4 Virtqueues says:
|
|
|
|
*
|
|
|
|
* Queue Size value is always a power of 2. The maximum Queue Size
|
|
|
|
* value is 32768.
|
|
|
|
*/
|
|
|
|
if ((vq->size & (vq->size - 1)) || vq->size > 32768) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"invalid virtqueue size %u\n", vq->size);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
vhost: add dequeue zero copy
The basic idea of dequeue zero copy is, instead of copying data from
the desc buf, here we let the mbuf reference the desc buf addr directly.
Doing so, however, has one major issue: we can't update the used ring
at the end of rte_vhost_dequeue_burst. Because we don't do the copy
here, an update of the used ring would let the driver to reclaim the
desc buf. As a result, DPDK might reference a stale memory region.
To update the used ring properly, this patch does several tricks:
- when mbuf references a desc buf, refcnt is added by 1.
This is to pin lock the mbuf, so that a mbuf free from the DPDK
won't actually free it, instead, refcnt is subtracted by 1.
- We chain all those mbuf together (by tailq)
And we check it every time on the rte_vhost_dequeue_burst entrance,
to see if the mbuf is freed (when refcnt equals to 1). If that
happens, it means we are the last user of this mbuf and we are
safe to update the used ring.
- "struct zcopy_mbuf" is introduced, to associate an mbuf with the
right desc idx.
Dequeue zero copy is introduced for performance reason, and some rough
tests show about 50% perfomance boost for packet size 1500B. For small
packets, (e.g. 64B), it actually slows a bit down (well, it could up to
15%). That is expected because this patch introduces some extra works,
and it outweighs the benefit from saving few bytes copy.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
2016-10-09 07:27:57 +00:00
|
|
|
if (dev->dequeue_zero_copy) {
|
|
|
|
vq->nr_zmbuf = 0;
|
|
|
|
vq->last_zmbuf_idx = 0;
|
|
|
|
vq->zmbuf_size = vq->size;
|
|
|
|
vq->zmbufs = rte_zmalloc(NULL, vq->zmbuf_size *
|
|
|
|
sizeof(struct zcopy_mbuf), 0);
|
|
|
|
if (vq->zmbufs == NULL) {
|
|
|
|
RTE_LOG(WARNING, VHOST_CONFIG,
|
|
|
|
"failed to allocate mem for zero copy; "
|
|
|
|
"zero copy is force disabled\n");
|
|
|
|
dev->dequeue_zero_copy = 0;
|
|
|
|
}
|
2018-01-15 11:32:19 +00:00
|
|
|
TAILQ_INIT(&vq->zmbuf_list);
|
vhost: add dequeue zero copy
The basic idea of dequeue zero copy is, instead of copying data from
the desc buf, here we let the mbuf reference the desc buf addr directly.
Doing so, however, has one major issue: we can't update the used ring
at the end of rte_vhost_dequeue_burst. Because we don't do the copy
here, an update of the used ring would let the driver to reclaim the
desc buf. As a result, DPDK might reference a stale memory region.
To update the used ring properly, this patch does several tricks:
- when mbuf references a desc buf, refcnt is added by 1.
This is to pin lock the mbuf, so that a mbuf free from the DPDK
won't actually free it, instead, refcnt is subtracted by 1.
- We chain all those mbuf together (by tailq)
And we check it every time on the rte_vhost_dequeue_burst entrance,
to see if the mbuf is freed (when refcnt equals to 1). If that
happens, it means we are the last user of this mbuf and we are
safe to update the used ring.
- "struct zcopy_mbuf" is introduced, to associate an mbuf with the
right desc idx.
Dequeue zero copy is introduced for performance reason, and some rough
tests show about 50% perfomance boost for packet size 1500B. For small
packets, (e.g. 64B), it actually slows a bit down (well, it could up to
15%). That is expected because this patch introduces some extra works,
and it outweighs the benefit from saving few bytes copy.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
2016-10-09 07:27:57 +00:00
|
|
|
}
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2018-07-06 07:07:16 +00:00
|
|
|
if (vq_is_packed(dev)) {
|
|
|
|
vq->shadow_used_packed = rte_malloc(NULL,
|
|
|
|
vq->size *
|
|
|
|
sizeof(struct vring_used_elem_packed),
|
|
|
|
RTE_CACHE_LINE_SIZE);
|
|
|
|
if (!vq->shadow_used_packed) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"failed to allocate memory for shadow used ring.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
} else {
|
|
|
|
vq->shadow_used_split = rte_malloc(NULL,
|
2016-10-14 09:34:36 +00:00
|
|
|
vq->size * sizeof(struct vring_used_elem),
|
|
|
|
RTE_CACHE_LINE_SIZE);
|
2018-07-06 07:07:16 +00:00
|
|
|
if (!vq->shadow_used_split) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"failed to allocate memory for shadow used ring.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
2016-10-14 09:34:36 +00:00
|
|
|
}
|
|
|
|
|
2017-09-08 12:50:46 +00:00
|
|
|
vq->batch_copy_elems = rte_malloc(NULL,
|
|
|
|
vq->size * sizeof(struct batch_copy_elem),
|
|
|
|
RTE_CACHE_LINE_SIZE);
|
|
|
|
if (!vq->batch_copy_elems) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"failed to allocate memory for batching copy.\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Reallocate virtio_dev and vhost_virtqueue data structure to make them on the
|
|
|
|
* same numa node as the memory of vring descriptor.
|
|
|
|
*/
|
|
|
|
#ifdef RTE_LIBRTE_VHOST_NUMA
|
|
|
|
static struct virtio_net*
|
|
|
|
numa_realloc(struct virtio_net *dev, int index)
|
|
|
|
{
|
|
|
|
int oldnode, newnode;
|
|
|
|
struct virtio_net *old_dev;
|
|
|
|
struct vhost_virtqueue *old_vq, *vq;
|
2018-01-15 11:32:19 +00:00
|
|
|
struct zcopy_mbuf *new_zmbuf;
|
2018-07-06 07:07:16 +00:00
|
|
|
struct vring_used_elem *new_shadow_used_split;
|
|
|
|
struct vring_used_elem_packed *new_shadow_used_packed;
|
2018-01-15 11:32:19 +00:00
|
|
|
struct batch_copy_elem *new_batch_copy_elems;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
old_dev = dev;
|
|
|
|
vq = old_vq = dev->virtqueue[index];
|
|
|
|
|
|
|
|
ret = get_mempolicy(&newnode, NULL, 0, old_vq->desc,
|
|
|
|
MPOL_F_NODE | MPOL_F_ADDR);
|
|
|
|
|
|
|
|
/* check if we need to reallocate vq */
|
|
|
|
ret |= get_mempolicy(&oldnode, NULL, 0, old_vq,
|
|
|
|
MPOL_F_NODE | MPOL_F_ADDR);
|
|
|
|
if (ret) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"Unable to get vq numa information.\n");
|
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
if (oldnode != newnode) {
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"reallocate vq from %d to %d node\n", oldnode, newnode);
|
2017-04-01 07:22:47 +00:00
|
|
|
vq = rte_malloc_socket(NULL, sizeof(*vq), 0, newnode);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
if (!vq)
|
|
|
|
return dev;
|
|
|
|
|
2017-06-02 00:14:46 +00:00
|
|
|
memcpy(vq, old_vq, sizeof(*vq));
|
2018-01-15 11:32:19 +00:00
|
|
|
TAILQ_INIT(&vq->zmbuf_list);
|
|
|
|
|
2018-08-15 14:54:39 +00:00
|
|
|
if (dev->dequeue_zero_copy) {
|
|
|
|
new_zmbuf = rte_malloc_socket(NULL, vq->zmbuf_size *
|
|
|
|
sizeof(struct zcopy_mbuf), 0, newnode);
|
|
|
|
if (new_zmbuf) {
|
|
|
|
rte_free(vq->zmbufs);
|
|
|
|
vq->zmbufs = new_zmbuf;
|
|
|
|
}
|
2018-01-15 11:32:19 +00:00
|
|
|
}
|
|
|
|
|
2018-07-06 07:07:16 +00:00
|
|
|
if (vq_is_packed(dev)) {
|
|
|
|
new_shadow_used_packed = rte_malloc_socket(NULL,
|
|
|
|
vq->size *
|
|
|
|
sizeof(struct vring_used_elem_packed),
|
|
|
|
RTE_CACHE_LINE_SIZE,
|
|
|
|
newnode);
|
|
|
|
if (new_shadow_used_packed) {
|
|
|
|
rte_free(vq->shadow_used_packed);
|
|
|
|
vq->shadow_used_packed = new_shadow_used_packed;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
new_shadow_used_split = rte_malloc_socket(NULL,
|
|
|
|
vq->size *
|
|
|
|
sizeof(struct vring_used_elem),
|
|
|
|
RTE_CACHE_LINE_SIZE,
|
|
|
|
newnode);
|
|
|
|
if (new_shadow_used_split) {
|
|
|
|
rte_free(vq->shadow_used_split);
|
|
|
|
vq->shadow_used_split = new_shadow_used_split;
|
|
|
|
}
|
2018-01-15 11:32:19 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
new_batch_copy_elems = rte_malloc_socket(NULL,
|
|
|
|
vq->size * sizeof(struct batch_copy_elem),
|
|
|
|
RTE_CACHE_LINE_SIZE,
|
|
|
|
newnode);
|
|
|
|
if (new_batch_copy_elems) {
|
|
|
|
rte_free(vq->batch_copy_elems);
|
|
|
|
vq->batch_copy_elems = new_batch_copy_elems;
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
rte_free(old_vq);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* check if we need to reallocate dev */
|
|
|
|
ret = get_mempolicy(&oldnode, NULL, 0, old_dev,
|
|
|
|
MPOL_F_NODE | MPOL_F_ADDR);
|
|
|
|
if (ret) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"Unable to get dev numa information.\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
if (oldnode != newnode) {
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"reallocate dev from %d to %d node\n",
|
|
|
|
oldnode, newnode);
|
|
|
|
dev = rte_malloc_socket(NULL, sizeof(*dev), 0, newnode);
|
|
|
|
if (!dev) {
|
|
|
|
dev = old_dev;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
memcpy(dev, old_dev, sizeof(*dev));
|
|
|
|
rte_free(old_dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
dev->virtqueue[index] = vq;
|
|
|
|
vhost_devices[dev->vid] = dev;
|
|
|
|
|
2017-10-12 15:38:50 +00:00
|
|
|
if (old_vq != vq)
|
|
|
|
vhost_user_iotlb_init(dev, index);
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
static struct virtio_net*
|
|
|
|
numa_realloc(struct virtio_net *dev, int index __rte_unused)
|
|
|
|
{
|
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2017-10-05 08:36:24 +00:00
|
|
|
/* Converts QEMU virtual address to Vhost virtual address. */
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
static uint64_t
|
2018-01-23 18:01:45 +00:00
|
|
|
qva_to_vva(struct virtio_net *dev, uint64_t qva, uint64_t *len)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2018-01-23 18:01:45 +00:00
|
|
|
struct rte_vhost_mem_region *r;
|
2016-10-09 07:27:54 +00:00
|
|
|
uint32_t i;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
/* Find the region where the address lives. */
|
2016-10-09 07:27:54 +00:00
|
|
|
for (i = 0; i < dev->mem->nregions; i++) {
|
2018-01-23 18:01:45 +00:00
|
|
|
r = &dev->mem->regions[i];
|
|
|
|
|
|
|
|
if (qva >= r->guest_user_addr &&
|
|
|
|
qva < r->guest_user_addr + r->size) {
|
|
|
|
|
|
|
|
if (unlikely(*len > r->guest_user_addr + r->size - qva))
|
|
|
|
*len = r->guest_user_addr + r->size - qva;
|
2016-10-09 07:27:54 +00:00
|
|
|
|
2018-01-23 18:01:45 +00:00
|
|
|
return qva - r->guest_user_addr +
|
|
|
|
r->host_user_addr;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
}
|
2018-01-23 18:01:45 +00:00
|
|
|
*len = 0;
|
2016-10-09 07:27:54 +00:00
|
|
|
|
|
|
|
return 0;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
2017-10-05 08:36:24 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Converts ring address to Vhost virtual address.
