numam-dpdk/drivers/net/mlx5/mlx5_mac.c

233 lines
5.3 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2015 6WIND S.A.
* Copyright 2015 Mellanox Technologies, Ltd
*/
#include <stddef.h>
#include <assert.h>
#include <stdint.h>
#include <string.h>
#include <inttypes.h>
#include <errno.h>
#include <netinet/in.h>
#include <sys/ioctl.h>
#include <arpa/inet.h>
/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
#ifdef PEDANTIC
#pragma GCC diagnostic ignored "-Wpedantic"
#endif
#include <infiniband/verbs.h>
#ifdef PEDANTIC
#pragma GCC diagnostic error "-Wpedantic"
#endif
#include <rte_ether.h>
#include <rte_ethdev_driver.h>
#include <rte_common.h>
#include "mlx5.h"
#include "mlx5_utils.h"
#include "mlx5_rxtx.h"
#include "mlx5_defs.h"
/**
* Get MAC address by querying netdevice.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[out] mac
* MAC address output buffer.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
mlx5_get_mac(struct rte_eth_dev *dev, uint8_t (*mac)[RTE_ETHER_ADDR_LEN])
{
struct ifreq request;
int ret;
ret = mlx5_ifreq(dev, SIOCGIFHWADDR, &request);
if (ret)
return ret;
net: add rte prefix to ether defines Add 'RTE_' prefix to defines: - rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN. - rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN. - rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN. - rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN. - rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN. - rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN. - rename ETHER_MTU as RTE_ETHER_MTU. - rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN. - rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID. - rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN. - rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU. - rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR. - rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR. - rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4. - rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6. - rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP. - rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN. - rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP. - rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ. - rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG. - rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588. - rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW. - rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB. - rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP. - rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS. - rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM. - rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN. - rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE. - rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4. - rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6. - rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH. - rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH. - rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS. - rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP. - rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG. - rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN. Do not update the command line library to avoid adding a dependency to librte_net. Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-21 16:13:05 +00:00
memcpy(mac, request.ifr_hwaddr.sa_data, RTE_ETHER_ADDR_LEN);
return 0;
}
/**
* Remove a MAC address from the internal array.
*
* @param dev
* Pointer to Ethernet device structure.
* @param index
* MAC address index.
*/
static void
mlx5_internal_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
{
struct mlx5_priv *priv = dev->data->dev_private;
const int vf = priv->config.vf;
assert(index < MLX5_MAX_MAC_ADDRESSES);
if (rte_is_zero_ether_addr(&dev->data->mac_addrs[index]))
return;
if (vf)
mlx5_nl_mac_addr_remove(dev, &dev->data->mac_addrs[index],
index);
memset(&dev->data->mac_addrs[index], 0, sizeof(struct rte_ether_addr));
mlx5: refactor Rx code for the new verbs RSS API The new Verbs RSS API is lower-level than the previous one and much more flexible but requires RX queues to use Work Queues (WQs) internally instead of Queue Pairs (QPs), which are grouped in an indirection table used by a new kind of hash RX QPs. Hash RX QPs and the indirection table together replace the parent RSS QP while WQs are mostly similar to child QPs. RSS hash key is not configurable yet. Summary of changes: - Individual DPDK RX queues do not store flow properties anymore, this info is now part of the hash RX queues. - All functions affecting the parent queue when RSS is enabled or the basic queues otherwise are modified to affect hash RX queues instead. - Hash RX queues are also used when a single DPDK RX queue is configured (no RSS) to remove that special case. - Hash RX queues and indirection table are created/destroyed when device is started/stopped in addition to create/destroy flows. - Contrary to QPs, WQs are moved to the "ready" state before posting RX buffers, otherwise they are ignored. - Resource domain information is added to WQs for better performance. - CQs are not resized anymore when switching between non-SG and SG modes as it does not work correctly with WQs. Use the largest possible size instead, since CQ size does not have to be the same as the number of elements in the RX queue. This also applies to the maximum number of outstanding WRs in a WQ (max_recv_wr). Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
2015-10-30 18:55:06 +00:00
}
/**
* Adds a MAC address to the internal array.
