numam-dpdk/drivers/net/mvpp2/mrvl_ethdev.h

251 lines
6.0 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2017 Marvell International Ltd.
* Copyright(c) 2017 Semihalf.
* All rights reserved.
*/
#ifndef _MRVL_ETHDEV_H_
#define _MRVL_ETHDEV_H_
#include <rte_spinlock.h>
#include <rte_flow_driver.h>
#include <rte_mtr_driver.h>
#include <rte_tm_driver.h>
/*
* container_of is defined by both DPDK and MUSDK,
* we'll declare only one version.
*
* Note that it is not used in this PMD anyway.
*/
#ifdef container_of
#undef container_of
#endif
#include <env/mv_autogen_comp_flags.h>
#include <drivers/mv_pp2.h>
#include <drivers/mv_pp2_bpool.h>
#include <drivers/mv_pp2_cls.h>
#include <drivers/mv_pp2_hif.h>
#include <drivers/mv_pp2_ppio.h>
#include "env/mv_common.h" /* for BIT() */
/** Maximum number of rx queues per port */
#define MRVL_PP2_RXQ_MAX 32
/** Maximum number of tx queues per port */
#define MRVL_PP2_TXQ_MAX 8
/** Minimum number of descriptors in tx queue */
#define MRVL_PP2_TXD_MIN 16
/** Maximum number of descriptors in tx queue */
#define MRVL_PP2_TXD_MAX 2048
/** Tx queue descriptors alignment */
#define MRVL_PP2_TXD_ALIGN 16
/** Minimum number of descriptors in rx queue */
#define MRVL_PP2_RXD_MIN 16
/** Maximum number of descriptors in rx queue */
#define MRVL_PP2_RXD_MAX 2048
/** Rx queue descriptors alignment */
#define MRVL_PP2_RXD_ALIGN 16
/** Maximum number of descriptors in tx aggregated queue */
#define MRVL_PP2_AGGR_TXQD_MAX 2048
/** Maximum number of Traffic Classes. */
#define MRVL_PP2_TC_MAX 8
/** Packet offset inside RX buffer. */
#define MRVL_PKT_OFFS 64
/** Maximum number of descriptors in shadow queue. Must be power of 2 */
#define MRVL_PP2_TX_SHADOWQ_SIZE MRVL_PP2_TXD_MAX
/** Shadow queue size mask (since shadow queue size is power of 2) */
#define MRVL_PP2_TX_SHADOWQ_MASK (MRVL_PP2_TX_SHADOWQ_SIZE - 1)
/** Minimum number of sent buffers to release from shadow queue to BM */
#define MRVL_PP2_BUF_RELEASE_BURST_SIZE 64
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
#define MRVL_PP2_VLAN_TAG_LEN 4
#define MRVL_PP2_ETH_HDRS_LEN (RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN + \
(2 * MRVL_PP2_VLAN_TAG_LEN))
#define MRVL_PP2_HDRS_LEN (MV_MH_SIZE + MRVL_PP2_ETH_HDRS_LEN)
#define MRVL_PP2_MTU_TO_MRU(mtu) ((mtu) + MRVL_PP2_HDRS_LEN)
#define MRVL_PP2_MRU_TO_MTU(mru) ((mru) - MRVL_PP2_HDRS_LEN)
/** Maximum length of a match string */
#define MRVL_MATCH_LEN 16
#define MRVL_BURST_SIZE 64
/** PMD-specific definition of a flow rule handle. */
struct mrvl_mtr;
struct rte_flow {
LIST_ENTRY(rte_flow) next;
struct mrvl_mtr *mtr;
struct pp2_cls_tbl_key table_key;
struct pp2_cls_tbl_rule rule;
struct pp2_cls_cos_desc cos;
struct pp2_cls_tbl_action action;
uint8_t next_udf_id;
};
struct mrvl_mtr_profile {
LIST_ENTRY(mrvl_mtr_profile) next;
uint32_t profile_id;
int refcnt;
struct rte_mtr_meter_profile profile;
};
struct mrvl_mtr {
LIST_ENTRY(mrvl_mtr) next;
uint32_t mtr_id;
int refcnt;
int shared;
int enabled;
int plcr_bit;
struct mrvl_mtr_profile *profile;
struct pp2_cls_plcr *plcr;