|
|
|
|
* If IOMMU is enabled, the ring address is a guest IO virtual address,
|
|
|
|
* else it is a QEMU virtual address.
|
|
|
|
*/
|
|
|
|
static uint64_t
|
|
|
|
ring_addr_to_vva(struct virtio_net *dev, struct vhost_virtqueue *vq,
|
2018-01-23 18:01:45 +00:00
|
|
|
uint64_t ra, uint64_t *size)
|
2017-10-05 08:36:24 +00:00
|
|
|
{
|
|
|
|
if (dev->features & (1ULL << VIRTIO_F_IOMMU_PLATFORM)) {
|
|
|
|
uint64_t vva;
|
|
|
|
|
|
|
|
vva = vhost_user_iotlb_cache_find(vq, ra,
|
2018-01-23 18:01:45 +00:00
|
|
|
size, VHOST_ACCESS_RW);
|
2017-10-05 08:36:24 +00:00
|
|
|
if (!vva)
|
|
|
|
vhost_user_iotlb_miss(dev, ra, VHOST_ACCESS_RW);
|
|
|
|
|
|
|
|
return vva;
|
|
|
|
}
|
|
|
|
|
2018-01-23 18:01:45 +00:00
|
|
|
return qva_to_vva(dev, ra, size);
|
2017-10-05 08:36:24 +00:00
|
|
|
}
|
|
|
|
|
2017-10-05 08:36:23 +00:00
|
|
|
static struct virtio_net *
|
|
|
|
translate_ring_addresses(struct virtio_net *dev, int vq_index)
|
|
|
|
{
|
|
|
|
struct vhost_virtqueue *vq = dev->virtqueue[vq_index];
|
|
|
|
struct vhost_vring_addr *addr = &vq->ring_addrs;
|
2018-01-23 18:01:45 +00:00
|
|
|
uint64_t len;
|
2017-10-05 08:36:23 +00:00
|
|
|
|
2018-07-06 07:07:10 +00:00
|
|
|
if (vq_is_packed(dev)) {
|
|
|
|
len = sizeof(struct vring_packed_desc) * vq->size;
|
|
|
|
vq->desc_packed = (struct vring_packed_desc *)(uintptr_t)
|
|
|
|
ring_addr_to_vva(dev, vq, addr->desc_user_addr, &len);
|
|
|
|
vq->log_guest_addr = 0;
|
|
|
|
if (vq->desc_packed == NULL ||
|
|
|
|
len != sizeof(struct vring_packed_desc) *
|
|
|
|
vq->size) {
|
|
|
|
RTE_LOG(DEBUG, VHOST_CONFIG,
|
|
|
|
"(%d) failed to map desc_packed ring.\n",
|
|
|
|
dev->vid);
|
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev = numa_realloc(dev, vq_index);
|
|
|
|
vq = dev->virtqueue[vq_index];
|
|
|
|
addr = &vq->ring_addrs;
|
|
|
|
|
2018-07-06 07:07:21 +00:00
|
|
|
len = sizeof(struct vring_packed_desc_event);
|
|
|
|
vq->driver_event = (struct vring_packed_desc_event *)
|
|
|
|
(uintptr_t)ring_addr_to_vva(dev,
|
|
|
|
vq, addr->avail_user_addr, &len);
|
|
|
|
if (vq->driver_event == NULL ||
|
|
|
|
len != sizeof(struct vring_packed_desc_event)) {
|
|
|
|
RTE_LOG(DEBUG, VHOST_CONFIG,
|
|
|
|
"(%d) failed to find driver area address.\n",
|
|
|
|
dev->vid);
|
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
|
|
|
|
len = sizeof(struct vring_packed_desc_event);
|
|
|
|
vq->device_event = (struct vring_packed_desc_event *)
|
|
|
|
(uintptr_t)ring_addr_to_vva(dev,
|
|
|
|
vq, addr->used_user_addr, &len);
|
|
|
|
if (vq->device_event == NULL ||
|
|
|
|
len != sizeof(struct vring_packed_desc_event)) {
|
|
|
|
RTE_LOG(DEBUG, VHOST_CONFIG,
|
|
|
|
"(%d) failed to find device area address.\n",
|
|
|
|
dev->vid);
|
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
|
2018-07-06 07:07:10 +00:00
|
|
|
return dev;
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
/* The addresses are converted from QEMU virtual to Vhost virtual. */
|
2017-10-05 08:36:24 +00:00
|
|
|
if (vq->desc && vq->avail && vq->used)
|
|
|
|
return dev;
|
|
|
|
|
2018-01-23 18:01:45 +00:00
|
|
|
len = sizeof(struct vring_desc) * vq->size;
|
2017-10-05 08:36:24 +00:00
|
|
|
vq->desc = (struct vring_desc *)(uintptr_t)ring_addr_to_vva(dev,
|
2018-01-23 18:01:45 +00:00
|
|
|
vq, addr->desc_user_addr, &len);
|
|
|
|
if (vq->desc == 0 || len != sizeof(struct vring_desc) * vq->size) {
|
2017-10-05 08:36:25 +00:00
|
|
|
RTE_LOG(DEBUG, VHOST_CONFIG,
|
2018-01-23 18:01:45 +00:00
|
|
|
"(%d) failed to map desc ring.\n",
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
dev->vid);
|
2017-10-05 08:36:25 +00:00
|
|
|
return dev;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
2017-10-05 08:36:23 +00:00
|
|
|
dev = numa_realloc(dev, vq_index);
|
|
|
|
vq = dev->virtqueue[vq_index];
|
2017-10-13 09:30:21 +00:00
|
|
|
addr = &vq->ring_addrs;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2018-01-23 18:01:45 +00:00
|
|
|
len = sizeof(struct vring_avail) + sizeof(uint16_t) * vq->size;
|
2017-10-05 08:36:24 +00:00
|
|
|
vq->avail = (struct vring_avail *)(uintptr_t)ring_addr_to_vva(dev,
|
2018-01-23 18:01:45 +00:00
|
|
|
vq, addr->avail_user_addr, &len);
|
|
|
|
if (vq->avail == 0 ||
|
|
|
|
len != sizeof(struct vring_avail) +
|
|
|
|
sizeof(uint16_t) * vq->size) {
|
2017-10-05 08:36:25 +00:00
|
|
|
RTE_LOG(DEBUG, VHOST_CONFIG,
|
2018-01-23 18:01:45 +00:00
|
|
|
"(%d) failed to map avail ring.\n",
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
dev->vid);
|
2017-10-05 08:36:25 +00:00
|
|
|
return dev;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
2018-01-23 18:01:45 +00:00
|
|
|
len = sizeof(struct vring_used) +
|
|
|
|
sizeof(struct vring_used_elem) * vq->size;
|
2017-10-05 08:36:24 +00:00
|
|
|
vq->used = (struct vring_used *)(uintptr_t)ring_addr_to_vva(dev,
|
2018-01-23 18:01:45 +00:00
|
|
|
vq, addr->used_user_addr, &len);
|
|
|
|
if (vq->used == 0 || len != sizeof(struct vring_used) +
|
|
|
|
sizeof(struct vring_used_elem) * vq->size) {
|
2017-10-05 08:36:25 +00:00
|
|
|
RTE_LOG(DEBUG, VHOST_CONFIG,
|
2018-01-23 18:01:45 +00:00
|
|
|
"(%d) failed to map used ring.\n",
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
dev->vid);
|
2017-10-05 08:36:25 +00:00
|
|
|
return dev;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (vq->last_used_idx != vq->used->idx) {
|
|
|
|
RTE_LOG(WARNING, VHOST_CONFIG,
|
|
|
|
"last_used_idx (%u) and vq->used->idx (%u) mismatches; "
|
|
|
|
"some packets maybe resent for Tx and dropped for Rx\n",
|
|
|
|
vq->last_used_idx, vq->used->idx);
|
2016-10-09 07:27:56 +00:00
|
|
|
vq->last_used_idx = vq->used->idx;
|
|
|
|
vq->last_avail_idx = vq->used->idx;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
2017-10-05 08:36:23 +00:00
|
|
|
vq->log_guest_addr = addr->log_guest_addr;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2018-02-09 17:24:00 +00:00
|
|
|
VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address desc: %p\n",
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
dev->vid, vq->desc);
|
2018-02-09 17:24:00 +00:00
|
|
|
VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address avail: %p\n",
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
dev->vid, vq->avail);
|
2018-02-09 17:24:00 +00:00
|
|
|
VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) mapped address used: %p\n",
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
dev->vid, vq->used);
|
2018-02-09 17:24:00 +00:00
|
|
|
VHOST_LOG_DEBUG(VHOST_CONFIG, "(%d) log_guest_addr: %" PRIx64 "\n",
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
dev->vid, vq->log_guest_addr);
|
|
|
|
|
2017-10-05 08:36:23 +00:00
|
|
|
return dev;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
2017-10-16 14:56:27 +00:00
|
|
|
/*
|
|
|
|
* The virtio device sends us the desc, used and avail ring addresses.
|
|
|
|
* This function then converts these to our address space.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
vhost_user_set_vring_addr(struct virtio_net **pdev, VhostUserMsg *msg)
|
|
|
|
{
|
|
|
|
struct vhost_virtqueue *vq;
|
|
|
|
struct vhost_vring_addr *addr = &msg->payload.addr;
|
|
|
|
struct virtio_net *dev = *pdev;
|
|
|
|
|
|
|
|
if (dev->mem == NULL)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
/* addr->index refers to the queue index. The txq 1, rxq is 0. */
|
|
|
|
vq = dev->virtqueue[msg->payload.addr.index];
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Rings addresses should not be interpreted as long as the ring is not
|
|
|
|
* started and enabled
|
|
|
|
*/
|
|
|
|
memcpy(&vq->ring_addrs, addr, sizeof(*addr));
|
|
|
|
|
|
|
|
vring_invalidate(dev, vq);
|
|
|
|
|
|
|
|
if (vq->enabled && (dev->features &
|
|
|
|
(1ULL << VHOST_USER_F_PROTOCOL_FEATURES))) {
|
2018-02-05 12:16:00 +00:00
|
|
|
dev = translate_ring_addresses(dev, msg->payload.addr.index);
|
2017-10-16 14:56:27 +00:00
|
|
|
if (!dev)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
*pdev = dev;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
/*
|
|
|
|
* The virtio device sends us the available ring last used index.