*
* @param dev
* Pointer to Ethernet device structure.
* @param mac_addr
* MAC address to register.
* @param index
* MAC address index.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_internal_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac,
uint32_t index)
{
struct mlx5_priv *priv = dev->data->dev_private;
const int vf = priv->config.vf;
unsigned int i;
assert(index < MLX5_MAX_MAC_ADDRESSES);
if (rte_is_zero_ether_addr(mac)) {
rte_errno = EINVAL;
return -rte_errno;
}
/* First, make sure this address isn't already configured. */
for (i = 0; (i != MLX5_MAX_MAC_ADDRESSES); ++i) {
/* Skip this index, it's going to be reconfigured. */
if (i == index)
continue;
if (memcmp(&dev->data->mac_addrs[i], mac, sizeof(*mac)))
continue;
/* Address already configured elsewhere, return with error. */
rte_errno = EADDRINUSE;
return -rte_errno;
}
if (vf) {
int ret = mlx5_nl_mac_addr_add(dev, mac, index);
if (ret)
return ret;
}
dev->data->mac_addrs[index] = *mac;
return 0;
}
/**
* DPDK callback to remove a MAC address.
*
* @param dev
* Pointer to Ethernet device structure.
* @param index
* MAC address index.
*/
void
mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
{
int ret;
if (index >= MLX5_MAX_UC_MAC_ADDRESSES)
return;
mlx5_internal_mac_addr_remove(dev, index);
if (!dev->data->promiscuous) {
ret = mlx5_traffic_restart(dev);
if (ret)
DRV_LOG(ERR, "port %u cannot restart traffic: %s",
dev->data->port_id, strerror(rte_errno));
}
}
/**
* DPDK callback to add a MAC address.
*
* @param dev
* Pointer to Ethernet device structure.
* @param mac_addr
* MAC address to register.
* @param index
* MAC address index.
* @param vmdq
* VMDq pool index to associate address with (ignored).
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac,
uint32_t index, uint32_t vmdq __rte_unused)
{
int ret;
if (index >= MLX5_MAX_UC_MAC_ADDRESSES) {
rte_errno = EINVAL;
return -rte_errno;
}
ret = mlx5_internal_mac_addr_add(dev, mac, index);
if (ret < 0)
return ret;
if (!dev->data->promiscuous)
return mlx5_traffic_restart(dev);
return 0;
}
/**
* DPDK callback to set primary MAC address.
*
* @param dev
* Pointer to Ethernet device structure.
* @param mac_addr
* MAC address to register.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_mac_addr_set(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr)
{
DRV_LOG(DEBUG, "port %u setting primary MAC address",
dev->data->port_id);
return mlx5_mac_addr_add(dev, mac_addr, 0, 0);
}
/**
* DPDK callback to set multicast addresses list.
*
* @see rte_eth_dev_set_mc_addr_list()
*/
int
mlx5_set_mc_addr_list(struct rte_eth_dev *dev,
struct rte_ether_addr *mc_addr_set, uint32_t nb_mc_addr)
{
uint32_t i;
int ret;
if (nb_mc_addr >= MLX5_MAX_MC_MAC_ADDRESSES) {
rte_errno = ENOSPC;
return -rte_errno;
}
for (i = MLX5_MAX_UC_MAC_ADDRESSES; i != MLX5_MAX_MAC_ADDRESSES; ++i)
mlx5_internal_mac_addr_remove(dev, i);
i = MLX5_MAX_UC_MAC_ADDRESSES;
while (nb_mc_addr--) {
ret = mlx5_internal_mac_addr_add(dev, mc_addr_set++, i++);
if (ret)
return ret;
}
if (!dev->data->promiscuous)
return mlx5_traffic_restart(dev);
return 0;
}