};
struct mrvl_tm_shaper_profile {
LIST_ENTRY(mrvl_tm_shaper_profile) next;
uint32_t id;
int refcnt;
struct rte_tm_shaper_params params;
};
enum {
MRVL_NODE_PORT,
MRVL_NODE_QUEUE,
};
struct mrvl_tm_node {
LIST_ENTRY(mrvl_tm_node) next;
uint32_t id;
uint32_t type;
int refcnt;
struct mrvl_tm_node *parent;
struct mrvl_tm_shaper_profile *profile;
uint8_t weight;
uint64_t stats_mask;
};
struct mrvl_priv {
/* Hot fields, used in fast path. */
struct pp2_bpool *bpool; /**< BPool pointer */
struct pp2_ppio *ppio; /**< Port handler pointer */
rte_spinlock_t lock; /**< Spinlock for checking bpool status */
uint16_t bpool_max_size; /**< BPool maximum size */
uint16_t bpool_min_size; /**< BPool minimum size */
uint16_t bpool_init_size; /**< Configured BPool size */
/** Mapping for DPDK rx queue->(TC, MRVL relative inq) */
struct {
uint8_t tc; /**< Traffic Class */
uint8_t inq; /**< Relative in-queue number */
} rxq_map[MRVL_PP2_RXQ_MAX] __rte_cache_aligned;
/* Configuration data, used sporadically. */
uint8_t pp_id;
uint8_t ppio_id;
uint8_t bpool_bit;
uint8_t rss_hf_tcp;
uint8_t uc_mc_flushed;
uint8_t isolated;
uint8_t multiseg;
uint16_t max_mtu;
uint8_t flow_ctrl;
struct rte_eth_fc_conf fc_conf;
struct pp2_ppio_params ppio_params;
struct pp2_cls_qos_tbl_params qos_tbl_params;
struct pp2_cls_tbl *qos_tbl;
uint16_t nb_rx_queues;
struct pp2_cls_tbl_params cls_tbl_params;
struct pp2_cls_tbl *cls_tbl;
LIST_HEAD(mrvl_flows, rte_flow) flows;
struct pp2_cls_plcr *default_policer;
LIST_HEAD(profiles, mrvl_mtr_profile) profiles;
LIST_HEAD(mtrs, mrvl_mtr) mtrs;
uint32_t used_plcrs;
LIST_HEAD(shaper_profiles, mrvl_tm_shaper_profile) shaper_profiles;
LIST_HEAD(nodes, mrvl_tm_node) nodes;
uint64_t rate_max;
uint8_t forward_bad_frames;
uint32_t fill_bpool_buffs;
};
/** Flow operations forward declaration. */
extern const struct rte_flow_ops mrvl_flow_ops;
/** Meter operations forward declaration. */
extern const struct rte_mtr_ops mrvl_mtr_ops;
/** Traffic manager operations forward declaration. */
extern const struct rte_tm_ops mrvl_tm_ops;
/** Current log type. */
extern int mrvl_logtype;
#define MRVL_LOG(level, fmt, args...) \
rte_log(RTE_LOG_ ## level, mrvl_logtype, "%s(): " fmt "\n", \
__func__, ##args)
extern struct pp2_bpool *dummy_pool[PP2_NUM_PKT_PROC];
/**
* Convert string to uint32_t with extra checks for result correctness.
*
* @param string String to convert.
* @param val Conversion result.
* @returns 0 in case of success, negative value otherwise.
*/
static int
get_val_securely(const char *string, uint32_t *val)
{
char *endptr;
size_t len = strlen(string);
if (len == 0)
return -1;
errno = 0;
*val = strtoul(string, &endptr, 0);
if (errno != 0 || RTE_PTR_DIFF(endptr, string) != len)
return -2;
return 0;
}
static int
get_val_securely8(const char *string, uint32_t base, uint8_t *val)
{
char *endptr;
size_t len = strlen(string);
if (len == 0)
return -1;
errno = 0;
*val = (uint8_t)strtoul(string, &endptr, base);
if (errno != 0 || RTE_PTR_DIFF(endptr, string) != len)
return -2;
return 0;
}
#endif /* _MRVL_ETHDEV_H_ */