|
|
|
|
*/
|
|
|
|
static int
|
2016-08-18 08:48:42 +00:00
|
|
|
vhost_user_set_vring_base(struct virtio_net *dev,
|
2017-05-26 11:59:15 +00:00
|
|
|
VhostUserMsg *msg)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2017-05-26 11:59:15 +00:00
|
|
|
dev->virtqueue[msg->payload.state.index]->last_used_idx =
|
|
|
|
msg->payload.state.num;
|
|
|
|
dev->virtqueue[msg->payload.state.index]->last_avail_idx =
|
|
|
|
msg->payload.state.num;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-02-09 17:19:00 +00:00
|
|
|
static int
|
2016-10-09 07:27:55 +00:00
|
|
|
add_one_guest_page(struct virtio_net *dev, uint64_t guest_phys_addr,
|
|
|
|
uint64_t host_phys_addr, uint64_t size)
|
|
|
|
{
|
|
|
|
struct guest_page *page, *last_page;
|
|
|
|
|
|
|
|
if (dev->nr_guest_pages == dev->max_guest_pages) {
|
|
|
|
dev->max_guest_pages *= 2;
|
|
|
|
dev->guest_pages = realloc(dev->guest_pages,
|
|
|
|
dev->max_guest_pages * sizeof(*page));
|
2018-02-09 17:19:00 +00:00
|
|
|
if (!dev->guest_pages) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG, "cannot realloc guest_pages\n");
|
|
|
|
return -1;
|
|
|
|
}
|
2016-10-09 07:27:55 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (dev->nr_guest_pages > 0) {
|
|
|
|
last_page = &dev->guest_pages[dev->nr_guest_pages - 1];
|
|
|
|
/* merge if the two pages are continuous */
|
|
|
|
if (host_phys_addr == last_page->host_phys_addr +
|
|
|
|
last_page->size) {
|
|
|
|
last_page->size += size;
|
2018-02-09 17:19:00 +00:00
|
|
|
return 0;
|
2016-10-09 07:27:55 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
page = &dev->guest_pages[dev->nr_guest_pages++];
|
|
|
|
page->guest_phys_addr = guest_phys_addr;
|
|
|
|
page->host_phys_addr = host_phys_addr;
|
|
|
|
page->size = size;
|
2018-02-09 17:19:00 +00:00
|
|
|
|
|
|
|
return 0;
|
2016-10-09 07:27:55 +00:00
|
|
|
}
|
|
|
|
|
2018-02-09 17:19:00 +00:00
|
|
|
static int
|
2017-04-01 07:22:43 +00:00
|
|
|
add_guest_pages(struct virtio_net *dev, struct rte_vhost_mem_region *reg,
|
2016-10-09 07:27:55 +00:00
|
|
|
uint64_t page_size)
|
|
|
|
{
|
|
|
|
uint64_t reg_size = reg->size;
|
|
|
|
uint64_t host_user_addr = reg->host_user_addr;
|
|
|
|
uint64_t guest_phys_addr = reg->guest_phys_addr;
|
|
|
|
uint64_t host_phys_addr;
|
|
|
|
uint64_t size;
|
|
|
|
|
2017-11-04 16:15:04 +00:00
|
|
|
host_phys_addr = rte_mem_virt2iova((void *)(uintptr_t)host_user_addr);
|
2016-10-09 07:27:55 +00:00
|
|
|
size = page_size - (guest_phys_addr & (page_size - 1));
|
|
|
|
size = RTE_MIN(size, reg_size);
|
|
|
|
|
2018-02-09 17:19:00 +00:00
|
|
|
if (add_one_guest_page(dev, guest_phys_addr, host_phys_addr, size) < 0)
|
|
|
|
return -1;
|
|
|
|
|
2016-10-09 07:27:55 +00:00
|
|
|
host_user_addr += size;
|
|
|
|
guest_phys_addr += size;
|
|
|
|
reg_size -= size;
|
|
|
|
|
|
|
|
while (reg_size > 0) {
|
2016-12-01 11:42:02 +00:00
|
|
|
size = RTE_MIN(reg_size, page_size);
|
2017-11-04 16:15:04 +00:00
|
|
|
host_phys_addr = rte_mem_virt2iova((void *)(uintptr_t)
|
2016-10-09 07:27:55 +00:00
|
|
|
host_user_addr);
|
2018-02-09 17:19:00 +00:00
|
|
|
if (add_one_guest_page(dev, guest_phys_addr, host_phys_addr,
|
|
|
|
size) < 0)
|
|
|
|
return -1;
|
2016-10-09 07:27:55 +00:00
|
|
|
|
2016-12-01 11:42:02 +00:00
|
|
|
host_user_addr += size;
|
|
|
|
guest_phys_addr += size;
|
|
|
|
reg_size -= size;
|
2016-10-09 07:27:55 +00:00
|
|
|
}
|
2018-02-09 17:19:00 +00:00
|
|
|
|
|
|
|
return 0;
|
2016-10-09 07:27:55 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef RTE_LIBRTE_VHOST_DEBUG
|
|
|
|
/* TODO: enable it only in debug mode? */
|
|
|
|
static void
|
|
|
|
dump_guest_pages(struct virtio_net *dev)
|
|
|
|
{
|
|
|
|
uint32_t i;
|
|
|
|
struct guest_page *page;
|
|
|
|
|
|
|
|
for (i = 0; i < dev->nr_guest_pages; i++) {
|
|
|
|
page = &dev->guest_pages[i];
|
|
|
|
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"guest physical page region %u\n"
|
|
|
|
"\t guest_phys_addr: %" PRIx64 "\n"
|
|
|
|
"\t host_phys_addr : %" PRIx64 "\n"
|
|
|
|
"\t size : %" PRIx64 "\n",
|
|
|
|
i,
|
|
|
|
page->guest_phys_addr,
|
|
|
|
page->host_phys_addr,
|
|
|
|
page->size);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
#define dump_guest_pages(dev)
|
|
|
|
#endif
|
|
|
|
|
2017-11-15 11:41:08 +00:00
|
|
|
static bool
|
|
|
|
vhost_memory_changed(struct VhostUserMemory *new,
|
|
|
|
struct rte_vhost_memory *old)
|
|
|
|
{
|
|
|
|
uint32_t i;
|
|
|
|
|
|
|
|
if (new->nregions != old->nregions)
|
|
|
|
return true;
|
|
|
|
|
|
|
|
for (i = 0; i < new->nregions; ++i) {
|
|
|
|
VhostUserMemoryRegion *new_r = &new->regions[i];
|
|
|
|
struct rte_vhost_mem_region *old_r = &old->regions[i];
|
|
|
|
|
|
|
|
if (new_r->guest_phys_addr != old_r->guest_phys_addr)
|
|
|
|
return true;
|
|
|
|
if (new_r->memory_size != old_r->size)
|
|
|
|
return true;
|
|
|
|
if (new_r->userspace_addr != old_r->guest_user_addr)
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
static int
|
2018-05-08 07:10:44 +00:00
|
|
|
vhost_user_set_mem_table(struct virtio_net **pdev, struct VhostUserMsg *pmsg)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2018-05-08 07:10:44 +00:00
|
|
|
struct virtio_net *dev = *pdev;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
struct VhostUserMemory memory = pmsg->payload.memory;
|
2017-04-01 07:22:43 +00:00
|
|
|
struct rte_vhost_mem_region *reg;
|
2016-10-09 07:27:54 +00:00
|
|
|
void *mmap_addr;
|
|
|
|
uint64_t mmap_size;
|
|
|
|
uint64_t mmap_offset;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
uint64_t alignment;
|
2016-10-09 07:27:54 +00:00
|
|
|
uint32_t i;
|
2018-03-28 06:56:07 +00:00
|
|
|
int populate;
|
2016-10-09 07:27:54 +00:00
|
|
|
int fd;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2018-02-05 12:16:00 +00:00
|
|
|
if (memory.nregions > VHOST_MEMORY_MAX_NREGIONS) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"too many memory regions (%u)\n", memory.nregions);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2017-11-15 11:41:08 +00:00
|
|
|
if (dev->mem && !vhost_memory_changed(&memory, dev->mem)) {
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"(%d) memory regions not changed\n", dev->vid);
|
|
|
|
|
|
|
|
for (i = 0; i < memory.nregions; i++)
|
|
|
|
close(pmsg->fds[i]);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
if (dev->mem) {
|
|
|
|
free_mem_region(dev);
|
2016-10-09 07:27:54 +00:00
|
|
|
rte_free(dev->mem);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
dev->mem = NULL;
|
|
|
|
}
|
|
|
|
|
2018-08-02 17:21:22 +00:00
|
|
|
/* Flush IOTLB cache as previous HVAs are now invalid */
|
|
|
|
if (dev->features & (1ULL << VIRTIO_F_IOMMU_PLATFORM))
|
|
|
|
for (i = 0; i < dev->nr_vring; i++)
|
|
|
|
vhost_user_iotlb_flush_all(dev->virtqueue[i]);
|
|
|
|
|
2016-10-09 07:27:55 +00:00
|
|
|
dev->nr_guest_pages = 0;
|
|
|
|
if (!dev->guest_pages) {
|
|
|
|
dev->max_guest_pages = 8;
|
|
|
|
dev->guest_pages = malloc(dev->max_guest_pages *
|
|
|
|
sizeof(struct guest_page));
|
2017-05-11 15:25:26 +00:00
|
|
|
if (dev->guest_pages == NULL) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"(%d) failed to allocate memory "
|
|
|
|
"for dev->guest_pages\n",
|
|
|
|
dev->vid);
|
|
|
|
return -1;
|
|
|
|
}
|
2016-10-09 07:27:55 +00:00
|
|
|
}
|
|
|
|
|
2017-04-01 07:22:43 +00:00
|
|
|
dev->mem = rte_zmalloc("vhost-mem-table", sizeof(struct rte_vhost_memory) +
|
|
|
|
sizeof(struct rte_vhost_mem_region) * memory.nregions, 0);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
if (dev->mem == NULL) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"(%d) failed to allocate memory for dev->mem\n",
|
|
|
|
dev->vid);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
dev->mem->nregions = memory.nregions;
|
|
|
|
|
2016-10-09 07:27:54 +00:00
|
|
|
for (i = 0; i < memory.nregions; i++) {
|
|
|
|
fd = pmsg->fds[i];
|
|
|
|
reg = &dev->mem->regions[i];
|
|
|
|
|
|
|
|
reg->guest_phys_addr = memory.regions[i].guest_phys_addr;
|
|
|
|
reg->guest_user_addr = memory.regions[i].userspace_addr;
|
|
|
|
reg->size = memory.regions[i].memory_size;
|
|
|
|
reg->fd = fd;
|
|
|
|
|
|
|
|
mmap_offset = memory.regions[i].mmap_offset;
|
2018-02-05 12:16:00 +00:00
|
|
|
|
|
|
|
/* Check for memory_size + mmap_offset overflow */
|
|
|
|
if (mmap_offset >= -reg->size) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"mmap_offset (%#"PRIx64") and memory_size "
|
|
|
|
"(%#"PRIx64") overflow\n",
|
|
|
|
mmap_offset, reg->size);
|
|
|
|
goto err_mmap;
|
|
|
|
}
|
|
|
|
|
|
|
|
mmap_size = reg->size + mmap_offset;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
/* mmap() without flag of MAP_ANONYMOUS, should be called
|
|
|
|
* with length argument aligned with hugepagesz at older
|
|
|
|
* longterm version Linux, like 2.6.32 and 3.2.72, or
|
|
|
|
* mmap() will fail with EINVAL.
|
|
|
|
*
|
|
|
|
* to avoid failure, make sure in caller to keep length
|
|
|
|
* aligned.
|
|
|
|
*/
|
2016-10-09 07:27:54 +00:00
|
|
|
alignment = get_blk_size(fd);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
if (alignment == (uint64_t)-1) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"couldn't get hugepage size through fstat\n");
|
|
|
|
goto err_mmap;
|
|
|
|
}
|
2016-10-09 07:27:54 +00:00
|
|
|
mmap_size = RTE_ALIGN_CEIL(mmap_size, alignment);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2018-03-28 06:56:07 +00:00
|
|
|
populate = (dev->dequeue_zero_copy) ? MAP_POPULATE : 0;
|
2016-10-09 07:27:55 +00:00
|
|
|
mmap_addr = mmap(NULL, mmap_size, PROT_READ | PROT_WRITE,
|
2018-03-28 06:56:07 +00:00
|
|
|
MAP_SHARED | populate, fd, 0);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2016-10-09 07:27:54 +00:00
|
|
|
if (mmap_addr == MAP_FAILED) {
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
2016-10-09 07:27:54 +00:00
|
|
|
"mmap region %u failed.\n", i);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
goto err_mmap;
|
|
|
|
}
|
|
|
|
|
2016-10-09 07:27:54 +00:00
|
|
|
reg->mmap_addr = mmap_addr;
|
|
|
|
reg->mmap_size = mmap_size;
|
|
|
|
reg->host_user_addr = (uint64_t)(uintptr_t)mmap_addr +
|
|
|
|
mmap_offset;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2017-01-22 08:46:59 +00:00
|
|
|
if (dev->dequeue_zero_copy)
|
2018-02-09 17:19:00 +00:00
|
|
|
if (add_guest_pages(dev, reg, alignment) < 0) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"adding guest pages to region %u failed.\n",
|
|
|
|
i);
|
|
|
|
goto err_mmap;
|
|
|
|
}
|
2016-10-09 07:27:55 +00:00
|
|
|
|
2016-10-09 07:27:54 +00:00
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"guest memory region %u, size: 0x%" PRIx64 "\n"
|
|
|
|
"\t guest physical addr: 0x%" PRIx64 "\n"
|
|
|
|
"\t guest virtual addr: 0x%" PRIx64 "\n"
|
|
|
|
"\t host virtual addr: 0x%" PRIx64 "\n"
|
|
|
|
"\t mmap addr : 0x%" PRIx64 "\n"
|
|
|
|
"\t mmap size : 0x%" PRIx64 "\n"
|
|
|
|
"\t mmap align: 0x%" PRIx64 "\n"
|
|
|
|
"\t mmap off : 0x%" PRIx64 "\n",
|
|
|
|
i, reg->size,
|
|
|
|
reg->guest_phys_addr,
|
|
|
|
reg->guest_user_addr,
|
|
|
|
reg->host_user_addr,
|
|
|
|
(uint64_t)(uintptr_t)mmap_addr,
|
|
|
|
mmap_size,
|
|
|
|
alignment,
|
|
|
|
mmap_offset);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
2018-05-08 07:10:44 +00:00
|
|
|
for (i = 0; i < dev->nr_vring; i++) {
|
|
|
|
struct vhost_virtqueue *vq = dev->virtqueue[i];
|
|
|
|
|
|
|
|
if (vq->desc || vq->avail || vq->used) {
|
|
|
|
/*
|
|
|
|
* If the memory table got updated, the ring addresses
|
|
|
|
* need to be translated again as virtual addresses have
|
|
|
|
* changed.
|
|
|
|
*/
|
|
|
|
vring_invalidate(dev, vq);
|
|
|
|
|
|
|
|
dev = translate_ring_addresses(dev, i);
|
|
|
|
if (!dev)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
*pdev = dev;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-10-09 07:27:55 +00:00
|
|
|
dump_guest_pages(dev);
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_mmap:
|
2016-10-09 07:27:54 +00:00
|
|
|
free_mem_region(dev);
|
|
|
|
rte_free(dev->mem);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
dev->mem = NULL;
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2018-07-06 07:07:10 +00:00
|
|
|
static bool
|
|
|
|
vq_is_ready(struct virtio_net *dev, struct vhost_virtqueue *vq)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2018-07-06 07:07:10 +00:00
|
|
|
bool rings_ok;
|
|
|
|
|
|
|
|
if (!vq)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (vq_is_packed(dev))
|
|
|
|
rings_ok = !!vq->desc_packed;
|
|
|
|
else
|
|
|
|
rings_ok = vq->desc && vq->avail && vq->used;
|
|
|
|
|
|
|
|
return rings_ok &&
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
vq->kickfd != VIRTIO_UNINITIALIZED_EVENTFD &&
|
|
|
|
vq->callfd != VIRTIO_UNINITIALIZED_EVENTFD;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
virtio_is_ready(struct virtio_net *dev)
|
|
|
|
{
|
2017-04-01 07:22:47 +00:00
|
|
|
struct vhost_virtqueue *vq;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
uint32_t i;
|
|
|
|
|
2017-04-01 07:22:49 +00:00
|
|
|
if (dev->nr_vring == 0)
|
|
|
|
return 0;
|
|
|
|
|
2017-04-01 07:22:47 +00:00
|
|
|
for (i = 0; i < dev->nr_vring; i++) {
|
|
|
|
vq = dev->virtqueue[i];
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2018-07-06 07:07:10 +00:00
|
|
|
if (!vq_is_ready(dev, vq))
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"virtio is now ready for processing.\n");
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2016-08-18 08:48:42 +00:00
|
|
|
vhost_user_set_vring_call(struct virtio_net *dev, struct VhostUserMsg *pmsg)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
|
|
|
struct vhost_vring_file file;
|
2016-08-18 08:48:40 +00:00
|
|
|
struct vhost_virtqueue *vq;
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
file.index = pmsg->payload.u64 & VHOST_USER_VRING_IDX_MASK;
|
|
|
|
if (pmsg->payload.u64 & VHOST_USER_VRING_NOFD_MASK)
|
|
|
|
file.fd = VIRTIO_INVALID_EVENTFD;
|
|
|
|
else
|
|
|
|
file.fd = pmsg->fds[0];
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"vring call idx:%d file:%d\n", file.index, file.fd);
|
2016-08-18 08:48:40 +00:00
|
|
|
|
|
|
|
vq = dev->virtqueue[file.index];
|
|
|
|
if (vq->callfd >= 0)
|
|
|
|
close(vq->callfd);
|
|
|
|
|
|
|
|
vq->callfd = file.fd;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
2018-09-03 10:12:24 +00:00
|
|
|
static int
|
2017-10-05 08:36:23 +00:00
|
|
|
vhost_user_set_vring_kick(struct virtio_net **pdev, struct VhostUserMsg *pmsg)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
|
|
|
struct vhost_vring_file file;
|
2016-08-18 08:48:40 +00:00
|
|
|
struct vhost_virtqueue *vq;
|
2017-10-05 08:36:23 +00:00
|
|
|
struct virtio_net *dev = *pdev;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
file.index = pmsg->payload.u64 & VHOST_USER_VRING_IDX_MASK;
|
|
|
|
if (pmsg->payload.u64 & VHOST_USER_VRING_NOFD_MASK)
|
|
|
|
file.fd = VIRTIO_INVALID_EVENTFD;
|
|
|
|
else
|
|
|
|
file.fd = pmsg->fds[0];
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"vring kick idx:%d file:%d\n", file.index, file.fd);
|
2016-08-18 08:48:40 +00:00
|
|
|
|
2017-11-03 15:52:35 +00:00
|
|
|
/* Interpret ring addresses only when ring is started. */
|
|
|
|
dev = translate_ring_addresses(dev, file.index);
|
|
|
|
if (!dev)
|
2018-09-03 10:12:24 +00:00
|
|
|
return -1;
|
2017-11-03 15:52:35 +00:00
|
|
|
|
|
|
|
*pdev = dev;
|
2017-10-05 08:36:23 +00:00
|
|
|
|
2016-08-18 08:48:40 +00:00
|
|
|
vq = dev->virtqueue[file.index];
|
2017-10-05 08:36:21 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* When VHOST_USER_F_PROTOCOL_FEATURES is not negotiated,
|
|
|
|
* the ring starts already enabled. Otherwise, it is enabled via
|
|
|
|
* the SET_VRING_ENABLE message.
|
|
|
|
*/
|
|
|
|
if (!(dev->features & (1ULL << VHOST_USER_F_PROTOCOL_FEATURES)))
|
|
|
|
vq->enabled = 1;
|
|
|
|
|
2016-08-18 08:48:40 +00:00
|
|
|
if (vq->kickfd >= 0)
|
|
|
|
close(vq->kickfd);
|
|
|
|
vq->kickfd = file.fd;
|
2018-09-03 10:12:24 +00:00
|
|
|
return 0;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
vhost: add dequeue zero copy
The basic idea of dequeue zero copy is, instead of copying data from
the desc buf, here we let the mbuf reference the desc buf addr directly.
Doing so, however, has one major issue: we can't update the used ring
at the end of rte_vhost_dequeue_burst. Because we don't do the copy
here, an update of the used ring would let the driver to reclaim the
desc buf. As a result, DPDK might reference a stale memory region.
To update the used ring properly, this patch does several tricks:
- when mbuf references a desc buf, refcnt is added by 1.
This is to pin lock the mbuf, so that a mbuf free from the DPDK
won't actually free it, instead, refcnt is subtracted by 1.
- We chain all those mbuf together (by tailq)
And we check it every time on the rte_vhost_dequeue_burst entrance,
to see if the mbuf is freed (when refcnt equals to 1). If that
happens, it means we are the last user of this mbuf and we are
safe to update the used ring.
- "struct zcopy_mbuf" is introduced, to associate an mbuf with the
right desc idx.
Dequeue zero copy is introduced for performance reason, and some rough
tests show about 50% perfomance boost for packet size 1500B. For small
packets, (e.g. 64B), it actually slows a bit down (well, it could up to
15%). That is expected because this patch introduces some extra works,
and it outweighs the benefit from saving few bytes copy.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
2016-10-09 07:27:57 +00:00
|
|
|
static void
|
|
|
|
free_zmbufs(struct vhost_virtqueue *vq)
|
|
|
|
{
|
|
|
|
struct zcopy_mbuf *zmbuf, *next;
|
|
|
|
|
|
|
|
for (zmbuf = TAILQ_FIRST(&vq->zmbuf_list);
|
|
|
|
zmbuf != NULL; zmbuf = next) {
|
|
|
|
next = TAILQ_NEXT(zmbuf, next);
|
|
|
|
|
|
|
|
rte_pktmbuf_free(zmbuf->mbuf);
|
|
|
|
TAILQ_REMOVE(&vq->zmbuf_list, zmbuf, next);
|
|
|
|
}
|
|
|
|
|
|
|
|
rte_free(vq->zmbufs);
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
/*
|
|
|
|
* when virtio is stopped, qemu will send us the GET_VRING_BASE message.
|
|
|
|
*/
|
|
|
|
static int
|
2016-08-18 08:48:42 +00:00
|
|
|
vhost_user_get_vring_base(struct virtio_net *dev,
|
2017-05-26 11:59:15 +00:00
|
|
|
VhostUserMsg *msg)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2017-05-26 11:59:15 +00:00
|
|
|
struct vhost_virtqueue *vq = dev->virtqueue[msg->payload.state.index];
|
2016-10-14 09:34:36 +00:00
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
/* We have to stop the queue (virtio) if it is running. */
|
2018-06-13 11:54:18 +00:00
|
|
|
vhost_destroy_device_notify(dev);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2017-03-12 16:34:00 +00:00
|
|
|
dev->flags &= ~VIRTIO_DEV_READY;
|
2018-04-02 11:46:55 +00:00
|
|
|
dev->flags &= ~VIRTIO_DEV_VDPA_CONFIGURED;
|
2017-03-12 16:34:00 +00:00
|
|
|
|
2018-02-09 17:28:00 +00:00
|
|
|
/* Here we are safe to get the last avail index */
|
|
|
|
msg->payload.state.num = vq->last_avail_idx;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
2017-05-26 11:59:15 +00:00
|
|
|
"vring base idx:%d file:%d\n", msg->payload.state.index,
|
|
|
|
msg->payload.state.num);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
/*
|
|
|
|
* Based on current qemu vhost-user implementation, this message is
|
|
|
|
* sent and only sent in vhost_vring_stop.
|
|
|
|
* TODO: cleanup the vring, it isn't usable since here.
|
|
|
|
*/
|
2016-10-14 09:34:36 +00:00
|
|
|
if (vq->kickfd >= 0)
|
|
|
|
close(vq->kickfd);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2016-10-14 09:34:36 +00:00
|
|
|
vq->kickfd = VIRTIO_UNINITIALIZED_EVENTFD;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2018-02-09 17:10:00 +00:00
|
|
|
if (vq->callfd >= 0)
|
|
|
|
close(vq->callfd);
|
|
|
|
|
|
|
|
vq->callfd = VIRTIO_UNINITIALIZED_EVENTFD;
|
|
|
|
|
vhost: add dequeue zero copy
The basic idea of dequeue zero copy is, instead of copying data from
the desc buf, here we let the mbuf reference the desc buf addr directly.
Doing so, however, has one major issue: we can't update the used ring
at the end of rte_vhost_dequeue_burst. Because we don't do the copy
here, an update of the used ring would let the driver to reclaim the
desc buf. As a result, DPDK might reference a stale memory region.
To update the used ring properly, this patch does several tricks:
- when mbuf references a desc buf, refcnt is added by 1.
This is to pin lock the mbuf, so that a mbuf free from the DPDK
won't actually free it, instead, refcnt is subtracted by 1.
- We chain all those mbuf together (by tailq)
And we check it every time on the rte_vhost_dequeue_burst entrance,
to see if the mbuf is freed (when refcnt equals to 1). If that
happens, it means we are the last user of this mbuf and we are
safe to update the used ring.
- "struct zcopy_mbuf" is introduced, to associate an mbuf with the
right desc idx.
Dequeue zero copy is introduced for performance reason, and some rough
tests show about 50% perfomance boost for packet size 1500B. For small
packets, (e.g. 64B), it actually slows a bit down (well, it could up to
15%). That is expected because this patch introduces some extra works,
and it outweighs the benefit from saving few bytes copy.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
2016-10-09 07:27:57 +00:00
|
|
|
if (dev->dequeue_zero_copy)
|
2016-10-14 09:34:36 +00:00
|
|
|
free_zmbufs(vq);
|
2018-07-06 07:07:16 +00:00
|
|
|
if (vq_is_packed(dev)) {
|
|
|
|
rte_free(vq->shadow_used_packed);
|
|
|
|
vq->shadow_used_packed = NULL;
|
|
|
|
} else {
|
|
|
|
rte_free(vq->shadow_used_split);
|
|
|
|
vq->shadow_used_split = NULL;
|
|
|
|
}
|
vhost: add dequeue zero copy
The basic idea of dequeue zero copy is, instead of copying data from
the desc buf, here we let the mbuf reference the desc buf addr directly.
Doing so, however, has one major issue: we can't update the used ring
at the end of rte_vhost_dequeue_burst. Because we don't do the copy
here, an update of the used ring would let the driver to reclaim the
desc buf. As a result, DPDK might reference a stale memory region.
To update the used ring properly, this patch does several tricks:
- when mbuf references a desc buf, refcnt is added by 1.
This is to pin lock the mbuf, so that a mbuf free from the DPDK
won't actually free it, instead, refcnt is subtracted by 1.
- We chain all those mbuf together (by tailq)
And we check it every time on the rte_vhost_dequeue_burst entrance,
to see if the mbuf is freed (when refcnt equals to 1). If that
happens, it means we are the last user of this mbuf and we are
safe to update the used ring.
- "struct zcopy_mbuf" is introduced, to associate an mbuf with the
right desc idx.
Dequeue zero copy is introduced for performance reason, and some rough
tests show about 50% perfomance boost for packet size 1500B. For small
packets, (e.g. 64B), it actually slows a bit down (well, it could up to
15%). That is expected because this patch introduces some extra works,
and it outweighs the benefit from saving few bytes copy.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
2016-10-09 07:27:57 +00:00
|
|
|
|
2017-09-08 12:50:46 +00:00
|
|
|
rte_free(vq->batch_copy_elems);
|
|
|
|
vq->batch_copy_elems = NULL;
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* when virtio queues are ready to work, qemu will send us to
|
|
|
|
* enable the virtio queue pair.
|
|
|
|
*/
|
|
|
|
static int
|
2017-11-03 15:52:35 +00:00
|
|
|
vhost_user_set_vring_enable(struct virtio_net *dev,
|
2017-05-26 11:59:15 +00:00
|
|
|
VhostUserMsg *msg)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2017-05-26 11:59:15 +00:00
|
|
|
int enable = (int)msg->payload.state.num;
|
2018-04-02 11:46:55 +00:00
|
|
|
int index = (int)msg->payload.state.index;
|
|
|
|
struct rte_vdpa_device *vdpa_dev;
|
|
|
|
int did = -1;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"set queue enable: %d to qp idx: %d\n",
|
2018-04-02 11:46:55 +00:00
|
|
|
enable, index);
|
|
|
|
|
|
|
|
did = dev->vdpa_dev_id;
|
|
|
|
vdpa_dev = rte_vdpa_get_device(did);
|
|
|
|
if (vdpa_dev && vdpa_dev->ops->set_vring_state)
|
|
|
|
vdpa_dev->ops->set_vring_state(dev->vid, index, enable);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2017-04-01 07:22:42 +00:00
|
|
|
if (dev->notify_ops->vring_state_changed)
|
2017-05-26 11:59:15 +00:00
|
|
|
dev->notify_ops->vring_state_changed(dev->vid,
|
2018-04-02 11:46:55 +00:00
|
|
|
index, enable);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2018-04-02 11:46:55 +00:00
|
|
|
dev->virtqueue[index]->enabled = enable;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-11-06 20:38:10 +00:00
|
|
|
static void
|
|
|
|
vhost_user_get_protocol_features(struct virtio_net *dev,
|
|
|
|
struct VhostUserMsg *msg)
|
|
|
|
{
|
2018-04-02 11:46:55 +00:00
|
|
|
uint64_t features, protocol_features;
|
2017-11-06 20:38:10 +00:00
|
|
|
|
|
|
|
rte_vhost_driver_get_features(dev->ifname, &features);
|
2018-04-02 11:46:55 +00:00
|
|
|
rte_vhost_driver_get_protocol_features(dev->ifname, &protocol_features);
|
2017-11-06 20:38:10 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* REPLY_ACK protocol feature is only mandatory for now
|
|
|
|
* for IOMMU feature. If IOMMU is explicitly disabled by the
|
|
|
|
* application, disable also REPLY_ACK feature for older buggy
|
|
|
|
* Qemu versions (from v2.7.0 to v2.9.0).
|
|
|
|
*/
|
|
|
|
if (!(features & (1ULL << VIRTIO_F_IOMMU_PLATFORM)))
|
|
|
|
protocol_features &= ~(1ULL << VHOST_USER_PROTOCOL_F_REPLY_ACK);
|
|
|
|
|
|
|
|
msg->payload.u64 = protocol_features;
|
|
|
|
msg->size = sizeof(msg->payload.u64);
|
|
|
|
}
|
|
|
|
|
2018-09-03 10:12:24 +00:00
|
|
|
static int
|
2016-08-18 08:48:42 +00:00
|
|
|
vhost_user_set_protocol_features(struct virtio_net *dev,
|
|
|
|
uint64_t protocol_features)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2018-09-03 10:12:24 +00:00
|
|
|
if (protocol_features & ~VHOST_USER_PROTOCOL_FEATURES) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"(%d) received invalid protocol features.\n",
|
|
|
|
dev->vid);
|
|
|
|
return -1;
|
|
|
|
}
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
dev->protocol_features = protocol_features;
|
2018-09-03 10:12:24 +00:00
|
|
|
return 0;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2016-08-18 08:48:42 +00:00
|
|
|
vhost_user_set_log_base(struct virtio_net *dev, struct VhostUserMsg *msg)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
|
|
|
int fd = msg->fds[0];
|
|
|
|
uint64_t size, off;
|
|
|
|
void *addr;
|
|
|
|
|
|
|
|
if (fd < 0) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG, "invalid log fd: %d\n", fd);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (msg->size != sizeof(VhostUserLog)) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"invalid log base msg size: %"PRId32" != %d\n",
|
|
|
|
msg->size, (int)sizeof(VhostUserLog));
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
size = msg->payload.log.mmap_size;
|
|
|
|
off = msg->payload.log.mmap_offset;
|
2018-02-05 12:16:00 +00:00
|
|
|
|
|
|
|
/* Don't allow mmap_offset to point outside the mmap region */
|
|
|
|
if (off > size) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"log offset %#"PRIx64" exceeds log size %#"PRIx64"\n",
|
|
|
|
off, size);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"log mmap size: %"PRId64", offset: %"PRId64"\n",
|
|
|
|
size, off);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* mmap from 0 to workaround a hugepage mmap bug: mmap will
|
|
|
|
* fail when offset is not page size aligned.
|
|
|
|
*/
|
2018-02-08 16:59:00 +00:00
|
|
|
addr = mmap(0, size + off, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
close(fd);
|
|
|
|
if (addr == MAP_FAILED) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG, "mmap log base failed!\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Free previously mapped log memory on occasionally
|
|
|
|
* multiple VHOST_USER_SET_LOG_BASE.
|
|
|
|
*/
|
|
|
|
if (dev->log_addr) {
|
|
|
|
munmap((void *)(uintptr_t)dev->log_addr, dev->log_size);
|
|
|
|
}
|
|
|
|
dev->log_addr = (uint64_t)(uintptr_t)addr;
|
|
|
|
dev->log_base = dev->log_addr + off;
|
|
|
|
dev->log_size = size;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* An rarp packet is constructed and broadcasted to notify switches about
|
|
|
|
* the new location of the migrated VM, so that packets from outside will
|
|
|
|
* not be lost after migration.
|
|
|
|
*
|
|
|
|
* However, we don't actually "send" a rarp packet here, instead, we set
|
|
|
|
* a flag 'broadcast_rarp' to let rte_vhost_dequeue_burst() inject it.
|
|
|
|
*/
|
|
|
|
static int
|
2016-08-18 08:48:42 +00:00
|
|
|
vhost_user_send_rarp(struct virtio_net *dev, struct VhostUserMsg *msg)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
|
|
|
uint8_t *mac = (uint8_t *)&msg->payload.u64;
|
2018-04-02 11:46:55 +00:00
|
|
|
struct rte_vdpa_device *vdpa_dev;
|
|
|
|
int did = -1;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
RTE_LOG(DEBUG, VHOST_CONFIG,
|
|
|
|
":: mac: %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
|
|
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
|
|
|
memcpy(dev->mac.addr_bytes, mac, 6);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set the flag to inject a RARP broadcast packet at
|
|
|
|
* rte_vhost_dequeue_burst().
|
|
|
|
*
|
|
|
|
* rte_smp_wmb() is for making sure the mac is copied
|
|
|
|
* before the flag is set.
|
|
|
|
*/
|
|
|
|
rte_smp_wmb();
|
|
|
|
rte_atomic16_set(&dev->broadcast_rarp, 1);
|
2018-04-02 11:46:55 +00:00
|
|
|
did = dev->vdpa_dev_id;
|
|
|
|
vdpa_dev = rte_vdpa_get_device(did);
|
|
|
|
if (vdpa_dev && vdpa_dev->ops->migration_done)
|
|
|
|
vdpa_dev->ops->migration_done(dev->vid);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-03-12 16:33:59 +00:00
|
|
|
static int
|
|
|
|
vhost_user_net_set_mtu(struct virtio_net *dev, struct VhostUserMsg *msg)
|
|
|
|
{
|
|
|
|
if (msg->payload.u64 < VIRTIO_MIN_MTU ||
|
|
|
|
msg->payload.u64 > VIRTIO_MAX_MTU) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG, "Invalid MTU size (%"PRIu64")\n",
|
|
|
|
msg->payload.u64);
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->mtu = msg->payload.u64;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-10-05 08:36:12 +00:00
|
|
|
static int
|
|
|
|
vhost_user_set_req_fd(struct virtio_net *dev, struct VhostUserMsg *msg)
|
|
|
|
{
|
|
|
|
int fd = msg->fds[0];
|
|
|
|
|
|
|
|
if (fd < 0) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"Invalid file descriptor for slave channel (%d)\n",
|
|
|
|
fd);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev->slave_req_fd = fd;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-10-05 08:36:18 +00:00
|
|
|
static int
|
2017-10-05 08:36:25 +00:00
|
|
|
is_vring_iotlb_update(struct vhost_virtqueue *vq, struct vhost_iotlb_msg *imsg)
|
2017-10-05 08:36:18 +00:00
|
|
|
{
|
2017-10-05 08:36:25 +00:00
|
|
|
struct vhost_vring_addr *ra;
|
|
|
|
uint64_t start, end;
|
|
|
|
|
|
|
|
start = imsg->iova;
|
|
|
|
end = start + imsg->size;
|
|
|
|
|
|
|
|
ra = &vq->ring_addrs;
|
|
|
|
if (ra->desc_user_addr >= start && ra->desc_user_addr < end)
|
|
|
|
return 1;
|
|
|
|
if (ra->avail_user_addr >= start && ra->avail_user_addr < end)
|
|
|
|
return 1;
|
|
|
|
if (ra->used_user_addr >= start && ra->used_user_addr < end)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-10-05 08:36:26 +00:00
|
|
|
static int
|
|
|
|
is_vring_iotlb_invalidate(struct vhost_virtqueue *vq,
|
|
|
|
struct vhost_iotlb_msg *imsg)
|
|
|
|
{
|
|
|
|
uint64_t istart, iend, vstart, vend;
|
|
|
|
|
|
|
|
istart = imsg->iova;
|
|
|
|
iend = istart + imsg->size - 1;
|
|
|
|
|
|
|
|
vstart = (uintptr_t)vq->desc;
|
|
|
|
vend = vstart + sizeof(struct vring_desc) * vq->size - 1;
|
|
|
|
if (vstart <= iend && istart <= vend)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
vstart = (uintptr_t)vq->avail;
|
|
|
|
vend = vstart + sizeof(struct vring_avail);
|
|
|
|
vend += sizeof(uint16_t) * vq->size - 1;
|
|
|
|
if (vstart <= iend && istart <= vend)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
vstart = (uintptr_t)vq->used;
|
|
|
|
vend = vstart + sizeof(struct vring_used);
|
|
|
|
vend += sizeof(struct vring_used_elem) * vq->size - 1;
|
|
|
|
if (vstart <= iend && istart <= vend)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-10-05 08:36:25 +00:00
|
|
|
static int
|
|
|
|
vhost_user_iotlb_msg(struct virtio_net **pdev, struct VhostUserMsg *msg)
|
|
|
|
{
|
|
|
|
struct virtio_net *dev = *pdev;
|
2017-10-05 08:36:18 +00:00
|
|
|
struct vhost_iotlb_msg *imsg = &msg->payload.iotlb;
|
|
|
|
uint16_t i;
|
2018-01-23 18:01:45 +00:00
|
|
|
uint64_t vva, len;
|
2017-10-05 08:36:18 +00:00
|
|
|
|
|
|
|
switch (imsg->type) {
|
|
|
|
case VHOST_IOTLB_UPDATE:
|
2018-01-23 18:01:45 +00:00
|
|
|
len = imsg->size;
|
|
|
|
vva = qva_to_vva(dev, imsg->uaddr, &len);
|
2017-10-05 08:36:18 +00:00
|
|
|
if (!vva)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
for (i = 0; i < dev->nr_vring; i++) {
|
|
|
|
struct vhost_virtqueue *vq = dev->virtqueue[i];
|
|
|
|
|
|
|
|
vhost_user_iotlb_cache_insert(vq, imsg->iova, vva,
|
2018-01-23 18:01:45 +00:00
|
|
|
len, imsg->perm);
|
2017-10-05 08:36:25 +00:00
|
|
|
|
|
|
|
if (is_vring_iotlb_update(vq, imsg))
|
|
|
|
*pdev = dev = translate_ring_addresses(dev, i);
|
2017-10-05 08:36:18 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
case VHOST_IOTLB_INVALIDATE:
|
|
|
|
for (i = 0; i < dev->nr_vring; i++) {
|
|
|
|
struct vhost_virtqueue *vq = dev->virtqueue[i];
|
|
|
|
|
|
|
|
vhost_user_iotlb_cache_remove(vq, imsg->iova,
|
|
|
|
imsg->size);
|
2017-10-05 08:36:26 +00:00
|
|
|
|
|
|
|
if (is_vring_iotlb_invalidate(vq, imsg))
|
|
|
|
vring_invalidate(dev, vq);
|
2017-10-05 08:36:18 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG, "Invalid IOTLB message type (%d)\n",
|
|
|
|
imsg->type);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
/* return bytes# of read on success or negative val on failure. */
|
|
|
|
static int
|
|
|
|
read_vhost_message(int sockfd, struct VhostUserMsg *msg)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = read_fd_message(sockfd, (char *)msg, VHOST_USER_HDR_SIZE,
|
|
|
|
msg->fds, VHOST_MEMORY_MAX_NREGIONS);
|
|
|
|
if (ret <= 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (msg && msg->size) {
|
|
|
|
if (msg->size > sizeof(msg->payload)) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"invalid msg size: %d\n", msg->size);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
ret = read(sockfd, &msg->payload, msg->size);
|
|
|
|
if (ret <= 0)
|
|
|
|
return ret;
|
|
|
|
if (ret != (int)msg->size) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"read control message failed\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2018-03-06 10:43:26 +00:00
|
|
|
send_vhost_message(int sockfd, struct VhostUserMsg *msg, int *fds, int fd_num)
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
{
|
2017-10-05 08:36:11 +00:00
|
|
|
if (!msg)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return send_fd_message(sockfd, (char *)msg,
|
2018-03-06 10:43:26 +00:00
|
|
|
VHOST_USER_HDR_SIZE + msg->size, fds, fd_num);
|
2017-10-05 08:36:11 +00:00
|
|
|
}
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2017-10-05 08:36:11 +00:00
|
|
|
static int
|
|
|
|
send_vhost_reply(int sockfd, struct VhostUserMsg *msg)
|
|
|
|
{
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
if (!msg)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
msg->flags &= ~VHOST_USER_VERSION_MASK;
|
2016-12-12 17:54:00 +00:00
|
|
|
msg->flags &= ~VHOST_USER_NEED_REPLY;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
msg->flags |= VHOST_USER_VERSION;
|
|
|
|
msg->flags |= VHOST_USER_REPLY_MASK;
|
|
|
|
|
2018-03-06 10:43:26 +00:00
|
|
|
return send_vhost_message(sockfd, msg, NULL, 0);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
2018-06-08 03:22:23 +00:00
|
|
|
static int
|
|
|
|
send_vhost_slave_message(struct virtio_net *dev, struct VhostUserMsg *msg,
|
|
|
|
int *fds, int fd_num)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (msg->flags & VHOST_USER_NEED_REPLY)
|
|
|
|
rte_spinlock_lock(&dev->slave_req_lock);
|
|
|
|
|
|
|
|
ret = send_vhost_message(dev->slave_req_fd, msg, fds, fd_num);
|
|
|
|
if (ret < 0 && (msg->flags & VHOST_USER_NEED_REPLY))
|
|
|
|
rte_spinlock_unlock(&dev->slave_req_lock);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2017-03-02 06:16:07 +00:00
|
|
|
/*
|
|
|
|
* Allocate a queue pair if it hasn't been allocated yet
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
vhost_user_check_and_alloc_queue_pair(struct virtio_net *dev, VhostUserMsg *msg)
|
|
|
|
{
|
|
|
|
uint16_t vring_idx;
|
|
|
|
|
2017-10-10 12:47:54 +00:00
|
|
|
switch (msg->request.master) {
|
2017-03-02 06:16:07 +00:00
|
|
|
case VHOST_USER_SET_VRING_KICK:
|
|
|
|
case VHOST_USER_SET_VRING_CALL:
|
|
|
|
case VHOST_USER_SET_VRING_ERR:
|
|
|
|
vring_idx = msg->payload.u64 & VHOST_USER_VRING_IDX_MASK;
|
|
|
|
break;
|
|
|
|
case VHOST_USER_SET_VRING_NUM:
|
|
|
|
case VHOST_USER_SET_VRING_BASE:
|
|
|
|
case VHOST_USER_SET_VRING_ENABLE:
|
|
|
|
vring_idx = msg->payload.state.index;
|
|
|
|
break;
|
|
|
|
case VHOST_USER_SET_VRING_ADDR:
|
|
|
|
vring_idx = msg->payload.addr.index;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-04-01 07:22:47 +00:00
|
|
|
if (vring_idx >= VHOST_MAX_VRING) {
|
2017-03-02 06:16:07 +00:00
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"invalid vring index: %u\n", vring_idx);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2017-04-01 07:22:47 +00:00
|
|
|
if (dev->virtqueue[vring_idx])
|
2017-03-02 06:16:07 +00:00
|
|
|
return 0;
|
|
|
|
|
2017-04-01 07:22:47 +00:00
|
|
|
return alloc_vring_queue(dev, vring_idx);
|
2017-03-02 06:16:07 +00:00
|
|
|
}
|
|
|
|
|
2018-01-17 13:49:25 +00:00
|
|
|
static void
|
|
|
|
vhost_user_lock_all_queue_pairs(struct virtio_net *dev)
|
|
|
|
{
|
|
|
|
unsigned int i = 0;
|
|
|
|
unsigned int vq_num = 0;
|
|
|
|
|
|
|
|
while (vq_num < dev->nr_vring) {
|
|
|
|
struct vhost_virtqueue *vq = dev->virtqueue[i];
|
|
|
|
|
|
|
|
if (vq) {
|
|
|
|
rte_spinlock_lock(&vq->access_lock);
|
|
|
|
vq_num++;
|
|
|
|
}
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
vhost_user_unlock_all_queue_pairs(struct virtio_net *dev)
|
|
|
|
{
|
|
|
|
unsigned int i = 0;
|
|
|
|
unsigned int vq_num = 0;
|
|
|
|
|
|
|
|
while (vq_num < dev->nr_vring) {
|
|
|
|
struct vhost_virtqueue *vq = dev->virtqueue[i];
|
|
|
|
|
|
|
|
if (vq) {
|
|
|
|
rte_spinlock_unlock(&vq->access_lock);
|
|
|
|
vq_num++;
|
|
|
|
}
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
int
|
|
|
|
vhost_user_msg_handler(int vid, int fd)
|
|
|
|
{
|
2016-08-18 08:48:42 +00:00
|
|
|
struct virtio_net *dev;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
struct VhostUserMsg msg;
|
2018-04-02 11:46:55 +00:00
|
|
|
struct rte_vdpa_device *vdpa_dev;
|
|
|
|
int did = -1;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
int ret;
|
2018-01-17 13:49:25 +00:00
|
|
|
int unlock_required = 0;
|
2018-04-05 16:01:30 +00:00
|
|
|
uint32_t skip_master = 0;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2016-08-18 08:48:42 +00:00
|
|
|
dev = get_device(vid);
|
|
|
|
if (dev == NULL)
|
|
|
|
return -1;
|
|
|
|
|
2017-04-01 07:22:42 +00:00
|
|
|
if (!dev->notify_ops) {
|
|
|
|
dev->notify_ops = vhost_driver_callback_get(dev->ifname);
|
|
|
|
if (!dev->notify_ops) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"failed to get callback ops for driver %s\n",
|
|
|
|
dev->ifname);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
ret = read_vhost_message(fd, &msg);
|
2017-10-10 12:47:54 +00:00
|
|
|
if (ret <= 0 || msg.request.master >= VHOST_USER_MAX) {
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
if (ret < 0)
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"vhost read message failed\n");
|
|
|
|
else if (ret == 0)
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"vhost peer closed\n");
|
|
|
|
else
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"vhost read incorrect message\n");
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2016-12-12 17:54:00 +00:00
|
|
|
ret = 0;
|
2017-10-10 12:47:54 +00:00
|
|
|
if (msg.request.master != VHOST_USER_IOTLB_MSG)
|
2017-10-05 08:36:25 +00:00
|
|
|
RTE_LOG(INFO, VHOST_CONFIG, "read message %s\n",
|
2017-10-10 12:47:54 +00:00
|
|
|
vhost_message_str[msg.request.master]);
|
2017-10-05 08:36:25 +00:00
|
|
|
else
|
|
|
|
RTE_LOG(DEBUG, VHOST_CONFIG, "read message %s\n",
|
2017-10-10 12:47:54 +00:00
|
|
|
vhost_message_str[msg.request.master]);
|
2017-03-02 06:16:07 +00:00
|
|
|
|
|
|
|
ret = vhost_user_check_and_alloc_queue_pair(dev, &msg);
|
|
|
|
if (ret < 0) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"failed to alloc queue\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2018-01-17 13:49:25 +00:00
|
|
|
/*
|
2018-02-12 15:46:12 +00:00
|
|
|
* Note: we don't lock all queues on VHOST_USER_GET_VRING_BASE
|
|
|
|
* and VHOST_USER_RESET_OWNER, since it is sent when virtio stops
|
|
|
|
* and device is destroyed. destroy_device waits for queues to be
|
|
|
|
* inactive, so it is safe. Otherwise taking the access_lock
|
|
|
|
* would cause a dead lock.
|
2018-01-17 13:49:25 +00:00
|
|
|
*/
|
|
|
|
switch (msg.request.master) {
|
|
|
|
case VHOST_USER_SET_FEATURES:
|
|
|
|
case VHOST_USER_SET_PROTOCOL_FEATURES:
|
|
|
|
case VHOST_USER_SET_OWNER:
|
|
|
|
case VHOST_USER_SET_MEM_TABLE:
|
|
|
|
case VHOST_USER_SET_LOG_BASE:
|
|
|
|
case VHOST_USER_SET_LOG_FD:
|
|
|
|
case VHOST_USER_SET_VRING_NUM:
|
|
|
|
case VHOST_USER_SET_VRING_ADDR:
|
|
|
|
case VHOST_USER_SET_VRING_BASE:
|
|
|
|
case VHOST_USER_SET_VRING_KICK:
|
|
|
|
case VHOST_USER_SET_VRING_CALL:
|
|
|
|
case VHOST_USER_SET_VRING_ERR:
|
|
|
|
case VHOST_USER_SET_VRING_ENABLE:
|
|
|
|
case VHOST_USER_SEND_RARP:
|
|
|
|
case VHOST_USER_NET_SET_MTU:
|
|
|
|
case VHOST_USER_SET_SLAVE_REQ_FD:
|
|
|
|
vhost_user_lock_all_queue_pairs(dev);
|
|
|
|
unlock_required = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
2018-04-05 16:01:30 +00:00
|
|
|
if (dev->extern_ops.pre_msg_handle) {
|
|
|
|
uint32_t need_reply;
|
|
|
|
|
|
|
|
ret = (*dev->extern_ops.pre_msg_handle)(dev->vid,
|
|
|
|
(void *)&msg, &need_reply, &skip_master);
|
|
|
|
if (ret < 0)
|
|
|
|
goto skip_to_reply;
|
|
|
|
|
|
|
|
if (need_reply)
|
|
|
|
send_vhost_reply(fd, &msg);
|
|
|
|
|
|
|
|
if (skip_master)
|
|
|
|
goto skip_to_post_handle;
|
|
|
|
}
|
|
|
|
|
2017-10-10 12:47:54 +00:00
|
|
|
switch (msg.request.master) {
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
case VHOST_USER_GET_FEATURES:
|
2017-04-01 07:22:41 +00:00
|
|
|
msg.payload.u64 = vhost_user_get_features(dev);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
msg.size = sizeof(msg.payload.u64);
|
2017-10-05 08:36:11 +00:00
|
|
|
send_vhost_reply(fd, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
case VHOST_USER_SET_FEATURES:
|
2017-12-13 08:51:07 +00:00
|
|
|
ret = vhost_user_set_features(dev, msg.payload.u64);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case VHOST_USER_GET_PROTOCOL_FEATURES:
|
2017-11-06 20:38:10 +00:00
|
|
|
vhost_user_get_protocol_features(dev, &msg);
|
2017-10-05 08:36:11 +00:00
|
|
|
send_vhost_reply(fd, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
case VHOST_USER_SET_PROTOCOL_FEATURES:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_set_protocol_features(dev, msg.payload.u64);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case VHOST_USER_SET_OWNER:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_set_owner();
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
case VHOST_USER_RESET_OWNER:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_reset_owner(dev);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case VHOST_USER_SET_MEM_TABLE:
|
2018-05-08 07:10:44 +00:00
|
|
|
ret = vhost_user_set_mem_table(&dev, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case VHOST_USER_SET_LOG_BASE:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_set_log_base(dev, &msg);
|
|
|
|
if (ret)
|
|
|
|
goto skip_to_reply;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
/* it needs a reply */
|
|
|
|
msg.size = sizeof(msg.payload.u64);
|
2017-10-05 08:36:11 +00:00
|
|
|
send_vhost_reply(fd, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
case VHOST_USER_SET_LOG_FD:
|
|
|
|
close(msg.fds[0]);
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG, "not implemented.\n");
|
|
|
|
break;
|
|
|
|
|
|
|
|
case VHOST_USER_SET_VRING_NUM:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_set_vring_num(dev, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
case VHOST_USER_SET_VRING_ADDR:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_set_vring_addr(&dev, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
case VHOST_USER_SET_VRING_BASE:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_set_vring_base(dev, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case VHOST_USER_GET_VRING_BASE:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_get_vring_base(dev, &msg);
|
|
|
|
if (ret)
|
|
|
|
goto skip_to_reply;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
msg.size = sizeof(msg.payload.state);
|
2017-10-05 08:36:11 +00:00
|
|
|
send_vhost_reply(fd, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case VHOST_USER_SET_VRING_KICK:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_set_vring_kick(&dev, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
case VHOST_USER_SET_VRING_CALL:
|
2016-08-18 08:48:42 +00:00
|
|
|
vhost_user_set_vring_call(dev, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case VHOST_USER_SET_VRING_ERR:
|
|
|
|
if (!(msg.payload.u64 & VHOST_USER_VRING_NOFD_MASK))
|
|
|
|
close(msg.fds[0]);
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG, "not implemented\n");
|
|
|
|
break;
|
|
|
|
|
|
|
|
case VHOST_USER_GET_QUEUE_NUM:
|
2018-04-02 11:46:55 +00:00
|
|
|
msg.payload.u64 = (uint64_t)vhost_user_get_queue_num(dev);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
msg.size = sizeof(msg.payload.u64);
|
2017-10-05 08:36:11 +00:00
|
|
|
send_vhost_reply(fd, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case VHOST_USER_SET_VRING_ENABLE:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_set_vring_enable(dev, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
case VHOST_USER_SEND_RARP:
|
2018-09-03 10:12:24 +00:00
|
|
|
ret = vhost_user_send_rarp(dev, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
|
|
|
|
2017-03-12 16:33:59 +00:00
|
|
|
case VHOST_USER_NET_SET_MTU:
|
|
|
|
ret = vhost_user_net_set_mtu(dev, &msg);
|
|
|
|
break;
|
|
|
|
|
2017-10-05 08:36:12 +00:00
|
|
|
case VHOST_USER_SET_SLAVE_REQ_FD:
|
|
|
|
ret = vhost_user_set_req_fd(dev, &msg);
|
|
|
|
break;
|
|
|
|
|
2017-10-05 08:36:18 +00:00
|
|
|
case VHOST_USER_IOTLB_MSG:
|
2017-10-05 08:36:25 +00:00
|
|
|
ret = vhost_user_iotlb_msg(&dev, &msg);
|
2017-10-05 08:36:18 +00:00
|
|
|
break;
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
default:
|
2016-12-12 17:54:00 +00:00
|
|
|
ret = -1;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
break;
|
2018-04-05 16:01:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
skip_to_post_handle:
|
2018-09-03 10:12:24 +00:00
|
|
|
if (!ret && dev->extern_ops.post_msg_handle) {
|
2018-04-05 16:01:30 +00:00
|
|
|
uint32_t need_reply;
|
|
|
|
|
|
|
|
ret = (*dev->extern_ops.post_msg_handle)(
|
|
|
|
dev->vid, (void *)&msg, &need_reply);
|
|
|
|
if (ret < 0)
|
|
|
|
goto skip_to_reply;
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
|
2018-04-05 16:01:30 +00:00
|
|
|
if (need_reply)
|
|
|
|
send_vhost_reply(fd, &msg);
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
}
|
|
|
|
|
2018-04-05 16:01:30 +00:00
|
|
|
skip_to_reply:
|
2018-01-17 13:49:25 +00:00
|
|
|
if (unlock_required)
|
|
|
|
vhost_user_unlock_all_queue_pairs(dev);
|
|
|
|
|
2016-12-12 17:54:00 +00:00
|
|
|
if (msg.flags & VHOST_USER_NEED_REPLY) {
|
|
|
|
msg.payload.u64 = !!ret;
|
|
|
|
msg.size = sizeof(msg.payload.u64);
|
2017-10-05 08:36:11 +00:00
|
|
|
send_vhost_reply(fd, &msg);
|
2018-09-03 10:12:24 +00:00
|
|
|
} else if (ret) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"vhost message handling failed.\n");
|
|
|
|
return -1;
|
2016-12-12 17:54:00 +00:00
|
|
|
}
|
|
|
|
|
2017-04-01 07:22:49 +00:00
|
|
|
if (!(dev->flags & VIRTIO_DEV_RUNNING) && virtio_is_ready(dev)) {
|
|
|
|
dev->flags |= VIRTIO_DEV_READY;
|
|
|
|
|
|
|
|
if (!(dev->flags & VIRTIO_DEV_RUNNING)) {
|
|
|
|
if (dev->dequeue_zero_copy) {
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"dequeue zero copy is enabled\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dev->notify_ops->new_device(dev->vid) == 0)
|
|
|
|
dev->flags |= VIRTIO_DEV_RUNNING;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-04-02 11:46:55 +00:00
|
|
|
did = dev->vdpa_dev_id;
|
|
|
|
vdpa_dev = rte_vdpa_get_device(did);
|
|
|
|
if (vdpa_dev && virtio_is_ready(dev) &&
|
|
|
|
!(dev->flags & VIRTIO_DEV_VDPA_CONFIGURED) &&
|
|
|
|
msg.request.master == VHOST_USER_SET_VRING_ENABLE) {
|
|
|
|
if (vdpa_dev->ops->dev_conf)
|
|
|
|
vdpa_dev->ops->dev_conf(dev->vid);
|
|
|
|
dev->flags |= VIRTIO_DEV_VDPA_CONFIGURED;
|
2018-06-08 03:22:23 +00:00
|
|
|
if (vhost_user_host_notifier_ctrl(dev->vid, true) != 0) {
|
|
|
|
RTE_LOG(INFO, VHOST_CONFIG,
|
|
|
|
"(%d) software relay is used for vDPA, performance may be low.\n",
|
|
|
|
dev->vid);
|
|
|
|
}
|
2018-04-02 11:46:55 +00:00
|
|
|
}
|
|
|
|
|
vhost: refactor code structure
The code structure is a bit messy now. For example, vhost-user message
handling is spread to three different files:
vhost-net-user.c virtio-net.c virtio-net-user.c
Where, vhost-net-user.c is the entrance to handle all those messages
and then invoke the right method for a specific message. Some of them
are stored at virtio-net.c, while others are stored at virtio-net-user.c.
The truth is all of them should be in one file, vhost_user.c.
So this patch refactors the source code structure: mainly on renaming
files and moving code from one file to another file that is more suitable
for storing it. Thus, no functional changes are made.
After the refactor, the code structure becomes to:
- socket.c handles all vhost-user socket file related stuff, such
as, socket file creation for server mode, reconnection
for client mode.
- vhost.c mainly on stuff like vhost device creation/destroy/reset.
Most of the vhost API implementation are there, too.
- vhost_user.c all stuff about vhost-user messages handling goes there.
- virtio_net.c all stuff about virtio-net should go there. It has virtio
net Rx/Tx implementation only so far: it's just a rename
from vhost_rxtx.c
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2016-08-18 08:48:39 +00:00
|
|
|
return 0;
|
|
|
|
}
|
2017-10-05 08:36:16 +00:00
|
|
|
|
2018-06-08 03:22:23 +00:00
|
|
|
static int process_slave_message_reply(struct virtio_net *dev,
|
|
|
|
const VhostUserMsg *msg)
|
|
|
|
{
|
|
|
|
VhostUserMsg msg_reply;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if ((msg->flags & VHOST_USER_NEED_REPLY) == 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (read_vhost_message(dev->slave_req_fd, &msg_reply) < 0) {
|
|
|
|
ret = -1;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (msg_reply.request.slave != msg->request.slave) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"Received unexpected msg type (%u), expected %u\n",
|
|
|
|
msg_reply.request.slave, msg->request.slave);
|
|
|
|
ret = -1;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = msg_reply.payload.u64 ? -1 : 0;
|
|
|
|
|
|
|
|
out:
|
|
|
|
rte_spinlock_unlock(&dev->slave_req_lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2017-10-05 08:36:16 +00:00
|
|
|
int
|
|
|
|
vhost_user_iotlb_miss(struct virtio_net *dev, uint64_t iova, uint8_t perm)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct VhostUserMsg msg = {
|
2017-10-10 12:47:54 +00:00
|
|
|
.request.slave = VHOST_USER_SLAVE_IOTLB_MSG,
|
2017-10-05 08:36:16 +00:00
|
|
|
.flags = VHOST_USER_VERSION,
|
|
|
|
.size = sizeof(msg.payload.iotlb),
|
|
|
|
.payload.iotlb = {
|
|
|
|
.iova = iova,
|
|
|
|
.perm = perm,
|
|
|
|
.type = VHOST_IOTLB_MISS,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2018-03-06 10:43:26 +00:00
|
|
|
ret = send_vhost_message(dev->slave_req_fd, &msg, NULL, 0);
|
2017-10-05 08:36:16 +00:00
|
|
|
if (ret < 0) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"Failed to send IOTLB miss message (%d)\n",
|
|
|
|
ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2018-06-08 03:22:23 +00:00
|
|
|
|
|
|
|
static int vhost_user_slave_set_vring_host_notifier(struct virtio_net *dev,
|
|
|
|
int index, int fd,
|
|
|
|
uint64_t offset,
|
|
|
|
uint64_t size)
|
|
|
|
{
|
|
|
|
int *fdp = NULL;
|
|
|
|
size_t fd_num = 0;
|
|
|
|
int ret;
|
|
|
|
struct VhostUserMsg msg = {
|
|
|
|
.request.slave = VHOST_USER_SLAVE_VRING_HOST_NOTIFIER_MSG,
|
|
|
|
.flags = VHOST_USER_VERSION | VHOST_USER_NEED_REPLY,
|
|
|
|
.size = sizeof(msg.payload.area),
|
|
|
|
.payload.area = {
|
|
|
|
.u64 = index & VHOST_USER_VRING_IDX_MASK,
|
|
|
|
.size = size,
|
|
|
|
.offset = offset,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
if (fd < 0)
|
|
|
|
msg.payload.area.u64 |= VHOST_USER_VRING_NOFD_MASK;
|
|
|
|
else {
|
|
|
|
fdp = &fd;
|
|
|
|
fd_num = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = send_vhost_slave_message(dev, &msg, fdp, fd_num);
|
|
|
|
if (ret < 0) {
|
|
|
|
RTE_LOG(ERR, VHOST_CONFIG,
|
|
|
|
"Failed to set host notifier (%d)\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return process_slave_message_reply(dev, &msg);
|
|
|
|
}
|
|
|
|
|
|
|
|
int vhost_user_host_notifier_ctrl(int vid, bool enable)
|
|
|
|
{
|
|
|
|
struct virtio_net *dev;
|
|
|
|
struct rte_vdpa_device *vdpa_dev;
|
|
|
|
int vfio_device_fd, did, ret = 0;
|
|
|
|
uint64_t offset, size;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
dev = get_device(vid);
|
|
|
|
if (!dev)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
did = dev->vdpa_dev_id;
|
|
|
|
if (did < 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (!(dev->features & (1ULL << VIRTIO_F_VERSION_1)) ||
|
|
|
|
!(dev->features & (1ULL << VHOST_USER_F_PROTOCOL_FEATURES)) ||
|
|
|
|
!(dev->protocol_features &
|
|
|
|
(1ULL << VHOST_USER_PROTOCOL_F_SLAVE_REQ)) ||
|
|
|
|
!(dev->protocol_features &
|
|
|
|
(1ULL << VHOST_USER_PROTOCOL_F_SLAVE_SEND_FD)) ||
|
|
|
|
!(dev->protocol_features &
|
|
|
|
(1ULL << VHOST_USER_PROTOCOL_F_HOST_NOTIFIER)))
|
|
|
|
return -ENOTSUP;
|
|
|
|
|
|
|
|
vdpa_dev = rte_vdpa_get_device(did);
|
2018-06-22 03:53:05 +00:00
|
|
|
if (!vdpa_dev)
|
|
|
|
return -ENODEV;
|
2018-06-08 03:22:23 +00:00
|
|
|
|
|
|
|
RTE_FUNC_PTR_OR_ERR_RET(vdpa_dev->ops->get_vfio_device_fd, -ENOTSUP);
|
|
|
|
RTE_FUNC_PTR_OR_ERR_RET(vdpa_dev->ops->get_notify_area, -ENOTSUP);
|
|
|
|
|
|
|
|
vfio_device_fd = vdpa_dev->ops->get_vfio_device_fd(vid);
|
|
|
|
if (vfio_device_fd < 0)
|
|
|
|
return -ENOTSUP;
|
|
|
|
|
|
|
|
if (enable) {
|
|
|
|
for (i = 0; i < dev->nr_vring; i++) {
|
|
|
|
if (vdpa_dev->ops->get_notify_area(vid, i, &offset,
|
|
|
|
&size) < 0) {
|
|
|
|
ret = -ENOTSUP;
|
|
|
|
goto disable;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (vhost_user_slave_set_vring_host_notifier(dev, i,
|
|
|
|
vfio_device_fd, offset, size) < 0) {
|
|
|
|
ret = -EFAULT;
|
|
|
|
goto disable;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
disable:
|
|
|
|
for (i = 0; i < dev->nr_vring; i++) {
|
|
|
|
vhost_user_slave_set_vring_host_notifier(dev, i, -1,
|
|
|
|
0, 0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|